Search

To accurately evaluate the health risk of consumers from the combined effects of substances in multiple used household products, data on co-use and multiple-use habits and practices of consumers necessarily constitute a fundamental element of the exposure assessment process. To understand the current combined use pattern of household products, reliable combined exposure data were investigated. Eleven household product categories were selected and divided by 40 product use purposes. This approach analyzed the information of single-use, co-use, and multiple-use patterns of the 11 products at home collected from 6,397 respondents. All possible multiple combinations of products and product usage categories were analyzed. As expected, the participants used several products and product usage categories simultaneously. The data yielded important personalized combined exposure patterns that can be used in exposure assessment for hazardous substances that are used as ingredients of products. Furthermore, this study investigated the combined exposure amount of 11 products to user at home. Aggregate exposure amount per month to user was calculated to be 7479.6 g/month (six products in 1st survey) and 4056 g/month (five products in 2nd survey). This study provides valuable information on the individual use patterns and circumstances of household product use by consumers. Key words: Web-survey, combined exposure, household products, multiple-use patterns, combined exposure amount.

Mass distribution of mercury (Hg) and estimation of recoverable Hg amount from primary metal production facilities (zinc, lead and copper) were investigated. According to UNEP Toolkit Level 2 for figuring out the contribution of Hg release from major source categories, the primary metal production industry was estimated as a main Hg source among whole industries in South Korea, which was accounted as a half of the total inflow and the amount was 178 ton-Hg/year. Four kinds of domestic primary metal production facilities (zinc, zinc and lead and copper smelters) were selected for conducting on-site measurements for mass distribution analysis of Hg. The total amount of Hg released into different phase media was estimated only as 20.68 ton-Hg/year on average. The highest share of Hg released was from zinc and lead production facilities as the same as seen in UNEP toolkit. However, the difference in the release amount of Hg between UNEP Toolkit and on-site measurement was found from large differences of Hg content data in input raw materials. Also, 18.21 ton-Hg/year was released as solid-phase byproducts such as wastewater sludge and slag, which are recoverable. The amount of Hg recoverable from zinc and lead production facility was estimated as 16.0 ton-Hg/year on average.

The origin of PM2.5 has long been the subject of debate and stable isotopic tools have been applied to decipher. In this study, weekly PM2.5 samples were simultaneously collected at an urban (Seoul) and rural (Baengnyeong Island) site in Korea from January 2014 through February 2016. The seasonal variation of isotopic species showed significant seasonal differences with sinusoidal variation. The isotopic results implied that isotope species from Baengnyeong were mostly originated from coal combustion during China's winter heating seasons, whereas in summer, the isotopic patterns observed that were more likely to be from marine. In Seoul, coal combustion related isotopic patterns increased during China's winter heating period while vehicle related isotopic patterns were dominated whole seasons by default. Therefore, aerosol formation was originated from long-range transported coal combustion-related NOx by vehicle-related NH3 in Seoul. δN-NH4+ in Seoul showed highly enriched 15N compositions in all seasons, indicating that NH3 from vehicle emission is the important source of NH4+ in PM2.5 in Seoul. In addition, Baengnyeong should be consistently considered as a key region for observing the changes of isotopic features depend on the contribution of individual emissions to the atmospheric as a result of the reduction of coal consumption in China.

It is thought that there are many unregulated anthropogenic chemicals in the environment. For risk assessment of chemicals, it is essential to estimate the predicted environmental concentrations. As an effort of identifying residual organic contaminants in air and water in Korea, nontarget screening using two-dimensional gas chromatography time-of-flight mass spectrometry (GC×GC-TOFMS) was conducted at 10 sites using polyurethane foam passive air sampler and at 6 sites using polydimethyl siloxane (PDMS) passive water sampler in three different seasons in 2014. More than 600 chemical peaks were identified satisfying the identification criteria in air and water samples, respectively, providing a list for further investigation. Chemical substances with reported national emission rates in 2014 (n=149) were also screened for potential existence in the environment using a level II fugacity model. Most of chemical substances classified as not detectable were not identified with detection frequency greater than 20% by nontarget screening, indicating that a simple equilibrium model has a strong potential to be used to exclude chemicals that are not likely to remain in the environment after emissions from targeted monitoring.

