Search

Colorectal cancer is the third most common cancer in Korea and the third leading cause of death from cancer. Treatment outcomes for colon cancer are steadily improving due to national health screening programs with advances in diagnostic methods, surgical techniques, and therapeutic agents. The Korea Colon Cancer Multidisciplinary (KCCM) Committee intends to provide professionals who treat colon cancer with the most up-to-date, evidence-based practice guidelines to improve outcomes and help them make decisions that reflect their patients’ values and preferences. These guidelines have been established by consensus reached by the KCCM Guideline Committee based on a systematic literature review and evidence synthesis and by considering the national health insurance system in real clinical practice settings. Each recommendation is presented with a recommendation strength and level of evidence based on the consensus of the committee.

Purpose To assess normal CT scans with quantitative CT (QCT) analysis based on smoking habits and chronic obstructive pulmonary disease (COPD). Materials and Methods From January 2013 to December 2014, 90 male patients with normal chest CT and quantification analysis results were enrolled in our study [non-COPD never-smokers (n = 38) and smokers (n = 45), COPD smokers (n = 7)]. In addition, an age-matched cohort study was performed for seven smokers with COPD. The square root of the wall area of a hypothetical bronchus of internal perimeter 10 mm (Pi10), skewness, kurtosis, mean lung attenuation (MLA), and percentage of low attenuation area (%LAA) were evaluated. Results Among patients without COPD, the Pi10 of smokers (4.176 ± 0.282) was about 0.1 mm thicker than that of never-smokers (4.070 ± 0.191, p = 0.047), and skewness and kurtosis of smokers (2.628 ± 0.484 and 6.448 ± 3.427) were lower than never-smokers (2.884 ± 0.624, p = 0.038 and 8.594 ± 4.944, p = 0.02). The Pi10 of COPD smokers (4.429 ± 0.435, n = 7) was about 0.4 mm thicker than never-smokers without COPD (3.996 ± 0.115, n = 14, p = 0.005). There were no significant differences in MLA and %LAA between groups (p > 0.05). Conclusion Even on normal CT scans, QCT showed that the airway walls of smokers are thicker than never-smokers regardless of COPD and it preceded lung parenchymal changes.

Abstract Asthma with fixed airway obstruction (FAO) is associated with significant morbidity and rapid decline in lung function, making its treatment challenging. Quantitative computed tomography (QCT) along with data postprocessing is a useful tool to obtain detailed information on airway structure, parenchymal function, and computational flow features. In this study, we aim to identify the structural and functional differences between asthma with and without FAO. The FAO group was defined by a ratio of forced expiratory volume in 1 s (FEV1) to forced vital capacity (FVC), FEV1/FVC

Purpose: The aim of this study was to evaluate the role of Pi10 in patients with fibrotic interstitial lung abnormality (fibrotic ILA) in a chest CT, according to cumulative cigarette smoking. Methods: We retrospectively assessed 54 fibrotic ILA patients and 18 healthy non-smokers (control) who underwent non-enhanced CT and pulmonary function tests. We quantitatively analyzed airway changes (the inner luminal area, airway inner parameter, airway wall thickness, Pi10, skewness, and kurtosis) in the chest CT of fibrotic ILA patients, and the fibrotic ILA patients were categorized into groups based on pack-years: light, moderate, heavy. Airway change data and pulmonary function tests among the three groups of fibrotic ILA patients were compared with those of the control group by one-way ANOVA. Results: Mean skewness (2.58 ± 0.36) and kurtosis (7.64 ± 2.36) in the control group were significantly different from those of the fibrotic ILA patients (1.89 ± 0.37 and 3.62 ± 1.70, respectively, p < 0.001). In fibrotic ILA group, only heavy smokers had significantly increased Pi10 (mean increase 0.04, p = 0.013), increased airway wall thickness of the segmental bronchi (mean increase 0.06 mm, p = 0.005), and decreased lung diffusing capacity for carbon monoxide (p = 0.023). Conclusion: Pi10, as a biomaker of quantitative CT in fibrotic ILA patients, can reveal that smoking affects airway remodeling.

