Search

This paper presents a new system model to evaluate the capacity and power consumption of multi-layer 6G networks utilising the upper mid-band (FR3). The model captures heterogeneous 4G, 5G, and 6G deployments, analyzing their performance under different deployment strategies. Our results show that strategic 6G deployments, non-co-located with existing 5G sites, significantly enhance throughput, with median and peak user rates of 300 Mbps and exceeding 1 Gbps, respectively. We also emphasize the importance of priority-based cell reselection and beam configuration to fully leverage 6G capabilities. While 6G implementation increases power consumption by 33%, non-colocated deployments strike a balance between performance and power consumption.

To address an ever-increasing demand for ubiquitous high-speed connectivity, mobile networks have intensified their deployment process. However, achieving this target has proven to be a challenge and has led to a surge in overall energy consumption. In recent years, non-terrestrial networks (NTNs) have been endorsed as a potential solution to these problems by complementing the coverage of the terrestrial network in areas with limited network deployment. To this end, this paper proposes an integrated terrestrial and non-terrestrial network (TN-NTN) that utilises the overall available communication resources to expand coverage and meet Quality of Service (QoS) requirements during high-traffic hours in any deployment scenario. Importantly, our framework allows to drastically reduce the terrestrial network energy consumption during low-traffic hours. Specifically, we introduce a novel radio resource management algorithm, BLASTER (Bandwidth SpLit, User ASsociation, and PowEr ContRol), which integrates bandwidth allocation, user equipment (UE) association, power control, and base station activation within the TN-NTN. This algorithm aims to optimize network resource allocation fairness and energy consumption dynamically, demonstrating new opportunities in deploying satellite networks in legacy cellular systems. Our study offers a comprehensive analysis of the integrated network model, emphasizing the effective balance between energy saving and QoS, and proposing practical solutions to meet the fluctuating traffic demands of cellular networks., Comment: Submitted to IEEE Transactions on Wireless Communications

In this article, we introduce a method to optimize 5G massive multiple-input multiple-output (mMIMO) connectivity for unmanned aerial vehicles (UAVs) on aerial highways through strategic cell association. UAVs operating in 3D space encounter distinct channel conditions compared to traditional ground user equipment (gUE); under the typical line of sight (LoS) condition, UAVs perceive strong reference signal received power (RSRP) from multiple cells within the network, resulting in a large set of suitable serving cell candidates and in low signal-to-interference-plus-noise ratio (SINR) due to high interference levels. Additionally, a downside of aerial highways is to pack possibly many UAVs along a small portion of space which, when taking into account typical LoS propagation conditions, results in high channel correlation and severely limits spatial multiplexing capabilities. In this paper, we propose a solution to both problems based on the suitable selection of serving cells based on a new metric which differs from the classical terrestrial approaches based on maximum RSRP. We then introduce an algorithm for optimal planning of synchronization signal block (SSB) beams for this set of cells, ensuring maximum coverage and effective management of UAVs cell associations. Simulation results demonstrate that our approach significantly improves the rates of UAVs on aerial highways, up to four times in achievable data rates, without impacting ground user performance.

Optimizing the design, performance, and resource efficiency of wireless networks (WNs) necessitates the ability to discern Line of Sight (LoS) and Non-Line of Sight (NLoS) scenarios across diverse applications and environments. Unmanned Aerial Vehicles (UAVs) exhibit significant potential in this regard due to their rapid mobility, aerial capabilities, and payload characteristics. Particularly, UAVs can serve as vital non-terrestrial base stations (NTBS) in the event of terrestrial base station (TBS) failures or downtime. In this paper, we propose CNN autoencoder resizer (CAR) as a framework that improves the accuracy of LoS/NLoS detection without demanding extra power consumption. Our proposed method increases the mean accuracy of detecting LoS/NLoS signals from 66% to 86%, while maintaining consistent power consumption levels. In addition, the resolution provided by CAR shows that it can be employed as a preprocessing tool in other methods to enhance the quality of signals.

Due to an ever-expansive network deployment, numerous questions are being raised regarding the energy consumption of the mobile network. Recently, Non-Terrestrial Networks (NTNs) have proven to be a useful, and complementary solution to Terrestrial Networks (TN) to provide ubiquitous coverage. In this paper, we consider an integrated TN-NTN, and study how to maximize its resource usage in a dynamic traffic scenario. We introduce BLASTER, a framework designed to control User Equipment (UE) association, Base Station (BS) transmit power and activation, and bandwidth allocation between the terrestrial and non-terrestrial tiers. Our proposal is able to adapt to fluctuating daily traffic, focusing on reducing power consumption throughout the network during low traffic and distributing the load otherwise. Simulation results show an average daily decrease of total power consumption by 45% compared to a network model following 3GPP recommendation, as well as an average throughput increase of roughly 250%. Our paper underlines the central and dynamic role that the NTN plays in improving key areas of concern for network flexibility., Comment: To be published in IEEE International Symposium on Personal, Indoor and Mobile Radio Communications 2024

