Search

Despite the introduction of intraoral scanners (IOSs) with dual camera triangulation, only a few comparative clinical studies have evaluated their clinical performances in the digital workflow for cast-free restorations.The purpose of this clinical trial was to assess the clinical efficacy of 2 different technology-based IOSs by evaluating the marginal and internal gaps of cast-free monolithic zirconia crowns fabricated by using a fully digital workflow.A prospective randomized clinical trial was conducted in 35 participants requiring a single-unit restoration. One crown was fabricated from the scan data obtained with a confocal microscopy-based IOS (Group T), while the other was made with the scan data obtained from an IOS using dual camera triangulation (Group I). A replica technique was used to assess the marginal and internal gaps. The buccolingual and mesiodistal cross-sections were measured, and noninferiority trials were performed.A total of 39 teeth from 35 participants were restored with a single-unit crown. The marginal and axial wall gaps of the crowns in Group I was not inferior to that of the crowns in Group T (upper limit confidence interval [CI] 30). In contrast, the gap of the crowns at the line angle in Group T was inferior to that of the crowns in Group I (lower limit CI -30). From an occlusal space perspective, the gap of the crowns in Group I was inferior to that of the crowns in Group T (upper limit CI30). Twenty-five crowns were selected from Group I, and 14 crowns were selected from Group T for definitive placement.The marginal gap of the crown fabricated by using the scan data obtained from the dual camera triangulation-based IOS was noninferior to that obtained from the confocal microscopy-based IOS and was within the clinically applicable limit.

Statement of problem Studies evaluating the accuracy of edentulous arch impressions encompassing conventional and digital methods are lacking. Purpose The purpose of this in vitro study was to evaluate 8 impression-making methods for edentulous arches and to determine the effects of using a 3-dimensionally printed polyetheretherketone (PEEK) scanning aid on the accuracy of intraoral scanners. Material and methods Three sets of edentulous arch typodonts were scanned with an industrial scanner as a reference. Subsequently, a scanning aid for the edentulous arch was individually designed on each reference scan dataset by using a 3-dimensional modeling software program and fabricated in PEEK with a 3-dimensional printer. Each typodont was scanned with 2 intraoral scanners 12 times, with and without the assistance of a scanning aid for the edentulous arch. Impressions were made with 4 different conventional impression materials (irreversible hydrocolloid, polysulfide, polyether, and polyvinyl siloxane)—12 times for each typodont—the casts were poured and digitized with a tabletop scanner. Each scan data set was superimposed over the corresponding scan data set, and the original and absolute distance values from the paired surface points were obtained to measure the trueness and precision. These were expressed by using the mean, median, root mean square, and (90 percentile-10 percentile)/2 of the absolute distance value (NMT) concepts, based on the raw data extraction protocol. A repeated-measures ANOVA followed by a post hoc Bonferroni test was conducted (α=.05). Results The impression-making methods did not show statistically significant differences (P>.05) for either trueness or precision, particularly when the median values of the original and absolute distance values from the paired surface points were chosen as the standard values. One of the intraoral scanners used exhibited significantly superior outcomes to conventional impression materials when scanned with the scanning aid for the edentulous arch for both trueness and precision when the mean, root mean square, and NMT concepts were applied (P Conclusions Intraoral scanners demonstrated accuracy comparable with that of conventional impression materials for making edentulous arch impressions, regardless of the concepts used to express the trueness and precision. The PEEK-based scanning aid for the edentulous arch did not improve the accuracy of the intraoral scanners; however, its application resulted in higher accuracy compared with that of conventional impression materials.

This article describes a combined conventional and digital workflow for fabricating removable partial dentures (RPDs). After scanning the dental cast and RPD framework assembly, artificial teeth and denture base regions were designed using computer-aided design software. The artificial teeth and denture base assembly was milled as a single structure by using a wax disk and then placed on the RPD framework. The artificial teeth were additionally milled from a polymethyl methacrylate disk. Conventional procedures were followed for denture investment until the wax elimination procedure, after which the assembly was replaced with the artificial teeth in the cope of the flasks, and the denture resin material was injected to process the RPD. This technique enabled the RPD to be fabricated in the same form as the design state.

