Search

With the advancement of testing tools, the ability to characterize mechanical properties of fiber reinforced polymer (FRP) composites under extreme loading scenarios has allowed designers to use these materials in high-level applications more confidently. Conventionally, impact characterization of composite materials is studied via nondestructive techniques such as ultrasonic C-scanning, infrared thermography, X-ray, and acoustography. None of these techniques, however, enable 3D microscale visualization of the damage at different layers of composite laminates. In this paper, a 3D microtomographic technique has been employed to visualize and compare impact damage modes in a set of thermoplastic laminates. The test samples were made of commingled polypropylene (PP) and glass fibers with two different architectures, including the plain woven and unidirectional. Impact testing using a drop-weight tower, followed by postimpact four-point flexural testing and nondestructive tomographic analysis demonstrated a close relationship between the type of fibre architecture and the induced impact damage mechanisms and their extensions.

Sodium superionic conductor (NASICON)-type lithium aluminum germanium phosphate (LAGP) has attracted increasing attention as a solid electrolyte for all-solid-state lithium-ion batteries (ASSLIBs), due to the good ionic conductivity and highly stable interface with Li metal. However, it still remains challenging to achieve high density and good ionic conductivity in LAGP pellets by using conventional sintering methods, because they required high temperatures (>800 °C) and long sintering time (>6 h), which could cause the loss of lithium, the formation of impurity phases, and thus the reduction of ionic conductivity. Herein, we report the utilization of a spark plasma sintering (SPS) method to synthesize LAGP pellets with a density of 3.477 g cm -3 , a relative high density up to 97.6%, and a good ionic conductivity of 3.29 × 10 -4 S cm -1 . In contrast to the dry-pressing process followed with high-temperature annealing, the optimized SPS process only required a low operating temperature of 650 °C and short sintering time of 10 min. Despite the least energy and short time consumption, the SPS approach could still achieve LAGP pellets with high density, little voids and cracks, intimate grain-grain boundary, and high ionic conductivity. These advantages suggest the great potential of SPS as a fabrication technique for preparing solid electrolytes and composite electrodes used in ASSLIBs.

Cerium dioxide (CeO 2 ) is a surrogate material for traditional nuclear fuels and an essential material for a wide variety of industrial applications both in its bulk and nanometer length scale. Despite this fact, the underlying physics of thermal conductivity (k L ), a crucial design parameter in industrial applications, has not received enough attention. In this article, a systematic investigation of the phonon transport properties was performed using ab initio calculations unified with the Boltzmann transport equation. An extensive examination of the phonon mode contribution, available three-phonon scattering phase space, mode Grüneisen parameter and mean free path (MFP) distributions were also conducted. To further augment theoretical predictions of the k L , measurements were made on specimens prepared by spark plasma sintering using the laser flash technique. Since the sample porosity plays a vital role in the value of measured k L , the effect of porosity on k L by molecular dynamics (MD) simulations were investigated. Finally, we also determined the nanostructuring effect on the thermal properties of CeO 2 . Since CeO 2 films find application in various industries, the dependence of thickness on the in-plane and cross-plane k L for an infinite CeO 2 thin film was also reported.

Coordination of dicobalt hexacarbonyl to the alkyne moiety of norbornene complexes containing either ferrocene or η(6) -chlorobenzene-η(5) -cyclopentadienyliron hexafluorophosphate, gave two unique trimetallic complexes available for ROMP. Polymerization of each monomer using Grubbs second generation catalyst gave organoiron/organocobalt polynorbornenes with weight average molecular weights between 55 300 and 69 000 with PDIs between 1.2 and 1.9. Cyclic voltammetric studies of the monomers and polymers at -40 °C showed a reversible reduction for cationic complexes containing η(6) -benzene-η(5) -cyclopentadienyliron and for the dicobalt hexacarbonyl moieties while, a reversible oxidation for the ferrocene containing complex was observed. Thermal analysis showed that the cobalt carbonyl moiety of the polymers degraded near 130 °C; however, the polymeric backbone was stable up to 350 °C. Scanning electron microscopy (SEM) and SEM-EDS indicated that the polymers possessed a fine globular morphology and that the distribution of iron and cobalt atoms was homogenous on the macro-scale., (Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)