Millimeter-wave (mmWave) networks, integral to 5G communication, offer a vast spectrum that addresses the issue of spectrum scarcity and enhances peak rate and capacity. However, their dense deployment, necessary to counteract propagation losses, leads to high power consumption. An effective strategy to reduce this energy consumption in mobile networks is the sleep mode optimization (SMO) of base stations (BSs). In this paper, we propose a novel SMO approach for mmWave BSs in a 3D urban environment. This approach, which incorporates a neural network (NN) based contextual multi-armed bandit (C-MAB) with an epsilon decay algorithm, accommodates the dynamic and diverse traffic of user equipment (UE) by clustering the UEs in their respective tracking areas (TAs). Our strategy includes beamforming, which helps reduce energy consumption from the UE side, while SMO minimizes energy use from the BS perspective. We extended our investigation to include Random, Epsilon Greedy, Upper Confidence Bound (UCB), and Load Based sleep mode (SM) strategies. We compared the performance of our proposed C-MAB based SM algorithm with those of All On and other alternative approaches. Simulation results show that our proposed method outperforms all other SM strategies in terms of the $10^{th}$ percentile of user rate and average throughput while demonstrating comparable average throughput to the All On approach. Importantly, it outperforms all approaches in terms of energy efficiency (EE).

The energy consumption of mobile networks poses a critical challenge. Mitigating this concern necessitates the deployment and optimization of network energy-saving solutions, such as carrier shutdown, to dynamically manage network resources. Traditional optimization approaches encounter complexity due to factors like the large number of cells, stochastic traffic, channel variations, and intricate trade-offs. This paper introduces the simulated reality of communication networks (SRCON) framework, a novel, data-driven modeling paradigm that harnesses live network data and employs a blend of machine learning (ML)- and expert-based models. These mix of models accurately characterizes the functioning of network components, and predicts network energy efficiency and user equipment (UE) quality of service for any energy carrier shutdown configuration in a specific network. Distinguishing itself from existing methods, SRCON eliminates the reliance on expensive expert knowledge, drive testing, or incomplete maps for predicting network performance. This paper details the pipeline employed by SRCON to decompose the large network energy efficiency modeling problem into ML and expert-based submodels. It demonstrates how, by embracing stochasticity, and carefully crafting the relationship between such submodels, the overall computational complexity can be reduced and prediction accuracy enhanced. Results derived from real network data underscore the paradigm shift introduced by SRCON, showcasing significant gains over a state-of-the art method used by a operator for network energy efficiency modeling. The reliability of this local, data-driven modeling of the network proves to be a key asset for network energy-saving optimization., Comment: 24 pages, 13 figures, submitted to IEEE Transactions on Machine Learning in Communications and Networking

Robust machine learning (ML) models can be developed by leveraging large volumes of data and distributing the computational tasks across numerous devices or servers. Federated learning (FL) is a technique in the realm of ML that facilitates this goal by utilizing cloud infrastructure to enable collaborative model training among a network of decentralized devices. Beyond distributing the computational load, FL targets the resolution of privacy issues and the reduction of communication costs simultaneously. To protect user privacy, FL requires users to send model updates rather than transmitting large quantities of raw and potentially confidential data. Specifically, individuals train ML models locally using their own data and then upload the results in the form of weights and gradients to the cloud for aggregation into the global model. This strategy is also advantageous in environments with limited bandwidth or high communication costs, as it prevents the transmission of large data volumes. With the increasing volume of data and rising privacy concerns, alongside the emergence of large-scale ML models like Large Language Models (LLMs), FL presents itself as a timely and relevant solution. It is therefore essential to review current FL algorithms to guide future research that meets the rapidly evolving ML demands. This survey provides a comprehensive analysis and comparison of the most recent FL algorithms, evaluating them on various fronts including mathematical frameworks, privacy protection, resource allocation, and applications. Beyond summarizing existing FL methods, this survey identifies potential gaps, open areas, and future challenges based on the performance reports and algorithms used in recent studies. This survey enables researchers to readily identify existing limitations in the FL field for further exploration.

In past years, non-terrestrial networks (NTNs) have emerged as a viable solution for providing ubiquitous connectivity for future wireless networks due to their ability to reach large geographical areas. However, the efficient integration and operation of an NTN with a classic terrestrial network (TN) is challenging due the large amount of parameters to tune. In this paper, we consider the downlink scenario of an integrated TN-NTN transmitting over the S band, comprised of low-earth orbit (LEO) satellites overlapping a large-scale ground cellular network. We propose a new resource management framework to optimize the user equipment (UE) performance by properly controlling the spectrum allocation, the UE association and the transmit power of ground base stations (BSs) and satellites. Our study reveals that, in rural scenarios, NTNs, combined with the proposed radio resource management framework, reduce the number of UEs that are out of coverage, highlighting the important role of NTNs in providing ubiquitous connectivity, and greatly improve the overall capacity of the network. Specifically, our solution leads to more than 200% gain in terms of mean data rate with respect to a network without satellites and a standard integrated TN-NTN when the resource allocation setting follows 3GPP recommendation., Comment: To be published in IEEE International Conference on Communications Workshops 2023

