Search

While amines are widely used as additives in metal-halide perovskites, our understanding of the way amines in perovskite precursor solutions impact the resultant perovskite film is still limited. In this paper, we explore the multiple effects of benzylamine (BnAm), also referred to as phenylmethylamine, used to passivate both FA 0.75 Cs 0.25 Pb(I 0.8 Br 0.2 ) 3 and FA 0.8 Cs 0.2 PbI 3 perovskite compositions. We show that, unlike benzylammonium (BnA + ) halide salts, BnAm reacts rapidly with the formamidinium (FA + ) cation, forming new chemical products in solution and these products passivate the perovskite crystal domains when processed into a thin film. In addition, when BnAm is used as a bulk additive, the average perovskite solar cell maximum power point tracked efficiency (for 30 s) increased to 19.3% compared to the control devices 16.8% for a 1.68 eV perovskite. Under combined full spectrum simulated sunlight and 65 °C temperature, the devices maintained a better T 80 stability of close to 2500 h while the control devices have T 80 stabilities of <100 h. We obtained similar results when presynthesizing the product BnFAI and adding it directly into the perovskite precursor solution. These findings highlight the mechanistic differences between amine and ammonium salt passivation, enabling the rational design of molecular strategies to improve the material quality and device performance of metal-halide perovskites.

The stability of hybrid organic-inorganic halide perovskite semiconductors remains a significant obstacle to their application in photovoltaics. To this end, the use of low-dimensional (LD) perovskites, which incorporate hydrophobic organic moieties, provides an effective strategy to improve their stability, yet often at the expense of their performance. To address this limitation, supramolecular engineering of noncovalent interactions between organic and inorganic components has shown potential by relying on hydrogen bonding and conventional van der Waals interactions. Here, the capacity to access novel LD perovskite structures that uniquely assemble through unorthodox S-mediated interactions is explored by incorporating benzothiadiazole-based moieties. The formation of S-mediated LD structures is demonstrated, including one-dimensional (1D) and layered two-dimensional (2D) perovskite phases assembled via chalcogen bonding and S-π interactions. This involved a combination of techniques, such as single crystal and thin film X-ray diffraction, as well as solid-state NMR spectroscopy, complemented by molecular dynamics simulations, density functional theory calculations, and optoelectronic characterization, revealing superior conductivities of S-mediated LD perovskites. The resulting materials are applied in n-i-p and p-i-n perovskite solar cells, demonstrating enhancements in performance and operational stability that reveal a versatile supramolecular strategy in photovoltaics., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Titanium-oxo clusters can undergo photochemical reactions under UV light, resulting in the reduction of the titanium-oxo core and oxidation of surface ligands. This is an important step in photocatalytic processes in light-absorbing Ti/O-based clusters, metal-organic frameworks, and (nano)material surfaces; however, studying the direct outcome of this photochemical process is challenging due to the fragility of the immediate photoproducts. In this report, titanium-oxo clusters [TiO(O i Pr)(L)] n ( n = 4, L = O 2 PPh 2 , or n = 6, L = O 2 CCH 2 t Bu) undergo a two-electron photoredox reaction in the single-crystal state via an irreversible single-crystal to single-crystal (SC-SC) transformation initiated by a UV laser. The process is monitored by single crystal X-ray diffraction revealing the photoreduction of the cluster with coproduction of an (oxidized) acetone ligand, which is retained in the structure as a ligand to Ti(3+). The results demonstrate that photochemistry of inorganic molecules can be studied in the single crystal phase, allowing characterization of photoproducts which are unstable in the solution phase.

Lanthanides are versatile modulators of optoelectronic properties owing to their narrow optical emission spectra across the visible and near-infrared range. Their use in metal halide perovskites (MHPs) has recently gained prominence, although their fate in these materials has not yet been established at the atomic level. We use cesium-133 solid-state NMR to establish the speciation of all nonradioactive lanthanide ions (La 3+ , Ce 3+ , Pr 3+ , Nd 3+ , Sm 3+ , Sm 2+ , Eu 3+ , Eu 2+ , Gd 3+ , Tb 3+ , Dy 3+ , Ho 3+ , Er 3+ , Tm 3+ , Yb 3+ , Lu 3+ ) in microcrystalline CsPbCl 3 . Our results show that all lanthanides incorporate into the perovskite structure of CsPbCl 3 regardless of their oxidation state (+2, +3).