A digital workflow to assess the soft tissue dimensional changes in completely edentulous patients is described. Diagnostic casts obtained at 2 time points and the complete denture were scanned by using a desktop scanner. The denture scan was inverted by using a metrology software program to obtain the soft tissue contour. Using this reversed file as a reference, the file and 2 scan files obtained at different time points were aligned individually with the best fit alignment function. The scanned denture file and the 2 realigned scan files were imported into the same software. A plane vertical to the occlusal plane was determined such that it moved anteroposteriorly. The distance between the contours of the 2 realigned files was measured by selecting a point and a vector based on the artificial tooth positions of the denture. This technique of using a reversed denture file may provide a quantitative evaluation of soft tissue changes and further aid in determining appropriate intervals for denture relining or rebasing.

PURPOSE This study aimed to determine the most reliable scanning strategy and scanner type, using a new protocol for assessing the accuracy (trueness and precision) of intraoral scan data. MATERIALS AND METHODS Five different maxillary and mandibular typodont pairs (n = 10) and 2 intraoral scanners were used for the study. A reference scan for each arch was obtained with an industrial scanner. Scanning strategies were classified into 2 continuous methods-continuous scan in horizontal direction (CH group) and continuous scan with vertical rotation in anterior region (CV group)-and 1 segmental method (S group). In the CH group, the scanner head was maintained mostly in a horizontal position. In the CV group, the scanners were rotated 180° around the anterior tooth region to allow smooth scanning through the area. The intraoral scan data were individually superimposed over their corresponding reference scan data. Raw data of the distances between paired surface points were extracted from the superimposed pairs of datasets, with (original distance values) or without consideration (absolute distance values) of the value signs. Trueness values were calculated using absolute distance values, while precision values were obtained from original distance values. Data were analyzed with a 2-way repeated-measures analysis of variance using α = 0.05 as the level of significance. RESULTS The CV group produced significantly inferior outcomes compared to the CH and S groups in terms of trueness (p < 0.001, F = 24.67), whereas no significant differences were observed among the 3 scanning strategies with respect to precision (p = 0.451, F = 0.83). Scanner type did not produce significant differences in terms of either trueness (p = 0.058, F = 4.72) or precision (p = 0.742, F = 0.12). CONCLUSIONS The segmental approach for scanning the region of interest first and continuous scanning with the scanner head held mostly in a horizontal position are both acceptable as full-arch scanning strategies. However, vertical rotation of intraoral scanners should be minimized.

Clinical trials comparing outcomes associated with digital complete dentures (CDs) fabricated from intraoral scan data with those of CDs fabricated by using the conventional workflow are lacking.The purpose of this randomized clinical trial was to evaluate the clinical performance of and patient satisfaction associated with digitally versus conventionally fabricated CDs.Eight participants requiring CDs were enrolled in this study. Two sets of CDs were fabricated for each participant. One set was fabricated by using a digital workflow, which involved digital scanning with an intraoral scanner, whereas the other set was made by using the conventional workflow. The participants were given 1 set of CDs for 1 month and another set for the next month. The order of placing CDs was randomly selected for each participant. The internal adaptation, masticatory force, and masticatory efficiency of the CDs in each group were evaluated for objective analysis. Additionally, a questionnaire was provided to the participants, and the responses were evaluated for subjective satisfaction analysis. All parameters were analyzed by using t tests (α=.05).The internal adaptation did not statistically significantly differ between the conventional and digital CDs with regard to the maxillary arches (P=.406) and mandibular arches (P=.412). The average masticatory force (P=.051) and maximum masticatory force (P=.110) likewise did not statistically significantly differ between the 2 types of CDs. Masticatory efficiency, expressed via the mixing ability index, was statistically better for conventional CDs than the digital CDs (P=.009). No statistically significant differences were observed between the 2 types of CDs in terms of overall patient satisfaction as assessed by using the study questionnaire (P=.172 for maxillary CD and P=.161 for mandibular CD). However, the conventional CDs were statistically significantly better than the digital CDs with regard to subjective satisfaction with pronunciation ability (P=.006).The digital CDs were inferior to the conventional CDs in terms of masticatory efficiency and pronunciation. However, internal adaptation and overall patient satisfaction were comparable between conventional and digital CDs. This finding suggests that intraoral scanning and additively manufactured CDs may be suitable for edentulous patients, at least for interim use.