The mercury (Hg) distribution characteristics were investigated in three primary manganese smelting plants in Korea for the assessment of anthropogenic Hg released. Input and output materials were sampled from each process, and Hg concentrations in the samples were analyzed. Among the input materials, the most mercury was found in the manganese ore (83.1–99.7%) and mercury was mainly released through fly ash or off gas, depending on the condition of off gas cleaning system. As off gas temperature decreases, proportion and concentration of emitted gaseous elemental mercury (Hg0) in off gas decreases. Based on mass balance study from these three plants and national manganese production data, the total amount of mercury released from those Korean plants was estimated to 644 kg/yr. About half of it was emitted into the air while the rest was released to waste as fly ash. With the results of this investigation, national inventory for Hg emission and release could be updated for the response to Minamata Convention on Mercury.

The potential of diffusive gradient in thin film (DGT) as a long-term monitoring tool to assess trace level mercury (Hg) in surface waters was evaluated. A piston type DGT sampler and a plate-type device that could hold 15 DGTs were designed. The device contained piston type DGT samplers with varying diffusive gel thicknesses, that is, 0.5, 0.75, and 1.0 mm, respectively. Three DGT devices were deployed in a lake for 5 weeks, and two were deployed in a stream for 3 weeks. In the lake, the total Hg (THg) mass accumulated in the DGT varied between 0.05 and 0.15 ng, which increased with an increase in deployment time and decreased with an increase in agarose diffusion gel thickness. The DGT concentration in the lake water for a 2 week period was estimated to be about 0.8–1.0 ng/L, which was close to the measured value of 1.1 (± 0.13) ng/L, using the grab sampling technique. However, the DGT estimated at 4 and 6 weeks showed a concentration of about 0.5–0.7 ng/L, which is about twice as small as that measured by grab sampling. This underestimation of the THg levels in water appear to be caused by additional thicknesses of the physical diffusive boundary layer (0.15, 0.5, 1.29 mm) and biofilm, outside the DGT filter. The predicted DGT concentration in the upper stream of the Nakdong River was estimated to be about 0.8–1.4 ng/L, which is similar to the value of 1.22 (± 0.29) ng/L measured in the field by grab sampling. The concentration of THg was estimated to be about 1.0–1.2 ng/L, which is similar to the values measured by grab sampling. The additional diffusion thickness formed outside the DGT filter was 0.018 mm and 0.093 mm at 1 and 3 weeks, respectively, which is not larger than the diffusion gel thickness (0.5–1.0 mm). This was because DGT was installed in a region where the flow velocity is high, and the thickness of the diffusion boundary layer outside the filter is negligible.

Public concern regarding the use of products with chemicals has increased in Korea, following reports indicating that hazardous chemicals in products, such as disinfectants, can cause fatal lung disease. Despite the widespread use of car colorant products, little is known regarding their potential health risks. The purpose of this study was to determine the potential health risks of substances that exist in car colorant products. Thirteen car colorant products were purchased from the Korean market and 15 commonly used chemicals were analyzed. Exposure and risk assessments were conducted in two assessment stages (screening and refined). The analysis showed that all of the examined products contained toluene, ethylbenzene, and xylene. The maximum concentration of toluene was 52.5%, with a median concentration of 10.8%. Tier 1 (screening) assessment showed that four chemicals (toluene, ethylbenzene, xylene, and 2-butoxyethanol) may pose health risks, but tier 2 (refined) assessment showed that these chemicals do not pose any risk. However, these chemicals were present in all of the examined products, and government regulations did not control their concentrations in these products. Therefore, we suggest that levels of toluene, ethylbenzene, and xylene in car colorant products should be regulated to protect public health.

Understanding how indoor-air contaminants affect human health is of critical importance in our developed society. We assessed the combined exposure by inhalation of preschool children and children to household products. A total of 1175 families with 72 infants, 158 toddlers, 230 children, and 239 youths were surveyed to determine the combined respiratory exposure concentrations and amounts associated with 21 substances in eight household product groups. We determined the mean concentrations of these substances in each product, and derived reference toxicity values based on the information gathered in order to identify respiratory health risks. On average, cleaners were used at a rate of 1.0 &times, 103 g/month, while coating agents and other substances were used at 43 g/month. The combined inhalation exposure concentrations of methanol to infants and toddlers were 5.1 and 4.2 mg/m3 per month, respectively, with values of 2.1 and 1.7 mg/m3 for isopropanol, respectively. Risks to preschool children and children should be assessed on the basis of the toxicity values of combined exposed hazardous substances, as well as their combined concentrations and amounts. This exposure assessment approach can be used to establish improved guidelines for products that may pose inhalation hazards to preschool children and children.

