Search

This article seeks to discuss how religion affects gender inequality in Ghana. Religious teachings and beliefs play an important role in either promoting or hindering gender equality. Defining ‘‘religion’’ with a common definition has become a major enterprise for theologians. From the biblical perspective, the impact of females is rarely felt, due to the socio-cultural injunctions purported to have come from the Graeco-Roman world. The subjugation of women is still common in all spheres of life including Ghana and religion has a role to play in this phenomenon. Using the works of various scholars, this article explored the extent of the influence of religion on gender inequality from the Christian perspective. It was observed that despite its influence on social development, Religion has not promoted the needed gender equality in Ghana. The church and society, therefore, need to confront the issue of gender inequality and sanction women’s equality with their male counterparts. This study adds to the existing literature on the need to break gender inequality in all spheres of life in this 21st century. Keywords: Religion, Culture, Patriarchy, Gender Inequality.

Background: Schistosomiasis affects an estimated 250 million people worldwide, with 200,000 people dying each year. Despite success in managing the disease, data on its prevalence in non-endemic areas is rare. This study assessed the prevalence and risk factors of urogenital schistosomiasis among people in the Devego sub-municipality of the Ketu North Municipal Volta region, Ghana. Methods: A cross-sectional study design was conducted among 335 respondents. Data was collected using a semi-structured questionnaire. Urine samples were examined microscopically to identify S. haematobium ova. Categorical data was analyzed and presented as percentages or frequencies. Means, medians and standard deviations were used to summarize the continuous variables. Chi-square/Fishers Exact test was used to determine the associations between the independent and dependent variables and considered significant if P-value was less than 0.05. Results: The study found 34.6% (116/335) prevalence rate of urinary schistosomiasis among the 335 participants studied. The prevalence rate was 58.6% (68/116) in male respondents and 41.4% (48/116) among female respondents. Respondents aged 11-15 years recorded the highest (41.4%) prevalence. Major risk factors associated with urinary schistosomiasis were; swimming, fetching of water, bathing and washing of cloths ((X2=21.207, P-value < .02); frequency of exposure to fresh water (X2 = 14.684, P = .005, CL = 95%). Conclusion: Urinary schistosomiasis is common in remote communities with fresh water sources. Chemoprevention should be extended to schistosomiasis non-endemic communities with fresh water sources.

This article is an investigation of the role of women in the Kwadaso Area, Kumasi in the Ashanti Region of the Church of Pentecost (CoP) in Ghana. It is stimulated by the realisation that while many of the Mainline Churches, as well as the African Independent Churches and Charismatic Churches have created avenues for women to play key roles and ordaining some as ministers at various levels, the CoP does not ordain female ministers.This entrenched position of the CoP has made its leadership (pastoral responsibilities) a male-dominated one in the context of not allowing females to become either District Pastors or Area Heads or to be called into the full-time. This action of the church is similar to the patriarchal structures of the Jewish community. This study used both primary and secondary sources in the collection of data. The data collection consisted of interviews, questionnaires and observations to assess whether the CoP has cultural challenges when it comes to the appointment of women into leadership positions. It was observed that, the highest leadership position a woman would be allowed to occupy in the CoP was a Deaconess. Also, the CoP has not officially opened up to discussions on the need to create gender equality when it comes to the appointment of members into leadership positions. The study recommended that the CoP should open up to discussions on the issue since the status of women. Again, the CoP leadership should re-look its Constitution with regards to enrolling only males into the ordained ministry.This study adds to the existing literature on women’s empowerment in the African Church. Keywords: The Church of Pentecost (CoP), Culture, Leadership, Gender roles, gender inequality, gender equality.

This study aimed to examine Occupational Safety and Health (OSH) Compliance in the Artisanal Small-Scale Gold Mining (ASGM) sector in Ghana with a focus on Adadiem and identify the challenges associated with it. A quantitative research method was employed and all 248 survey respondents were sampled. The study revealed a lack of compliance with OSH practices, and “hit by working tools” and slipping/falling were identified as the most common types of safety hazards leading to minor injuries in the ASGM industry. It was also observed that working tools and machinery are the main sources of injuries and mostly affect the legs, knees, and feet. The findings of the study indicate the presence of OSH breaches in the ASGM industry in the study area. It is therefore proposed that the government of Ghana create and enforce legislation that places stringent requirements on ASGM operators to ensure that they are meeting OSH standards and protecting the health and safety of their workers, and that policy tools such as fines, taxes, restrictions, and subsidies may be employed to promote compliance with safety requirements.

