Search

Abstract In this research, we investigated whether secondhand smoking (SHS) increases the possibility of hypertension. We used data from the Shaanxi baseline survey of the Regional Ethnic Cohort Study in Northwest China (RECS). Active smoking and SHS were determined by questionnaires. Hypertension was defined as self-reported or objectively measured. Multivariable logistic regression model was performed to estimate the risk of hypertension under active smoking and SHS. Compared to never-smokers, exposure to SHS had a 9% (P = 0.005) higher possibility of hypertension. The adjusted OR for exposure time of ≤ 3 h/week, 3–12 h/week, and > 12 h/week were 1.03 (P = 0.545), 1.10 ( P = 0.040), and 1.15 (P = 0.015), respectively. The adjusted OR for frequency of SHS of 1–2 times/week, 3–5 times/week, and nearly every day were 0.94 (P = 0.421), 1.01 (P = 0.846), and 1.14 (P

Ion cyclotron resonance heating (ICRH) is an important auxiliary heating method applied to the China Fusion Engineering Test Reactor, which can effectively heat the ions and electrons in plasma. Owing to the harsh nuclear environment, neutronic analyses are required to verify tritium self-sufficiency and neutron-shielding requirements. In this study, a neutronics analysis of the ICRH antenna was conducted using the COre and System integrated engine for Reactor Monte Carlo (cosRMC) code to estimate the neutron flux, radiation damage, nuclear heating, gas generation rate of key components, and tritium breeding ratio (TBR), providing data support for the subsequent optimization of the shielding design. In addition, the neutron flux of the coils around the antenna was calculated to prevent the entry of neutrons that damage the magnetic field coils through the gaps between the port plugs and antenna, and the shielding effects of the port-plug antenna on the surrounding components were analyzed. Finally, the results obtained using the cosRMC and MCNP codes were compared, which and presented good agreement, thus verifying the reliability of the neutronic analysis using the cosRMC code.

Abstract To improve locomotion and operation integration, this paper presents an integrated leg-arm quadruped robot (ILQR) that has a reconfigurable joint. First, the reconfigurable joint is designed and assembled at the end of the leg-arm chain. When the robot performs a task, reconfigurable configuration and mode switching can be achieved using this joint. In contrast from traditional quadruped robots, this robot can stack in a designated area to optimize the occupied volume in a nonworking state. Kinematics modeling and dynamics modeling are established to evaluate the mechanical properties for multiple modes. All working modes of the robot are classified, which can be defined as deployable mode, locomotion mode and operation mode. Based on the stability margin and mechanical modeling, switching analysis and evaluation between each mode is carried out. Finally, the prototype experimental results verify the function realization and switching stability of multimode and provide a design method to integrate and perform multimode for quadruped robots with deployable characteristics.

Abstract Background In the context of increasing exposure to silica nanoparticles (SiNPs) and ensuing respiratory health risks, emerging evidence has suggested that SiNPs can cause a series of pathological lung injuries, including fibrotic lesions. However, the underlying mediators in the lung fibrogenesis caused by SiNPs have not yet been elucidated. Results The in vivo investigation verified that long-term inhalation exposure to SiNPs induced fibroblast activation and collagen deposition in the rat lungs. In vitro, the uptake of exosomes derived from SiNPs-stimulated lung epithelial cells (BEAS-2B) by fibroblasts (MRC-5) enhanced its proliferation, adhesion, and activation. In particular, the mechanistic investigation revealed SiNPs stimulated an increase of epithelium-secreted exosomal miR-494-3p and thereby disrupted the TGF-β/BMPR2/Smad pathway in fibroblasts via targeting bone morphogenetic protein receptor 2 (BMPR2), ultimately resulting in fibroblast activation and collagen deposition. Conversely, the inhibitor of exosomes, GW4869, can abolish the induction of upregulated miR-494-3p and fibroblast activation in MRC-5 cells by the SiNPs-treated supernatants of BEAS-2B. Besides, inhibiting miR-494-3p or overexpression of BMPR2 could ameliorate fibroblast activation by interfering with the TGF-β/BMPR2/Smad pathway. Conclusions Our data suggested pulmonary epithelium-derived exosomes serve an essential role in fibroblast activation and collagen deposition in the lungs upon SiNPs stimuli, in particular, attributing to exosomal miR-494-3p targeting BMPR2 to modulate TGF-β/BMPR2/Smad pathway. Hence, strategies targeting exosomes could be a new avenue in developing therapeutics against lung injury elicited by SiNPs. Graphical Abstract

Background Dengue, a mosquito-borne viral disease, has occurred in many cities in China, and it tends to spread to higher latitudes (Huang et al., 2023). Xi’an, situated in central-west China, has witnessed an increase imported cases in the past few years, raising concerns of local dengue transmission. It is crucial to investigate the population density of Aedes albopictus and its insecticides resistance to enhance early warning of dengue fever. Methods Eight sampling sites in eight counties (YT, BL, WY, CH, YL, LN, LT, ZZ) of Xi’an city were surveyed by larval dipping and human-baited double net trap biweekly from June 2021 to September 2022. The Breteau Index (BI, number of positive containers per 100 houses) and Container Index (CI, the percentage of containers containing larvae or pupae) were used to assess larval density, and the human-baited double net trap (HDN, the number of Ae. albopictus females collected per person per hour) to indicate human bating rate (HBR). Meanwhile, the association between the meteorological factors and mosquito density was analyzed. The Ae. albopictus adult insecticides resistance was evaluated by the World Health Organization (WHO) standard resistance bioassay. Adult females were exposed to insecticide-impregnated paper for 1 h, then transferred to the recovery tube, and mortality rate was calculated after 24 h. According to the Implementation Plan for National Vector Surveillance (2016), resistance status was classified into three levels based on mortality: 98% mortality as sensitive. Results From June 2021 to September 2022, a total of 1,065 houses were surveyed for water holding containers, and 99 of 430 water holding containers were checked to be positive for Ae. albopictus larvae and pupae. A total of 1,048 Ae. albopictus females were collected. The average BI, CI and HBR were 10.39, 21.41, and 11.20 female/man/hour in 2021 and 8.86, 20.86, and 11.63 f/m/h in 2022, respectively. The findings showed that the BI exceeded 5 in most months and reached above 20 in specific months. The CI varied in different months and monitoring sites, with the highest CI in August 2021 and July 2022. The discarded tires had the highest positivity rate, with up to 40.32% testing positive for Ae. albopictus larvae. The monthly average temperature showed a positive correlation with CI (r = 0.77), and the monthly BI was positively associated with CI (r = 0.93). The BI, CI, and HBR were significantly higher in the rainy season than other seasons. The bioassay results showed that the mortality rate of Ae. albopictus at the YT monitoring site was 76.92%, indicating resistance to deltamethrin. The mortality rate of Ae. Albopictus at BL, WY, CH, YL, LN, LT, and ZZ sampling sites were varying from 81.25%∼100%, suggesting possibly resistant or still sensitive to beta-cypermethrin, alpha-cypermethrin, malathion, chlorpyrifos, and propoxur.