BackgroundAn artificial intelligence (AI) model using chest radiography (CXR) may provide good performance in making prognoses for COVID-19. ObjectiveWe aimed to develop and validate a prediction model using CXR based on an AI model and clinical variables to predict clinical outcomes in patients with COVID-19. MethodsThis retrospective longitudinal study included patients hospitalized for COVID-19 at multiple COVID-19 medical centers between February 2020 and October 2020. Patients at Boramae Medical Center were randomly classified into training, validation, and internal testing sets (at a ratio of 8:1:1, respectively). An AI model using initial CXR images as input, a logistic regression model using clinical information, and a combined model using the output of the AI model (as CXR score) and clinical information were developed and trained to predict hospital length of stay (LOS) ≤2 weeks, need for oxygen supplementation, and acute respiratory distress syndrome (ARDS). The models were externally validated in the Korean Imaging Cohort of COVID-19 data set for discrimination and calibration. ResultsThe AI model using CXR and the logistic regression model using clinical variables were suboptimal to predict hospital LOS ≤2 weeks or the need for oxygen supplementation but performed acceptably in the prediction of ARDS (AI model area under the curve [AUC] 0.782, 95% CI 0.720-0.845; logistic regression model AUC 0.878, 95% CI 0.838-0.919). The combined model performed better in predicting the need for oxygen supplementation (AUC 0.704, 95% CI 0.646-0.762) and ARDS (AUC 0.890, 95% CI 0.853-0.928) compared to the CXR score alone. Both the AI and combined models showed good calibration for predicting ARDS (P=.079 and P=.859). ConclusionsThe combined prediction model, comprising the CXR score and clinical information, was externally validated as having acceptable performance in predicting severe illness and excellent performance in predicting ARDS in patients with COVID-19.

In Saudi Arabia, air conditioning is the main consumer of electricity, and increasing its energy efficiency is of great importance for energy conservation and carbon footprint reduction. This study presents the evaluation of a hybrid indirect evaporative cooling-mechanical vapor compression (IEC-MVC) cycle for cooling applications in Saudi Arabia. Most cities in this country are characterized by a high sensible cooling demand, and a few cities near the coasts of the Red sea and the Persian Gulf also need dehumidification. By employing the hybrid system, IEC can undertake about 60% of the cooling load in the summer of arid cities, and energy consumption can be reduced by up to 50%. The contribution of IEC and energy saving are less significant in humid cities because the latent loads have to be handled by MVC. Over the whole year, IEC contributes 50% of the total cooling capacity and reduces energy consumption by 40% in dry cities, while the saving is lower at 15%–25% in humid cities like Mecca and Jeddah. The average water consumption of the IEC is in the range of 4–12 L/hr. The water consumption can be replenished by the condensate collected from the MVC evaporator if the ambient humidity is high. Based on the annual performance, the cost of the IEC-MVC process is calculated, and it is 15%–35% lower than the standalone MVC. The results demonstrate the great potential of the hybrid IEC-MVC cycle in Saudi Arabia.

We applied quantitative CT image matching to assess the degree of motion in the idiopathic ILD such as usual interstitial pneumonia (UIP) and nonspecific interstitial pneumonia (NSIP). Twenty-one normal subjects and 42 idiopathic ILD (31 UIP and 11 NSIP) patients were retrospectively included. Inspiratory and expiratory CT images, reviewed by two experienced radiologists, were used to compute displacement vectors at local lung regions matched by image registration. Normalized three-dimensional and two-dimensional (dorsal-basal) displacements were computed at a sub-acinar scale. Displacements, volume changes, and tissue fractions in the whole lung and the lobes were compared between normal, UIP, and NSIP subjects. The dorsal-basal displacement in lower lobes was smaller in UIP patients than in NSIP or normal subjects (p = 0.03, p = 0.04). UIP and NSIP were not differentiated by volume changes in the whole lung or upper and lower lobes (p = 0.53, p = 0.12, p = 0.97), whereas the lower lobe air volume change was smaller in both UIP and NSIP than normal subjects (p = 0.02, p = 0.001). Regional expiratory tissue fractions and displacements showed positive correlations in normal and UIP subjects but not in NSIP subjects. In summary, lung motionography quantified by image registration-based lower lobe dorsal-basal displacement may be used to assess the degree of motion, reflecting limited motion due to fibrosis in the ILD such as UIP and NSIP.

Magnetic properties of sol-gel and conventional ceramic processed Ba3Co2Fe2O41 hexaferrite were investigated and compared for terrestrial digital multimedia broadcasting (T-DMB) antenna application. All of the synthesized powder and sintered body showed almost single Z-phase. The loss tan δ of sol-gel processed and sintered Co2Z hexaferrite was 0.010 at 200 MHz, while conventional ceramic processed and sintered Co2Z showed 0.068. The ωd (resonance frequency of domain wall) and ωs (resonance frequency of spin components) of sol-gel and ceramic processed hexaferrites were estimated to be 10 and 1160 MHz and 17 and 1025 MHz, respectively. The frequency difference between ωd and ωs (1150 MHz) for the sol-gel processed hexaferrite is wider than that (1008 MHz) for the ceramic processed hexaferrite. The permeabilities of sol-gel and ceramic processed hexaferrites were 6.91 and 9.23 at 200 MHz, respectively. Both permeabilities are higher than 6.88 and 7.64 of corresponding permittivities at the same frequency, respectively. It is found that the sol-gel processed and sintered Z-type hexaferrite meet desired low-loss tan δ and broadband for T-DMB antenna. [ABSTRACT FROM AUTHOR]