The stabilization of grain boundaries and surfaces of the perovskite layer is critical to extend the durability of perovskite solar cells. Here we introduced a sulfonium-based molecule, dimethylphenethylsulfonium iodide (DMPESI), for the post-deposition treatment of formamidinium lead iodide perovskite films. The treated films show improved stability upon light soaking and remains in the black α phase after two years ageing under ambient condition without encapsulation. The DMPESI-treated perovskite solar cells show less than 1% performance loss after more than 4,500 h at maximum power point tracking, yielding a theoretical T 80 of over nine years under continuous 1-sun illumination. The solar cells also display less than 5% power conversion efficiency drops under various ageing conditions, including 100 thermal cycles between 25 °C and 85 °C and an 1,050-h damp heat test., Competing Interests: Competing interestsS.D.S. is a co-founder of Swift Solar Inc. The remaining authors declare no competing interests., (© The Author(s) 2024.)

Due to their excellent thermal stability and ideal bandgap, metal halide inorganic perovskite based solar cells (PSCs) with inverted structure are considered as an excellent choice for perovskite/silicon tandem solar cells. However, the power conversion efficiency (PCE) of inverted inorganic perovskite solar cells (PSCs) still lags far behind that of conventional n-i-p PSCs due to interfacial energy level mismatch and high nonradiative charge recombination. Herein, the performance of inverted PSCs is significantly improved by interfacial engineering of CsPbI 3- x Br x films with 2-mercapto-1-methylimidazole (MMI). It is found that the mercapto group can preferably react with the undercoordinated Pb 2+ from perovskite by forming Pb-S bonds, which appreciably reduces the surface trap density. Moreover, MMI modification results in a better energy level alignment with the electron-transporting material, promoting carrier transfer and reducing voltage deficit. The above combination results in an open-circuit voltage enhancement by 120 mV, yielding a champion PCE of 20.6% for 0.09 cm 2 area and 17.3% for 1 cm 2 area. Furthermore, the ambient, operational and heat stabilities of inorganic PSCs with MMI modification are also greatly improved. The work demonstrates a simple but effective approach for fabricating highly efficient and stable inverted inorganic PSCs., (© 2023 Wiley-VCH GmbH.)

The sensitivity of NMR spectroscopy is considerably enhanced by dynamic nuclear polarization (DNP). In DNP polarization is transferred from unpaired electrons of a polarizing agent to nearby proton spins. In solids, this transfer is followed by the transport of hyperpolarization to the bulk via 1 H- 1 H spin diffusion. The efficiency of these steps is critical to obtain high sensitivity gains, but the pathways for polarization transfer in the region near the unpaired electron spins are unclear. Here we report a series of seven deuterated and one fluorinated TEKPol biradicals to probe the effect of deprotonation on MAS DNP at 9.4 T. The experimental results are interpreted with numerical simulations, and our findings support that strong hyperfine couplings to nearby protons determine high transfer rates across the spin diffusion barrier to achieve short build-up times and high enhancements. Specifically, 1 H DNP build-up times increase substantially with TEKPol isotopologues that have fewer hydrogen atoms in the phenyl rings, suggesting that these protons play a crucial role transferring the polarization to the bulk. Based on this new understanding, we have designed a new biradical, NaphPol, which yields significantly increased NMR sensitivity, making it the best performing DNP polarizing agent in organic solvents to date., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Low sensitivity is the primary limitation to extending nuclear magnetic resonance (NMR) techniques to more advanced chemical and structural studies. Photochemically induced dynamic nuclear polarization (photo-CIDNP) is an NMR hyperpolarization technique where light is used to excite a suitable donor-acceptor system, creating a spin-correlated radical pair whose evolution drives nuclear hyperpolarization. Systems that exhibit photo-CIDNP in solids are not common, and this effect has, up to now, only been observed for 13 C and 15 N nuclei. However, the low gyromagnetic ratio and natural abundance of these nuclei trap the local hyperpolarization in the vicinity of the chromophore and limit the utility for bulk hyperpolarization. Here, we report the first example of optically enhanced solid-state 1 H NMR spectroscopy in the high-field regime. This is achieved via photo-CIDNP of a donor-chromophore-acceptor molecule in a frozen solution at 0.3 T and 85 K, where spontaneous spin diffusion among the abundant strongly coupled 1 H nuclei relays polarization through the whole sample, yielding a 16-fold bulk 1 H signal enhancement under continuous laser irradiation at 450 nm. These findings enable a new strategy for hyperpolarized NMR beyond the current limits of conventional microwave-driven DNP.