Many occupational settings located outdoors in direct sun, such as open cut mining, pose a health, safety, and productivity risk to workers because of their increased exposure to heat. This issue is exacerbated by climate change effects, the physical nature of the work, the requirement to work extended shifts and the need to wear protective clothing which restricts evaporative cooling. Though Ghana has a rapidly expanding mining sector with a large workforce, there appears to be no study that has assessed the magnitude and risk of heat exposure on mining workers and its potential impact on this workforce. Questionnaires and temperature data loggers were used to assess the risk and extent of heat exposure in the working and living environments of Ghanaian miners. The variation in heat exposure risk factors across workers’ gender, education level, workload, work hours, physical work exertion and proximity to heat sources is significant (p

Increasing temperature and climate warming impacts are aggravating the vulnerability of workers to occupational heat stress. Adaptation and social protection strategies have become crucial to enhance workers’ health, safety, productive capacity and social lives. However, the effective implementation of work-related heat stress adaptation mechanisms appears to be receiving little attention. This study assessed the barriers to occupational heat stress adaptation and social protection strategies of mining workers in Ghana. Based on a mixed methods approach, focus group discussions and questionnaires were used to elicit data from 320 mining workers. Workers’ adaptation strategies (water intake, wearing loose and light-coloured clothing, participating in training programmes, taking regular breaks, use of mechanical equipment, use of cooling systems and housing designs) varied significantly across the type of mining activity (p

Record-breaking summer heat events are increasing in frequency in Zimbabwe and 2016 was a particularly hot year with the country experiencing its worst heat wave event in decades. Currently, Zimbabwe has no coordinated public health response to deal with heat wave events and no specific data on heat-related morbidity and mortality. The country has no legislation for protecting workers against environmental heat exposure, particularly those most vulnerable who are employed in the informal sector. These workers are also at risk due to their outdoor work environments. The article outlines the state of climate and heat stresses in Zimbabwe, as benchmarked against other African countries and France. It further summarizes outdoor workers' susceptibility to heat exposure and the need for the Zimbabwean Government to develop policies to ensure the health and safety of an increasing population of outdoor workers in Zimbabwe.

Many factors including depletion of the forest, environmental awareness, and generation of large quantities of agro-forest residues have increased the need to partially or wholly replace wood with agro-forest residue for particleboard production. This study assessed the decay resistance of particleboards produced from four agro-forest residues using cassava starch and urea formaldehyde as adhesives. Musa paradisiaca pseudostem, Theobroma cacao stem and pod, and sawdust of Ceiba pentandra were used for the study. Properties determined were: Weight loss, decay resistance rating and decay susceptibility index. These properties were evaluated after 12 weeks of exposure to Coriolopsis polyzona in accordance with ASTM D 2017-05. The results indicate that the weight loss for Musa paradisiaca pseudostem particleboard was least for both urea formaldehyde and cassava starch adhesives. Even though almost all the particleboards produced were classified as resistant or highly resistant to fungi attack, those produced with urea formaldehyde had better decay resistance properties than that of cassava starch. Furthermore, particleboards coated with synthetic polyvinyl lacquer had better resistance to fungi attack than the uncoated ones. At 5% level of significance, the agro-forest residue, adhesive and surface finish as well as their interactions had significant effects on decay resistance of the particleboards produced. It is recommended that further studies which aim at determining the effect of combination of the agro-forest residues and that of urea formaldehyde and cassava starch be conducted to determine their effects on decay properties of particleboards.