Abstract Image registration-based local displacement analysis enables evaluation of respiratory motion between two computed tomography-captured lung volumes. The objective of this study was to compare diaphragm movement among emphysema, idiopathic pulmonary fibrosis (IPF) and normal subjects. 29 normal, 50 emphysema, and 51 IPF subjects were included. A mass preserving image registration technique was used to compute displacement vectors of local lung regions at an acinar scale. Movement of the diaphragm was assumed to be equivalent to movement of the basal lung within 5 mm from the diaphragm. Magnitudes and directions of displacement vectors were compared between the groups. Three-dimensional (3D) and apico-basal displacements were smaller in emphysema than normal subjects (P = 0.003, P = 0.002). Low lung attenuation area on expiration scan showed significant correlations with decreased 3D and apico-basal displacements (r = − 0.546, P

Abstract Chronic obstructive pulmonary disease (COPD) is a respiratory disorder involving abnormalities of lung parenchymal morphology with different severities. COPD is assessed by pulmonary-function tests and computed tomography-based approaches. We introduce a new classification method for COPD grouping based on deep learning and a parametric-response mapping (PRM) method. We extracted parenchymal functional variables of functional small airway disease percentage (fSAD%) and emphysema percentage (Emph%) with an image registration technique, being provided as input parameters of 3D convolutional neural network (CNN). The integrated 3D-CNN and PRM (3D-cPRM) achieved a classification accuracy of 89.3% and a sensitivity of 88.3% in five-fold cross-validation. The prediction accuracy of the proposed 3D-cPRM exceeded those of the 2D model and traditional 3D CNNs with the same neural network, and was comparable to that of 2D pretrained PRM models. We then applied a gradient-weighted class activation mapping (Grad-CAM) that highlights the key features in the CNN learning process. Most of the class-discriminative regions appeared in the upper and middle lobes of the lung, consistent with the regions of elevated fSAD% and Emph% in COPD subjects. The 3D-cPRM successfully represented the parenchymal abnormalities in COPD and matched the CT-based diagnosis of COPD.

Abstract Background Previous studies suggested that the prone position (PP) improves oxygenation and reduces mortality among patients with acute respiratory distress syndrome (ARDS). However, the mechanism of this clinical benefit of PP is not completely understood. The aim of the present study was to quantitatively compare regional characteristics of lung functions in the PP with those in the supine position (SP) using inspiratory and expiratory computed tomography (CT) scans. Methods Ninety subjects with normal pulmonary function and inspiration and expiration CT images were included in the study. Thirty-four subjects were scanned in PP, and 56 subjects were scanned in SP. Non-rigid image registration-based inspiratory-expiratory image matching assessment was used for regional lung function analysis. Tissue fractions (TF) were computed based on the CT density and compared on a lobar basis. Three registration-derived functional variables, relative regional air volume change (RRAVC), volumetric expansion ratio (J), and three-dimensional relative regional displacement (s*) were used to evaluate regional ventilation and deformation characteristics. Results J was greater in PP than in SP in the right middle lobe (P = 0 .025), and RRAVC was increased in the upper and right middle lobes (P

Abstract Background Dust exposure has been reported as a risk factor of pulmonary disease, leading to alterations of segmental airways and parenchymal lungs. This study aims to investigate alterations of quantitative computed tomography (QCT)-based airway structural and functional metrics due to cement-dust exposure. Methods To reduce confounding factors, subjects with normal spirometry without fibrosis, asthma and pneumonia histories were only selected, and a propensity score matching was applied to match age, sex, height, smoking status, and pack-years. Thus, from a larger data set (N = 609), only 41 cement dust-exposed subjects were compared with 164 non-cement dust-exposed subjects. QCT imaging metrics of airway hydraulic diameter (D h), wall thickness (WT), and bifurcation angle (θ) were extracted at total lung capacity (TLC) and functional residual capacity (FRC), along with their deformation ratios between TLC and FRC. Results In TLC scan, dust-exposed subjects showed a decrease of D h (airway narrowing) especially at lower-lobes (p