We evaluated and compared ultraviolet (UV) treatment and simvastatin (SIM) immersion effects on the osseointegration of sandblasted, large-grit, acid-etched (SLA) titanium dental implants at two different time points in rabbit tibias, with or without xenogenic bone graft materials. The surface alteration on simvastatin treatment titanium discs was analyzed using an infrared spectrometer. Implants were categorized into four groups according to the surface treatment type. Twelve rabbits received two implants per tibia. A tibial defect model was created using a trephine bur, with implants in contact with the bone surface and bovine bone graft materials for gap filling. The rabbits were sacrificed after 2 or 4 weeks. UV treatment or SIM immersion increased the bone-to-implant contact (BIC) on nongrafted sides, and both increased the BIC and bone area (BA) on grafted sides. The application of both treatments did not result in higher BIC or BA than a single treatment. At two different time points, BIC in the nongrafted sides did not differ significantly among the UV and/or SIM treated groups, whereas BA differed significantly. UV or SIM treatment of SLA titanium implants accelerates osseointegration in tibias with or without xenogenic bone graft materials. The combination of both treatments did not show synergy.

Background and Overview In this report, the authors describe a combined digital and conventional work flow that enabled placement of immediate dentures in 2 patient visits. Case Description Digital intraoral impressions and interarch relationship were obtained with an intraoral scanner during the first visit. The residual teeth from the digital intraoral impressions were removed, and a series of modules were used to design trial denture base and occlusal rim assemblies. The assemblies of both arches were fabricated with a 3-dimensional printer and resin material. Dental stone was poured into the intaglio of each assembly to fabricate dental casts. The assemblies and their corresponding dental casts were mounted on the articulator. The portion of the resin occlusal rim was removed, and the artificial teeth were arranged in an alternating manner; the immediate dentures were processed via conventional protocols. During the second visit, these immediate dentures were placed after extraction and relined with a denture relining material. Conclusions and Practical Implications Advances in digital technologies have enabled the establishment of treatment plans that would not have been considered previously. The combination of digital and conventional work flow in fabricating immediate dentures has eliminated the risk of experiencing unintentional tooth extraction during impression-making procedures, reduced the number of patient visits for the placement of immediate dentures, and resulted in satisfactory esthetic and functional outcomes.

This article describes a digital technique that combines intraoral digital scans with a 3-dimensional facial scan to predict the outcome of prosthodontic treatment of anterior teeth at the treatment planning phase. This approach may increase patient acceptance of the definitive treatment, as the altered facial appearance is visualized with definitive prosthodontic restorations, thereby improving communication before treatment begins.

In this study, we evaluated the effects of ultraviolet (UV) treatment and alendronate (ALN) immersion on the proliferation and differentiation of MG-63 osteoblast-like cells and human gingival fibroblasts (HGFs) cultured on titanium surfaces. MG-63 cells were used for sandblasted, large grit, and acid-etched (SLA) titanium surfaces, and HGFs were used for machined (MA) titanium surfaces. SLA and MA specimens were subdivided into four groups (n = 12) according to the combination of surface treatments (UV treatment and/or ALN immersion) applied. After culturing MG-63 cells and HGFs on titanium discs, cellular morphology, proliferation, and differentiation were evaluated. The results revealed that UV treatment of titanium surfaces did not alter the proliferation of MG-63 cells; however, HGF differentiation and adhesion were increased in response to UV treatment. In contrast, ALN immersion of titanium discs reduced MG-63 cell proliferation and changed HGFs into a more atrophic form. Simultaneous application of UV treatment and ALN immersion induced greater differentiation of MG-63 cells. Within the limitations of this cellular level study, simultaneous application of UV treatment and ALN immersion of titanium surfaces was shown to improve the osseointegration of titanium implants; in addition, UV treatment may be used to enhance mucosal sealing of titanium abutments.

This article describes a workflow based on a top-down approach to provide a fixed-type immediate interim restoration after placing a single implant using a digitally driven surgical guide and a matrix-positioning device. A characteristic of the technique is that both the surgical guide and the matrix-positioning device are fabricated from a single diagnostic virtual trial restoration designed on computer-aided design (CAD) software. This workflow may shorten the time required for chairside placement of an interim restoration and enhance esthetics when rehabilitating anterior teeth.

