Search

The ever-growing concerns about global warming and the rapid depletion of fossil fuels have triggered a rising interest in the research for cleaner, more efficient, and cost-effective energy generation. Organic Rankine cycle systems have immense potential to become a strong alternative to conventional methods of energy generation. However, such systems' efficiency is limited by the performance of the incorporated gas expanders or prime movers. Conventional gas expanders often utilize ports or cam-operated valves. Ported expanders offer limited efficiency and controllability and produce high emissions, causing a large amount of heated and compressed gas to be wasted. Cam-operated valves, in contrast, increase expansion performance compared to ported expanders; however, they have no variability and adaptability to changes in system parameters such as gas pressure, temperature, dryness fraction, and load variation, to name a few. On a positive note, this issue can be addressed by adopting a variable timing and fast-operating, control valve with an accurate and adaptive control mechanism at the expander inlet. A properly designed and controlled valve can greatly improve the system performance of gas expanders and pave the way for an efficient low-cost alternative energy generation. This manuscript provides a comparative review of recent progress on the design, modeling, optimization, and control aspects of valves for gas expanders. A clear pathway on the scope of further development is also drawn based on the present state of the art. [ABSTRACT FROM AUTHOR]

Featured Application: Biochar, a carbon-rich material derived from organic matter through pyrolysis, enhances substrate quality by increasing water retention and nutrient availability, leading to healthier plant growth and increased biodiversity. It also plays a significant role in carbon sequestration, capturing and storing carbon that would otherwise be released into the atmosphere, thus contributing to climate change mitigation efforts. Green roofs (GRs) are a well-established green infrastructure (GI) strategy that have been extensively studied for decades to address a growing array of social and environmental challenges. Research efforts have been continuously made to contribute to the awareness of benefits of GRs and towards their widespread application. The substrate, which is one of the crucial layers of a GR system, plays a major role in the serviceability of GRs. Thus, several studies have been undertaken to alter the substrate characteristics by applying innovative substrate additives. Biochar, a carbon-rich material with a highly porous structure and large specific surface area, has been found advantageous in several areas such as agriculture, water filtration, environmental remediation, construction, and so on. However, the application of biochar in GRs has been insufficiently studied, partially because biochar amendment in GRs is a relatively recent innovation. Furthermore, a comprehensive review of the performance of biochar-amended GR substrates is lacking. This review paper aims to summarize the past performance of GRs enhanced with biochar by considering the various benefits that biochar offers. The results indicate that most of the reviewed studies observed increased retention of runoff and nutrients when utilizing biochar. Additionally, the capabilities of biochar in improving thermal insulation, plant performance, and microbial diversity, as well as its effectiveness in sequestrating carbon and controlling soil erosion, were mostly agreed upon. Notwithstanding, a definitive conclusion cannot yet be confidently made due to the limited research information from biochar–GR systems and the uneven research focus observed in the studies reviewed. The influence of biochar-related variables (including amendment rates, application methods, processed forms, and particle size) on the effectiveness of biochar was also discussed. Opportunities for future research were suggested to fill the research gaps and address challenges restricting the application of biochar in GRs. Detailed information from past research findings could serve as a foundation for further investigations into the large-scale implementation of biochar in GRs. [ABSTRACT FROM AUTHOR]

Pyrocumulonimbus (pyroCb) thunderclouds, produced from extreme bushfires, can initiate frequent cloud-to-ground (CG) lightning strikes containing extended continuing currents. This, in turn, can ignite new spot fires and inflict massive harm on the environment and infrastructures. This study presents a 3D numerical thundercloud model for estimating the lightning of different types and its striking zone for the conceptual tripole thundercloud structure which is theorized to produce the lightning phenomenon in pyroCb storms. More emphasis is given to the lower positive charge layer, and the impacts of strong wind shear are also explored to thoroughly examine various electrical parameters including the longitudinal electric field, electric potential, and surface charge density. The simulation outcomes on pyroCb thunderclouds with a tripole structure confirm the presence of negative longitudinal electric field initiation at the cloud's lower region. This initiation is accompanied by enhancing the lower positive charge region, resulting in an overall positive electric potential increase. Consequently, negative surface charge density appears underneath the pyroCb thundercloud which has the potential to induce positive (+CG) lightning flashes. With wind shear extension of upper charge layers in pyroCb, the lightning initiation potential becomes negative to reduce the absolute field value and would generate negative (−CG) lightning flashes. A subsequent parametric study is carried out considering a positive correlation between aerosol concentration and charge density to investigate the sensitivity of pyroCb electrification under the influence of high aerosol conditions. The suggested model would establish the basis for identifying the potential area impacted by lightning and could also be expanded to analyze the dangerous conditions that may arise in wind energy farms or power substations in times of severe pyroCb events. [ABSTRACT FROM AUTHOR]

