Search

Although oral drug delivery is the preferred administration route and has been used for centuries, modern drug discovery and development pipelines challenge conventional formulation approaches and highlight the insufficient mechanistic understanding of processes critical to oral drug absorption. This review presents the opinion of UNGAP scientists on four key themes across the oral absorption landscape: (1) specific patient populations, (2) regional differences in the gastrointestinal tract, (3) advanced formulations and (4) food-drug interactions. The differences of oral absorption in pediatric and geriatric populations, the specific issues in colonic absorption, the formulation approaches for poorly water-soluble (small molecules) and poorly permeable (peptides, RNA etc.) drugs, as well as the vast realm of food effects, are some of the topics discussed in detail. The identified controversies and gaps in the current understanding of gastrointestinal absorption-related processes are used to create a roadmap for the future of oral drug absorption research. © 2021 The Authors

Purpose: To understand drug solubilization as a function of age and identify drugs at risk of altered drug solubility in pediatric patients. To assess the discrimination ability of the Abraham solvation parameters and age-related changes in simulated media composition to predict in vitro drug solubility differences between pediatric and adult gastrointestinal conditions by multivariate data analysis. Methods: Differences between drug solubility in pediatric and adult biorelevant media were expressed as a % pediatric-to-adult ratio [Sp/Sa (%)]. Solubility ratios of fourteen poorly water-soluble drugs (2 amphoteric; 4 weak acids; 4 weak bases; 4 neutral compounds) were used in the analysis. Partial Least Squares Regression was based on Abraham solvation parameters and age-related changes in simulated gastrointestinal fluids, as well as their interactions, to predict the pediatric-to-adult solubility ratio. Results: The use of Abraham solvation parameters was useful as a theory-informed set of molecular predictors of drug solubility changes between pediatric and adult simulated gastrointestinal fluids. Our findings suggest that the molecular solvation environment in the fasted gastric state was similar in the pediatric age-groups studied, which led to fewer differences in the pediatric-to-adult solubility ratio. In the intestinal fasted and fed state, there was a high relative contribution of the physiologically relevant surfactants to the alteration of drug solubility in the pediatric simulated conditions compared to the adult ones, which confirms the importance of an age-appropriate composition in biorelevant media. Conclusion: Statistical models based on Abraham solvation parameters were applied mostly to better understand drug solubility differences in adult and pediatric biorelevant media. © 2021, The Author(s).

Supersaturated lipid-based drug delivery systems are increasingly being explored as a bio-enabling formulation approach, particularly in preclinical evaluation of poorlywater-soluble drugs. While increasing the drug load through thermally-induced supersaturation resulted in enhanced in vivo exposure for some drugs, for others, such as cinnarizine, supersaturated lipid-based systems have not been found beneficial to increase the in vivo bioavailability. We hypothesized that incorporation of precipitation inhibitors to reduce drug precipitation may address this limitation. Therefore, pharmacokinetic profiles of cinnarizine supersaturated lipid-based drug delivery systems with or without precipitation inhibitors were compared. Five precipitation inhibitors were selected for investigation based on a high throughput screening of twenty-one excipients. In vivo results showed that addition of 5% precipitation inhibitors to long chain monoglyceride (LCM) or medium chain monoglyceride (MCM) formulations showed a general trend of increases in cinnarizine bioavailability, albeit only statistically significantly increased for Poloxamer 407 + LCM system (i.e. 2.7-fold increase in AUC0-24h compared to LCM without precipitation inhibitors). It appeared that precipitation inhibitors mitigated the risk of in vivo precipitation of cinnarizine from sLBDDS and overall, bioavailability was comparable to that previously reported for cinnarizine after dosing of non-supersaturated lipid systems. In summary, for drugs which are prone to precipitation from supersaturated lipid-based drug delivery systems, such as cinnarizine, inclusion of precipitation inhibitors mitigates this risk and provides the opportunity to maximize exposure which is ideally suited in early efficacy and toxicology evaluation. © 2020