As traditional cellular base stations (BSs) are optimized for 2D ground service, providing 3D connectivity to uncrewed aerial vehicles (UAVs) requires re-engineering of the existing infrastructure. In this paper, we propose a new methodology for designing cellular networks that cater for both ground users and UAV corridors based on Bayesian optimization. We present a case study in which we maximize the signal-to-interference-plus-noise ratio (SINR) for both populations of users by optimizing the electrical antenna tilts and the transmit power employed at each BS. Our proposed optimized network significantly boosts the UAV performance, with a 23.4dB gain in mean SINR compared to an all-downtilt, full-power baseline. At the same time, this optimal tradeoff nearly preserves the performance on the ground, even attaining a gain of 1.3dB in mean SINR with respect to said baseline. Thanks to its ability to optimize black-box stochastic functions, the proposed framework is amenable to maximize any desired function of the SINR or even the capacity per area., Comment: to be published in IEEE Global Communications Conference (GLOBECOM) 2023

In this article, we advocate for the design of ad hoc artificial intelligence (AI)/machine learning (ML) models to facilitate their usage in future smart infrastructures based on communication networks. To motivate this, we first review key operations identified by the 3GPP for transferring AI/ML models through 5G networks and the main existing techniques to reduce their communication overheads. We also present a novel communication-aware ML framework, which we refer to as Accordion, that enables an efficient AI/ML model transfer thanks to an overhauled model training and communication protocol. We demonstrate the communication-related benefits of Accordion, analyse key performance trade-offs, and discuss potential research directions within this realm.

The inclusion of the sensing functionality in the coming generations of cellular networks necessitates a rethink of dense cell deployments. In this paper, we analyze and optimize dense cell topologies for dual-functional radar-communication (DFRC) cellular networks. With the aid of tools from stochastic geometry, we derive new analytical expressions of the potential area spectral efficiencies in (bit/sec/m2) of radar and communication systems. Based on the new formulations of the potential area spectral efficiencies, the energy efficiency (bit/Joule) of DFRC systems is provided in a closed-form formula. Then, an optimization problem to obtain the optimal base station (BS) density that maximizes the network-level energy efficiency is formulated and investigated. In this regard, the mathematical expression of the energy efficiency is shown to be a uni-modal and pseudo-concave function in the density of the BSs. Therefore, the optimal density of the BSs that maximizes the energy efficiency can be obtained. Our analytical and numerical results demonstrate that the inclusion of the sensing functionality clearly differentiates the optimal BS topologies for the DFRC systems against classical communication-only systems., Comment: 30 pages

The fifth generation of the Radio Access Network (RAN) has brought new services, technologies, and paradigms with the corresponding societal benefits. However, the energy consumption of 5G networks is today a concern. In recent years, the design of new methods for decreasing the RAN power consumption has attracted interest from both the research community and standardization bodies, and many energy savings solutions have been proposed. However, there is still a need to understand the power consumption behavior of state-ofthe-art base station architectures, such as multi-carrier active antenna units (AAUs), as well as the impact of different network parameters. In this paper, we present a power consumption model for 5G AAUs based on artificial neural networks. We demonstrate that this model achieves good estimation performance, and it is able to capture the benefits of energy saving when dealing with the complexity of multi-carrier base stations architectures. Importantly, multiple experiments are carried out to show the advantage of designing a general model able to capture the power consumption behaviors of different types of AAUs. Finally, we provide an analysis of the model scalability and the training data requirements.

The energy consumption of the fifth generation(5G) of mobile networks is one of the major concerns of the telecom industry. However, there is not currently an accurate and tractable approach to evaluate 5G base stations (BSs) power consumption. In this article, we propose a novel model for a realistic characterisation of the power consumption of 5G multi-carrier BSs, which builds on a large data collection campaign. At first, we define a machine learning architecture that allows modelling multiple 5G BS products. Then, we exploit the knowledge gathered by this framework to derive a realistic and analytically tractable power consumption model, which can help driving both theoretical analyses as well as feature standardisation, development and optimisation frameworks. Notably, we demonstrate that such model has high precision, and it is able of capturing the benefits of energy saving mechanisms. We believe this analytical model represents a fundamental tool for understanding 5G BSs power consumption, and accurately optimising the network energy efficiency., Comment: Accepted by IEEE Communications Magazine

With growing interest in integrating terrestrial networks (TNs) and non-terrestrial networks (NTNs) to connect the unconnected, a key question is whether this new paradigm could also be opportunistically exploited to augment service in urban areas. We assess this possibility in the context of an integrated TN-NTN, comprising a ground cellular deployment paired with a Low Earth Orbit (LEO) satellite constellation, providing sub-6 GHz connectivity to an urban area populated by ground users (GUEs) and uncrewed aerial vehicles (UAVs). Our study reveals that offloading UAV traffic to the NTN segment drastically reduces the downlink outage of UAVs from 70% to nearly zero, also boosting their uplink signal quality as long as the LEO satellite constellation is sufficiently dense to guarantee a minimum elevation angle. Offloading UAVs to the NTN also benefits coexisting GUEs, preventing uplink outages of around 12% that GUEs would otherwise incur. Despite the limited bandwidth available below 6 GHz, NTN-offloaded UAVs meet command and control rate requirements even across an area the size of Barcelona with as many as one active UAV per cell. Smaller UAV populations yield proportionally higher rates, potentially enabling aerial broadband applications.