This study investigated the possible use of four agro-forest residues generated in Ghana as an alternative raw material for particleboard manufacture using cassava starch and urea formaldehyde as adhesives. The particle size of the materials ranged from 0.5 mm to 1.5 mm. An industrial pressing machine was used to press the homogeneous single layer particleboard. Physical and mechanical properties were determined in accordance with ASTM D 1037-06a and ASTM D 7519-11. The results indicate that the density of the particleboards produced ranged from 421 kg/m3 to 598 kg/m3. The water absorption property of the particleboards also ranged from 7.66% to 22.41% and 18.17% to 59.46% for 2-hour and 24-hour immersions respectively. Additionally, the thickness swelling of the particleboards ranged from 3.38% to 5.03% and 9.37% to 21.49% for 2-hour, and 24-hour immersions respectively. The results further indicate that the modulus of elasticity, modulus of rupture, internal bond strength and hardness of the particleboards produced for both cassava starch and urea formaldehyde were adequate. Comparatively, for all the agro-forest materials used for this study, the physical and mechanical properties of the particleboards produced using urea formaldehyde as adhesive was better than those produced using cassava starch as adhesive. It could be concluded that the particleboards produced could be used for indoor applications or interior furnishings, under dry conditions. Additionally, it is recommended that further studies that combine cassava starch and urea formaldehyde as adhesives be conducted, as well as studies on combining plantain pseudostem and cocoa pod in particleboard production.

Adverse effects of occupational heat stress in the context of the changing climate on working populations are subtle but considerably harmful. However, social dimensions and impacts of climate change-related occupational heat concerns on workers' safety and health, productivity and well-being are often overlooked or relegated as minor issues in social impact analyses of occupational heat exposure due to climate change. This paper offers a conceptual framework based on an appraisal and synthesis of the literature on social impacts of climate change-related occupational heat exposure on workers' safety and health, productivity and social welfare and the quest to localise and achieve sustainable development goals. A sustained global, national, institutional and individual collaborative involvement and financial support for research, improved adaptation and social protection strategies, predominantly in the developing world, where a large number of people work outdoors, can reduce heat exposure and boost the resilience and adaptive capacity of workers to facilitate efforts to achieve sustainable development goals.

Research has proven that pelletized sawdust fuel is a possible replacement for charcoal and firewood. However, the conventional coal pot does not correctly support the use of pelletized sawdust as ...

Background The Suboptimal Health Status Questionnaire-25 (SHS-Q-25) developed to measure Suboptimal Health Status has been used worldwide, but its construct validity has only been tested in the Chinese population. Applying Structural Equation Modelling, we investigate aspects of the construct validity of the SHS-Q-25 to determine the interactions between SHS subscales in a Ghanaian population. Methods The study involved healthy Ghanaian participants (n = 263; aged 20–80 years; 63% female), who responded to the SHSQ-25. In an exploratory factor and parallel analysis, the study extracted a new domain structure and compared to the established five-domain structure of SHSQ-25. A confirmatory factor analysis (CFA) was conducted and the fit of the model further discussed. Invariance analysis was carried out to establish the consistency of the instrument across multi-groups. Results The extracted domains were reliable with Cronbach’s $$\alpha$$ α of 0.846, 0.820 and 0.864 respectively, for fatigue, immune-cardiovascular and cognitive. The CFA revealed that the model fit indices were excellent $$\left( {{\text{RMSEA}} = 0.049~ < ~0.08,\,{\text{CFI}} = 0.903 > 0.9,\,{\text{GFI}} = 0.880 < 0.9,\,{\text{TLI}} = 0.907 > 0.9} \right)$$ RMSEA = 0.049 < 0.08 , CFI = 0.903 > 0.9 , GFI = 0.880 < 0.9 , TLI = 0.907 > 0.9 . The fit indices for the three-domain model were statistically superior to the five-domain model. There were, however, issues of insufficient discriminant validity as some average variance extracts were smaller than the corresponding maximum shared variance. The three-domain model was invariant for all constrained aspects of the structural model across age, which is an important risk factor for most chronic diseases. Conclusion The validity tests suggest that the SHS-Q25 can measure SHS in a Ghanaian population. It can be recommended as a screening tool to early detect chronic diseases especially in developing countries where access to facilities is diminished.