Schwannomatosis is characterized by the presence of multiple schwannomas without landmarks of NF2. It is considered the rarest form of neurofibromatosis (NF). Here, we report the first case of familial schwannomatosis with regard to the segmental/generalized phenotype, in which the proband and the daughter present a distinct phenotype in this classification. The proband presents a generalized, painless, extradural type of schwannomatosis, while the daughter shows a segmental, painful, intradural type of schwannomatosis. Whole-exome sequencing of the affected individuals revealed a shared novel SMARCB1 gene mutation (c.92A > G, p.Glu31Gly) despite the clinical variability. We thus suggest two points in the diagnosis of familial schwannomatosis: The identified novel germline SMARCB1 variant can be reflective of a phenotypical progression from a segmental to a generalized type of schwannomatosis, or an intrafamilial variability in inherited schwannomatosis, which was not reported in previous literature. The specific combination of somatic NF2 mutations may be a major factor in regulating the severity and scope of the resulting phenotype in schwannomatosis.

An immunocompetent 49-year-old man presented with swelling and pain in the lower region of his left leg that had lasted for 4 weeks. The diagnosis was severe pyomyositis and osteomyelitis in the lower left leg caused by hypervirulent Klebsiella pneumoniae (hvKP) along with multiple metastatic infections in the kidneys, lungs, and brain originating from an anorectal abscess. A virulence-gene analysis revealed that the isolated K. pneumoniae harbored rmpA, entB, ybtS, kfu, iutA, mrkD, and allS-virulence genes and belonged to the K1 capsular serotype. After repeated abscess drainage procedures, intravenous ceftriaxone was administered for more than 10 weeks, and the patient’s infection was controlled. We focused on the clinical features of hvKP originating from an anorectal abscess without a pyogenic liver abscess. We suggest that hvKP be considered a causative pathogen of pyomyositis and osteomyelitis resulting in multiple metastatic infections in an immunocompetent patient, and more information on the unexpected multiple metastatic infections should be obtained from a virulence analysis of K. pneumoniae.

The authors report a successful outcome after percutaneous transabdominal placement of a self-expandable metallic stent in a patient who had afferent loop syndrome caused by recurrent common bile duct adenocarcinoma. Enhanced abdominal CT showed marked dilation of the afferent loop adjacent to the anterior peritoneum, multiple hepatic metastases and lymph node metastasis around the choledochojejunal anastomosis site without marked dilation of intrahepatic bile ducts. Percutaneous drainage catheter was successfully placed to the dilated afferent loop just below the abdominal wall. Subsequent successful palliation of the afferent loop obstruction was achieved by placing a self-expandable metallic stent via the transabdominal route with the aid of cone-beam CT.

BackgroundAs percutaneous transthoracic needle biopsy (PTNB) of the lung is a well-established diagnostic method for the evaluating pulmonary lesions, evidence of safety based on representative data is limited. This study investigated the practice patterns of PTNB of the lung and assessed the incidence and risk factors of PTNB-related severe pneumothorax in Korea.MethodsWe used a national-level health insurance database between January 1, 2007 and December 31, 2015. Patients who underwent PTNB of the lung were identified using procedure codes for organ biopsy, fluoroscopy, computed tomography, chest radiography, and lung-related diagnosis codes. The annual age-/sex-standardized rate of PTNB and the incidence of PTNB-related severe pneumothorax were calculated. We defined severe pneumothorax as the pneumothorax requiring intervention. The odds ratios of risk factors were assessed by a generalized estimating equation model with exchangeable working correlation matrix to address clustering effect within institution.ResultsA total of 66,754 patients were identified between 2007 and 2015. The annual age-/sex-standardized rate of PTNB per 100,000 population was 19.6 in 2007 and 22.4 in 2015, and it showed an increasing trend. The incidence of severe pneumothorax was 2.4% overall: 2.5% in men and 1.2% in women, and 2.6%, 2.7%, 2.1%, 2.1%, 1.9%, 2.4%, and 2.4% from 2009 to 2015. Older age (≥60), male sex, presence of chronic obstructive pulmonary disease, receiving treatment in an urban or rural area versus a metropolitan area, and receiving treatment at a general hospital were significantly associated with the risk of severe pneumothorax.ConclusionsConsidering the increasing trend of PTNB, more attention needs to be paid to patients with risk factors for severe pneumothorax.