Integrating terrestrial and non-terrestrial networks has the potential of connecting the unconnected and enhancing the user experience for the already-connected, with technological and societal implications of the greatest long-term significance. A convergence of ground, air, and space wireless communications also represents a formidable endeavor for the mobile and satellite communications industries alike, as it entails defining and intelligently orchestrating a new 3D wireless network architecture. In this article, we present the key opportunities and challenges arising from this (r)evolution by presenting some of its disruptive use-cases and key building blocks, reviewing the relevant standardization activities, and pointing to open research problems. By considering two multi-operator paradigms, we also showcase how terrestrial networks could be efficiently re-engineered to cater for aerial services, or opportunistically complemented by non-terrestrial infrastructure to augment their current capabilities.

Cellular networks have changed the world we are living in, and the fifth generation (5G) of radio technology is expected to further revolutionise our everyday lives, by enabling a high degree of automation, through its larger capacity, massive connectivity, and ultra-reliable low-latency communications. In addition, the third generation partnership project (3GPP) new radio (NR) specification also provides tools to significantly decrease the energy consumption and the green house emissions of next generations networks, thus contributing towards information and communication technology (ICT) sustainability targets. In this survey paper, we thoroughly review the state-of-the-art on current energy efficiency research. We first categorise and carefully analyse the different power consumption models and energy efficiency metrics, which have helped to make progress on the understanding of green networks. Then, as a main contribution, we survey in detail -- from a theoretical and a practical viewpoint -- the main energy efficiency enabling technologies that 3GPP NR provides, together with their main benefits and challenges. Special attention is paid to four key enabling technologies, i.e., massive multiple-input multiple-output (MIMO), lean carrier design, and advanced idle modes, together with the role of artificial intelligence capabilities. We dive into their implementation and operational details, and thoroughly discuss their optimal operation points and theoretical-trade-offs from an energy consumption perspective. This will help the reader to grasp the fundamentals of -- and the status on -- green networking. Finally, the areas of research where more effort is needed to make future networks greener are also discussed.

As hordes of data-hungry devices challenge its current capabilities, Wi-Fi strikes back with 802.11be, alias Wi-Fi 7. This brand-new amendment promises a (r)evolution of unlicensed wireless connectivity as we know it. With its standardisation process being consolidated, we provide an updated digest of 802.11be essential features, vouching for multi-AP coordination as a must-have for critical and latency-sensitive applications. We then get down to the nitty-gritty of one of its most enticing implementations-coordinated beamforming-, for which our standard-compliant simulations confirm near-tenfold reductions in worst-case delays., Comment: 7 pages

Motivated by the promising benefits of dynamic Time Division Duplex (TDD), in this paper, we use a unified framework to investigate both the technical issues of applying dynamic TDD in homogeneous small cell networks (HomSCNs), and the feasibility of introducing dynamic TDD into heterogeneous networks (HetNets). First, HomSCNs are analyzed, and a small cell BS scheduler that dynamically and independently schedules DL and UL subframes is presented, such that load balancing between the DL and the UL traffic can be achieved. Moreover, the effectiveness of various inter-link interference mitigation (ILIM) schemes as well as their combinations, is systematically investigated and compared. Besides, the interesting possibility of partial interference cancellation (IC) is also explored. Second,based on the proposed schemes, the joint operation of dynamic TDD together with cell range expansion (CRE) and almost blank subframe (ABS) in HetNets is studied. In this regard, scheduling polices in small cells and an algorithm to derive the appropriate macrocell traffic off-load and ABS duty cycle under dynamic TDD operation are proposed. Moreover, the full IC and the partial IC schemes are investigated for dynamic TDD in HetNets. The user equipment (UE) packet throughput performance of the proposed/discussed schemes is benchmarked using system-level simulations., Comment: TVT

Indoor areas, such as offices and shopping malls, are a natural environment for initial millimeter-wave (mmWave) deployments. While we already have the technology that enables us to realize indoor mmWave deployments, there are many remaining challenges associated with system-level design and planning for such. The objective of this article is to bring together multiple strands of research to provide a comprehensive and integrated framework for the design and performance evaluation of indoor mmWave systems. The paper introduces the framework with a status update on mmWave technology, including ongoing fifth generation (5G) wireless standardization efforts, and then moves on to experimentally-validated channel models that inform performance evaluation and deployment planning. Together these yield insights on indoor mmWave deployment strategies and system configurations, from feasible deployment densities to beam management strategies and necessary capacity extensions., Comment: Proceedings of the IEEE

In this paper, we perform a survey on new Third Generation Partnership Project (3GPP) Long Term Evolution-Advanced (LTE-Advanced) enhancements,covering the technologies recently adopted by the 3GPP in LTE Release 11 and those being discussed in LTE Release 12. In more details, we introduce the latest enhancements on carrier aggregation (CA), multiple-input multiple-output (MIMO) and coordinated multi-point (CoMP) as well as three-dimensional (3D) MIMO. Moreover, considering that network nodes will become very diverse in the future, and thus with heterogeneous network (HetNet) being a key feature of LTE-Advanced networks, we also discuss technologies of interest in HetNet scenarios, e.g., enhanced physical data control channel (ePDCCH), further enhanced inter-cell interference coordination (FeICIC) and small cells, together with energy efficiency concerns. In particular, we pay special attention to one of the most important enhancements in LTE Release 12, i.e., dynamic time division duplex (TDD) transmissions, and present performance results that shed new light on this topic., Comment: WCM