The intrinsic low sensitivity of nuclear magnetic resonance (NMR) experiments limits their utility for structure determination of materials. Dynamic nuclear polarization (DNP) under magic angle spinning (MAS) has shown tremendous potential to overcome this key limitation, enabling the acquisition of highly selective and sensitive NMR spectra. However, so far, DNP methods have not been explored in the context of inorganic lead halide perovskites, which are a leading class of semiconductor materials for optoelectronic applications. In this work, we study cesium lead chloride and quantitatively compare DNP methods based on impregnation with a solution of organic biradicals with doping of high-spin metal ions (Mn 2+ ) into the perovskite structure. We find that metal-ion DNP provides the highest bulk sensitivity in this case, while highly surface-selective NMR spectra can be acquired using impregnation DNP. The performance of both methods is explained in terms of the relaxation times, particle size, dopant concentration, and surface wettability. We envisage the future use of DNP NMR approaches in establishing structure-activity relationships in inorganic perovskites, especially for mass-limited samples such as thin films., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

The tunable bandgaps and facile fabrication of perovskites make them attractive for multi-junction photovoltaics 1,2 . However, light-induced phase segregation limits their efficiency and stability 3-5 : this occurs in wide-bandgap (>1.65 electron volts) iodide/bromide mixed perovskite absorbers, and becomes even more acute in the top cells of triple-junction solar photovoltaics that require a fully 2.0-electron-volt bandgap absorber 2,6 . Here we report that lattice distortion in iodide/bromide mixed perovskites is correlated with the suppression of phase segregation, generating an increased ion-migration energy barrier arising from the decreased average interatomic distance between the A-site cation and iodide. Using an approximately 2.0-electron-volt rubidium/caesium mixed-cation inorganic perovskite with large lattice distortion in the top subcell, we fabricated all-perovskite triple-junction solar cells and achieved an efficiency of 24.3 per cent (23.3 per cent certified quasi-steady-state efficiency) with an open-circuit voltage of 3.21 volts. This is, to our knowledge, the first reported certified efficiency for perovskite-based triple-junction solar cells. The triple-junction devices retain 80 per cent of their initial efficiency following 420 hours of operation at the maximum power point., (© 2023. The Author(s), under exclusive licence to Springer Nature Limited.)

Formamidinium lead triiodide (FAPbI 3 ) is the leading candidate for single-junction metal-halide perovskite photovoltaics, despite the metastability of this phase. To enhance its ambient-phase stability and produce world-record photovoltaic efficiencies, methylenediammonium dichloride (MDACl 2 ) has been used as an additive in FAPbI 3 . MDA 2+ has been reported as incorporated into the perovskite lattice alongside Cl - . However, the precise function and role of MDA 2+ remain uncertain. Here, we grow FAPbI 3 single crystals from a solution containing MDACl 2 (FAPbI 3 -M). We demonstrate that FAPbI 3 -M crystals are stable against transformation to the photoinactive δ-phase for more than one year under ambient conditions. Critically, we reveal that MDA 2+ is not the direct cause of the enhanced material stability. Instead, MDA 2+ degrades rapidly to produce ammonium and methaniminium, which subsequently oligomerizes to yield hexamethylenetetramine (HMTA). FAPbI 3 crystals grown from a solution containing HMTA (FAPbI 3 -H) replicate the enhanced α-phase stability of FAPbI 3 -M. However, we further determine that HMTA is unstable in the perovskite precursor solution, where reaction with FA + is possible, leading instead to the formation of tetrahydrotriazinium (THTZ-H + ). By a combination of liquid- and solid-state NMR techniques, we show that THTZ-H + is selectively incorporated into the bulk of both FAPbI 3 -M and FAPbI 3 -H at ∼0.5 mol % and infer that this addition is responsible for the improved α-phase stability.

