Search

This study investigates the influence of temperature variations on the buckling properties of thin-walled omega-profiles fabricated from carbon-epoxy composite materials. Utilizing a MTS testing machine, compression tests were conducted on these profiles at temperatures ranging from-20°C to 80°C, in 20°C increments. The primary objective was to assess how temperature fluctuations impact the buckling load and load-bearing capacity of these composite profiles under axial compression. The experimental setup allowed for precise measurement of load-displacement and load-deflection characteristics, and the critical load at which buckling initiation occurred. Observations revealed that the buckling resistance of the profiles exhibited a complex dependence on temperature. At lower temperatures, the composite material demonstrated enhanced stiffness and strength, marginally increasing buckling resistance. Conversely, at elevated temperatures, a noticeable degradation in mechanical properties was observed, leading to a reduced buckling load and altered failure modes. To complement the experimental findings, a comprehensive finite element (FE) analysis was conducted for sample in room temperature. The FE model, developed to replicate the experimental conditions closely, employed an eigenvalue-based approach to predict the buckling initiation and progression accurately. The presented results are the results of only preliminary tests and they will be expand about more samples number as well as to determine material properties for various temperatures. [ABSTRACT FROM AUTHOR]

An exact solution of the boundary-value problem of heat conduction was obtained with consideration of heat generation due to friction and convective cooling for the strip/semi-space system. Analytical solutions to this problem are known for the case with both friction elements made of homogeneous materials or a composite layer with a micro-periodic structure. However, in this study, the strip is made of a two-component functionally gradient material (FGM). In addition, the exact, asymptotic solutions were also determined at small and large values of the Fourier number. By means of Duhamel's theorem, it was shown that the developed solution for a constant friction power allows to obtain appropriate solutions with a changing time profile of this value during heating. Numerical analysis in dimensionless form was carried out for the FGM (ZrO2—Ti-6Al-4V) strip in combination with the cast iron semi-space. The influence of the convective cooling intensity (Biot number) on the temperature field in the considered friction system was investigated. The developed mathematical model allows for a quick estimation of the maximum temperature of systems, in which one of the elements (FGM strip) is heated on the friction surface and cooled by convection on the free surface. [ABSTRACT FROM AUTHOR]