Search

Aim: The aim of this study was to assess the sensitivity of orthopantomography (OPT) in the diagnosis of long term complications in oral rehabilitations with blade implants. Materials and methods A total of 235 blade implants in 189 patients, inserted between 1988 and 2003, were retrospectively analyzed. The records consisted of a first OPT taken between January and December 2010, and a second one 12 months after. The evaluation of implant health considered: integrity of the blade, normal radiological representation of the bone around the implant, dense and cortical appearance of bone around the implant collar. The evaluation of radiological complications considered: implant fracture, bone resorption around the implant, recession of the bone around the implant collar. Results The sensitivity of the panoramic evaluation was equal to 100%. The complications detected were 5 cases of periimplantitis, 9 cases of bone pericervical bone recession and 3 cases of fracture of the implant body. In cases of pericervical bone resorption the following radiological check up 12 months after the first one showed the progression of the disease in 6 out of 9 cases, with irreversible implant failure. In subjects with a radiological pattern of implant health there were no complications in the subsequent check up after 12 months. In the subjects with complications the specificity was equal to 100%. Conclusion The radiographic evaluation by the means of OPT has shown high sensitivity in the diagnosis of long term complications of oral rehabilitations with blade implants and allows prompt therapeutic interventions. Radiological complications appeared mostly in the long term check ups and mainly consisted in recession of the bone around the neck or around the entire implant. More rarely implant fractures occurred, which, in the case of blades, sometimes were not associated with any clinical symptoms: therefore, postsurgical evaluation should not be separated from diagnostic imaging.

The aim of this issue is to describe endosseous distal extension (EDE) surgical technique. This implant technique was conceived and applied since 1993 by Dr Luca Dal Carlo, as an evolution of the classical ramus blade implant technique. With this technique, you attain great stability of the blade implant, due to the following difference compared with the classical blade implant technique: the hard and soft tissues lying behind implant abutment are not being destroyed at all. A slot is made on the upper side of the bone ridge, and the blade is inserted into it and pushed backwards, so that the implant is embedded under untouched tissues. Using blade implants specially drawn for this particular surgery, the slot's length turns out to be about half of the implant's length. Piezo bistoury is useful to facilitate surgical proceedings. If we compare the regenerated bone on the mesial part of the implant and the bone that had remained untouched on the distal side, we will see a difference in the tissue density even after a long time. EDE technique is suitable for those cases in which the lower distal sector is characterized by scarceness of cancellous bone. Data collected during 22 years of clinical practice (97.7% 5-year success rate) allow to suggest employing this technique with asymmetric blades to treat D3-D4 narrow ridges located in the posterior mandible. Soft tissue response results are very good.

The presence of periodontal disease can be ascertained by clinical examination (redness, edema and probe depth, bleeding-on-probing). Occlusal adjustment can lead to a marked, stable improvement in periodontal health in terms of bacterial profile and clinical appearance, presumably by obviating tissue distress caused by occlusal dysfunction, thereby providing unfavorable conditions for bacterial growth. Therefore, occlusal trauma can be an essential indicator of the periodontal disease and, if not corrected, could lead to a relapse.

The authors present an implant prosthesis procedure that uses screws on one-piece implants connected with a titanium pin at their abutment level and one supporter titanium bar in order to guarantee immediate stabilization. These can be implanted and fitted with customized temporary crowns in a single surgical procedure, restoring function and aesthetics and consenting recovery of the bone deficit with reduced healing times and limited patient discomfort. One-piece wide-diameter titanium screw implants with thread measurements of 2.1 and 2.6 mm (smaller diameter) up to diameter of 4.5 mm with one abutment of 2.0 and 2.5 mm respectively, were positioned and splinted by intraoral welding. One-piece titanium implants were used together with a pin (needle) titanium implant as supporting structure to achieve deep stabilization. The Scialom-like pin has a diameter of 1.2 mm and it is long enough to reach deep cortical bone that is “bicorticalism”. The One-piece implant is tightly connected to the needle implant by means of Mondani intra-oral welding technique. In severely atrophic anterior maxilla, the use of this method allows the immediate loading of a fixed resin prosthesis soon after surgery. These implants yielded satisfactory functional and aesthetic outcome in bone-deficient upper anterior sectors, without invasive regenerative procedures. The low invasiveness of this approach also consents rapid healing, reduced biological burden and greater patient benefit.

The intraoral welder was invented by Dr. Pierluigi Mondani during the early 70’s to weld titanium needle implants to a titanium bar in patient’s mouth and to load them immediately by means of resin prosthesis. The clinical use documented dates back to 1972. Over the years, many practical applications have been added to the initial one, which have expanded the use of this device. In this scientific work, main applications are described. The aim of the work was to trace the historical process of intra-oral welding according to Mondani and describe the main practical applications. Intra-oral welding is a process introduced by dr. Pier Luigi Mondani of Genova (Italy) which allows to firmly conjoin titanium implants of any shape by means of a titanium bar or also directly between them in the mouth during surgery. The immediate stabilization achieved by intraoral welding increases implants success rate, allows immediate loading even in situations of bone atrophy, saves implants that are running into failure, re-evaluates fractured implants, allows to stabilize submerged implants postponing prosthesis management, allows to achieve efficient rehabilitation protocols to deal with difficult cases. The 40-years’ experience with intra-oral welding described in this article, confirms the ease of use and efficiency in providing immediate stabilization of titanium implants of all types.

Purpose: To assess the changes in bacterial profile along the transmucosal path of healing screws placed immediately after insertion of two-piece endosseus implants during the 4-month osseointegration phase, in absence of functional load., Materials and Methods: Two site-specific samples were collected at the peri-implant mucosa of the healing screws of 80 two-piece implants, for a total of 640 samples. Implants placement was performed following a single protocol with flapless technique, in order to limit bacterial contamination of the surgical site. Identical healing screws (5 mm diameter/4 mm height) were used for each of the 80 implants. During the 4 months of the study, the patients followed a standard oral care regimen with no special hygiene maneuvers at the collection sites., Results: The present research documents that during the 4-month period prior to application of function load the bacterial profile of all sites exhibited a clear prevalence of cocci at the interface between implant neck and osteoalveolar crest margin., Conclusions: A potentially pathogenic bacterial flora developed only along the peri-implant transmucosal path.

The aim of this study is to compare the evolution in bacterial profile at evident periodontitis sites following two types of treatment - oral hygiene procedures alone (Group 1) and oral hygiene plus occlusal adjustment through selective grinding (Group 2). The presence of periodontal disease was ascertained by clinical examination (redness, oedema, probe depth, bleeding-on-probing). Bacterial profiling was carried out via phase contrast microscopy on plaque samples taken from periodontitis sites in both patient groups. Bacterial populations were characterized in terms of coccus content before (T0) and at monthly intervals after treatment (T1-6) over a period of six months. Static and dynamic occlusion was evaluated only in Group 2 patients. Whereas the poor pre-treatment bacterial profile was re-established progressively over the evaluation period in Group 1 patients, coccus populations flourished in Group 2 patients, reaching healthy levels (>70%) two months after occlusal adjustment, and clinical examination confirmed an absence of periodontal inflammation in these patients. Occlusal adjustment can lead to a marked, stable improvement in periodontal health in terms of bacterial profile and clinical appearance, presumably by obviating tissue distress caused by occlusal dysfunction, thereby providing unfavourable conditions for bacterial growth. Bacterial profiling is an effective indicator of periodontal health.