We use the free radical polymerization initiator 4,4'-azobis(cyanovaleric acid) coordinated to the open metal sites of metal-organic frameworks (MOFs) to give rise to highly uniform MOF/polymer hybrids. We demonstrate this strategy on two robust zirconium MOFs (NU-1000 and MOF-808), which are the most effective catalysts for degradation of chemical warfare nerve agents. The resulting hybrid materials maintain their hydrolytic catalytic activity and have substantially improved adhesion to polypropylene and activated carbon textile fibers, yielding highly robust MOF/polymer/textile hybrid systems. These composites are suitable for the green production of active protective clothing and filters capable of detoxifying organophosphorus warfare agents.

Incorporating large organic cations to form 2D and mixed 2D/3D structures significantly increases the stability of perovskite solar cells. However, due to their low electron mobility, aligning the organic sheets to ensure unimpeded charge transport is critical to rival the high performances of pure 3D systems. While additives such as methylammonium chloride (MACl) can enable this preferential orientation, so far, no complete description exists explaining how they influence the nucleation process to grow highly aligned crystals. Here, by investigating the initial stages of the crystallization, as well as partially and fully formed perovskites grown using MACl, the origins underlying this favorable alignment are inferred. This mechanism is studied by employing 3-fluorobenzylammonium in quasi-2D perovskite solar cells. Upon assisting the crystallization with MACl, films with a degree of preferential orientation of 94%, capable of withstanding moisture levels of 97% relative humidity for 10 h without significant changes in the crystal structure are achieved. Finally, by combining macroscopic, microscopic, and spectroscopic studies, the nucleation process leading to highly oriented perovskite films is elucidated. Understanding this mechanism will aid in the rational design of future additives to achieve more defect tolerant and stable perovskite optoelectronics., (© 2022 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Doping of all-inorganic lead halide perovskites to enhance their photovoltaic performance and stability has been reported to be effective. Up to now most studies have focused on the doping of elements in to the perovskite lattice. However, most of them cannot be doped into the perovskite lattice and the roles of these dopants are still controversial. Herein,the authors introduce CdI 2 as an additive into CsPbI 3-x Br x and use it as active layer to fabricate high-performance inorganic perovskite solar cells (PSCs). Cd with a smaller radius than Pb can partially substitute Pb in the perovskite lattice by up to 2 mol%. Meanwhile, the remaining Cd stays on the surface and grain boundaries (GB) of the perovskite film in the form of Cs 2 CdI 4-x Br -x , which is found to reduce non-radiative recombination. These effects result in prolonged charge carrier lifetime, suppressed defect formation, decreased GBs, and an upward shift of energybands in the Cd-containing film. A champion efficiency of 20.8% is achieved for Cd-incorporated PSCs, together with improved device ambient stability. This work highlights the importance of simultaneous lattice engineering, defectcontrol and atomic-level characterization in achieving high-performance inorganic PSCs with well-defined structure-property relationships., (© 2022 The Authors. Advanced Science published by Wiley-VCH GmbH.)

CsPbI 3 is a promising material for optoelectronics owing to its thermal robustness and favorable bandgap. However, its fabrication is challenging because its photoactive phase is thermodynamically unstable at room temperature. Adding dimethylammonium (DMA) alleviates this instability and is currently understood to result in the formation of DMA x Cs 1- x PbI 3 perovskite solid solutions. Here, we use NMR of the 133 Cs and 13 C local structural probes to show that these solid solutions are not thermodynamically stable, and their synthesis under thermodynamic control leads to a segregated mixture of yellow one-dimensional DMAPbI 3 phase and δ-CsPbI 3 . We show that mixed-cation DMA x Cs 1- x PbI 3 perovskite phases only form when they are kinetically trapped by rapid antisolvent-induced crystallization. We explore the energetics of DMA incorporation into CsPbI 3 using first-principles calculations and molecular dynamics simulations and find that this process is energetically unfavorable. Our results provide a complete atomic-level picture of the mechanism of DMA-induced stabilization of the black perovskite phase of CsPbI 3 and shed new light on this deceptively simple material., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Colloidal lead-halide perovskite nanocrystals (LHP NCs) have emerged over the past decade as leading candidates for efficient next-generation optoelectronic devices, but their properties and performance critically depend on how they are purified. While antisolvents are widely used for purification, a detailed understanding of how the polarity of the antisolvent influences the surface chemistry and composition of the NCs is missing in the field. Here, we fill this knowledge gap by studying the surface chemistry of purified CsPbBr x I 3- x NCs as the model system, which in itself is considered a promising candidate for pure-red light-emitting diodes and top-cells for tandem photovoltaics. Interestingly, we find that as the polarity of the antisolvent increases (from methyl acetate to acetone to butanol), there is a blueshift in the photoluminescence (PL) peak of the NCs along with a decrease in PL quantum yield (PLQY). Through transmission electron microscopy and X-ray photoemission spectroscopy measurements, we find that these changes in PL properties arise from antisolvent-induced iodide removal, which leads to a change in halide composition and, thus, the bandgap. Using detailed nuclear magnetic resonance (NMR) and Fourier-transform infrared spectroscopy (FTIR) measurements along with density functional theory calculations, we propose that more polar antisolvents favor the detachment of the oleic acid and oleylamine ligands, which undergo amide condensation reactions, leading to the removal of iodide anions from the NC surface bound to these ligands. This work shows that careful selection of low-polarity antisolvents is a critical part of designing the synthesis of NCs to achieve high PLQYs with minimal defect-mediated phase segregation.