Abstract Rock‐climbing robots have significant potential in fieldwork and planetary exploration. However, they currently face limitations such as a lack of stability and adaptability on extreme terrains, slow locomotion, and single functionality. This study introduces a novel multimodal and adaptive rock‐climbing robot (MARCBot), which addresses these limitations through spiny grippers that draw inspiration from morpho‐functionalities observed in beetles, arboreal birds, and hoofed animals. This hybrid bioinspired design enables high attachment strength, passive adaptability to different terrains, and quick attachment on rock surfaces. The multimodal functionality of the gripper allows for attachment during climbing and support during walking. A novel control strategy using dynamics and quadratic programming (QP) optimizes attachment wrench distribution, reducing cost‐of‐transport by 20.03% and 6.05% compared to closed‐loop inverse kinematic (CLIK) and virtual model control (VMC) methods, respectively. MARCBot achieved climbing speeds of 0.15 m min−1 on a vertical discrete rock surface under gravity and trotting speeds of up to 0.21 m s−1 on various complex terrains. It is the first robot capable of climbing on rock surfaces and trotting in complex terrains without the need for switching end‐effectors. This study highlights significant advancements in climbing and multimodal locomotion for robots in extreme environments.

IntroductionExtreme weather becomes increasingly frequent and severe under climate change, causing unexpected damage to trees. Among them, sleet damage is particularly harmful to evergreen trees in subtropical area. Camphor trees (Cinnamomum camphora), as dominant street trees in central China, are prone to sleet damage, resulting in loss of valuable ecosystem functions.MethodsBy measuring tree size characteristics of 118 camphor trees before and after a record-breaking sleet event in Wuhan, a mega-city in central China, we built allometric equations between size and volume of broken branches and used the random forest regression to model sleet damage to camphor trees.ResultsWe identified that larger trees with intermediate bole height suffered more than smaller trees with tall bole height from the sleet event. We estimated the volume of broken branches of a camphor tree with DBH at 35.0 cm as 106.4 dm3, equivalent to 55.3 kg biomass loss, from the sleet event.DiscussionWe suggest that pruning the branches instead of topping the main stems of small camphor trees would reduce the sleet hazard. To mitigate the negative impacts of climate change, regular pruning should be practiced on street camphor trees to protect them from future heavy sleet events.

IntroductionClean drinking water is a necessity for maintaining public health and livelihoods. Hard water containing excessive calcium and magnesium threatens urinary health with elevated risks of kidney stones at rural villages with tap water shortages. After entitled poverty alleviation in 2019, residents of Yangxin county of Hubei Province in central China unexpected suffered shortage of tap water and additional cost of water softening. However, the impact of lack of tap water on risks of kidney stones was not yet quantified for residents at rural villages in Yangxin.MethodsWe conducted a cross-sectional analysis by testing 216 water samples from 114 families at four villages and surveying urinary health and living conditions of each householder.ResultsLab tests showed that mean total hardness of well and tap water at each village was above 355 mg/L CaCO3, except tap water from the village with government support for industrial development. Mean softening depth was 309.3 mg/L at the families paying for filters or bottle water, and mean annual cost of water was 1,915 CNY (1 CNY = 0.14 USD) equivalent to 5.8% of mean annual household income. Mean tap water availability was only 34%, and the prevalence of kidney stones among the four villages was 33.9%, 25.0% higher than the rate of kidney stones in Hubei Province. About 60% of the families showed strong willingness to accept annual government compensation of 3,324 CNY for clean water supply, whereas only 2.6% of the families wanted to pay government for water treatment. Using logistic and random forest regression models, we identify factors associated with the prevalence of kidney stones as gender (males have 3.78 times the risks of females), age (2.42 times greater risks if 10 years older), body mass index (higher risks if overweight or obese), total hardness of drinking water (2.59 times for a 100 mg/L increase in total hardness), and tap water availability (2.42 times higher among those without tap water supply compared to those with constant supply).DiscussionOld and obese males are more likely to be diagnosed with kidney stones, but tap water shortages and high total hardness of drinking water increase the risks for all residents. To improve urinary health and meet support needs of residents, tap water supply of soft water is urgently needed at the rural villages in Yangxin.

BackgroundCervical cancer, a severe threat to women’s health, is experiencing a global increase in incidence, notably among younger demographics. With artificial intelligence (AI) making strides, its integration into medical research is expanding, particularly in cervical cancer studies. This bibliometric study aims to evaluate AI’s role, highlighting research trends and potential future directions in the field.MethodsThis study systematically retrieved literature from the Web of Science Core Collection (WoSCC), employing VOSviewer and CiteSpace for analysis. This included examining collaborations and keyword co-occurrences, with a focus on the relationship between citing and cited journals and authors. A burst ranking analysis identified research hotspots based on citation frequency.ResultsThe study analyzed 927 articles from 2008 to 2024 by 5,299 authors across 81 regions. China, the U.S., and India were the top contributors, with key institutions like the Chinese Academy of Sciences and the NIH leading in publications. Schiffman, Mark, featured among the top authors, while Jemal, A, was the most cited. ‘Diagnostics’ and ‘IEEE Access’ stood out for publication volume and citation impact, respectively. Keywords such as ‘cervical cancer,’ ‘deep learning,’ ‘classification,’ and ‘machine learning’ were dominant. The most cited article was by Berner, ES; et al., published in 2008.ConclusionsAI’s application in cervical cancer research is expanding, with a growing scholarly community. The study suggests that AI, especially deep learning and machine learning, will remain a key research area, focusing on improving diagnostics and treatment. There is a need for increased international collaboration to maximize AI’s potential in advancing cervical cancer research and patient care.

The distribution information of irrigated cultivated land is important to many studies, including grain yield estimation, water resources management, drought risk assessment, and so on. This study developed a feature variable, called the irrigation probability index (IPI), based on the principle that irrigation can slow down or inhibit the evolution from meteorological drought to agricultural drought. Nebraska, which has a good irrigation information database, was selected as the study area. Combining IPI with the irrigation statistical data and other selected feature variables, irrigated cultivated land in Nebraska was mapped in 2017 using both the spatialization method and remote sensing classification methods (random forest and support vector machine). We verified the effectiveness of IPI in identifying irrigated cultivated land, analyzed the importance of different feature variables for irrigated cultivated land identification, and compared the accuracy of different irrigation mapping methods. The results show that the IPI is significantly correlated with the actual irrigation area, the area of irrigation facilities, and the number of active irrigation wells. It has a better indicative ability of irrigation in areas with a suitable climate or arid areas, than in areas with a humid climate. The crop water stress index (CWSI), IPI, vegetation index (EVI and NDVI), and land surface temperature difference between day and night are the most important feature variables that are used to distinguish irrigated cultivated land from rain-fed cultivated land. There are differences between the recognition accuracies of the three mapping methods in different climatic regions. Overall, the spatialization method had the highest accuracy (overall accuracy = 86.92 %, kappa = 0.74) and the highest similarity with the existing high-resolution irrigation maps. This study provides a direct and useful reference for other researchers to select feature variables and mapping methods in irrigated cultivated land mapping research.