Objective: The objective of this study was to systematically investigate the impact of lipid composition on the ability to design supersaturated lipid-based drug delivery systems (sLBDDS) using three model drugs with different physico-chemical properties. Significance: This study expands the list of investigated sLBDDS by using alternative vehicle compositions relative to current literature. Methods and results: Drug supersaturation was thermally-induced based on previously reported methods and was successfully achieved for celecoxib and cinnarizine. For the novel drug, JNJ-2A, a lower supersaturation potential was observed for the tested LBDDS. For celecoxib and cinnarizine, crystalline precipitate was observed for some sLBDDS upon storage at 25 °C/65%RH, particularly for medium chain sLBDDS (celecoxib) and long chain sLBDDS (cinnarizine). The greater risk of precipitation observed for celecoxib and cinnarizine, particularly at higher apparent degree of supersaturation (aDS) may be related to their higher crystallization tendency as determined by differential scanning calorimetry. Conclusions: The potential for supersaturation in LBDDS, and the risk of precipitation, was found to be highly drug dependent. The apparent degree of supersaturation was considered a major factor impacting the ability to maintain drug supersaturation upon storage. © 2020, © 2020 Informa UK Limited, trading as Taylor & Francis Group.

Supersaturated lipid-based drug delivery systems have recently been investigated for oral administration for a variety of lipophilic drugs and have shown either equivalent or superior oral bioavailability compared to conventional non-supersaturated lipid-based drug delivery systems. The aim of the present work was to explore supersaturated versus non-supersaturated lipid-based systems at equivalent lipid doses, on in vivo bioavailability in rats and on in vitro permeation across a biomimetic PermeapadⓇ membrane to establish a potential in vivo - in vitro correlation. A secondary objective was to investigate the influence of lipid composition on in vitro and in vivo performance of lipid systems. Results obtained indicated that increasing the celecoxib load in the lipid-based formulations by thermally-induced supersaturation resulted in increased bioavailability for medium and long chain mono-/di-glycerides systems relative to their non-supersaturated (i.e. 85%) reference formulations, albeit only significant for the medium chain systems. Long chain systems displayed higher celecoxib bioavailability than equivalent medium chain systems, both at supersaturated and non-supersaturated drug loads. In vitro passive permeation of celecoxib was studied using both steady-state and dynamic conditions and correlated well with in vivo pharmacokinetic results with respect to compositional effects. In contrast, permeation studies indicated that flux and percentage permeated of supersaturated systems, either at steady-state or under dynamic conditions, decreased or were unchanged relative to non-supersaturated systems. This study has shown that by using two cell-free PermeapadⓇ permeation models coupled with rat-adapted gastro-intestinal conditions, bio-predictive in vitro tools can be developed to be reflective of in vivo scenarios. With further optimization, such models could be successfully used in pharmaceutical industry settings to rapidly screen various prototype formulations prior to animal studies. © 2020 The Author(s)

The absence of an intestinal absorption sink is a significant weakness of standard in vitro lipolysis methods, potentially leading to poor prediction of in vivo performance and an overestimation of drug precipitation. In addition, the majority of the described lipolysis methods only attempt to simulate intestinal conditions, thus overlooking any supersaturation or precipitation of ionizable drugs as they transition from the acidic gastric environment to the more neutral conditions of the intestine. The aim of this study was to develop a novel lipolysis method incorporating a two-stage gastric-to-intestinal transition and an absorptive compartment to reliably predict in vivo performance of lipid-based formulations (LBFs). Drug absorption was mimicked by in situ quantification of drug partitioning into a decanol layer. The method was used to characterize LBFs from four studies described in the literature, involving three model drugs (i.e., nilotinib, fenofibrate, and danazol) where in vivo bioavailability data have previously been reported. The results from the novel biphasic lipolysis method were compared to those of the standard pH-stat method in terms of reliability for predicting the in vivo performance. For three of the studies, the novel biphasic lipolysis method more reliably predicted the in vivo bioavailability compared to the standard pH-stat method. In contrast, the standard pH-stat method was found to produce more predictive results for one study involving a series of LBFs composed of the soybean oil, glyceryl monolinoleate (Maisine CC), Kolliphor EL, and ethanol. This result was surprising and could reflect that increasing concentrations of ethanol (as a cosolvent) in the formulations may have resulted in greater partitioning of the drug into the decanol absorptive compartment. In addition to the improved predictivity for most of the investigated systems, this biphasic lipolysis method also uses in situ analysis and avoids time- and resource-intensive sample analysis steps, thereby facilitating a higher throughput capacity and biorelevant approach for characterization of LBFs. © 2020 American Chemical Society.