The effect of the deposition strategy on wire + arc additive manufacture (WAAM) has been conducted for aluminium alloys. In this study, oscillation and parallel deposition strategies were considered for thicker section linear wall building. The results indicate that the deposition strategy has a significant effect on mechanical properties and hardness of the WAAM structure. Optimum ultimate tensile and yield strength were identified after post-deposition heat treatment for both strategies. From microstructure analysis, it was observed that walls produced by oscillation deposition strategy were characterised by equiaxed grains whilst parallel deposited walls were characterised by a mixed grain structure consisting of columnar and equiaxed grains. It was also observed that parallel deposited walls showed an increased number of pores as compared to walls deposited using oscillation strategy. For the studies conducted on aluminium wire + arc additive manufacture, it has been found that the deposition strategy plays an important role in the quality of walls produced

Many occupational settings located outdoors in direct sun, such as open cut mining, pose a health, safety, and productivity risk to workers because of their increased exposure to heat. This issue is exacerbated by climate change effects, the physical nature of the work, the requirement to work extended shifts and the need to wear protective clothing which restricts evaporative cooling. Though Ghana has a rapidly expanding mining sector with a large workforce, there appears to be no study that has assessed the magnitude and risk of heat exposure on mining workers and its potential impact on this workforce. Questionnaires and temperature data loggers were used to assess the risk and extent of heat exposure in the working and living environments of Ghanaian miners. The variation in heat exposure risk factors across workers' gender, education level, workload, work hours, physical work exertion and proximity to heat sources is significant (p0.05). Mining workers are vulnerable to the hazards of heat exposure which can endanger their health and safety, productive capacity, social well-being, adaptive capacity and resilience. An evaluation of indoor and outdoor Wet Bulb Globe Temperature (WBGT) in the working and living environment showed that mining workers can be exposed to relatively high thermal load, thus raising their heat stress risk. Adequate adaptation policies and heat exposure management for workers are imperative to reduce heat stress risk, and improve productive capacity and the social health of mining workers.

Across the tropical developing countries, smallholder farmers are confronted with various climate related risks that hinge on agricultural activities. Climate change is predicted to impact smallholder farmers and their livelihood, especially within and beyond this century. Several studies have examined the impact of drought and rainfall on smallholder farmers as climate change impact assessment. However, there is limited information on impacts and coping strategies of poor farmers to heat exposure at household and farm level in tropical developing countries. As global temperature is predicted to increase with robust impacts on farmers in African region due to poverty and low adaptive capacity, this study evaluates how farmers in Bawku East of Northern Ghana experience the impacts of heat stress and how they cope with it both at the household level and on the field of cultivation. Using household survey and focus group discussion, the authors elicited impacts and responses of heat exposure from 308 resident farmers in three selected farming communities in Bawku East to gauge their vulnerability to heat exposure. Even though farmers have various impacts and coping strategies to heat exposure, these are ineffective to prevent them from heat related morbidity and mortality at both household and farm level. The study recommends the need for government led intervention to assist farmers in their effort to cope with heat stress as global temperatures will exacerbate heat stress impacts on small holder farmers especially in African region., Risk; Climate; Exposure; Farmers. Heat; livelihood, Bawku East, Climate change, heat stress; Agricultural Science; Environmental Science; Health Sciences.

Dimensions of risks and impacts of occupational heat stress due to climate change on workers' health and safety, productivity, and social well-being are significantly deleterious. Aside from empirical evidence, no systematic review exists for policy development and decision making in managing occupation heat stress impacts and adaptation strategies of workers. This study sought to synthesise evidence on the social impacts of occupational heat stress and adaptation strategies of workers. From a review of existing literature, eight categories were obtained from 25 studies and grouped into three syntheses: (1) awareness of occupational heat stress, (2) social impacts of occupational heat stress and (3) workers' adaptation to occupational heat stress due to changing climate. Awareness of occupational heat stress among workers varied and their social impacts were related to workers' health and safety, productivity and social well-being. Sustainable adaptation to occupation heat stress due to climate change hinges on financial resource availability. Adequate investment and research are required to develop and implement policies to combat the threat of rising temperature and climate change to enhance workers' adaptive capacity, boost resilience and foster sustainable development.