A nationwide emission estimate of perfluoroalkyl substances (PFASs) from wastewater treatment plants (WWTPs) is required to understand the source-receptor relationship of PFASs and to manage major types of WWTPs. In this study, the concentrations of 13 PFASs (8 perfluorocarboxylic acids, 3 perfluoroalkane sulfonates, and 2 intermediates) in wastewater and sludge from 81 WWTPs in South Korea were collected. The emission pathways of PFASs were redefined, and then the national emission of PFASs from WWTPs was rigorously updated. In addition to the direct calculations, Monte Carlo simulations were also used to calculate the likely range of PFAS emissions. The total (Σ13PFAS) emission (wastewater + sludge) calculated from the direct calculation with mean concentrations was 4.03 ton/y. The emissions of perfluorooctanoic acid (PFOA, 1.19 ton/y) and perfluorooctane sulfonate (PFOS, 1.01 ton/y) were dominant. The Monte Carlo simulations suggested that the realistic national emission of Σ13PFASs is between 2 ton/y and 20 ton/y. Combined WWTPs treating municipal wastewater from residential and commercial areas were identified as a major emission source, contributing 65% to the total PFAS emissions. The Han and Nakdong Rivers were the primary contaminated rivers, receiving 89% of the total PFAS discharge from WWTPs. The results and methodologies in this study can be useful to establish a management policy for PFASs.

Levels of 11 perfluoroalkyl acids (PFAAs), including perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), were measured in wastewater (influent and effluent) and sludge samples collected from 25 industrial wastewater treatment plants (I-WWTPs) in five industrial sectors (chemicals, electronics, metals, paper, and textiles) in South Korea. The highest ∑11PFAAs concentrations were detected in the influent and effluent from the paper (median: 411ng/L) and textile (median: 106ng/L) industries, and PFOA and PFOS were the predominant PFAAs (49-66%) in wastewater. Exceptionally high levels of PFAAs were detected in the sludge associated with the electronics (median: 91.0ng/g) and chemical (median: 81.5ng/g) industries with PFOS being the predominant PFAA. The discharge loads of 11 PFAAs from I-WWTP were calculated that total discharge loads for the five industries were 0.146ton/yr. The textile industry had the highest discharge load with 0.055ton/yr (PFOA: 0.039ton/yr, PFOS: 0.010ton/yr). Municipal wastewater contributed more to the overall discharge of PFAAs (0.489ton/yr) due to the very small industrial wastewater discharge compared to municipal wastewater discharge, but the contribution of PFAAs from I-WWTPs cannot be ignored.

Exposure assessment, a fundamental element of the risk assessment process, is the estimation of what consumers may be exposed to by using household products. Reliable exposure factors were investigated to understand the pattern of household products usage. Six household product categories were selected and divided by application types. Two surveys were carried out and 6397 participants completed the web-based questionnaires, and laboratory evaluations were also conducted to measure the actual level of exposure (g/use). We focused more on inhalation exposure from products (and/or their application types) that affect indoor air such as diffusible types. To estimate actual exposure amounts, the time spent to apply the products was investigated from the beginning to end of the product use. For spraying type products, the consumer could be exposed to the maximum amount of used product while using the triggering action and pressing the button on the aerosol spray product, and during cleaning, adhesion, and coating target, consumer could be exposed continuously. For diffuser type products, exposure duration was the time for which consumers were exposed to the diffused product. The exposure amount for trigger and aerosol spray type products were measured using the time taken to trigger or spray the product and the mass generated from the same. This study provides valuable information on the individual exposure factors that may be useful to conduct accurate exposure assessments and to manage household products.

The widespread emergence of antibiotic resistant microorganisms in clinics and natural environments has attracted public concern. Especially, microorganisms inhabiting natural environment is considered as a source responsible for increasing the abundance of antibiotic resistant genes in ecosystem. In this study, the diversity of culturable bacteria resistant to ampicillin was investigated with water samples collected from seven locations in Korea. The genera belonging to Aeromonas and Acidovorax were dominant among the isolated 498 strains. The 66% of isolates showed multi-drug resistance against more than six antibiotics among tested fourteen ones and isolates resistant to seven antibiotics were the most prevalent with 19.7% abundance. Using the antibiotics susceptibility results, the intrinsic resistance profile was suggested for the most dominant genera, Aeromonas, Acidovorax, Pseudomonas, and Elizabethkingia.