Abstract DEAD-box helicase 17 (DDX17) is a typical member of the DEAD-box family with transcriptional cofactor activity. Although DDX17 is abundantly expressed in the myocardium, its role in heart is not fully understood. We generated cardiomyocyte-specific Ddx17-knockout mice (Ddx17-cKO), cardiomyocyte-specific Ddx17 transgenic mice (Ddx17-Tg), and various models of cardiomyocyte injury and heart failure (HF). DDX17 is downregulated in the myocardium of mouse models of heart failure and cardiomyocyte injury. Cardiomyocyte-specific knockout of Ddx17 promotes autophagic flux blockage and cardiomyocyte apoptosis, leading to progressive cardiac dysfunction, maladaptive remodeling and progression to heart failure. Restoration of DDX17 expression in cardiomyocytes protects cardiac function under pathological conditions. Further studies showed that DDX17 can bind to the transcriptional repressor B-cell lymphoma 6 (BCL6) and inhibit the expression of dynamin-related protein 1 (DRP1). When DDX17 expression is reduced, transcriptional repression of BCL6 is attenuated, leading to increased DRP1 expression and mitochondrial fission, which in turn leads to impaired mitochondrial homeostasis and heart failure. We also investigated the correlation of DDX17 expression with cardiac function and DRP1 expression in myocardial biopsy samples from patients with heart failure. These findings suggest that DDX17 protects cardiac function by promoting mitochondrial homeostasis through the BCL6-DRP1 pathway in heart failure.

Abstract Background Mycobacterium tuberculosis heat-resistant antigen (Mtb-HAg) is a peptide antigen released from the mycobacterial cytoplasm into the supernatant of Mycobacterium tuberculosis (Mtb) attenuated H37Ra strain after autoclaving at 121 °C for 20 min. Mtb-HAg can specifically induce γδ T-cell proliferation in vitro. However, the exact composition of Mtb-HAg and the protein antigens that are responsible for its function are currently unknown. Methods Mtb-HAg extracted from the Mtb H37Ra strain was subjected to LC‒MS mass spectrometry. Twelve of the identified protein fractions were recombinantly expressed in Escherichia coli by genetic engineering technology using pET-28a as a plasmid and purified by Ni–NTA agarose resin to stimulate peripheral blood mononuclear cells (PBMCs) from different healthy individuals. The proliferation of γδ T cells and major γδ T-cell subset types as well as the production of TNF-α and IFN-γ were determined by flow cytometry. Their proliferating γδ T cells were isolated and purified using MACS separation columns, and Mtb H37Ra-infected THP-1 was co-cultured with isolated and purified γδ T cells to quantify Mycobacterium viability by counting CFUs. Results In this study, Mtb-HAg from the attenuated Mtb H37Ra strain was analysed by LC‒MS mass spectrometry, and a total of 564 proteins were identified. Analysis of the identified protein fractions revealed that the major protein components included heat shock proteins and Mtb-specific antigenic proteins. Recombinant expression of 10 of these proteins in by Escherichia coli genetic engineering technology was used to successfully stimulate PBMCs from different healthy individuals, but 2 of the proteins, EsxJ and EsxA, were not expressed. Flow cytometry results showed that, compared with the IL-2 control, HspX, GroEL1, and GroES specifically induced γδ T-cell expansion, with Vγ2δ2 T cells as the main subset, and the secretion of the antimicrobial cytokines TNF-α and IFN-γ. In contrast, HtpG, DnaK, GroEL2, HbhA, Mpt63, EsxB, and EsxN were unable to promote γδ T-cell proliferation and the secretion of TNF-α and IFN-γ. None of the above recombinant proteins were able to induce the secretion of TNF-α and IFN-γ by αβ T cells. In addition, TNF-α, IFN-γ-producing γδ T cells inhibit the growth of intracellular Mtb. Conclusion Activated γδ T cells induced by Mtb-HAg components HspX, GroES, GroEL1 to produce TNF-α, IFN-γ modulate macrophages to inhibit intracellular Mtb growth. These data lay the foundation for subsequent studies on the mechanism by which Mtb-HAg induces γδ T-cell proliferation in vitro, as well as the development of preventive and therapeutic vaccines and rapid diagnostic reagents.

Abstract Stabilization of topological spin textures in layered magnets has the potential to drive the development of advanced low-dimensional spintronics devices. However, achieving reliable and flexible manipulation of the topological spin textures beyond skyrmion in a two-dimensional magnet system remains challenging. Here, we demonstrate the introduction of magnetic iron atoms between the van der Waals gap of a layered magnet, Fe3GaTe2, to modify local anisotropic magnetic interactions. Consequently, we present direct observations of the order-disorder skyrmion lattices transition. In addition, non-trivial topological solitons, such as skyrmioniums and skyrmion bags, are realized at room temperature. Our work highlights the influence of random spin control of non-trivial topological spin textures.

Protective vaccines are crucial for preventing and controlling coronavirus disease 2019 (COVID-19). Updated vaccines are needed to confront the continuously evolving and circulating severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants. These vaccines should be safe, effective, amenable to easily scalable production, and affordable. Previously, we developed receptor binding domain (RBD) dimer-based protein subunit vaccines (ZF2001 and updated vaccines) in mammalian cells. In this study, we explored a strategy for producing RBD-dimer immunogens in Pichia pastoris. We found that wild-type P. pastoris produced hyperglycosylated RBD-dimer protein containing four N-glycosylation sites in P. pastoris. Therefore, we engineered the wild type P. pastoris (GS strain) into GSΔOCH1pAO by deleting the OCH1 gene (encoding α-1,6-mannosyltransferase enzyme) to decrease glycosylation, as well as by overexpressing the HIS4 gene (encoding histidine dehydrogenase) to increase histidine synthesis for better growth. In addition, RBD-dimer protein was truncated to remove the R328/F329 cleavage sites in P. pastoris. Several homogeneous RBD-dimer proteins were produced in the GSΔOCH1pAO strain, demonstrating the feasibility of using the P. pastoris expression system. We further resolved the cryo-EM structure of prototype-Beta RBD-dimer complexed with the neutralizing antibody CB6 to reveal the completely exposed immune epitopes of the RBDs. In a murine model, we demonstrated that the yeast-produced RBD-dimer induces robust and protective antibody responses, which is suitable for boosting immunization. This study developed the yeast system for producing SARS-CoV-2 RBD-dimer immunogens, providing a promising platform and pipeline for the future continuous updating and production of SARS-CoV-2 vaccines.