Rosewood (Pterocarpus erinaceus Poir.) is valued for flooring, ornaments, musical instruments and furniture-making due to its durability, strength, beauty and acoustic properties. It coppices easily which could boost its continual supply. Compression parallel to grain, Modulus of Elasticity (MOE) and Modulus of Rupture (MOR) within coppiced and non-coppiced boles were determined. These properties decreased along both types of boles. Strength values for the heartwood were also greater than those for the sapwood of each type of bole. MOE, MOR and compression for non-coppiced stems were greater than those from the coppiced stems. The differences were significant (p

Current climate trends of extreme temperature and humidity during summer present a public health dilemma in Zimbabwe and other developing countries. National and local governments have defined roles to protect the health of populations under their jurisdictions as stipulated in relevant policies. The involvement of public health practitioners in policy development and management of heat-related illnesses is vital for the protection of the public, particularly vulnerable groups. The current role of health providers in developing countries regarding climate change impacts on health is considered suboptimal. Focus group interviews with public health practitioners and policy makers in the city of Bulawayo in Zimbabwe showed that officials lacked knowledge and awareness regarding heat-related impacts on health, particularly in relation to differences in individual susceptibility and currently employed heat adaptation and coping mechanisms.

Record-breaking summer heat events are increasing in frequency in Zimbabwe and 2016 was a particularly hot year with the country experiencing its worst heat wave event in decades. Currently, Zimbabwe has no coordinated public health response to deal with heat wave events and no specific data on heat-related morbidity and mortality. The country has no legislation for protecting workers against environmental heat exposure, particularly those most vulnerable who are employed in the informal sector. These workers are also at risk due to their outdoor work environments. The article outlines the state of climate and heat stresses in Zimbabwe, as benchmarked against other African countries and France. It further summarizes outdoor workers' susceptibility to heat exposure and the need for the Zimbabwean Government to develop policies to ensure the health and safety of an increasing population of outdoor workers in Zimbabwe.

Background Type II diabetes mellitus (T2DM) is complicated by multiple cardio-metabolic risk factors. Controlling these factors requires lifestyle modifications alongside utilisation of anti-diabetic medications. Different glucose lowering [(biguanides (BIGs), sulfonylureas (SUAs), thiazolidinediones (TNZ)], lipid lowering (statins), and anti-hypertensive medicines [angiotensin converting enzyme inhibitors (ACEIs), calcium channel blockers (CCBs), angiotensin II receptor blockers (ARBs) and central acting drugs (CADs)] have been approved for controlling hyperglycaemia, dyslipidaemia and hypertension respectively. Here, we examined factors that characterise T2DM and explored the response to medication therapy among T2DM patients. Methods This prospective cohort study recruited 241 T2DM patients reporting at a clinic in Ghana, from January through to August, 2016. Each patient’s demographic, medications and anthropometric data was obtained while information on medication adherence was captured using Morisky adherence scale-8 (MMAS-8). Fasting blood samples were collected for biochemical analysis. Results The mean age of participants was 57.82 years for baseline and six-month follow-up. Physical activity differed at baseline and follow up (p 0.05). Many participants using either ACEI or ARB were able to control their blood pressures. Among dyslipidaemia patients under statin treatment, there was an improved lipid profile at follow-up. Conclusions Statin medications are effective for reducing dyslipidaemia in T2DM patients. However, control of modifiable risk factors, particularly blood glucose and to a lesser degree blood pressure is suboptimal. Addressing these will require concomitant interventions including education on medication adherence and correct dietary plans, lifestyle modifications and physical activity. Electronic supplementary material The online version of this article (doi:10.1186/s40169-017-0162-5) contains supplementary material, which is available to authorized users.

Ghana’s healthcare expenditure has increased over the past two decades. Increased healthcare expenditures are required to enhance the acquisition of better hospital resources that may improve healthcare. This study presents an overview of healthcare expenditures and health outcomes (i.e. infant mortality, under-5 mortality and life expectancy) from 1995 to 2014 in Ghana. Infant and under-5 mortalities have declined by 50 and 25%, respectively, as of 2014, while life expectancy has increased from 60.7 to 64.8 years. Private spending on health, especially out-of-pocket payments, declined but is higher than the World Health Organization’s recommended financial threshold. Non-communicable diseases (NCDs) are rising with healthcare costs leading to catastrophically high healthcare expenditures in the future. While government’s investments on healthcare have yielded positive results, the improvement in the health outcomes cannot be attributed to increased health expenditure alone. Therefore, this paper outlines policies on maternal health, national health insurance and healthcare reforms that have influenced health outcomes. In parallel, the paper highlights challenges of the Ghana health system of which the major ones are (1) inadequate financial investments in health and (2) limited health workforce and facilities. These challenges can be ameliorated by (1) establishing new health institutions and expanding existed ones; (2) providing incentives to discourage the exodus of health workers; (3) introduction of the concept of predictive, preventive and personalized medicine (PPPM) for treating NCDs; and (4) alternative insurance schemes for vulnerable groups. This, coupled with the will of the government to curb misappropriation of funds, will be important to achieving better health outcomes.