PURPOSE Error testing at each stage of prosthetic manufacturing remains relatively underdeveloped for computer-aided design/computer-aided manufacturing methods, and no experimental studies have validated the computer-aided design programs. This study aimed to test the accuracy and trueness of the computer-aided design of a three-unit fixed prosthesis. MATERIALS AND METHODS Three computer-aided design programs (Exocad, Dental System™, and inLab 16) were tested on the designs of a three-unit fixed partial denture, and a three-dimensional analysis program was used to calculate the internal clearance error for the computer-aided design prostheses. The Kruskal-Wallis and Dunn's post hoc tests were used to reveal significant differences in trueness between the three computer-aided design programs (α < 0.05). RESULTS Dental System™ showed the lowest mean error values for #24 and #26 at the mesial margin (both 0 µm), mesial wall (0.10, 0.12 µm, respectively), occlusal surface (-0.05, 0.10 µm), distal wall (0.23, -0.02 µm), and distal margin (both 0 µm). In sum, except for the mesial margin and distal margin site of tooth #26, the mean error value of Dental System™ was statistically the lowest, followed by those of Exocad and inLab 16 (p < 0.003). CONCLUSIONS The accuracy of computer-aided design differed according to the type of computer-aided design program. Dental System™ achieved the best trueness at the margins, axial walls, and occlusal surface, followed by Exocad and inLab 16.

A novel design of removable partial dentures (RPDs) is described wherein custom abutments are incorporated into the RPD framework. The artificial teeth and custom abutments are designed by using a computer-aided design (CAD) software program. Subsequently, the RPD framework is designed and merged to the custom abutments in the CAD software program to form a single unit. This modified framework is additively manufactured in metal by using a 3D printer. Thereafter, the framework is adapted to the definitive cast and scanned by using a laboratory scanner. The scanned file is imported into the CAD software, and the artificial teeth are redesigned. After fabricating each artificial tooth from a polymethylmethacrylate disk and artificial tooth and denture-base assemblies from a wax disk, the RPD is injection molded. This RPD design and fabrication workflow enables a top-down approach by prioritizing the shape and arrangement of the artificial teeth and facilitates their replacement.

To evaluate the accuracy of metal 3D printed frameworks (MEP group) for removable partial dentures (RPDs) by digital superimposition, in comparison to that of frameworks produced by the conventional (CON group) and resin printing/casting (RPC group) workflows.A partially edentulous maxillary dentiform was prepared with rest seats and guiding planes on the right canine, left first premolar, and left second molar. Thirty master casts were prepared via repeated impressions of the dentiform. Frameworks were fabricated by three different workflows (n = 10 for each group). The internal discrepancies of the frameworks were assessed at 12 points by digital scanning with an optical triangulation principle-based tabletop scanner and superimposition using a reference best-fit alignment method. First, the master cast was scanned alone. Subsequently, a thin silicone material was applied to the framework and fitted onto the master cast, after which the framework was removed. Finally, the master cast with the silicone material attached was rescanned. The data from the two scans were matched, with the reference being the area not occupied by the silicone.For the CON, MEP, and RPC groups, respectively, the mean overall internal discrepancies (279.72 µm, 241.02 µm, and 331.70 µm), and the mean internal discrepancies on palate areas (292.92 µm, 250.72 µm, and 355.84 µm) and rest seat areas (240.12 µm, 211.91 µm, and 259.26 µm) did not significantly differ among the three fabrication methods (p = 0.558, 0.542, and 0.774).The reference best-fit alignment of scan datasets is a useful approach to evaluate the internal discrepancy of frameworks. Metal 3D printing produces RPD frameworks that are comparable to conventional frameworks and meet clinical standards.