Dion-Jacobson (DJ) iodoplumbates based on 1,4-phenylenedimethanammonium (PDMA) have recently emerged as promising light absorbers for perovskite solar cells. While PDMA is one of the simplest aromatic spacers potentially capable of forming a DJ structure based on (PDMA)A n -1 Pb n composition, the crystallographic proof has not been reported so far. Single crystal structure of a DJ phase based on PDMA is presented and high-field solid-state NMR spectroscopy is used to characterize the structure of PDMA-based iodoplumbates prepared as thin films and bulk microcrystalline powders. It is shown that their atomic-level structure does not depend on the method of synthesis and that it is ordered and similar for all iodoplumbate homologues. Moreover, the presence of lower (n) homologues in thin films is identified through UV-Vis spectroscopy, photoluminescence spectroscopy, and X-ray diffraction measurements, complemented by cathodoluminescence mapping. A closer look using cathodoluminescence shows that the micron-scale microstructure corresponds to a mixture of different layered homologues that are well distributed throughout the film and the presence of layer edge states which dominate the emission. This work therefore determines the formation of DJ phases based on PDMA as the spacer cation and reveals their properties on a multi-length scale, which is relevant for their application in optoelectronics.3 n +1 composition, the crystallographic proof has not been reported so far. Single crystal structure of a DJ phase based on PDMA is presented and high-field solid-state NMR spectroscopy is used to characterize the structure of PDMA-based iodoplumbates prepared as thin films and bulk microcrystalline powders. It is shown that their atomic-level structure does not depend on the method of synthesis and that it is ordered and similar for all iodoplumbate homologues. Moreover, the presence of lower (n) homologues in thin films is identified through UV-Vis spectroscopy, photoluminescence spectroscopy, and X-ray diffraction measurements, complemented by cathodoluminescence mapping. A closer look using cathodoluminescence shows that the micron-scale microstructure corresponds to a mixture of different layered homologues that are well distributed throughout the film and the presence of layer edge states which dominate the emission. This work therefore determines the formation of DJ phases based on PDMA as the spacer cation and reveals their properties on a multi-length scale, which is relevant for their application in optoelectronics., (© 2021 The Authors. Small published by Wiley-VCH GmbH.)

Efforts to stabilize photoactive formamidinium (FA)–based halide perovskites for perovskite photovoltaics have focused on the growth of cubic formamidinium lead iodide (α-FAPbI 3 ) phases by empirically alloying with cesium, methylammonium (MA) cations, or both. We show that such stabilized FA-rich perovskites are noncubic and exhibit ~2° octahedral tilting at room temperature. This tilting, resolvable only with the use of local nanostructure characterization techniques, imparts phase stability by frustrating transitions from photoactive to hexagonal phases. Although the bulk phase appears stable when examined macroscopically, heterogeneous cation distributions allow microscopically unstable regions to form; we found that these transitioned to hexagonal polytypes, leading to local trap-assisted performance losses and photoinstabilities. Using surface-bound ethylenediaminetetraacetic acid, we engineered an octahedral tilt into pure α-FAPbI 3 thin films without any cation alloying. The templated photoactive FAPbI 3 film was extremely stable against thermal, environmental, and light stressors.