Recent years have seen rapid deployment of mobile computing and Internet of Things (IoT) networks, which can be mostly attributed to the increasing communication and sensing capabilities of wireless systems. Big data analysis, pervasive computing, and eventually artificial intelligence (AI) are envisaged to be deployed on top of the IoT and create a new world featured by data-driven AI. In this context, a novel paradigm of merging AI and wireless communications, called Wireless AI that pushes AI frontiers to the network edge, is widely regarded as a key enabler for future intelligent network evolution. To this end, we present a comprehensive survey of the latest studies in wireless AI from the data-driven perspective. Specifically, we first propose a novel Wireless AI architecture that covers five key data-driven AI themes in wireless networks, including Sensing AI, Network Device AI, Access AI, User Device AI and Data-provenance AI. Then, for each data-driven AI theme, we present an overview on the use of AI approaches to solve the emerging data-related problems and show how AI can empower wireless network functionalities. Particularly, compared to the other related survey papers, we provide an in-depth discussion on the Wireless AI applications in various data-driven domains wherein AI proves extremely useful for wireless network design and optimization. Finally, research challenges and future visions are also discussed to spur further research in this promising area., Comment: Accepted at the IEEE Communications Surveys & Tutorials, 42 pages

Wi-Fi technology is continuously innovating to cater to the growing customer demands, driven by the digitalisation of everything, both in the home as well as the enterprise and hotspot spaces. In this article, we introduce to the wireless community the next generation Wi-Fi$-$based on IEEE 802.11be Extremely High Throughput (EHT)$-$, present the main objectives and timelines of this new 802.11be amendment, thoroughly describe its main candidate features and enhancements, and cover the important issue of coexistence with other wireless technologies. We also provide simulation results to assess the potential throughput gains brought by 802.11be with respect to 802.11ax., Comment: 6 pages, 4 figures

This article provides dives into the fundamentals of dense and ultra-dense small cell wireless networks, discussing the reasons why dense and ultra-dense small cell networks are fundamentally different from sparse ones, and why the well-known linear scaling law of capacity with the base station (BS) density in the latter does not apply to the former. In more detail, we review the impact of the following factors on ultradense networks (UDNs), (i) closed-access operations and line-of-sight conditions, (ii) the near-field effect, (iii) the antenna height difference between small cell BSs and user equipments (UEs), and (iv) the surplus of idle-mode-enabled small cell BSs with respect to UEs. Combining all these network characteristics and features, we present a more realistic capacity scaling law for UDNs, which indicates (i) the existence of an optimum BS density to maximise the area spectral efficiency (ASE) for a given finite UE density, and (ii) the existence of an optimum density of UEs that can be simultaneously scheduled across the network to maximise the ASE for a given finite BS density.

In this paper, we focus on one of the key technologies for the fifth-generation wireless communication networks, massive multiple-input-multiple-output (mMIMO), by investigating two of its most relevant architectures: 1) to provide in-band backhaul for the ultra-dense network (UDN) of self-backhauled small cells (SCs), and 2) to provide direct access (DA) to user equipments (UEs). Through comprehensive 3GPP-based system-level simulations and analytical formulations, we show the end-to-end UE rates achievable with these two architectures. Differently from the existing works, we provide results for two strategies of self-backhauled SC deployments, namely random and ad-hoc, where in the latter SCs are purposely positioned close to UEs to achieve line-of-sight (LoS) access links. We also evaluate the optimal backhaul and access time resource partition due to the in-band self-backhauling (s-BH) operations. Our results show that the ad-hoc deployment of self-backhauled SCs closer to the UEs with optimal resource partition and with directive antenna patterns, provides rate improvements for cell-edge UEs that amount to 30% and tenfold gain, as compared to mMIMO DA architecture with pilot reuse 3 and reuse 1, respectively. On the other hand, mMIMO s-BH underperforms mMIMO DA above the median value of the UE rates when the effect of pilot contamination is less severe, and the LoS probability of the DA links improves., Comment: The paper is published at IEEE Transactions on Vehicular Technology (TVT 2019). arXiv admin note: text overlap with arXiv:1806.10969

Uplink power control is an efficient scheme to mitigate pilot contamination in massive multiple-input multiple-output (MIMO) systems. In this work, we provide a comprehensive study on the effects of fractional power control (FPC) on the downlink performance of the most relevant fifth generation (5G) massive MIMO deployments. Specifically, we perform thorough system simulations based on the most recent three dimensional spatial channel model released by the 3rd Generation Partnership Project to evaluate the impact of different deployment-related parameters such as pilot reuse factor, beamforming criterion, and base station array size. Our results indicate the most suitable tuning of the FPC parameters and show that optimized FPC provides huge gains in the cell border throughput when compared to a baseline scheme with all the users transmitting at maximum power. Moreover, our simulations also demonstrate that the effectiveness of FPC grows in scenarios with severe pilot contamination, confirming that implementing this feature is essential in realistic deployments., Comment: Accepted at the IEEE GLOBECOM Workshop on Emerging Technologies for 5G and Beyond Wireless and Mobile Networks, Abu Dhabi (UAE), Dec. 2018