Z-type barium hexaferrite particles were synthesized by a one-step mixing-calcination process (MCP) and its magnetic properties were characterized and compared to the sol-gel (SGP) and the conventional ceramic (CCP) processed Z-type Ba hexaferrite with two-step calcination. We have used 71.2% pure M-type (BaFe12O19) and 83.8% pure V-type (Ba2Co2Fe12O22) precursors to synthesize Z-type by the MCP. As a result, 77.8% pure Co2Z hexaferrite particles were obtained. The purities of Co2Z hexaferrite particles processed by SGP and CCP were 75.1% and 70.7%, respectively. It was found that purity of Z-phase was controllable by purity of M- and V-type precursor particles in the MCP. Loss tan δ of sintered MCP Co2Z decreased from 0.17 at 50 MHz to 0.068 at 300 MHz, while loss tan δ of sintered SGP and CCP Co2Z were 0.12 and 0.09 at 300 MHz. It is found that this loss tan δ is controllable by the purity of Z-phase and sintering process. These results imply that our new process is potentially applicable to synthesis of any other hexaferrites and also cost-effective. [ABSTRACT FROM AUTHOR]

Background: PTEN tumor suppressor gene mutations are the most frequent genetic lesions in endometrial adenocarcinomas of the endometrioid subtype. Testing the hypothesis that altered PTEN function precedes the appearance of endometrial adenocarcinoma has been difficult, however, partly because of uncertainties in precancer diagnosis.Methods: Two series of endometrial cancer and precancer (endometrial intraepithelial neoplasia, as diagnosed by computerized morphometric analysis) tissue samples were studied, one for PTEN mutations by the use of denaturing gradient gel electrophoresis and another for PTEN protein expression by immunohistochemistry. Endometria altered by high estrogen levels that are unopposed by progestins-conditions known to increase cancer risk-were also studied by immunohistochemistry. Fisher's exact test was used for statistical analysis.Results: The PTEN mutation rate was 83% (25 of 30) in endometrioid endometrial adenocarcinomas and 55% (16 of 29) in precancers, and the difference in number of mutations was statistically significant (two-sided P =.025). No normal endometria showed PTEN mutations. Although most precancers and cancers had a mutation in only one PTEN allele, endometrioid endometrial adenocarcinomas showed complete loss of PTEN protein expression in 61% (20 of 33) of cases, and 97% (32 of 33) showed at least some diminution in expression. Cancers and most precancers exhibited contiguous groups of PTEN-negative glands, while endometria altered by unopposed estrogens showed isolated PTEN-negative glands.Conclusions: Loss of PTEN function by mutational or other mechanisms is an early event in endometrial tumorigenesis that may occur in response to known endocrine risk factors and offers an informative immunohistochemical biomarker for premalignant disease. Individual PTEN-negative glands in estrogen-exposed endometria are the earliest recognizable stage of endometrial carcinogenesis. Proliferation into dense clusters that form discrete premalignant lesions follows. [ABSTRACT FROM AUTHOR]

Given that the efficacy of employing angiosome-targeted angioplasty in the treatment of diabetic foot remains controversial, this study was conducted to examine its efficacy.We performed a systematic literature review and meta-analysis using core databases, extracting the treatment modality of angiosome-targeted angioplasty as the predictor variable, and limb salvage, wound healing, and revision rate as the outcome variables. We used the Newcastle-Ottawa Scale to assess the study quality, along with the Cochrane Risk of Bias Tool. We evaluated publication bias using a funnel plot.The search strategy identified 518 publications. After screening these, we selected four articles for review. The meta-analysis revealed that overall limb salvage and wound healing rates were significantly higher (Odds ratio = 2.209, 3.290, p = 0.001, p

To differentiate smoking-related interstitial fibrosis (SRIF) from usual interstitial pneumonia (UIP) with emphysema on CT in combined pulmonary fibrosis and emphysema (CPFE) patients.This study was approved by the institutional review board and informed consent was waived. We included 65 patients who underwent lung biopsy under the suspicion of UIP pattern on HRCT, and after radiologic-pathologic correlation, they were divided into three groups: UIP without emphysema (n = 30), UIP with emphysema (n = 26), and SRIF (n = 9). The quantitative extent of emphysema in the entire lung was visually assessed and fibrotic patterns were qualitatively analyzed based on six characteristics (asymmetry, juxta-subpleural sparing, emphysema beside the honeycombing area, absence of ground grass attenuation/reticulation in honeycombing area, inhomogeneous honeycombing, and absence of honeycombing in the upper lobes). Kaplan-Meier analysis was used for survival analysis, and logistic regression with a receiver operating characteristic curve was used to predict the possibility of SRIF.In qualitative analysis of fibrotic patterns, SRIF tended to exhibit more than three of six fibrotic features, whereas UIP with emphysema demonstrated about two of these characteristics (p = 0.035). In addition, SRIF had a higher extent of emphysema than UIP with emphysema when they have same amount of fibrosis (p = 0.014). In patients with SRIF, 5-year survival rate was 85.7%, while it was 40.7% in UIP with emphysema patients (p = 0.035).Fibrotic CT patterns and survival rate differed between SRIF and UIP with emphysema among CPFE patients, which explains the variable prognosis of CPFE.