ABSTRACT It is critical to develop quick, accurate, and efficient sterilization for detecting Escherichia coli O157:H7 in order to prevent infections and outbreaks of foodborne illnesses. Herein, we established a colorimetric biosensor with sterilizing properties using copper selenide nanoparticles to detect E. coli O157:H7. The sample was mixed with magnetic nanoprobes and nanozyme probes to form a sandwich structure, and then the unbound nanozyme probes were collected by magnetic separation. Finally, the 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate)-hydrogen peroxide (H2O2) reporting system was added for signal amplification. The change from colorless to green can be seen with the naked eye. Under the optimal conditions, the detection range of E. coli O157:H7 was 102–106 CFU/mL, and the detection limit was 0.35 × 102 CFU/mL. The total detection time was 80 minutes, which can be successfully applied to milk and mineral water. In addition, the colorimetric sensor can kill the target bacteria by irradiating it under a 980-nm laser for 5 minutes. In conclusion, this sensor is a promising tool for rapidly detecting foodborne pathogens and promptly eliminating bacteria.IMPORTANCEEscherichia coli O157:H7 is a major threat to public health. At present, the detection methods for E. coli O157:H7 mainly include traditional bacterial culture, immunology (enzyme-linked immune-sorbent assay) and molecular biology techniques (polymerase chain reaction). These methods have the limitations of professional operation, waste of time and energy, and high cost. Therefore, we have developed a simple, fast, bactericidal colorimetric biosensor to detect E. coli. O157:H7. The entire process was completed in 80 minutes. The method has been successfully applied to milk and mineral water samples with satisfactory results, proving that the method is an effective method for real-time detection and inactivation of bacteria.

Abstract Acute asthma exacerbation refers to the progressive deterioration of asthma symptoms that is always triggered by virus infection represented by respiratory syncytial virus (RSV). After RSV infection, exaggerated Th2‐mediated pulmonary inflammation is the critical pathological response of asthmatic patients with acute exacerbation. Significantly, airway epithelial cells, being the primary targets of RSV infection, play a crucial role in controlling the pulmonary inflammatory response by releasing airway epithelial cell‐derived exosomes (AEC‐Exos), which potentially influence the development of asthma. However, the specific role of AEC‐Exos in acute asthma exacerbation after RSV infection remains obscure. The purpose of this study was to determine the distinct function of AEC‐Exos in exacerbating acute asthma following RSV infection. Blockade of exosomes by GW reduce the enhanced pulmonary inflammation significantly. Specifically, the enhanced Th2 inflammation was induced by AEC‐Exos thorough transportation of hsa‐miR‐155‐5p–Sirtuin 1 (SIRT1) pathway during acute asthma exacerbation. Targeted inhibition of hsa‐miR‐155‐5p blocks the exaggerated Th2 inflammation effectively in mice with acute asthma exacerbation. In summary, our study showed that during acute asthma exacerbation after RSV infection, AEC‐Exos promote the enhanced Th2 inflammation through transportation of increased hsa‐miR‐155‐5p, which was mediated partly through SIRT1‐mediated pathway. hsa‐miR‐155‐5p is a potential biomarker for early prediction of acute asthma exacerbation.

ObjectiveThis study investigates the efficacy of training methodologies aimed at mitigating asymmetries in lower limb strength and explosiveness among basketball players.MethodsThirty male university basketball athletes were enrolled in this research. Initial assessments were made regarding their physical attributes, strength, and explosiveness. Subsequently, the participants were randomly allocated into two groups: an experimental group (EG, n = 15) and a control group (CG, n = 15). Over 10 weeks, the EG engaged in a unilateral compound training regimen, incorporating resistance training exercises such as split squats, Bulgarian split squats, box step-ups, and single-leg calf raises (non-dominant leg: three sets of six repetitions; dominant leg: one set of six repetitions) and plyometric drills including lunge jumps, single-leg hops with back foot raise, single-leg lateral jumps, and single-leg continuous hopping (non-dominant leg: three sets of 12 repetitions; dominant leg: one set of 12 repetitions). The CG continued with their standard training routine. Assessments of limb asymmetry and athletic performance were conducted before and after the intervention to evaluate changes.Results1) Body morphology assessments showed limb length and circumference discrepancies of less than 3 cm. The initial average asymmetry percentages in the single-leg countermovement jump (SLCMJ) for jump height, power, and impulse were 15.56%, 12.4%, and 4.48%, respectively. 2) Post-intervention, the EG demonstrated a significant reduction in the asymmetry percentages of SLCMJ height and power (p < 0.01), along with improvements in the isometric mid-thigh pull (IMTP) test metrics (p < 0.05). 3) The EG also showed marked enhancements in the double-leg countermovement jump (CMJ) and standing long jump (SLJ) outcomes compared to the CG (p < 0.01), as well as in squat performance (p < 0.05).ConclusionThe 10-week unilateral compound training program effectively reduced the asymmetry in lower limb strength and explosiveness among elite male university basketball players, contributing to increased maximal strength and explosiveness.

The biological world serves as a vast reservoir of inspiration for human innovation, particularly in the realm of robotics designed to navigate intricate granular environments. Among these creatures adept at burrowing, the mole stands out due to its exceptional body structure and unparalleled efficiency, surpassing most engineering burrowing systems. Consequently, the mole serves as an ideal model for designing highly efficient burrowing robots. This study introduces a mole‐inspired robot burrowing with forelimbs, specifically designed for planetary soil exploration. By closely examining the distinctive body morphology of moles, a forelimb burrowing mechanism is devised through biomimetic mapping, and its kinematics is thoroughly analyzed. A robot prototype is developed and an experimental setup is constructed to evaluate its burrowing performance. A series of tests are conducted to assess the capabilities of the robot, including forelimb burrowing, robot crawling, and robot burrowing. The results demonstrate that the proposed mole‐inspired burrowing robot is capable of crawling and burrowing to a certain depth using its forelimbs. Although it exhibits some upward displacement, this issue can be mitigated by modifying the head configuration and adjusting the forelimb posture to effectively overcome the vertical stress and lift force exerted by granular soils due to intensity gradient.

Abstract. Background:. Triple-negative breast cancer (TNBC) is an aggressive type of breast cancer associated with poor prognosis and limited treatment options. The androgen receptor (AR) has emerged as a potential therapeutic target for luminal androgen receptor (LAR) TNBC. However, multiple studies have claimed that anti-androgen therapy for AR-positive TNBC only has limited clinical benefits. This study aimed to investigate the role of AR in TNBC and its detailed mechanism. Methods:. Immunohistochemistry and TNBC tissue sections were applied to investigate AR and nectin cell adhesion molecule 4 (NECTIN4) expression in TNBC tissues. Then, in vitro and in vivo assays were used to explore the function of AR and estrogen receptor beta (ERβ) in TNBC. Chromatin immunoprecipitation sequencing (ChIP-seq), co-immunoprecipitation (co-IP), molecular docking method, and luciferase reporter assay were performed to identify key molecules that affect the function of AR. Results:. Based on the TNBC tissue array analysis, we revealed that ERβ and AR were positive in 21.92% (32/146) and 24.66% (36/146) of 146 TNBC samples, respectively, and about 13.70% (20/146) of TNBC patients were ERβ positive and AR positive. We further demonstrated the pro-tumoral effects of AR on TNBC cells, however, the oncogenic biology was significantly suppressed when ERβ transfection in LAR TNBC cell lines but not in AR-negative TNBC. Mechanistically, we identified that NECTIN4 promoter –42 bp to –28 bp was an AR response element, and that ERβ interacted with AR thus impeding the AR-mediated NECTIN4 transcription which promoted epithelial–mesenchymal transition in tumor progression. Conclusions:. This study suggests that ERβ functions as a suppressor mediating the effect of AR in TNBC prognosis and cell proliferation. Therefore, our current research facilitates a better understanding of the role and mechanisms of AR in TNBC carcinogenesis.