A key aspect of the fifth-generation wireless communication network will be the integration of different services and technologies to provide seamless connectivity. In this paper, we consider using massive multiple-input multiple-output (mMIMO) to provide backhaul links to a dense deployment of self-backhauling (s-BH) small cells (SCs) that provide cellular access within the same spectrum resources of the backhaul. Through a comprehensive system-level simulation study, we evaluate the interplay between access and backhaul and the resulting end-to-end user rates. Moreover, we analyze the impact of different SCs deployment strategies, while varying the time resource allocation between radio access and backhaul links. We finally compare the above mMIMO-based s-BH approach to a mMIMO direct access (DA) architecture accounting for the effects of pilot reuse schemes, together with their associated overhead and contamination mitigation effects. The results show that dense SCs deployments supported by mMIMO s-BH provide significant rate improvements for cell-edge users (UEs) in ultra-dense deployments with respect to mMIMO DA, while the latter outperforms mMIMO s-BH from the median UEs' standpoint.

What will it take for drones -- and the whole associated ecosystem -- to take off? Arguably, infallible command and control (C&C) channels for safe and autonomous flying, and high-throughput links for multi-purpose live video streaming. And indeed, meeting these aspirations may entail a full cellular support, provided through 5G-and-beyond hardware and software upgrades by both mobile operators and manufacturers of these unmanned aerial vehicles (UAVs). In this article, we vouch for massive MIMO as the key building block to realize 5G-connected UAVs. Through the sheer evidence of 3GPP-compliant simulations, we demonstrate how massive MIMO can be enhanced by complementary network-based and UAV-based solutions, resulting in consistent UAV C&C support, large UAV uplink data rates, and harmonious coexistence with legacy ground users.

The purpose of this article is to bestow the reader with a timely study of UAV cellular communications, bridging the gap between the 3GPP standardization status quo and the more forward-looking research. Special emphasis is placed on the downlink command and control (C&C) channel to aerial users, whose reliability is deemed of paramount technological importance for the commercial success of UAV cellular communications. Through a realistic side-by-side comparison of two network deployments -- a present-day cellular infrastructure versus a next-generation massive MIMO system -- a plurality of key facts are cast light upon, with the three main ones summarized as follows: (i) UAV cell selection is essentially driven by the secondary lobes of a base station's radiation pattern, causing UAVs to associate to far-flung cells; (ii) over a 10 MHz bandwidth, and for UAV heights of up to 300 m, massive MIMO networks can support 100 kbps C&C channels in 74% of the cases when the uplink pilots for channel estimation are reused among base station sites, and in 96% of the cases without pilot reuse across the network; (iii) supporting UAV C&C channels can considerably affect the performance of ground users on account of severe pilot contamination, unless suitable power control policies are in place., Comment: arXiv admin note: text overlap with arXiv:1802.01527

In this article, we provide a much-needed study of UAV cellular communications, focusing on the rates achievable for the UAV downlink command and control (C&C) channel. For this key performance indicator, we perform a realistic comparison between existing deployments operating in single-user mode and next-generation multi-user massive MIMO systems. We find that in single-user deployments under heavy data traffic, UAVs flying at 50 m, 150 m, and 300 m achieve the C&C target rate of 100 kbps -- as set by the 3GPP -- in a mere 35%, 2%, and 1% of the cases, respectively. Owing to mitigated interference, a stronger carrier signal, and a spatial multiplexing gain, massive MIMO time division duplex systems can dramatically increase such probability. Indeed, we show that for UAV heights up to 300 m the target rate is met with massive MIMO in 74% and 96% of the cases with and without uplink pilot reuse for channel state information (CSI) acquisition, respectively. On the other hand, the presence of UAVs can significantly degrade the performance of ground users, whose pilot signals are vulnerable to UAV-generated contamination and require protection through uplink power control.

To guarantee the success of massive multiple-input multiple-output (MIMO), one of the main challenges to solve is the efficient management of pilot contamination. Allocation of fully orthogonal pilot sequences across the network would provide a solution to the problem, but the associated overhead would make this approach infeasible in practical systems. Ongoing fifth-generation (5G) standardisation activities are debating the amount of resources to be dedicated to the transmission of pilot sequences, focussing on uplink sounding reference signals (UL SRSs) design. In this paper, we extensively evaluate the performance of various UL SRS allocation strategies in practical deployments, shedding light on their strengths and weaknesses. Furthermore, we introduce a novel UL SRS fractional reuse (FR) scheme, denoted neighbour-aware FR (FR-NA). The proposed FR-NA generalizes the fixed reuse paradigm, and entails a tradeoff between i) aggressively sharing some UL SRS resources, and ii) protecting other UL SRS resources with the aim of relieving neighbouring BSs from pilot contamination. Said features result in a cell throughput improvement over both fixed reuse and state-of-the-art FR based on a cell-centric perspective.