Abstract Tuning the electronic band structures such as band-edge position and bandgap of organic semiconductors is crucial to maximize the performance of organic photovoltaic devices. We present a simple yet effective electron irradiation approach to tune the band structure of [6, 6]-phenyl-C61-butyric acid methyl ester (PCBM) that is the most widely used organic acceptor material. We have found that the lowest unoccupied molecular orbital (LUMO) level of PCBM up-shifts toward the vacuum energy level, while the highest occupied molecular orbital (HOMO) level down-shifts when PCBM is electron-irradiated. The shift of the HOMO and the LUMO levels increases as the irradiated electron fluence increases. Accordingly, the band-edge position and the bandgap of PCBM can be controlled by adjusting the electron fluence. Characterization of electron-irradiated PCBM reveals that the variation of the band structure is attributed to the molecular structural change of PCBM by electron irradiation.

Abstract We present a novel method to fabricate complete and highly oriented anodic titanium oxide (ATO) nano-porous structures with uniform and parallel nanochannels. ATO nano-porous structures are fabricated by anodizing a Ti-foil in two different organic viscous electrolytes at room temperature using a two-step anodizing method. TiO2 nanotubes covered with a few nanometer thin nano-porous layer is produced when the first and the second anodization are carried out in the same electrolyte. However, a complete titania nano-porous (TNP) structures are obtained when the second anodization is conducted in a viscous electrolyte when compared to the first one. TNP structure was attributed to the suppression of F-rich layer dissolution between the cell boundaries in the viscous electrolyte. The structural morphologies were examined by field emission scanning electron microscope. The average pore diameter is approximately 70 nm, while the average inter-pore distance is approximately 130 nm. These TNP structures are useful to fabricate other nanostructure materials and nanodevices.

Background: Cerebrospinal fluid (CSF) flow is crucial for brain homeostasis and its dysfunction is highly associated with neurodegenerative diseases. Restoring CSF circulation is proposed as a key strategy for the treatment of the diseases. Among the methods to improve CSF circulation, focused ultrasound (FUS) stimulation has emerged as a promising non-invasive brain stimulation technique, with effectiveness evidenced by ex vivo studies. However, due to technical disturbances in in vivo imaging combined with FUS, direct evidence of real-time in vivo CSF flow enhancement by FUS remains elusive., Objective: To investigate whether FUS administered through the skull base can enhance CSF influx in living animals with various real-time imaging techniques., Methods: We demonstrate a novel method of applying FUS through the skull base, facilitating cortical CSF influx, evidenced by diverse in vivo imaging techniques. Acoustic simulation confirmed effective sonication of our approach through the skull base. After injecting fluorescent CSF tracers into cisterna magna, FUS was administered at the midline of the jaw through the skull base for 30 min, during which imaging was performed concurrently., Results: Enhanced CSF influx was observed in macroscopic imaging, demonstrated by the influx area and intensity of the fluorescent dyes after FUS. In two-photon imaging, increased fluorescence was observed in the perivascular space (PVS) after stimulation. Moreover, particle tracking of microspheres showed more microspheres entering the imaging field, with increased mean speed after FUS., Conclusion: Our findings provide direct real-time in vivo imaging evidence that FUS promotes CSF influx and flow in the PVS., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Background: Proficient speakers of a language often accommodate less proficient speakers during conversation to facilitate comprehension, but information about factors such as personality and language experience that may shape how speakers perceive accommodation is limited., Purpose: We developed an online questionnaire to clarify the use of speech accommodation in relation to individual differences in anxiety, personality, and English proficiency., Method: Using Qualtrics Panels for recruitment, we surveyed a representative sample of second-language (L2) English speakers ( n = 201) and first-language (L1) English speakers ( n = 192) across the United States. We report descriptive results in addition to correlations and a factor analysis to assess the perception of accommodation in L2 and L1 speakers., Results: Only a third of L2 participants reported that L1 speakers change their speech when talking to them, and more than half are frustrated when L1 speakers do not accommodate them. Indeed, a majority of our L1 participants reported that they do not change their speech when talking to L2 speakers. For both groups, measures of anxiety, personality, and L2 proficiency modify results, providing novel evidence on factors that influence L2 accommodation., Conclusions: Results suggest that L1 speakers accommodate L2 speakers less frequently than previously reported. The data are discussed under communication accommodation theory.