Lead-free halides with perovskite-related structures, such as the vacancy-ordered perovskite Cs 3 Bi 2 Br 9 , are of interest for photovoltaic and optoelectronic applications. We find that addition of SnBr 2 to the solution-phase synthesis of Cs 3 Bi 2 Br 9 leads to substitution of up to 7% of the Bi(iii) ions by equal quantities of Sn(ii) and Sn(iv). The nature of the substitutional defects was studied by X-ray diffraction, 133 Cs and 119 Sn solid state NMR, X-ray photoelectron spectroscopy and density functional theory calculations. The resulting mixed-valence compounds show intense visible and near infrared absorption due to intervalence charge transfer, as well as electronic transitions to and from localised Sn-based states within the band gap. Sn(ii) and Sn(iv) defects preferentially occupy neighbouring B-cation sites, forming a double-substitution complex. Unusually for a Sn(ii) compound, the material shows minimal changes in optical and structural properties after 12 months storage in air. Our calculations suggest the stabilisation of Sn(ii) within the double substitution complex contributes to this unusual stability. These results expand upon research on inorganic mixed-valent halides to a new, layered structure, and offer insights into the tuning, doping mechanisms, and structure-property relationships of lead-free vacancy-ordered perovskite structures., Competing Interests: There are no conflicts of interest., (This journal is © The Royal Society of Chemistry.)

Solid-state magic-angle spinning NMR spectroscopy is a powerful technique to probe atomic-level microstructure and structural dynamics in metal halide perovskites. It can be used to measure dopant incorporation, phase segregation, halide mixing, decomposition pathways, passivation mechanisms, short-range and long-range dynamics, and other local properties. This Review describes practical aspects of recording solid-state NMR data on halide perovskites and how these afford unique insights into new compositions, dopants and passivation agents. We discuss the applicability, feasibility and limitations of 1 H, 13 C, 15 N, 14 N, 133 Cs, 87 Rb, 39 K, 207 Pb, 119 Sn, 113 Cd, 209 Bi, 115 In, 19 F and 2 H NMR in typical experimental scenarios. We highlight the pivotal complementary role of solid-state mechanosynthesis, which enables highly sensitive NMR studies by providing large quantities of high-purity materials of arbitrary complexity and of chemical shifts calculated using density functional theory. We examine the broader impact of solid-state NMR on materials research and how its evolution over seven decades has benefitted structural studies of contemporary materials such as halide perovskites. Finally, we summarize some of the open questions in perovskite optoelectronics that could be addressed using solid-state NMR. We, thereby, hope to stimulate wider use of this technique in materials and optoelectronics research., (© 2021. Springer Nature Limited.)

Hybrid-perovskite-based optoelectronic devices are demonstrating unprecedented growth in performance, and defect passivation approaches are highly promising routes to further improve properties. Here, the effect of the molecular ion BF 4 - , introduced via methylammonium tetrafluoroborate (MABF 4 ) in a surface treatment for MAPbI 3 perovskite, is reported. Optical spectroscopy characterization shows that the introduction of tetrafluoroborate leads to reduced non-radiative charge-carrier recombination with a reduction in first-order recombination rate from 6.5 × 10 6 to 2.5 × 10 5 s -1 in BF 4 - -treated samples, and a consequent increase in photoluminescence quantum yield by an order of magnitude (from 0.5 to 10.4%). 19 F, 11 B, and 14 N solid-state NMR is used to elucidate the atomic-level mechanism of the BF 4 - additive-induced improvements, revealing that the BF 4 - acts as a scavenger of excess MAI by forming MAI-MABF 4 cocrystals. This shifts the equilibrium of iodide concentration in the perovskite phase, thereby reducing the concentration of interstitial iodide defects that act as deep traps and non-radiative recombination centers. These collective results allow us to elucidate the microscopic mechanism of action of BF 4 - ., (© 2021 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

The use of layered perovskites is an important strategy to improve the stability of hybrid perovskite materials and their optoelectronic devices. However, tailoring their properties requires accurate structure determination at the atomic scale, which is a challenge for conventional diffraction-based techniques. We demonstrate the use of nuclear magnetic resonance (NMR) crystallography in determining the structure of layered hybrid perovskites for a mixed-spacer model composed of 2-phenylethylammonium (PEA + ) and 2-(perfluorophenyl)ethylammonium (FEA + ) moieties, revealing nanoscale phase segregation. Moreover, we illustrate the application of this structure in perovskite solar cells with power conversion efficiencies that exceed 21%, accompanied by enhanced operational stability.