This study investigated density and some anatomical features, and also assessed the correlations among them in stem and branch woods of Entandrophragma cylindricum, Entandrophragma angolense and Khaya ivorensis. Branch and stem wood samples were sampled from two natural forest reserves. Wood density was determined in accordance with ISO 3131 whereas anatomical investigations followed IAWA committee’s recommendations-1989. Results indicated that at 5% level of significance, wood density was significantly higher in branchwood than stemwood for all three species. Generally for all the three species, significant differences were found in fibre length and vessel diameter between branchwood and stemwood of same species but no significant differences were found in both ray and axial parenchyma quantities. Stemwood density correlated significantly and positively with fibre (r = 0.408, p

The paper describes the testing for termite resistance of a lesser-utilised tropical species known as kruma (Klainedoxa gabonensis) in order to evaluate its potential for the building, construction and related wood-consuming industries. Results suggest that kruma heartwood can be rated as very durable and the sapwood as durable. It is concluded that utilisation of this wood species could reduce over dependence on traditional primary species.

Health workers are prone to burnout, which can have an adverse effect on their person and the patients to whom care is offered. The goal of this paper was to assess the levels of burnout experienced by healthcare workers in Accra, Ghana. The study was conducted using the cross-sectional study design. Questionnaires were used to obtain data from 365 respondents who worked in 12 major healthcare facilities. Data obtained were analyzed with SPSS version 23. Majority of the respondents were females (56.7%) as against males (43.3%). The total score for all burnout variables among health worker groups ranged from good (71.50%), alarming (12.60%), acute crisis (6.02%), and burnout (9.90%). Among the health worker groups, nurses had the highest percentage score values for all burnout variables. There was an association between burnout and these sociodemographic characteristics: age (p<0.001), gender (p=0.003), educational qualification (p<0.001), occupation (p<0.001), years of work experience (p<0.001), marital status (p<0.001), and parenthood (having children) (p<0.001). It is recommended that measures should be put in place in Ghanaian hospitals to assess stress and burnout levels to ensure people who are going through such situations are properly cared and supported.

Heat exposure studies over the last decade have shown little attention in assessing and reporting the psychometric properties of the various scales used to measure impacts of occupational heat stress on workers. A descriptive cross-sectional survey including 320 small- and large-scale mining workers was employed to assess the construct validity of the social impacts of occupational heat stress scale (SIOHSS) in the Western Region of Ghana in 2017. A confirmatory factor analysis (CFA) and invariance analysis were carried out using AMOS version 25 and statistical product and service solutions (SPSS) version 26 to examine the model fit and establish consistency correspondingly across multiple groups (gender, age, working hours, type of mining and workplace setting). Empirically, our results depicted that effects on health and safety, behavioural, productivity and social well-being were each found to be reliable, with Cronbach's α of 0.722, 0.807, 0.852 and 0.900 respectively. Though there were issues of insufficient discriminant validity as some average variance extract (AVE) were smaller than the corresponding maximum shared variance (MSV), the CFA showed good model fit indices (CFI = 0.856, GFI = 0.890, TLI = 0.863, SRMR = 0.08, RMSEA = 0.08). Also, the model was variant for all constrained aspects of the structural model indicating a requirement for an adaptation of the instrument across groups. The good to moderate internal consistency and construct validity of the SIOHSS is adequate evidence for the confidence required for its reliability and accuracy in measuring the social impacts of occupational heat stress on workers.