Introduction: This study aimed to determine the minimum required length of microimplants (MIs) to prevent excessive micromotion during MI healing that can lead to MI failure., Methods: Hypothesizing that the implantation depth of MI in cancellous bone (ID cancel ) is the key to the control of micromotion during MI healing, we numerically investigated the minimum ID cancel required to maintain MI micromotion to below the threshold (30 μm) that would threaten MI survival. Twenty MI and bone models were built using MIs of 4 lengths and bone specimens with 5 different cortical bone thicknesses to create ID cancel in the 0.5-5.5 mm. Then, applying a horizontal force of 1.5 N on the MI head, we calculated the micromotion (peak and average MI micromotions) and determined the minimum ID cancel . A clinical test was performed to verify the numerical result by placing 160 MIs in the posterior maxilla and mandible., Results: A strong correlation (r 2 = 0.694) was found to exist between ID cancel and MI micromotion. A minimum of 2.5 mm of ID cancel was needed to maintain the level of MI micromotion (peak micromotion) <30 μm threshold. The 6-month survival rate of MI was strongly correlated with ID cancel (r 2 = 0.744) and decreased sharply when ID cancel was ≤2 mm., Conclusions: The minimum lengths of MIs to provide the minimum ID cancel of 2.5 mm required to promote successful MI healing in the posterior maxilla and mandible are 5.2 and 6.5 mm, respectively., (Copyright © 2023 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

An electrocorticogram (ECoG) is the electrical activity obtainable from the cerebral cortex and an informative source with considerable potential for future advanced applications in various brain-interfacing technologies. Considerable effort has been devoted to developing biocompatible, conformal, soft, and conductive interfacial materials for bridging devices and brain tissue; however, the implementation of brain-adaptive materials with optimized electrical and mechanical characteristics remains challenging. Herein, we present surface electrode arrays using the soft tough ionic conductive hydrogel (STICH). The newly proposed STICH features brain-adaptive softness with Young's modulus of ~9.46 kPa, which is sufficient to form a conformal interface with the cortex. Additionally, the STICH has high toughness of ~36.85 kJ/mm 3 , highlighting its robustness for maintaining the solid structure during interfacing with wet brain tissue. The stretchable metal electrodes with a wavy pattern printed on the elastomer were coated with the STICH as an interfacial layer, resulting in an improvement of the impedance from 60 kΩ to 10 kΩ at 1 kHz after coating. Acute in vivo experiments for ECoG monitoring were performed in anesthetized rodents, thereby successfully realizing conformal interfacing to the animal's cortex and the sensitive recording of electrical activity using the STICH-coated electrodes, which exhibited a higher visual-evoked potential (VEP) amplitude than that of the control device.

Bilateral brain stimulation is an important modality used to investigate brain circuits and treat neurological conditions. Recently, low-intensity pulsed ultrasound (LIPUS) received significant attention as a novel non-invasive neurostimulation technique with high spatial specificity. Despite the growing interest, the typical ultrasound brain stimulation study, especially for small animals, is limited to a single target of sonication. The constraint is associated with the complexity and the cost of the hardware system required to achieve multi-regional sonication. This work presented the development of a low-cost LIPUS system with a pair of single-element ultrasound transducers to address the above problem. The system was built with a multicore processor with an RF amplifier circuit. In addition, LIPUS device was incorporated with a wireless module (bluetooth low energy) and powered by a single 3.7 V battery. As a result, we achieved an ultrasound transmission with a central frequency of 380 kHz and a peak-to-peak pressure of 480 kPa from each ultrasound transducer. The developed system was further applied to anesthetized rats to investigate the difference between uni- and bilateral stimulation. A significant difference in cortical power density extracted from electroencephalogram signals was observed between uni- and bilateral LIPUS stimulation. The developed device provides an affordable solution to investigate the effects of LIPUS on functional interhemispheric connection., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Kim, Kum, Lee and Kim.)

Compared to current non-invasive methods utilizing magnetic and electrical means, focused ultrasound provides greater spatial resolution and penetration depth. Despite the broad application of ultrasound stimulation, there is a lack of studies dedicated to the investigation of acoustic neuromodulation on the spinal cord. This study aims to apply focused ultrasound on the spinal cord to modulate the descending pathways in a non-invasive fashion. The application of trans-spinal focused ultrasound (tsFUS) was examined on the motor deficit mouse model. tsFUS was achieved using a single-element focused ultrasound transducer operating at 3 MHz. The sonication was performed on anesthetized 6 week-old mice targeting T12 and L3 vertebrae. The effect was analyzed by comparing electromyography responses from the hindlimb induced by electrical stimulation of the motor cortex. Further, the mouse model with the Harmaline-induced essential tremor (ET) was selected to investigate the potential clinical application of tsFUS. The safety was verified by histological assessment. Sonication at the T12 area inhibited motor response, while sonication over the L3 region provided signal enhancement. Sonication of T12 of the ET mouse also showed the ability of ultrasound to suppress tremors. Meanwhile, the histological examination did not show any abnormalities with the highest applied acoustic pressure. In this work, a non-invasive motor signal modulation was achieved using tsFUS. Moreover, the results showed the ability of focused ultrasound to manage tremors in a safe manner. This study provides a stepping stone for the trans-spinal application of focused ultrasound to motor-related disorders.