This paper delves into what the application of authenticity to Human-Machine Communication (HMC) can teach us about authenticity and us as HMC researchers and as a com- munity. Inspired by the 2023 pre-conference “HMC: Authenticity in communicating with machines,” two central questions guide the discussion: How does HMC contribute to our understanding of authentic communication with machines? And how can the concept of authenticity contribute to our sense of self as researchers within the HMC field? Through the collaborative effort of 22 authors, the paper explores the re-conceptualization of authenticity and presents recent areas of tension that guide the HMC research and community. With this paper we aim at offering a gateway for scholars to connect and engage with the evolving HMC field.

We propose a distributed multi-objective optimization (DMO) method for designing chiral plasmonic metasurface that satisfies multiple objectives simultaneously. We aim to improve the refractive index sensitivity of the archetypical Born-Kuhn type chiral plasmonic metasurface while ensuring that circular dichroism (CD) is as pronounced as possible at a designated resonance wavelength. By leveraging distributed technology, the proposed method significantly improves the time efficiency of the optimization process. The simulation results demonstrate approximately 33% enhancement in sensitivity by DMO, as well as greater than 100% boost in time efficiency compared to stand-alone optimization approaches. These findings highlight the potential of the proposed method to guide the design of chiral plasmonic metasurface sensors, enabling the simultaneous optimization of multiple objectives and facilitating advancements in chiral optics and sensing applications.

Macrophages play a central role in immunological responses to metallic species associated with the localized corrosion of metallic implants, and mediating in peri-implant inflammations. Herein, the pathways of localized corrosion-macrophage interactions were systematically investigated on 316L stainless steel (SS) implant metals. Electrochemical monitoring under macrophage-mediated inflammatory conditions showed a decreased pitting corrosion resistance of 316L SSs in the presence of RAW264.7 cells as the cells would disrupt biomolecule adsorbed layer on the metal surface. The pitting potentials were furtherly decreased when the RAW264.7 cells were induced to the M1 pro-inflammatory phenotype by the addition of lipopolysaccharide (LPS), and pitting corrosion preferentially initiated at the peripheries of macrophages. The overproduction of aggressive ROS under inflammatory conditions would accelerate the localized corrosion of 316L SS around macrophages. Under pitting corrosion condition, the viability and pro-inflammatory polarization of RAW264.7 cells were region-dependent, lower viability and more remarkable morphology transformation of macrophages in the pitting corrosion region than the pitting-free region. The pitting corrosion of 316L SS induced high expression of CD86, TNF-α, IL-6 and high level of intracellular ROS in macrophages. Uneven release of metallic species (Fe2+, Cr3+, Ni2+, etc) and uneven distribution of surface overpotential stimulated macrophage inflammatory responses near the corrosion pits. A synergetic effect of localized corrosion and macrophages was revealed, which could furtherly promote localized corrosion of 316L SS and macrophage inflammatory reactions. Our results provided direct evidence of corrosion-macrophage interaction in metallic implants and disclosed the pathways of this mutual stimulation effect.

AbstractIn graphene electronics applications, in order to obtain the size and pattern required for the device, it is often necessary to photolithography the graphene after growth, resulting in contamination of graphene by the photoresist which have doping effect. Therefore, in order to avoid this effect, this article focused on directly grown patterned graphene. Based on atmospheric pressure chemical vapour deposition (APCVD) technology, patterned graphene was successfully grown on SiO2/Si by metal proximity catalytic effect. The patterned graphene was characterized by Raman spectroscopy and optical microscope. The effects of parameters such as gas flow, growth temperature, and growth time on the growth of patterned graphene were explored, and the best results were obtained. Metal copper and cobalt thin films were used for assisted catalysis, respectively, and the mechanism of metal proximity catalysis was explored. The experimental results showed that proximity catalysis is a catalytic growth mechanism based on surface diffusion. The growth method avoids using photolithography to make patterns, and can grow patterned graphene on insulating substrates or semiconductors in one step, which is of great significance for making patterned graphene and applying them to semiconductor devices.

Summary: Nanoparticle vaccines displaying mosaic receptor-binding domains (RBDs) or spike (S) from severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) or other sarbecoviruses are used in preparedness against potential zoonotic outbreaks. Here, we describe a self-assembling nanoparticle using lumazine synthase (LuS) as the scaffold to display RBDs from different sarbecoviruses. Mosaic nanoparticles induce sarbecovirus cross-neutralizing antibodies comparable to a nanoparticle cocktail. We find mosaic nanoparticles elicit a B cell receptor repertoire using an immunodominant germline gene pair of IGHV14-3:IGKV14-111. Most of the tested IGHV14-3:IGKV14-111 monoclonal antibodies (mAbs) are broadly cross-reactive to clade 1a, 1b, and 3 sarbecoviruses. Using mAb competition and cryo-electron microscopy, we determine that a representative IGHV14-3:IGKV14-111 mAb, M2-7, binds to a conserved epitope on the RBD, largely overlapping with the pan-sarbecovirus mAb S2H97. This suggests mosaic nanoparticles expand B cell recognition of the common epitopes shared by different clades of sarbecoviruses. These results provide immunological insights into the cross-reactive responses elicited by mosaic nanoparticles against sarbecoviruses.

07Cr16Ni6 alloy is a kind of martensitic-austenitic duplex stainless steel that is widely used in aviation and aerospace. Electrochemical machining (ECM) is an ideal manufacturing process for 07Cr16Ni6 alloy because of its high machining accuracy and good final surface quality. Studying the electrochemical dissolution behavior is pre-requisite and key to optimizing the ECM process; however, few studies have focused on the electrochemical dissolution behavior of 07Cr16Ni6 alloy. In this work, the corrosion behavior, passivation characteristics, efficiency curves, and material-removal process of 07Cr16Ni6 alloy in NaNO3 solution were comprehensively investigated. Based on the curves of potentiodynamic polarization and conductivity curve, it was found that both of them have significant passive and transpassive characteristics. The results of X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy indicated that the passive film was mainly composed of Fe3O4, α-Fe2O3, γ-Fe2O3, Cr2O3, NiO, SiO, and SiO2, and its structure was composed of a dense inner-layer film and a loose outer-layer film. A schematic model was proposed to characterize the interface structure between the 07Cr16Ni6 alloy, the passive film and electrolyte. ECM tests were performed at different current densities and for different corrosion times. The current-efficiency results indicate that the material-removal rate can be divided into three regions. The current efficiency first rises gently, then rises steeply once the current density exceeds 26 A cm−2; it finally remains stable at current densities greater than 45 A cm−2. The corrosion morphology exhibits loose, blocky bulges at low current density, while the surface exhibits lath-type martensite structures when the current density j > 15 A cm−2. The material-dissolution process of the 07Cr16Ni6 alloy in NaNO3 solution at 20 A cm−2 was presented. Finally, a model of dissolution was established to characterize the electrochemical dissolution of the 07Cr16Ni6 alloy in NaNO3 solution.