Adequate information is sparse for many tropical timbers on their engineering applications, which make their international promotion difficult. The physical and mechanical properties of Klainedoxa gabonensis Pierre ex Engl. (a lesser-utilized species) and Entandrophragma cylindricum were compared. K. gabonensis contained more moisture with greater density at 12 % moisture content than E. cylindricum and had a tangential–radial ratio for swelling and shrinkage of 1.31–1.38 and 1.58–1.63, respectively, within acceptable thresholds for engineering/structural timbers. For K. gabonensis, shear parallel to grain was 32.2 ± 0.4–33.5 ± 1 N mm−2; compressive parallel to grain, 80.7 ± 1.4–90.6 ± 1 N mm−2; modulus of rupture, 204 ± 4.0–214 ± 4.0 N mm−2 and modulus of elasticity, 28,932 ± 664–29,493 ± 822 N mm−2. These properties were superior to those of E. cylindricum [(15.5 ± 0.9)–(15.6 ± 0.6), (56.4 ± 4.5)–(63.6 ± 1.2), (99.4 ± 4.7)–(121.3 ± 10.6), and (9987.4 ± 207)–(10,051 ± 258) N mm−2, respectively] and compared well with those of several traditional timbers for construction and furniture production. Its use would contribute to minimize pressure on the primary timbers in the forests and widen the raw material base for wooden products.

Branchwood is being exploited as a supplement to stemwood in wood products manufacturing, and the wood’s bending strength properties are vital for structural and non-structural applications. Non-destructive methods are being adopted in determining wood properties, and wood density and moisture content are two variables that could be useful. This study assessed the influence of density and moisture content (MC) on the Modulus of Elasticity (MOE) and Modulus of Rupture (MOR) of branch and stem woods of Entandrophragma cylindricum (sapele) tested at two moisture levels (10 ± 4% MC and 17 ± 3% MC). Density was determined in accordance with ISO 3131. To determine bending strength properties, BS 373 was followed, using an INSTRON TCM Machine with a crosshead speed of 6.6 mm per minute. Results indicated that branchwood has higher density than its stemwood counterparts. MOE and MOR of both wood types were significantly higher at 10 ± 4% MC than their counterparts at 17 ± 3% MC. Differences in MOE and MOR...

Environmental health hazards faced by farmers, such as exposure to extreme heat stress, are a growing concern due to global climate change, particularly in tropical developing countries. In such environments, farmers are considered to be a population at risk of environmental heat exposure. The situation is exacerbated due to their farming methods that involve the use of primitive equipment and hard manual labour conducted in full sunshine under hot and humid conditions. However, there is inadequate information about the extent of heat exposure to such farmers, both at the household and farm levels. This paper presents results from a study assessing environmental heat exposure on rural smallholder farmers in Bawku East, Northern Ghana. From January to December 2013, Lascar USB temperature and humidity sensors and a calibrated Questemp heat stress monitor were deployed to farms and homes of rural farmers at Pusiga in Bawku East to capture farmers' exposure to heat stress in both their living and working environments as they executed regular farming routines. The Lascar sensors have the capability to frequently, accurately and securely measure temperature and humidity over long periods. The Questemp heat stress monitor was placed in the same vicinity and showed strong correlations to Lascar sensors in terms of derived values of wet-bulb globe temperature (WBGT). The WBGT in the working environment of farmers peaked at 33.0 to 38.1 °C during the middle of the day in the rainy season from March to October and dropped to 14.0-23.7 °C in the early morning during this season. A maximum hourly WBGT of 28.9-37.5 °C (March-October) was recorded in the living environment of farmers, demonstrating little relief from heat exposure during the day. With these levels of heat stress, exposed farmers conducting physically demanding outdoor work risk suffering serious health consequences. The sustainability of manual farming practices is also under threat by such high levels of heat exposure.

In the wake of dwindling timber resources in Ghana, the establishment of plantations has become necessary and the government and industry are actively pursuing this course. Plantations of Khaya ivorensis, which is one of the most valuable wood species, have been established in Ghana. However, concerns have been expressed by industry and stakeholders about the properties of fast-grown plantation trees compared to natural tree stands. It is believed that plantation grown species have relatively inferior wood quality to the trees from the natural stands. Wood properties such as bending strength and stiffness need to be determined to effectively recommend specific end use for the species. The aim of the study was to determine the modulus of rupture (MOR) and modulus of elasticity (MOE) of plantation-grown K. ivorensis and compare with the trees from natural stands. Plantation trees had higher strength values with a characteristic MOR of 67.35 N/mm2 compared to natural trees with a characteristic MOR of 55.27 N/mm2. Results indicated that the properties of plantation trees were not inferior to the trees from the natural forest, and even had relatively higher strength properties. Mahogany plantations are therefore recommended to ensure the sustainable supply of the species to the wood industry.