Objective: Transcranial focused ultrasound (tFUS) has drawn considerable attention in the neuroscience field as a noninvasive approach to modulate brain circuits. However, the conventional approach requires the use of anesthetized or immobilized animal models, which places considerable restrictions on behavior and affects treatment. Thus, this work presents a wireless, wearable system to achieve ultrasound brain stimulation in freely behaving animals., Methods: The wearable tFUS system was developed based on a microcontroller and amplifier circuit. Brain activity induced by tFUS was monitored through cerebral hemodynamic changes using near-infrared spectroscopy. The system was also applied to stroke rehabilitation after temporal middle cerebral artery occlusion (tMCAO) in rats. Temperature calculations and histological results showed the safety of the application even with prolonged 40 min sonication., Results: The output ultrasonic wave produced from a custom PZT transducer had a central frequency of 457 kHz and peak to peak pressure of 426 kPa. The device weight was 20 g, allowing a full range of motion. The stimulation was found to induce hemodynamic changes in the sonicated area, while open-field tests showed that ultrasound applied to the ipsilateral hemisphere for 5 consecutive days after the stroke facilitated recovery., Conclusion: The wearable tFUS system has been designed and implemented on moving rats. The results showed the ability of device to cause both short- and long lasting effects., Significance: The proposed device provides a more natural environment to investigate the effects of tFUS for behavioral and long-term studies.

Background: Peri-implantitis treatments are mainly based on protocols for teeth but have not shown favorable outcomes for implants. The potential role of titanium dissolution products in peri-implantitis necessitate the consideration of material properties in devising treatment protocols. We assessed implant cleaning interventions on (1) bacterial removal from Ti-bound biofilms, (2) Ti surface alterations and related Ti particle dissolution, and (3) cytocompatibility., Methods: Acid-etched Ti discs were inoculated with human peri-implant plaque biofilms and mechanical antimicrobial interventions were applied on the Ti-bound biofilms for 30 seconds each: (1) rotary nylon brush; (2) Ti brush; (3) water-jet on high and (4) low, and compared to sterile, untreated and Chlorhexidine-treated controls. We assessed colony forming units (CFU) counts, biofilm removal, surface changes via scanning electron microscopy (SEM) and atomic force microscopy (AFM), and Ti dissolution via light microscopy and Inductively-coupled Mass Spectrometry (ICP-MS). Biological effects of Ti particles and surfaces changes were assessed using NIH/3T3 fibroblasts and MG-63 osteoblastic cell lines, respectively., Results: Sequencing revealed that the human biofilm model supported a diverse biofilm including known peri-implant pathogens. WJ and Nylon brush were most effective in reducing CFU counts (P < 0.01 versus control), whereas Chlorhexidine was least effective; biofilm imaging results were confirmatory. Ti brushes led to visible streaks on the treated surfaces, reduced corrosion resistance and increased Ti dissolution over 30 days of material aging as compared to controls, which increase was amplified in the presence of bacteria (all P-val < 0.05). Ti particles exerted cytotoxic effects against fibroblasts, whereas surfaces altered by Ti brushes exhibited reduced osteoconductivity versus controls (P < 0.05)., Conclusions: Present findings support that mechanical treatment strategies selected for implant biofilm removal may lead to Ti dissolution. Ti dissolution should become an important consideration in the clinical selection of peri-implantitis treatments and a necessary criterion for the regulatory approval of instruments for implant hygiene., (© 2020 American Academy of Periodontology.)

A nonrandom national sample of 260 sexual homicides (207 nonserial and 53 serial) disclosed 50 cases in which an offender (45 nonserial and 10 serial) inserted a foreign object into a victim's orifice. The prevalence of foreign object insertion, as well as the types and shapes of inserted objects, where the objects were obtained, the bodily location of insertions, the visibility of inserted objects at the scene, and whether the insertions were pre- or post-mortem are all reported. The foreign object insertion prevalence rate for the sexual homicide sample of cases is 19.2%. Nonserial offenders engaged in foreign object insertion at about the same rate (21.7%) as the serial offenders (18.8%). Our findings do not support the largely held notions-based mainly on case reports-that most offenders who engage in foreign object insertion are psychotic and that the insertion behavior is always post-mortem. The insertion behavior of the nonserial offenders reflects a level of sadism and deviancy comparable with the serial offenders, an unexpected finding with possible prognostic implications.