Mercury (Hg) concentrations in air, effluent water, landfill gas, leachate, groundwater, and soil at a hazardous solid waste landfill site in Korea were measured along with air–soil surface Hg exchange fluxes at the site. The concentrations and fluxes were considerably higher than have been found elsewhere in Korea. Gaseous Hg concentrations in the air peaked during the day, coinciding with Hg being released from the landfill surface. This suggests that air–soil exchange increased the Hg concentrations in the atmosphere. The air–soil exchange flux increased abruptly when solar radiation reached the soil surface. The Hg flux peaked about 3 h before the solar radiation peaked, possibly because reducible Hg was abundant at the soil surface. The Hg emission flux activation energy (E a) was low, indicating that the Hg species present and Hg–soil binding were probably not as important (because of the high Hg content of the soil) as in previous studies. The methylmercury to total Hg ratios in the discharged effluent, groundwater, and leachate was clearly higher than typically found in coastal water and freshwater, suggesting bacteria caused active methylation to occur under the reducing conditions in the anaerobic landfill. The results suggested that considerable amounts of Hg are probably transported from the landfill to nearby environmental media and that this will continue if waste with a high Hg content continues to be added to the landfill without being pretreated.

The origin of PM

Antibiotics in the aquatic environment are dispersed through anthropogenic activities at low concentrations. Despite their sub lethal concentration, these biologically active compounds may still have adverse effects to non-target species. This study examined the response of adult zebrafish to 0.1mg/L concentration of clarithromycin, florfenicol, sulfamethazine, and their mixture using environmental metabolomics. Embryo and larvae of the fish were also used to assess fish embryo acute toxicity and behavior tests respectively. The fish embryo toxicity test did not show any inhibition of growth and development of the embryos after 96h of exposure to the antibiotics. Changes in swimming activity were seen in 5-dpf larvae which is believed to be correlated with the length of exposure to the compounds. Meanwhile, environmental metabolomics revealed diverse metabolites and pathways that were affected after 72h of exposure of the adult fish to sub-lethal concentration of the compounds. We found that even at low concentration of the antibiotics, behavioral and metabolic effects were still observed despite the lack of visible morphological changes. Further studies involving other aquatic organisms and bioactive compounds are encouraged to strengthen the findings presented in this novel research.

This study was conducted to build up the inventories of Pb isotopic compositions of major Pb pollution sources in South Korea. Since non-ferrous metal smelters are one of major anthropogenic sources, two smelters for zinc, each one of smelter for lead and copper were selected for the study. The Pb concentrations and isotopic compositions of metal ores, wastewater, sludge, metal rod and produced sulfuric acid were analysed to understand the Pb isotopic patterns in environment. The isotopic ratio, , of zinc ores from zinc smelter were in the range of 1.179~1.198 and the ratio of waste, flue gas and products samples were 1.105~1.147. This results implied that the isotopic patterns of output samples showed mixing patterns between two distinct metal ore soerces. In 2011, major importing countries of zinc ore were Australia, Peru and Mexico. Thus Pb isotopic patterns from zinc smelter is originated from the mixing patterns between less radiogenic Australian ores and more radiogenic South America`s ores. Lead smelters also showed the same mixing patterns with those of zinc smelters. However copper smelter showed same Pb isotopic patterns with more radiogenic South America`s ores.

Data are presented for 11 organochlorine pesticides (OCPs) measured by high volume air samplers at three background sites (monthly for one site, seasonally for two sites) in South Korea during June 2008 and December 2009, and levels, seasonal variations and potential sources of high levels of OCPs and impact of long-range transport (LRT) were discussed. Geometric mean (GM) concentrations of OCPs in air samples (pg m−3) were highest for HCB (80, 15.0–256), HCH (71, 10.8–547), a currently used pesticide, DDT (3.50, ND-56.5), and Chlordane (1.15, ND-10.5). Other chemicals regularly detected included, Heptachlor (0.41, ND-2.59), Drins (0.61, ND-4.36) and Mirex (0.04, ND-0.78). Seasonal variation of OCPs was featured by higher concentrations in summer and lower in winter period. This could be associated with their temperature-driven re-volatilization from historical source and recent application of some OCPs (such as dicofol, HCH etc). Ratios of specific OCPs isomers suggest that dominant source of air HCHs in Korea background sites is technical HCH with a little input of lindane in recent time, and dominant source of air DDT is old and used technical DDT with a little bit of dicofol type DDT, and current air chlordane in Korean background sites mainly come from the source of historically used chlordane. The results from this study will provide comparable and scientifically sound data of OCP in background air and will contribute to further long-term POPs monitoring program in East Asia.