Abstract Diamond, with ultrahigh hardness, high wear resistance, high thermal conductivity, and so forth, has attracted worldwide attention. However, researchers found emergent reactions at the interfaces between diamond and ferrous materials, which significantly affects the performance of diamond‐based devices. Herein, combing experiments and theoretical calculations, taking diamond–iron (Fe) interface as a prototype, the counter‐diffusion mechanism of Fe/carbon atoms has been established. Surprisingly, it is identified that Fe and diamond first form a coherent interface, and then Fe atoms diffuse into diamond and prefer the carbon vacancies sites. Meanwhile, the relaxed carbon atoms diffuse into the Fe lattice, forming Fe3C. Moreover, graphite is observed at the Fe3C surface when Fe3C is over‐saturated by carbon atoms. The present findings are expected to offer new insights into the atomic mechanism for diamond‐ferrous material's interfacial reactions, benefiting diamond‐based device applications.

Abstract Engineering lattice defects have emerged as a promising approach to effectively modulate the functionality of devices. Particularly, antiphase boundaries (APBs) as planar defects have been considered major obstacles to optimizing the ionic conductivity of mixed ionic-electronic conductors (MIECs) in solid oxide fuel applications. Here our study identifies topotactically transformable APBs (tt-APBs) at the atomic level and demonstrates that they exhibit higher ionic conductivity at elevated temperatures as compared to perfect domains. In-situ observation at the atomic scale tracks dynamic oxygen migration across these tt-APBs, where the abundant interstitial sites between tetrahedrons facilitate the ionic migration. Furthermore, annealing in an oxidized atmosphere can lead to the formation of interstitial oxygen at these APBs. These pieces of evidence clearly clarify that the tt-APBs can contribute to oxygen conductivity as anion diffusion channels, while the topotactically non-transformable APBs cannot. The topotactic transformability opens the way of defect engineering strategies for improving ionic transportation in MIECs.

Abstract Fully convolutional neural network has shown advantages in the salient object detection by using the RGB or RGB-D images. However, there is an object-part dilemma since most fully convolutional neural network inevitably leads to an incomplete segmentation of the salient object. Although the capsule network is capable of recognizing a complete object, it is highly computational demand and time consuming. In this paper, we propose a novel convolutional capsule network based on feature extraction and integration for dealing with the object-part relationship, with less computation demand. First and foremost, RGB features are extracted and integrated by using the VGG backbone and feature extraction module. Then, these features, integrating with depth images by using feature depth module, are upsampled progressively to produce a feature map. In the next step, the feature map is fed into the feature-integrated convolutional capsule network to explore the object-part relationship. The proposed capsule network extracts object-part information by using convolutional capsules with locally-connected routing and predicts the final salient map based on the deconvolutional capsules. Experimental results on four RGB-D benchmark datasets show that our proposed method outperforms 23 state-of-the-art algorithms.

Abstract With wave-particle decomposition, a unified gas-kinetic wave-particle (UGKWP) method has been developed for multiscale flow simulations. With the variation of the cell Knudsen number, the UGKWP method captures the transport process in all flow regimes without the kinetic solver’s constraint on the numerical mesh size and time step being determined by the kinetic particle mean free path and particle collision time. In the current UGKWP method, the cell Knudsen number, which is defined as the ratio of particle collision time to numerical time step, is used to distribute the components in the wave-particle decomposition. The adaptation of particles in the UGKWP method is mainly for the capturing of the non-equilibrium transport. In this aspect, the cell Knudsen number alone is not enough to identify the non-equilibrium state. For example, in the equilibrium flow regime with a Maxwellian distribution function, even at a large cell Knudsen number, the flow evolution can be still modelled by the Navier-Stokes solver. More specifically, in the near space environment both the hypersonic flow around a space vehicle and the plume flow from a satellite nozzle will encounter a far field rarefied equilibrium flow in a large computational domain. In the background dilute equilibrium region, the large particle collision time and a uniform small numerical time step can result in a large local cell Knudsen number and make the UGKWP method track a huge number of particles for the far field background flow in the original approach. But, in this region the analytical wave representation can be legitimately used in the UGKWP method to capture the nearly equilibrium flow evolution. Therefore, to further improve the efficiency of the UGKWP method for multiscale flow simulations, an adaptive UGKWP (AUGKWP) method is developed with the introduction of an additional local flow variable gradient-dependent Knudsen number. As a result, the wave-particle decomposition in the UGKWP method is determined by both the cell and gradient Knudsen numbers, and the use of particles in the UGKWP method is solely to capture the non-equilibrium flow transport. The current AUGKWP method becomes much more efficient than the previous one with the cell Knudsen number only in the determination of wave-particle composition. Many numerical tests, including Sod shock tube, normal shock structure, hypersonic flow around cylinder, flow around reentry capsule, and an unsteady nozzle plume flow, have been conducted to validate the accuracy and efficiency of the AUGKWP method. Compared with the original UGKWP method, the AUGKWP method achieves the same accuracy, but has advantages in memory reduction and computational efficiency in the simulation for flows with the co-existing of multiple regimes.

Although many people have been vaccinated against COVID-19, infections with SARS-CoV-2 seem hard to avoid. There is a need to develop more effective vaccines and immunization strategies against emerging variants of infectious diseases. To understand whether different immunization strategies using variants sequence-based virus-like particles (VLPs) vaccines could offer superior immunity against future SARS-CoV-2 variants, our team constructed VLPs for the original Wuhan-Hu-1 strain (prototype), Delta (δ) variant, and Omicron (ο) variant of SARS-CoV-2, using baculovirus-insect expression system. Then we used these VLPs to assess the immune responses induced by homologous prime-boost, heterologous prime-boost, and sequential immunizations strategies in a mouse model. Our results showed that the pro+δ+ο sequential strategies elicited better neutralizing antibody responses. These sequential strategies also take advantage of inducing CD4+ T and CD8+ T lymphocytes proliferation and tendency to cytokine of Th1. Currently, our data suggest that sequential immunization with VLPs of encoding spike protein derived from SARS-CoV-2 variants of concern may be a potential vaccine strategy against emerging diseases, such as “Disease X”.