The present study aims to compare the accuracy of metal sleeve-free 3D-printed computer-assisted implant surgical guides (MSF group) (n = 10) with metal sleeve-incorporated 3D-printed computer-assisted implant surgical guides (MSI group) (n = 10). Implants of diameter 4.0 mm and 5.0 mm were placed in the left second premolars and bilateral first molars, respectively, using a fully guided system. Closed-form sleeves were used in teeth on the left and open-form sleeves on the right. The weight differences of the surgical guides before and after implant placement, and angular deviations before and after implant placement were measured. Weight differences were compared with Student&rsquo, s t-tests and angular deviations with Mann&ndash, Whitney tests. Cross-sectional views of the insert parts were observed with a scanning electron microscope. Preoperative and postoperative weight differences between the two groups were not statistically significant (p = 0.821). In terms of angular deviations, those along the mesiodistal direction for the left second premolars were significantly lower in the MSF group (p = 0.006). However, those along the mesiodistal direction for the bilateral molars and those along the buccolingual direction for all teeth were not significantly different (p &gt, 0.05). 3D-printed implant surgical guides without metal sleeve inserts enable accurate implant placement without exhausting the guide holes, rendering them feasible for fully guided implant placement.

In the published publication [...]

PURPOSE To evaluate the accuracy of three digitization methods for the maxillary dental arch. MATERIALS AND METHODS A maxillary typodont with various tooth preparation designs was used as the reference model. The scanned data were classified into direct scanning (DS), cast scanning (CS), and impression scanning (IS) groups according to the techniques applied for digitization (n = 10/group). An intraoral scanner was used for the DS group. Impressions obtained with polyether impression material were scanned with a tabletop scanner for the IS group. For the CS group, the definitive casts fabricated from the obtained impressions were scanned with the same tabletop scanner. The accuracy (trueness and precision) of the produced virtual dental casts was evaluated with specialized software. The full-arch and individual abutment deviations were measured with regard to root mean square error (RMSE) values. Data were analyzed with statistical software with an α=0.05 . RESULTS The RMSE values for both trueness and precision were lowest in the IS group, followed by the CS and DS groups, with statistically significant differences among the groups (p < 0.05). The trueness of individual abutments was significantly higher in the IS group than in the DS group. In addition, the trueness of individual abutments was affected by the location of the abutments in the DS group, whereas it did not differ between individual abutments in the CS and IS groups. CONCLUSIONS These findings suggest that the IS method is an accurate digitization technique for the creation of a virtual dental cast.

Statement of problem Intraoral scanners are effective for direct digital impression when dental restorations are fabricated using computer-aided design and computer-aided manufacturing (CAD-CAM); however, if the abutment tooth cannot be dried completely or the prepared margin is placed subgingivally, accurate digital images cannot always be guaranteed. Purpose The purpose of this in vitro study was to compare the internal and marginal discrepancies of zirconia copings fabricated directly using an intraoral scanner with those fabricated indirectly with impression scanning. Material and methods Forty-five resin dies fabricated with a 3-dimensional (3D) printer were divided into 3 groups: direct scanning (DS), impression scanning (IMP), and lost-wax casting (LW). For the DS group, a resin die was scanned with an intraoral scanner (Trios; 3Shape), whereas for the IMP group, impressions made with polyether were scanned with a cast scanner (D700; 3Shape). The zirconia copings were fabricated in the same way in the DS and IMP groups. For the LW group, impressions were made in the same way as in the IMP group, and Ni-Cr alloy copings were fabricated using LW. The marginal and internal discrepancies of the copings were measured by cementing them onto resin dies, embedding them in acrylic resin, and sectioning them in a buccolingual direction. The cement layer was measured, and the Kruskal-Wallis test was used to detect significant differences (α=.05). A nonparametric Friedman test was also performed to compare the measurements of each group by location (α=.05). Results The mean marginal discrepancies in the DS, IMP, and LW groups were 18.1 ±9.8, 23.2 ±17.2, and 32.3 ±18.6 μm (mean ±standard deviation), respectively. The mean internal discrepancies of the DS, IMP, and LW groups in the axial area were 38.0 ±9.1, 47.0 ±16.3, and 36.5 ±15.8 μm, and those in the occlusal area were 36.7 ±16.9, 33.4 ±21.6, and 44.5 ±31.9 μm, respectively. No statistically significant differences were found in marginal or internal discrepancies among groups ( P >.05). Conclusions Within the limitations of this study, the zirconia copings fabricated with CAD-CAM using different digitization methods and Ni-Cr copings fabricated using the lost-wax technique and casting produced clinically acceptable marginal and internal discrepancies. No significant differences were found among the DS, IMP, and LW groups.