Interest in branchwood utilization is gradually increasing on account of increasing demand for wood for construction and furniture production. However, wood quality assessment involves consideration of physical, mechanical and anatomical characteristics. This present study compared density, MOE and MOR, and compressive strength at 17 ± 3 %MC and 10 ± 4 %MC and some anatomical characteristics of Khaya ivorensis and Entandrophragma cylindricum by following BS (British Standard) 373, Strength properties of timber 1–24, 1957; ISO (International Standard) 3131, International Standard; wood-determination of density for physical and mechanical tests, 1975) and IAWA committee protocol of 1989. Branchwood and stemwood samples were extracted from two natural forest reserves. Results indicated that branchwood of the species dried to 17 %MC and 10 %MC proved to be as good materials as their stemwood counterparts in terms of bending and compressive strength parallel to the grain. Branchwood had significantly (p

Heavy physical workload for long hours coupled with increasing workplace heat exposure due to rising temperatures stemming from climate change, especially where there are inadequate prevention and control policies, adversely affect workers' health and safety, productive capacity and social well-being. However, variations in workers' concerns and awareness of occupational heat stress and climate change risks impede the effectiveness of heat stress management. A mixed method approach was used to assess climate change perceptions and occupational heat stress risks and adaptation strategies of Ghanaian mining workers. Questionnaires and focus group discussions were used to collect data from 320 respondents. Quantitative and qualitative approaches were used for data analysis. Workers' climate change risk perception, as confirmed by trends in climate data, was reasonable, but concerns about climate change effects and workplace heat exposure risks varied significantly across types of mining activity (p 0.001). Workers experienced heat-related morbidities, but the variation in heat-related morbidity experiences across the type of mining activity was not significant. However, the type of heat-related morbidities experienced by workers differed across the type of mining activity (p 0.001). Workers' awareness of occupational heat stress prevention and control was adequate. The disparities in workers' awareness and use of the prevention and control measures significantly differed across the type of mining activity (p 0.001). Occupational heat stress prevention activities should focus on workers, and a concerted effort must be made to promote workers' adaptive capacity and inform policy decisions.

Increasing air temperatures as a result of climate change are worsening the impact of heat exposure on working populations, including mining workers, who are at risk of suffering heat-related illnesses, injury and death. However, inadequate awareness of climate change-related occupational heat stress risks and adaptation strategies have been shown to render occupational heat stress management ineffective. A concurrent mixed-methods approach was used to assess the perceptions of climate change and occupational heat stress risks and adaptation strategies of mining workers among supervisory personnel and other stakeholders in Ghana. Questionnaires and interviews were used to elicit data from 19 respondents. Data were processed and interpreted using descriptive statistics, chi-square and Fisher's exact tests, and thematic analysis. Supervisors' climate change risks perception was adequate, and their concern about workplace heat exposure risks was moderate. Mining workers' occupational heat stress risks experiences were linked to heat-related illness and minor injuries. Mining workers' adaptation strategies included water intake, use of cooling mechanisms, work-break practices, and clothing use. The related differences in job experience in the distribution of climate change risk perception and occupational heat stress risk experiences, and the difference in educational attainment in the distribution of adaptation strategies of occupational heat stress were significant (p 0.05). Hence, an effective workplace heat management policy requires adequate understanding of occupational heat stress risks and adaptation policies and continued education and training for mining workers.

Smallholder farming has become a significant livelihood coping strategy of the population in Ghana. However, in the last decade the upsurge of climate change and the effect of heat stress vulnerability on smallholder farmers in Northern Ghana are alarming. This article investigates the chances of using social protection and climate change adaptation policies towards the management of risks associated with heat stress emanating from climate change. It reviews salient literature on heat stress, social protection, and climate change policies and develops a model upon which both domestic and international interest in climate and social protection policies of Ghana and Sub-Sahara Africa can reduce or aggravate heat stress impacts on smallholder farmers both at their working environment and at household level. It exemplifies the efficacy of the strength of social protection and climate change adaptation policies in Ghana and its impacts on vulnerable rural smallholder farmers and how such situation is replicated in many parts of Africa. It outlines further measures that can be undertaken by governments and international donor agencies to revamp the destitution of smallholder farmers to climate change and heat stress in African region.