Organic Rankine Cycle (ORC)–based small-scale power plants are becoming a promising instrument in the recent drive to utilize renewable sources and reduce carbon emissions. But the effectiveness of such systems is limited by the low efficiency of gas expanders, which are the main part of an ORC system. Limaçon-based expansion machines with a fast inlet control valve have great prospects as they could potentially offer efficiencies over 50%. However, the lack of a highly reliable and significantly fast control valve is hindering its possible application. In this paper, a push–pull solenoid valve is optimized using a stochastic optimization technique to provide a fast response. The optimization yields about 56–58% improvement in overall valve response. A performance comparison of the initial and optimized valves applied to a limaçon expander thermodynamic model is also presented. Additionally, the sensitivity of the valve towards a changing inlet pressure and expander rotor velocity is analyzed to better understand the effectiveness of the valve and provide clues to overall performance improvement. [ABSTRACT FROM AUTHOR]

Renewable energy-based compact energy-generation systems based on the organic Rankine cycle (ORC) can be employed to meet the ever-growing thirst for affordable and clean energy. The overall performance and effectiveness of ORC systems are constrained by the low efficiency of the gas expander, specifically the positive displacement expander, which is responsible for energy conversion from the working fluid. This low-efficiency scenario can be significantly improved by employing a control valve to regulate and restrict the flow of the working fluid into the expander. A control valve can effectively curve the loss of costly compressed and energized working fluids by allowing them to expand in the expander chamber before discharging through the outlet port. They can thus be used to regulate the amount of energy yield and output power. In this work, two direct drive rotary valves (DDRVs) operated by a stepper motor (SM-DDRV) and rotary solenoid (RS-DDRV) are suggested, and the behavior of the valves is examined. The effect of friction and temperature on the valve response is also studied. Additionally, the effect of inlet control valves on the overall system performance of the limaçon expander is assessed. Thermodynamic properties such as the isentropic efficiency and filling factor are also computed. The effect of leakage due to valve response delay is analyzed at different inlet pressures. The performance indices are compared to the expander performance without any inlet valve. The SM-DDRV setup results in a 14.86% increase in isentropic efficiency and a 220% increase in the filling factor, whereas the RS-DDRV performs moderately with a 2.58% increase in isentropic efficiency and an 80% increase in the filling factor compared to a ported expander. The SM-DDRV provides better performance indices compared to the RS-DDRV and without valve setups. However, the performance of the limaçon expander with the SM-DDRV is sensitive to the inlet pressure and degrades at higher pressure. Overall, the valves proposed in this work present key insights into improving the performance characteristics of gas expanders of ORC systems. [ABSTRACT FROM AUTHOR]

Al2O3–water nanofluids along with stationary and rotating twisted tape inserts are used to increase the rate of heat transfer in a plain tube. The simulations are conducted through varying the design parameters including angular velocity of twisted tape, Reynolds number and nanofluid volume concentration. It is found that inserting a twisted tape inside a tube substantially increases the heat transfer coefficient and friction factor compared to the plain tube. Compared to the stationary twisted tape, the rotating twisted tape exhibits a great potential to modify the average Nusselt number by about 32.8–39.6% at Reynolds number of 250, depending on the angular velocity. This is attributed to the formation of conical tornado-shape structures in the flow pattern, causing more effective mixing in the flow. By increasing the Reynolds number, the enhancement in the average Nusselt number increases in stationary and decreases in rotating configurations compared with the plain tube. To assess the tradeoff between heat transfer enhancement and pressure loss penalty, the performance evaluation criterion (PEC) is calculated. The results suggest that the highest PEC is obtained at Reynolds number of 250, nanofluid volume concentration of 3% and the highest studied angular velocity. [ABSTRACT FROM AUTHOR]