Clinical studies evaluating the tissue surface adaptation of complete denture bases fabricated by digital light processing (DLP) are lacking.The purpose of this clinical study was to assess the tissue surface adaptation of complete denture bases generated by the DLP technique and to compare the adaptation with that of denture bases manufactured by 5-axis milling (MIL) and pack-and-press (PAP) method.A total of 9 participants with 12 edentulous arches (7 maxillary and 5 mandibular) were included in this study. For each edentulous arch, the complete denture bases with occlusion rims were prepared by 3 different techniques (PAP, MIL, and DLP). A virtual denture base with occlusion rim was designed by means of a digital subtraction tool and served to fabricate the DLP and MIL denture bases. The complete denture bases were placed intraorally with an indicator applied to the intaglio surfaces. The thickness of the indicator was measured within the denture-bearing areas and anatomic landmarks of the edentulous arch to obtain the absolute tissue surface adaptation (ATA) value. The relative tissue surface adaptation (RTA) value was calculated from the differences between the ATA values of DLP or MIL techniques and those of the PAP technique. The Kruskal-Wallis test and the McNemar test were used for statistical analysis (α=.05).No statistically significant differences were found among the 3 denture base fabrication techniques with respect to the ATA values of either arch (P.05). In terms of the RTA values for the maxillary arch, the DLP base was significantly different from the MIL base in the RC and P areas (both P.05). The DLP base exhibited a higher frequency of negative RTA values than the MIL base. Regarding the RTA values for the mandibular arch, no significant differences were detected between the DLP and MIL denture bases (P.05).The DLP and MIL denture bases demonstrated clinically acceptable tissue surface adaptation to both edentulous the maxilla and mandible. The DLP denture base was likely to exhibit intimate tissue adaptation in the stress-bearing areas of maxillary arches compared with the PAP denture base. The maxillary MIL denture base was likely to exhibit small gaps between the supporting tissue and denture base. Both DLP and MIL mandibular denture bases were likely to show intimate adaptation on the lingual slope compared with the PAP base.

Limited evidence is available comparing the differences between pre-operative and post-operative 3D implant positions from the viewpoint of prosthetics. We aimed to investigate the differences between preplanned positions of virtual provisional restorations and their actual positions following fully guided single-implant placement. Ten maxillary typodonts with missing right central incisors were imaged using cone-beam computed tomography, and digital impressions were obtained using an intraoral scanner. These data were imported into implant-planning software, following which the provisional restorations were designed. After data superimposition, an appropriate implant position was determined, and a computer-assisted implant surgical guide was designed for each typodont. Orders generated from the implant-planning software were imported into relevant computer-aided design software to design the custom abutments. The abutments, provisional restorations, and surgical guides were fabricated, and each restoration was cemented to the corresponding abutments, generating a screw-type immediate provisional restoration. The implants were placed using the surgical guides, and the screw-type provisional restorations were engaged to the implants. The typodonts were then rescanned using the intraoral scanner. The restorations designed at the treatment planning stage were compared with those in the post-operative scan using metrology software. The angular deviation around the central axis of the implant was measured, and the differences in the crown position were converted to root mean square (RMS) values. The post-operative provisional restorations exhibited an absolute angular deviation of 6.94 &plusmn, 5.78&deg, and an RMS value of 85.8 &plusmn, 20.2 &micro, m when compared with their positions in the pre-operative stage. Within the limitations of the present in vitro study, the results highlight the potential application of customized prefabricated immediate provisional restorations after single-implant placement.

This technical procedure demonstrates a 4-step completely digital workflow for the fabrication of complete dentures in edentulous patients. The digital scan data of the edentulous arches were obtained using an intraoral scanner, followed by the fabrication of modeless trial denture bases using additive manufacturing. Using the trial denture base and a wax rim assembly, the interarch relationship was recorded. This record was digitized using an intraoral scanner and reversed for each maxillary and mandibular section individually. The digital scan data directly obtained using the intraoral scanner were superimposed over the reversed data, establishing a proper interarch relationship. The artificial teeth were arranged virtually and try-in dentures were additively manufactured. Subsequently, the gingival and tooth sections were additively manufactured individually and characterized. Thus, fabrication of digital complete dentures can be accomplished using digital data characteristics. The workflow includes data acquisition using an intraoral scanner, data processing using reverse engineering and computer-aided design software programs, and additive manufacturing.