The objective of this study was to identify Pb pollution sources of sediments in Lake Andong. We analysed Pb isotopes in sediments from Lake Andong, soils and mining tails from the watershed as well as sludges and wastewater from zinc smelting facilities which exists in upper stream of Lake Andong. The Pb isotope ratios ( 207 Pb/ 206 Pb and 208 Pb/ 206 Pb) for sediments are 0.827±0.004 and 2.041±0.015, which showed similar values with those of mining tails, 0.815±0.002 and 2.016±0.006, respectively. The isotopic ratio values of soils existed in the range of 0.756~0.881 and 1.872~2.187. In imported zinc ores, the isotopic ratio values existed in the range of 0.816~0.956 (mean 0.832) and 2.029~2.219 (mean 2.059). These values were similar to those in zinc and lead concentrate originated from Canada and South America. Additionally, isotopic ratio values for sludge and wastewater were 17.515±0.155, 15.537±0.018, and 37.357±0.173, respectively. The Pb isotopic ratio of sediments showed binary combination patterns with soil and mining tails, which were similar to those for Korean Pb ore.

Recently, environmental metabolomics has been introduced as a next generation environmental toxicity method which helps in evaluating toxicity of bioactive compounds to non-target organisms. In general, efficient metabolite extraction from target cells is one of the keys to success to better understand the effects of toxic substances to organisms. In this regard, the aim of this study is (1) to compare two sample extraction methods in terms of abundance and quality of metabolites and (2) investigate how this could lead to difference in data interpretation using pathway analysis. For this purpose, the antibiotic sulfamethazine and zebrafish (Danio rerio) were selected as model toxic substance and target organism, respectively. The zebrafish was exposed to four different sulfamethazine concentrations (0, 10, 30, and 50mg/L) for 72h. Metabolites were extracted using two different methods (Bligh and Dyer and solid-phase extraction). A total of 13,538 and 12,469 features were detected using quadrupole time-of-flight liquid chromatography mass spectrometry (QTOF LC-MS). Of these metabolites, 4278 (Bligh and Dyer) and 332 (solid phase extraction) were found to be significant after false discovery rate adjustment at a significance threshold of 0.01. Metlin and KEGG pathway analysis showed comprehensive information from fish samples extracted using Bligh and Dyer compared to solid phase extraction. This study shows that proper selection of sample extraction method is critically important for interpreting and analyzing the toxicity data of organisms when metabolomics is applied.

Emission characteristics of particulate matter and heavy metals from 12 small waste incinerators, whose capacity ranged from 25 to 200 kg/h of waste, were investigated to determine the factors affecting the particulate matter generation and growth mechanisms. The ratio of fine particles to coarse particles increased with the flue gas temperature. Particulate matter showed bimodal forms in particle size distributions. The finer particle mode in particle size distribution shifted toward the coarser particle mode with a decrease in flue gas temperature. Experimental results were in agreement with coagulation theory: It is thought that the coarser particles were mechanically generated and the finer particles were generated by gas-to-particle conversion mechanisms such as nucleation, condensation, and coagulation. Heavy metal enrichment in finer particulate matter was also observed and related to particle formation and growth from vaporized metals. Emission of all heavy metals except zinc was affected by hydrogen chloride concentrations, while some metal emissions such as manganese, chromium, and copper were not varied with flue gas temperature.