In China, saline–alkali lands constitute 5.01% of the total land area, having a significant impact on both domestic and international food production. Rapeseed (Brassica napus L.), as one of the most important oilseed crops in China, has garnered considerable attention due to its potential adaptability to saline conditions. Breeding and improving salt-tolerant varieties is a key strategy for the effective utilization of saline lands. Hence, it is important to conduct comprehensive research into the adaptability and salt tolerance mechanisms of Brassica napus in saline environments as well as to breed novel salt-tolerant varieties. This review summarizes the molecular mechanism of salt tolerance, physiological and phenotypic indexes, research strategies for the screening of salt-tolerant germplasm resources, and genetic engineering tools for salt stress in Brassica napus. It also introduces various agronomic strategies for applying exogenous substances to alleviate salt stress and provide technological tools and research directions for future research on salt tolerance in Brassica napus.

Reinforced concrete structures play a pivotal role in island and reef engineering projects. Given the resource constraints typical of island regions, substituting traditional manufactured sand aggregate with reef limestone not only reduces reliance on river sand but also addresses the issue of disposing of waste reef limestone slag generated during excavation. However, the performance characteristics of reef limestone concrete, particularly its bond strength with reinforcing steel, warrant further investigation. This is particularly true for the bond–slip behavior of the reinforcement. This study aims to elucidate the effects of various parameters on the bond performance between steel and reef limestone concrete through central pullout tests. These parameters include the type and diameter of the reinforcement, bond length, and loading rate. The investigation encompasses the analysis of load–slip curves, bond failure modes, and variations in bond stress. Additionally, using the Abaqus software, a numerical simulation was conducted to analyze the mesoscopic stress characteristics, thereby revealing the mechanisms of bond formation and failure modes between steel reinforcement and reef limestone concrete. The results indicate that the bond–slip curve for reef limestone concrete reinforced with ribbed rebars and Glass Fiber-Reinforced Polymer (GFRP) rebars can be broadly categorized into four phases: minor slip, slip, decline, and residual, with the residual phase exhibiting a wave-like pattern. The predominant failure modes in reef limestone concrete are either pulling out or splitting. The bond stress in reef limestone concrete decreases with an increase in rebar diameter and bond length; conversely, it increases with the loading rate, although the ultimate slip decreases. The mesoscopic failure characteristics of reinforced reef limestone concrete, as simulated in Abaqus, are consistent with the experimental outcomes.

Introduction The widespread popularity of e-cigarettes is considered an important public health concern. However, only some studies have investigated the prevalence of e-cigarette use in Shanghai, China. Research on the perceived harmfulness of e-cigarettes and public support for e-cigarette regulations in China is limited. This study aimed to estimate e-cigarette awareness, prevalence, and associated factors among adults in Shanghai, China. Methods This study used data from a representative survey conducted in Shanghai, China, in 2019. The survey was conducted at 64 surveillance points in Shanghai, China, using a multistage, stratified, cluster-randomized sampling design, recruiting community-based Chinese adults aged ≥15 years. Based on the principles outlined in the Global Adult Tobacco Survey (GATS) China Project, data were collected by conducting face-to-face interviews in households. Of the 3200 selected households, 3060 people completed the individual survey. The overall response rate was 97.4%. Results In all, 72.3% of the respondents had heard of e-cigarettes. The respondents who had used e-cigarettes at some point in their life, used them in the last 12 months, and used them currently were 5.8%, 2.6%, and 1.3%, respectively. Among adult residents who had heard of e-cigarettes, 38.2% thought they were less harmful than traditional cigarettes. The respondents who perceived e-cigarettes as more harmful than traditional cigarettes were less likely to have ever used e-cigarettes (AOR=0.2; 95% CI: 0.1–0.5, p=0.0015) and more likely to support incorporating e-cigarettes into the regulation of smoking control (AOR=3.9; 95% CI: 1.8–8.6, p=0.0008). Conclusions Our findings reveal that the awareness about e-cigarettes was high, and the prevalence of e-cigarette use was similar to the findings from previous studies in China. The harmful perception of e-cigarettes warrants further attention from public health practitioners.

Abstract Vaccination with different vaccines has been implemented globally to counter the continuous COVID-19 pandemic. However, the vaccine-elicited antibodies have reduced efficiency against the highly mutated Omicron sub-variants. Previously, we developed a protein subunit COVID-19 vaccine called ZF2001, based on the dimeric receptor-binding domain (RBD). This vaccine has been administered using different dosing intervals in real-world setting. Some individuals received three doses of ZF2001, with a one-month interval between each dose, due to urgent clinical requirements. Others had an extended dosing interval of up to five months between the second and third dose, a standard vaccination regimen for the protein subunit vaccine against hepatitis B. In this study, we profile B cell responses in individuals who received three doses of ZF2001, and compared those with long or short dosing intervals. We observed that the long-interval group exhibited higher and broader serologic antibody responses. These responses were associated with the increased size and evolution of vaccine-elicited B-cell receptor repertoires, characterized by the elevation of expanded clonotypes and somatic hypermutations. Both groups of individuals generated substantial amounts of broadly neutralizing antibodies (bnAbs) against various SARS-CoV-2 variants, including Omicron sub-variants such as XBB. These bnAbs target four antigenic sites within the RBD. To determine the vulnerable site of SARS-CoV-2, we employed cryo-electron microscopy to identify the epitopes of highly potent bnAbs that targeted two major sites. Our findings provide immunological insights into the B cell responses elicited by RBD-based vaccine, and suggest that a vaccination regimen of prolonging time interval should be used in practice.

Abstract Background Intra-tumoral heterogeneity (ITH) is a distinguished hallmark of cancer, and cancer stem cells (CSCs) contribute to this malignant characteristic. Therefore, it is of great significance to investigate and even target the regulatory factors driving intra-tumoral stemness. c-Myc is a vital oncogene frequently overexpressed or amplified in various cancer types, including breast cancer. Our previous study indicated its potential association with breast cancer stem cell (BCSC) biomarkers. Methods In this research, we performed immunohistochemical (IHC) staining on sixty breast cancer surgical specimens for c-Myc, CD44, CD24, CD133 and ALDH1A1. Then, we analyzed transcriptomic atlas of 1533 patients with breast cancer from public database. Results IHC staining indicated the positive correlation between c-Myc and BCSC phenotype. Then, we used bioinformatic analysis to interrogate transcriptomics data of 1533 breast cancer specimens and identified an intriguing link among c-Myc, cancer stemness and copper-induced cell death (also known as “cuproptosis”). We screened out cuproptosis-related characteristics that predicts poor clinical outcomes and found that the pro-tumoral cuproptosis-based features were putatively enriched in MYC-targets and showed a significantly positive correlation with cancer stemness. Conclusion In addition to previous reports on its oncogenic roles, c-Myc showed significant correlation to stemness phenotype and copper-induced cell toxicity in breast cancer tissues. Moreover, transcriptomics data demonstrated that pro-tumoral cuproptosis biomarkers had putative positive association with cancer stemness. This research combined clinical samples with large-scale bioinformatic analysis, covered description and deduction, bridged classic oncogenic mechanisms to innovative opportunities, and inspired the development of copper-based nanomaterials in targeting highly heterogeneous tumors.