Statement of problem Tissue-level internal connection implants are widely used, but the difference in abutment screw stability because of the shoulder coverage formed by the contact between the shoulder of the implant collar and the abutment remains unclear. Purpose The purpose of this finite element analysis (FEA) and in vitro study was to investigate stress distribution and abutment screw stability as per the difference in shoulder coverage of the abutment in tissue-level internal connection implants. Material and methods Abutments were designed in 3 groups as per the shoulder coverage of the implant collar, yielding complete coverage (complete group), half coverage (half group), no coverage (no group) groups. In the FEA, a tightening torque of 30.0 Ncm was applied to the abutment screw, a force of 250 N was applied to the crown at a 30-degree angle, and the von Mises stresses and the stress distribution patterns were evaluated. In the in vitro study, the groups were tested (n=12). A total of 200 000 cyclic loads were applied at 250 N, 14 Hz, and at a 30-degree angle. Removal torque values and scanning electron microscopy (SEM) images were assessed. Removal torque values were analyzed by ANOVA and paired t tests. Results The maximum von Mises stress of the abutment screw was the lowest in the complete group, slightly higher in the half group, and highest in the no group. High stresses were concentrated in 1 location in the implant abutment connection area of the no group. The removal torque values after loading were significantly lower in the no group than in the complete group (P=.047). The SEM images revealed concentrated structural loss and wear in 1 location of the no group. Conclusions FEA and in vitro studies confirmed that the shoulder coverage of the abutment in the tissue-level internal connection implant helped improve screw stability. Cyclic loading reduced the removal torque of the abutment screw.

To evaluate the accuracy of three digitization methods for the maxillary dental arch.A maxillary typodont with various tooth preparation designs was used as the reference model. The scanned data were classified into direct scanning (DS), cast scanning (CS), and impression scanning (IS) groups according to the techniques applied for digitization (n = 10/group). An intraoral scanner was used for the DS group. Impressions obtained with polyether impression material were scanned with a tabletop scanner for the IS group. For the CS group, the definitive casts fabricated from the obtained impressions were scanned with the same tabletop scanner. The accuracy (trueness and precision) of the produced virtual dental casts was evaluated with specialized software. The full-arch and individual abutment deviations were measured with regard to root mean square error (RMSE) values. Data were analyzed with statistical software with anThe RMSE values for both trueness and precision were lowest in the IS group, followed by the CS and DS groups, with statistically significant differences among the groups (p0.05). The trueness of individual abutments was significantly higher in the IS group than in the DS group. In addition, the trueness of individual abutments was affected by the location of the abutments in the DS group, whereas it did not differ between individual abutments in the CS and IS groups.These findings suggest that the IS method is an accurate digitization technique for the creation of a virtual dental cast.

This clinical report describes the rehabilitation of a patient with a history of mandibulectomy that involved the use of a fibula free flap and an implant-supported fixed complete denture. A recently introduced material, polyetherketoneketone, was used as the framework material for the prosthesis, and the treatment produced favorable esthetic and functional results.

Objectives The purpose of this study was to determine the effects of alendronate on the peri-implant bone in rat maxillae with the aid of micro-computed tomographic, histologic, and biochemical analyses. Materials and Methods Thirty-six male Sprague-Dawley rats were used. After extraction of the maxillary first molars, each rat was given periodic subcutaneous injections of either alendronate (alendronate group) or saline (control group). Customized implants were placed bilaterally 4 weeks after these injections. The rats were sacrificed at either 4, 8, or 12 weeks after implantation (4-, 8-, and 12-week groups, respectively; n = 6 rats per group). Microcomputed tomographic and histologic analyses were conducted for all rats. Biochemical analyses were performed at four time points for the 12-week groups. Results There were no significant differences between the groups on microcomputed tomographic and histologic analyses. All of the measured biochemical parameters tended to decrease over time, with significant differences among some time points within each group. The serum osteocalcin level was significantly lower in the 12-week alendronate group than in the control group (P

This report describes the case of a patient who required rehabilitation of their maxillary anterior teeth following a traumatic injury through a physical altercation. The decision was made to extract the maxillary central incisors and maxillary right lateral incisor, perform immediate implantation on the maxillary right lateral incisor and left central incisor areas, and place a three-unit immediate provisional restoration. Predesigned virtual teeth enabled efficient fabrication of the immediate provisional restoration following the implant placement. After a sufficient healing period with periodic check-ups, final impressions were made using a digital approach, with meticulous care taken to preserve the gingival architecture around the sites of rehabilitation. Thus, the custom abutments and definitive restoration were placed without eliciting an uncomfortable feeling in the patient. Both esthetic and functional outcomes were satisfactory. Reduced soft tissue volume around the implant restoration was observed, primarily within the two months post-extraction/implantation, based on superimposition of the serial scan data. Soft tissue volume changes in the present case suggest the need for controlled clinical studies of three-dimensional changes of gingival contours after extraction and/or implantation.