The characteristics of particulate matter (PM) emission such as the estimation of emission factors, size distributions and of heavy metal emission from small-size incinerators and boilers have been investigated. In PM-10 emission, a fine mode was found in the formation of sub-micron PM by growth of nucleated aerosol of metal vapor, having a bimodal particle size distribution in overall size range. The emission ratios of PM-10 to TPM (total PM) from boilers and incinerators ranged from 29% to 62% and 10% to 84%, respectively, which resulted in more and larger sized PM emission due to poorer combustion from solid waste incinerators than boilers. The targeted metals were copper, cadmium, manganese, chromium, magnesium, lead, zinc and copper, and their contents in bottom ash, fly ash and dust (PM) were compared. More volatile metals such as cadmium, lead and zinc showed higher enrichment in PM emitted through stack than bottom ashes. Cadmium, copper, lead and zinc on the fine PM under 2.5 μm accounted for approximately 90% of the total mass of each metal in PM-10. The effects of chlorine concentration and temperature on such metals emission were also observed due to their volatility changes.

The objective of this study was to evaluate stable Pb isotope signatures as a tracer for Pb contamination in Lake Andong. For Pb isotope analysis, we collected water and sediment from Lake Andong, particles in the air, soils, and stream water, mine tailings, sludge and wastewater from zinc smelting around lake Andong watershed. The results showed that Pb isotope ratios ( 206 Pb/ 204 Pb, 207 Pb/ 204 Pb, and 208 Pb/ 204 Pb) for zinc concentrate were 18.809 ± 0.322, 15.650 ± 0.062, and 38.728 ± 0.421, respectively. In wastewater, isotopic ratio values ( 206 Pb/ 204 Pb, 207 Pb/ 204 Pb, and 208 Pb/ 204 Pb) were 17.363 ± 0.133, 15.550 ± 0.025, and 37.217 ± 0.092, respectively. Additionally, isotopic ratio values ( 206 Pb/ 204 Pb, 207 Pb/ 204 Pb, and 208 Pb/ 204 Pb) for sludge were 17.515 ± 0.155, 15.537 ± 0.018, and 37.357 ± 0.173, respectively. These values were similar to those in zinc and lead concentrate originated from Canada and South America. In contrast, Pb isotope ratios of soil, tailings and sediment from Lake Andong were similar to those of Korean ore. Atmospheric particles showed different patterns of Pb isotope ratios from sediments, soils, and zinc smelting and this needs further investigation in order to identify atmospheric Pb sources.

This study was performed to suggest the improvements through measuring the amounts of polychlorinated dibenzo- p -dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), re-synthesized in peripheral utilities (PUs) of a commercial-scale municipal solid waste incineration facility (MSWIF) where a few research results existed. The PUs examined in this study consisted of air pre-heaters (APHs) and gas/gas re-heater (GGRH) and kerosene-fired duct burner for selective catalytic reduction (SCR) process. PCDDs/PCDFs in flue gas were simultaneously measured at the inlet and outlet of PUs. Flue gas was cooled down from 380 °C to 249 °C by exchanging the heat with fresh air in APHs, and then heated up to 383 °C by GGRH and duct burner from 164 °C at the outlet of bag filter. The results showed that PCDDs/PCDFs were 3–4 times higher within this temperature range of PUs. In comparison of PCDDs/PCDFs concentrations at the inlet with those at the outlet of PUs, particulate-phase PCDDs/PCDFs were about 9.5–10 times enriched while gaseous-phase ones were decreased by about 33–41%. The PCDDs/PCDFs re-synthesized in the PUs, where PCDDs were relatively higher than PCDFs, showed somewhat different patterns compared to those formed at incinerators and emitted at stack. Through the investigations for PUs, we conclude that the PUs used in MSWIFs was a potential source for de novo synthesis of PCDDs/PCDFs.

This study is intended to develop the emission factors of particulate matter such as TPM (total particulate matter), PM-10 (particulate matter less than 10 micrometers in aerodynamic diameter), PM-2.5 (particulate matter less than 2.5 micrometers in aerodynamic diameters) and several types of inorganic matter from small-size incinerators (less than 250 kg hr(-1) capacity) and boilers (less than 5 ton hr(-1) capacity a s steam generation) for various compositions of wastes and fuels, respectively.The emission factors for particulate matter from boilers were similar to the US EPA data. However, the emission factors from small incinerators were higher than the emission factors developed in other countries because the emission characteristics were different, especially with respect to the combustor's capacity. Emission factors for heavy metals such as cadmium, manganese, chromium, magnesium, lead, zinc, and copper were also investigated. The emission factors in this study were higher than those in other studies. Particle size distribution of PM-10 and the ratio of submicron PM to TPM were observed and a mode (peak) of submicron size particles together with a higher concentration of them was found, which could be explained by the formation of fines from vaporized metals wastes.