MicroRNAs (miRNAs) are important regulatory elements involved in the regulation of various plant developmental and physiological processes by blocking the expression of target genes. MiR156 and miR529 are two combinatorial regulators, which cooperatively target the SQUAMOSA PROMOTER BINDING-LIKE (SPL) family genes. However, there has been no report about the functional conservation and divergence of miR156 and miR529 during plant development to date. In this study, the biological function and relationship of miR156, miR529 and their target OsSPL14 in rice were explored. Overexpression of miR156e or miR529a (miR156e-OE and miR529a-OE) increased the grain size and tiller number but decreased the plant height and panicle length, while an opposite phenotype was observed for their target mimicry (miR156-MIMIC and miR529a-MIMIC) transgenic plants. Stem-loop RT-PCR results revealed ubiquitous expression of miR156 in roots, axillary buds and leaves, while miR529 was preferentially expressed in the panicle. Accordingly, OsSPL14 could be preferentially and precisely cleaved by miR529a in young panicle but by miR156 in vegetative tissues. Transgenic plants generated by the target immune strategy exhibited obvious growth defects upon the blocking of miR156 and/or miR529 function in rice, confirming that both miR156 and miR529 play important roles in controlling rice growth and development. Moreover, the miR156/miR529-OsSPL14 module negatively controlled grain size by regulating the genes associated with grain size and cell cycling, and controlled plant height through a more complicated mechanism. Taken together, our results demonstrate that miR156 and miR529 respectively function dominantly in the vegetative stage and reproductive stage to control rice growth and development by regulating the accumulation of OsSPL14. These findings facilitate a better understanding of the functional conservation and divergence of miR156 and miR529 family in the miRNA combinatorial regulatory network of plants.

The spatial distribution of underground tunnels is significant to the stress redistribution in the surrounding rock masses and blast wave propagation. The field blasting tests were first carried out to study the propagation of blast-induced seismic waves through underground tunnels of the Xiluodu Hydropower Station in China. The results show that the peak horizontal particle vibration velocity can be used as a safety criterion for underground tunnels. The effects of in situ stresses and spatial distributions of the tunnel group on the vibration velocities distribution is afterward investigated by numerical simulation. The results show that there is a significant amplification of the blasting vibrations in the adjacent tunnels, which depends on their vertical positions during the excavation of a tunnel. The peak vibration velocity decreases as the lateral separation between tunnels increases. When the separation between the tunnels exceeds the width of three tunnels, the impact of the blast waves on each part of the adjacent tunnel tends to be stable on the whole. In terms of the size of the tunnel, the blasting vibration velocity in the upper part of the straight wall on the front-blast side increases as the width increases (and then levels off), while the blasting vibration velocity in the lower part decreases as the width increases (and then levels off). Finally, a generalized formula of blasting vibration velocity considering the spatial distribution is established, which can well predict the vibration velocity of particles in underground tunnels.

Alzheimer's disease (AD) is the leading cause of dementia and is rapidly becoming one of the most costly, fatal diseases, which is typically discovered in the late stage of molecular pathology, at which point medication intervention is irreversible. As a result, there is an urgent need for a low-cost, least-invasive way of screening cognitive impairment, with the goal of identifying persons at risk of AD. Mild cognitive impairment (MCI) has been described as a transitional state between normal cognitive aging and AD. Early detection and timely tracking of MCI can to some extent prevent the progression towards AD. We found a population in Northwestern China has a comparatively high prevalence of MCI. Continued education, consistent exercise, and a secure financial situation can all help older people maintain cognitive function. Due to the critical role of circulating microRNAs in intercellular signaling and the perturbations thereof, their investigation has assumed paramount significance in elucidating various pathological conditions. Numerous investigations have substantiated the significance of circulating miRNAs specifically in MCI. Here, we evaluated miR-483-5p (Area Under the Curve (AUC) is 0.901, sensitivity 79.2 % and specificity 100 %) and miR-502-5p (AUC is 0.872, sensitivity 79.2 % and specificity 83.3 %), which were derived from plasma exosomes and maintained at high levels in elderly people with MCI, could be employed as promising noninvasive biomarkers.

Shock wave therapy (SWT) is a new alternative therapy for patients with severe coronary artery disease that improves myocardial ischemic symptoms by delivering low-energy shock wave stimulation to ischaemic myocardium with low-energy pulsed waves. However, the specific mechanism of its protective effect is not fully understood, especially for the protective mechanism in cardiomyocytes after hypoxia/reoxygenation (H/R). We selected a rat H9c2 cardiomyocyte cell line to establish a stable H/R cardiomyocyte injury model by hypoxia/reoxygenation, and then used SWT for therapeutic intervention to explore its cardiomyocyte protective mechanisms. The results showed that SWT significantly increased cell viability and GSH levels while decreasing LDH levels, ROS levels, and MDA levels. SWT also improved mitochondrial morphology and function of cells after H/R. Meanwhile, we found that SWT could increase the expression of GPX4, xCT, and Bcl-2, while decreasing the expression of Bax and cleaved caspase-3, and inhibiting cardiomyocyte apoptosis and ferroptosis. Moreover, this protective effect of SWT on cardiomyocytes could be significantly reversed by knockdown of xCT, a key regulator protein of ferroptosis. In conclusion, our study shows that SWT can attenuate hypoxia–reoxygenation-induced myocardial injury and protect cardiomyocyte function by inhibiting H/R-induced apoptosis and ferroptosis, and this therapy may have important applications in the treatment of clinical myocardial ischemic diseases.

An improved understanding of biodiversity-productivity relationships (BPRs) along environmental gradients is crucial for effective ecosystem management and biodiversity conservation. The stress-gradient hypothesis suggests that BPRs are stronger in stressful environments compared to more favorable conditions. However, there is limited knowledge regarding the variation of BPRs along elevational gradients and their generality across different landscapes. To study how BPRs change with elevation, we harnessed inventory data on 6,431 trees from 152 plots surveyed twice in eight to ten year intervals in mountain forests of temperate Europe and subtropical Asia. We quantified the relationship between aboveground productivity and different biodiversity measures, including taxonomic, functional, and phylogenetic diversity. To elucidate the processes underlying BPRs, we studied the variation of different functional traits along elevation across landscapes. We found no general pattern of BPRs across landscapes and elevations. Relationships were neutral for all biodiversity measures in temperate forests, and negative for taxonomic and functional diversity in subtropical forests. BPRs were largely congruent between taxonomic, functional and phylogenetic diversity. We found only weak support for the stress-gradient hypothesis, with BPRs turning from negative to positive (effect not significant) close to the tree line in subtropical forests. In temperate forests, however, elevation patterns were strongly modulated by species identity effects as influenced by specific traits. The effect of traits such as community-weighted mean of maximum plant height and wood density on productivity was congruent across landscapes. Our study highlights the context-dependence of BPRs across elevation gradients and landscapes. Species traits are key modulating factors of BPRs and should be considered more explicitly in studies of the functional role of biodiversity. Furthermore, our findings highlight that potential trade-offs between conserving biodiversity and fostering ecosystem productivity exist, which require more attention in policy and management.