Objective To determine the effects of alendronate on bone remodeling around osseointegrated implants in rats. Materials and methods The maxillary first molars were extracted from 36 male Sprague-Dawley rats, and replaced with customized implants. They were then administered twice-weekly subcutaneous injections of either alendronate (alendronate group) or saline (control group) after allowing a 4-week period for osseointegration. They were killed at 4, 8, or 12 weeks after the commencement of the injection protocol, and the implant sites were evaluated comprehensively by microcomputed tomographic, histologic, and biochemical assessments. Results It was hard to find statistically significant differences from microcomputed tomographic analyses. In addition, inconsistent variations were derived from histologic data. However, biochemical data showed statistically significant differences; serum osteocalcin level was statistically significantly lower in the alendronate group than in the control group at 8 weeks after the commencement of injections. In addition, serum osteocalcin level in the alendronate group was statistically significantly lower at 8 and 12 weeks after the initial injection point than at preinjection. Conclusions The results suggest alendronate might affect bone remodeling activity around osseointegrated implants negatively, and serum osteocalcin could serve as an accessory tool to evaluate this effect.

과도한 치아 마모는 교합면에 손상을 야기하고, 치수 병변, 교합 부조화, 기능장애, 심미적 문제 등을 야기할 수 있다. 과도한 치아 마모를 갖고 있는 환자들을 치료하고자 할 때 수직교합고경(vertical dimension of occlusion, VDO)의 상실 여부와 수복을 위한 악간 공간의 적절성 여부에 기반하여 분류를 할 필요가 있다. 본 증례의 환자는 다수 치아들의 마모를 지닌 50세의 남성으로, 과도한 치아 마모가 있지만 수직교합고경의 상실은 없으며 수복을 위한 악간 공간이 부족하였다. 이러한 경우 수직교합고경을 증가시켜 치료를 진행하는 것을 고려할 수 있다. 수직교합고경의 증가를 필요한 범위 내에서 최소로 줄이고, 증가된 수직교합고경 상에서 안정화 기간을 거친 뒤 안정된 교합 접촉을 제공할 수 있다면, 수직고경 증가를 동반한 치료법은 안정성을 가질 수 있다. 본 남성 환자를 치료하기 위해 수직고경의 증가를 동반하여 전치부와 구치부에서 단일구조 지르코니아를 이용한 고정성 보철물로 수복을 하였다. 일련의 치료과정을 통하여 기능적인 면과 심미적인 면에서 만족스러운 결과를 얻었기에 보고하는 바이다. 【Excessive occlusal wear results in unacceptable damage to the occluding surfaces, and can cause pulpal injury, occlusal disharmony, impaired function, and aesthetic deformity. Patients with severely worn dentition need to be classified as several categories relative to the vertical dimension of occlusion (VDO) and the interocclusal distance for the prosthetic space. When treating patients classified as those who have excessive wear without loss of occlusal vertical dimension but with limited space, we could consider treating them at an increased vertical dimension of occlusion. Treatments at an increased vertical dimension of occlusion may provide stability, given that the amount of its increase was minimal, and a perfected occlusion was achieved after enough stabilization period. A 50-year-old male visited the department of Prosthodontics in Yonsei University Dental Hospital with the chief complaint of worn teeth on lower anterior area. Reconstruction at an increased vertical dimension of occlusion was planned. After the compatibility of the new vertical dimension of occlusion had been confirmed under interim fixed restorations, definitive fixed restorations composed of full-contour monolithic zirconia prostheses were placed. This case presents that a satisfactory clinical result was achieved by restoring the worn dentition at an increased vertical dimension of occlusion with an improvement in esthetics and function.】