In order to cope with the forecasted 1000x increase in wireless capacity demands by 2030, network operators will aggressively densify their network infrastructure to reuse the spectrum as much as possible. However, it is important to realise that these new ultra-dense small cell networks are fundamentally different from the traditional macrocell or sparse small cell networks, and thus ultra-dense networks (UDNs) cannot be deployed and operated in the same way as in the last 25 years. In this paper, we systematically investigate and visualise the performance impacts of several fundamental characteristics of UDNs, that mobile operators and vendors should consider when deploying UDNs. Moreover, we also provide new deployment and management guidelines to address the main challenges brought by UDNs in the future., Comment: To appear in IEEE Network Magazine. 1536-1276 copyright 2015 IEEE. Personal use is permitted, but republication/redistribution requires IEEE permission. Please find the final version in IEEE from the link: http://ieeexplore.ieee.org/document/xxxxxxx/. Digital Object Identifier: 10.1109/TNM.2017.xxxxxxx

Providing consistently high wireless capacity is becoming increasingly important to support the applications required by future digital enterprises. In this paper, we propose Eigen-direction-aware ZF (EDA-ZF) with partial coordination among base stations (BSs) and distributed interference suppression as a practical approach to achieve this objective. We compare our solution with Zero Forcing (ZF), entailing neither BS coordination or inter-cell interference mitigation, and Network MIMO (NeMIMO), where full BS coordination enables centralized inter-cell interference management. We also evaluate the performance of said schemes for three sub-6 GHz deployments with varying BS densities -- sparse, intermediate, and dense -- all with fixed total number of antennas and radiated power. Extensive simulations show that: (i) indoor massive MIMO implementing the proposed EDA-ZF provides uniformly good rates for all users; (ii) indoor network densification is detrimental unless full coordination is implemented; (iii) deploying NeMIMO pays off under strong outdoor interference, especially for cell-edge users.

This paper analyses the performance benefits of a user-centric scheduling approach, exploiting the flexibility of both dynamic time division duplex (TDD) and a variable transmission time interval (TTI), where the downlink to uplink ratio and TTI duration can be adapted to the traffic load. The formulation of the joint optimisation problem takes into consideration the individual requirements of each single user in terms of sustainable latency and desired throughput, thus implementing a real user-centric scheduling approach. Moreover, the developed solution is evaluated in a scenario with mixed traffic types, mobile broadband (MBB) and mission critical communications (MCC), showing remarkable performance enhancement of the proposed scheme over baseline dynamic TDD schemes with a fixed TTI in terms of both achievable throughput of the MBB users and guaranteed latency for the MCC users., Comment: 7 pages, 9 figures, GLOBECOM 2016 ET5G Workshop

We propose massive MIMO unlicensed (mMIMO-U) as a high-capacity solution for future indoor wireless networks operating in the unlicensed spectrum. Building upon massive MIMO (mMIMO), mMIMO-U incorporates additional key features, such as the capability of placing accurate radiation nulls towards coexisting nodes during the channel access and data transmission phases. We demonstrate the spectrum reuse and data rate improvements attained by mMIMO-U by comparing three practical deployments: single-antenna Wi-Fi, where an indoor operator deploys three single-antenna Wi-Fi access points (APs), and two other scenarios where the central AP is replaced by either a mMIMO AP or the proposed mMIMO-U AP. We show that upgrading the central AP with mMIMO-U provides increased channel access opportunities for all of them. Moreover, mMIMO-U achieves four-fold and seven-fold gains in median throughput when compared to traditional mMIMO and single-antenna setups, respectively., Comment: 6 pages, 5 figures

In this paper, we present a new and significant theoretical discovery. If the absolute height difference between base station (BS) antenna and user equipment (UE) antenna is larger than zero, then the network performance in terms of both the coverage probability and the area spectral efficiency (ASE) will continuously decrease toward zero as the BS density increases for ultra-dense (UD) small cell networks (SCNs). Such findings are completely different from the conclusions in existing works, both quantitatively and qualitatively. In particular, this performance behavior has a tremendous impact on the deployment of UD SCNs in the 5th-generation (5G) era. Network operators may invest large amounts of money in deploying more network infrastructure to only obtain an even less network capacity. Our study results reveal that one way to address this issue is to lower the SCN BS antenna height to the UE antenna height. However, this requires a revolutionized approach of BS architecture and deployment, which is explored in this paper too., Comment: To appear in IEEE TWC

This paper studies the impact of the base station (BS) idle mode capability (IMC) on the network performance of multi-tier and dense heterogeneous cellular networks (HCNs). Different from most existing works that investigated network scenarios with an infinite number of user equipments (UEs), we consider a more practical setup with a finite number of UEs in our analysis. More specifically, we derive the probability of which BS tier a typical UE should associate to and the expression of the activated BS density in each tier. Based on such results, analytical expressions for the coverage probability and the area spectral efficiency (ASE) in each tier are also obtained. The impact of the IMC on the performance of all BS tiers is shown to be significant. In particular, there will be a surplus of BSs when the BS density in each tier exceeds the UE density, and the overall coverage probability as well as the ASE continuously increase when the BS IMC is applied. Such finding is distinctively different from that in existing work. Thus, our result sheds new light on the design and deployment of the future 5G HCNs., Comment: conference submission