Objective: This study aimed to systematically explore compositional effects for a series of lipid systems, on the in vitro drug solubilization and in vivo bioavailability of three poorly water-soluble drugs with different physico-chemical properties. Significance: While many lipid-based drug products have successfully reached the market, there is still a level of uncertainty on the design guidelines for such drug products with limited understanding on the influence of composition on in vitro and in vivo performance. Methods and Results: Lipid-based drug delivery systems were prepared using either single excipient systems based on partially digested triglycerides (i.e. mono- and/or di-glycerides) or increasingly complex systems by incorporating surfactants and/or triglycerides. These lipid systems were evaluated for both in vitro and in vivo behavior. Results indicated that simple single component long chain lipid systems are more beneficial for the absorption of the weak acid celecoxib and the weak base cinnarizine compared to equivalent single component medium chain lipid systems. Similarly, a two-component system produced by incorporating small amount of hydrophilic surfactant yields similar overall pharmacokinetic effects. The lipid drug delivery systems based on medium chain lipid excipients improved the in vivo exposure of the neutral drug JNJ-2A. The higher in vivo bioavailability of long chain lipid systems compared to medium chain lipid systems was in agreement with in vitro dilution and dispersion studies for celecoxib and cinnarizine. Conclusions: The present study demonstrated the benefits of using mono-/di-glycerides as single component excipients in LBDDS to streamline formulation screening and improve oral bioavailability for the three tested poorly water-soluble drugs. © 2020 Informa UK Limited, trading as Taylor & Francis Group.

Hot melt extrusion of amorphous systems has become a pivotal technology to cope with challenges of poorly water-soluble drugs. Previous research showed that small molecular additives with targeted molecular interactions enabled introduction of a polyelectrolyte matrix into hot melt extrusion that would otherwise not be possible to process due to the unfavorable properties upon heating of the pure polymer. Carboxymethyl cellulose sodium (NaCMC) with lysine or alternatively meglumine led to modified polymeric matrices that showed adequate processability by hot melt extrusion and yielded stable amorphous formulations. The investigated formulations, including fenofibrate as a model drug, were characterized by attenuated total reflectance Fourier transform infrared spectroscopy, differential scanning calorimetry, and viscosity measurements after aqueous dispersion. Further biopharmaceutical assessment started with biorelevant nonsink dissolution testing followed by a pharmacokinetic in vivo study in rats. The in vitro assessment showed superiority of the lysine-containing formulation in the extent of in vitro supersaturation and overall drug release. In accordance with this, the in vivo study also demonstrated increased exposure of the amorphous formulations and in particular for the system containing lysine. In summary, the combination of polyelectrolytes with interacting additives presents a promising opportunity for the formulation of poorly water-soluble drugs. Copyright © 2020 American Chemical Society.