Nowadays, the demand for wireless mobile services is copious, and will continue increasing in the near future. Mobile cellular operators are therefore looking at the unlicensed spectrum as an economical supplement to augment the capacity of their soon-to-be overloaded networks. The same unlicensed bands are luring internet service providers, venue owners, and authorities into autonomously setting up and managing their high-performance private networks. In light of this exciting future, ensuring coexistence between multiple unlicensed technologies becomes a pivotal issue. So far this issue has been merely addressed via inefficient sharing schemes based on intermittent transmission. In this article, we present the fundamentals and the main challenges behind massive MIMO unlicensed, a brand-new approach for technology coexistence in the unlicensed bands, which is envisioned to boost spectrum reuse for a plethora of use cases., Comment: 6 pages, 6 figures

We consider cellular base stations (BSs) equipped with a large number of antennas and operating in the unlicensed band. We denote such system as massive MIMO unlicensed (mMIMO-U). We design the key procedures required to guarantee coexistence between a cellular BS and nearby Wi-Fi devices. These include: neighboring Wi-Fi channel covariance estimation, allocation of spatial degrees of freedom for interference suppression, and enhanced channel sensing and data transmission phases. We evaluate the performance of the so-designed mMIMO-U, showing that it allows simultaneous cellular and Wi-Fi transmissions by keeping their mutual interference below the regulatory threshold. The same is not true for conventional listen-before-talk (LBT) operations. As a result, mMIMO-U boosts the aggregate cellular-plus-Wi-Fi data rate in the unlicensed band with respect to conventional LBT, exhibiting increasing gains as the number of BS antennas grows., Comment: To appear in Proc. IEEE ICC 2017

In this paper, we conduct performance evaluation for Ultra-Dense Networks (UDNs), and identify which modelling factors play major roles and minor roles. From our study, we draw the following conclusions. First, there are 3 factors/models that have a major impact on the performance of UDNs, and they should be considered when performing theoretical analyses: i) a multi-piece path loss model with line-of-sight (LoS) and non-lineof- sight (NLoS) transmissions; ii) a non-zero antenna height difference between base stations (BSs) and user equipments (UEs); iii) a finite BS/UE density. Second, there are 4 factors/models that have a minor impact on the performance of UDNs, i.e., changing the results quantitatively but not qualitatively, and thus their incorporation into theoretical analyses is less urgent: i) a general multi-path fading model based on Rician fading; ii) a correlated shadow fading model; iii) a BS density dependent transmission power; iv) a deterministic BS/user density. Finally, there are 5 factors/models for future study: i) a BS vertical antenna pattern; ii) multi-antenna and/or multi-BS joint transmissions; iii) a proportional fair BS scheduler; iv) a non-uniform distribution of BSs; v) a dynamic time division duplex (TDD) or full duplex (FD) network. Our conclusions can guide researchers to downselect the assumptions in their theoretical analyses, so as to avoid unnecessarily complicated results, while still capturing the fundamentals of UDNs in a meaningful way., Comment: Final IEEE version: http://ieeexplore.ieee.org/document/7959926/. arXiv admin note: text overlap with arXiv:1609.07710

Coexistence with Wi-Fi is the key issue for unlicensed band LTE. The main coexistence mechanism is Listen-Before-Talk, whereby radio frequency energy is sensed over a short period of time and compared to a threshold. Given the default energy thresholds, the energy sensing range is actually much less than the cell range. Both technologies can experience collisions due to transmission being below energy detection threshold. Currently Wi-Fi is agnostic of LTE presence in the unlicensed spectrum. To improve coexistence a communications channel via relaying is proposed to be used by the unlicensed band LTE, to announce its presence on an unlicensed channel. Legacy Wi-Fi APs may be programmed to interpret and respond by firmware upgrade at the AP to enhance its channel selection algorithm. Higher performance for both networks is demonstrated via more effective radio frequency channel selection and adaptive energy detection thresholding., Comment: Submitted to IEEE Com Mag

We propose to operate massive multiple-input multiple output (MIMO) cellular base stations (BSs) in unlicensed bands. We denote such system as massive MIMO unlicensed (mMIMO-U). We design the key procedures required at a cellular BS to guarantee coexistence with nearby Wi-Fi devices operating in the same band. In particular, spatial reuse is enhanced by actively suppressing interference towards neighboring Wi-Fi devices. Wi-Fi interference rejection is also performed during an enhanced listen-before-talk (LBT) phase. These operations enable Wi-Fi devices to access the channel as though no cellular BSs were transmitting, and vice versa. Under concurrent Wi-Fi and BS transmissions, the downlink rates attainable by cellular user equipment (UEs) are degraded by the Wi-Fi-generated interference. To mitigate this effect, we select a suitable set of UEs to be served in the unlicensed band accounting for a measure of the Wi-Fi/UE proximity. Our results show that the so-designed mMIMO-U allows simultaneous cellular and Wi-Fi transmissions by keeping their mutual interference below the regulatory threshold. Compared to a system without interference suppression, Wi-Fi devices enjoy a median interference power reduction of between 3 dB with 16 antennas and 18 dB with 128 antennas. With mMIMO-U, cellular BSs can also achieve large data rates without significantly degrading the performance of Wi-Fi networks deployed within their coverage area.