Objectives: Supersaturating formulations hold great promise for delivery of poorly soluble active pharmaceutical ingredients (APIs). To profit from supersaturating formulations, precipitation is hindered with precipitation inhibitors (PIs), maintaining drug concentrations for as long as possible. This review provides a brief overview of supersaturation and precipitation, focusing on precipitation inhibition. Trial-and-error PI selection will be examined alongside established PI screening techniques. Primarily, however, this review will focus on recent advances that utilise advanced analytical techniques to increase mechanistic understanding of PI action and systematic PI selection. Key findings: Advances in mechanistic understanding have been made possible by the use of analytical tools such as spectroscopy, microscopy and mathematical and molecular modelling, which have been reviewed herein. Using these techniques, PI selection can be guided by molecular rationale. However, more work is required to see widespread application of such an approach for PI selection. Summary: Precipitation inhibitors are becoming increasingly important in enabling formulations. Trial-and-error approaches have seen success thus far. However, it is essential to learn more about the mode of action of PIs if the most optimal formulations are to be realised. Robust analytical tools, and the knowledge of where and how they can be applied, will be essential in this endeavour. © 2018 Royal Pharmaceutical Society

Amorphous solid dispersions (ASDs) represent an important formulation technique to achieve supersaturation in gastrointestinal fluids and to enhance absorption of poorly water-soluble drugs. Drug release from such systems is complex due to emergence of different colloidal structures and potential drug precipitation, which can occur in parallel to absorption. The latter drug uptake from the intestinal lumen can be simulated by an organic layer in a biphasic in vitro test, which was employed in this work to mechanistically study the release of ketoconazole from ASDs produced by hot melt extrusion using different HPMCAS grades. A particular aim was to introduce diffusing wave spectroscopy (DWS) to biopharmaceutical testing of solid dispersions. Results indicated that amorphous formulations prevented crystallization of the weakly basic drug upon transfer into the intestinal medium. Microrheological differences among polymer grades and plasticizers were revealed in the aqueous phase, which affected drug release and subsequently uptake into the organic layer. The results indicate that DWS can be employed as a new non-invasive tool to better understand drug release from solid dispersions. This novel light scattering technique is highly promising for future biopharmaceutical research on supersaturating systems such as solid dispersions. © 2019 Elsevier B.V.

Objectives: This review highlights aspects of drug hydrophobicity and lipophilicity as determinants of different oral formulation approaches with specific focus on enabling formulation technologies. An overview is provided on appropriate formulation selection by focussing on the physicochemical properties of the drug. Key findings: Crystal lattice energy and the octanol–water partitioning behaviour of a poorly soluble drug are conventionally viewed as characteristics of hydrophobicity and lipophilicity, which matter particularly for any dissolution process during manufacturing and regarding drug release in the gastrointestinal tract. Different oral formulation strategies are discussed in the present review, including lipid-based delivery, amorphous solid dispersions, mesoporous silica, nanosuspensions and cyclodextrin formulations. Summary: Current literature suggests that selection of formulation approaches in pharmaceutics is still highly dependent on the availability of technological expertise in a company or research group. Encouraging is that, recent advancements point to more structured and scientifically based development approaches. More research is still needed to better link physicochemical drug properties to pharmaceutical formulation design. © 2018 Royal Pharmaceutical Society

Solid dispersions provide a key technology to formulate poorly water-soluble drugs, and a main task of early development is appropriate selection of polymer. This study investigates the use of a novel rheology-based approach to evaluate miscibility and interactions of drugs with polymers regarding amorphous solid drug dispersions for oral administration. Tacrolimus was used as model drug and hydroxypropyl cellulose, ethylcellulose, Soluplus®, polyethyleneglycol 6000, Poloxamer-188 (Koliphor-188), and Eudragit® S100 were used as excipients. Solvent-based evaporation methods were used to prepare binary solid dispersions of drug and polymer. Data of the dilute solution viscosimetry were compared with in silico calculations of the Hansen solubility parameter (HSP), as well as phase separation/crystallization data obtained from X-ray diffraction and differential scanning calorimetry. HSP calculations in some cases led to false positive predictions of tacrolimus miscibility with the tested polymers. The novel rheology-based method provided valuable insights into drug-polymer interactions and likely miscibility with polymer. It is a rather fast, inexpensive, and robust analytical approach, which could be used complementary to in silico-based evaluation of polymers in early formulation development, especially in cases of rather large active pharmaceutical ingredients. © 2019 by the authors. Licensee MDPI, Basel, Switzerland.