Optoelectronic devices based on lead halide perovskites are processed in facile ways, yet are remarkably efficient. There are extensive research efforts investigating lead-free perovskite and perovskite-related compounds, yet there are challenges to synthesize these materials in forms that can be directly integrated into thin film devices rather than as bulk powders. Here, we report on the colloidal synthesis and characterization of lead-free, antifluorite Cs 2 ZrX 6 (X = Cl, Br) nanocrystals that are readily processed into thin films. We use transmission electron microscopy and powder X-ray diffraction measurements to determine their size and structural properties, and solid-state nuclear magnetic resonance measurements reveal the presence of oleate ligand, together with a disordered distribution of Cs surface sites. Density functional theory calculations reveal the band structure and fundamental band gaps of 5.06 and 3.91 eV for Cs 2 ZrCl 6 and Cs 2 ZrBr 6 , respectively, consistent with experimental values. Finally, we demonstrate that the Cs 2 ZrCl 6 and Cs 2 ZrBr 6 nanocrystal thin films exhibit tunable, broad white photoluminescence with quantum yields of 45% for the latter, with respective peaks in the blue and green spectral regions and mixed systems exhibiting properties between them. Our work represents a critical step toward the application of lead-free Cs 2 ZrX 6 nanocrystal thin films into next-generation light-emitting applications., Competing Interests: The authors declare no competing financial interest., (© 2020 American Chemical Society.)

All-inorganic double perovskites (elpasolites) are a promising potential alternatives to lead halide perovskites in optoelectronic applications. Although halide mixing is a well-established strategy for band gap tuning, little is known about halide mixing and phase segregation phenomena in double perovskites. Here, we synthesize a wide range of single- and mixed-halide Cs 2 AgBiX 6 (X = Cl, Br, and I) double perovskites using mechanosynthesis and probe their atomic-level microstructure using 133 Cs solid-state MAS NMR. We show that mixed Cl/Br materials form pure phases for any Cl/Br ratio while Cl/I and Br/I mixing is only possible within a narrow range of halide ratios (<3 mol % I) and leads to a complex mixture of products for higher ratios. We characterize the optical properties of the resulting materials and show that halide mixing does not lead to an appreciable tunability of the PL emission. We find that iodide incorporation is particularly pernicious in that it quenches the PL emission intensity and radiative charge carrier lifetimes for iodide ratios as low as 0.3 mol %. Our study shows that solid-state NMR, in conjunction with optical spectroscopies, provides a comprehensive understanding of the structure-activity relationships, halide mixing, and phase segregation phenomena in Cs 2 AgBiX 6 (X = Cl, Br, and I) double perovskites., Competing Interests: The authors declare no competing financial interest.

The development of magic-angle spinning dynamic nuclear polarization (MAS DNP) has allowed atomic-level characterization of materials for which conventional solid-state NMR is impractical due to the lack of sensitivity. The rapid progress of MAS DNP has been largely enabled through the understanding of rational design concepts for more efficient polarizing agents (PAs). Here, we identify a new design principle which has so far been overlooked. We find that the local geometry around the unpaired electron can change the DNP enhancement by an order of magnitude for two otherwise identical conformers. We present a set of 13 new stable mono- and dinitroxide PAs for MAS DNP NMR where this principle is demonstrated. The radicals are divided into two groups of isomers, named open (O-) and closed (C-), based on the ring conformations in the vicinity of the N-O bond. In all cases, the open conformers exhibit dramatically improved DNP performance as compared to the closed counterparts. In particular, a new urea-based biradical named HydrOPol and a mononitroxide O-MbPyTol yield enhancements of 330 ± 60 and 119 ± 25, respectively, at 9.4 T and 100 K, which are the highest enhancements reported so far in the aqueous solvents used here. We find that while the conformational changes do not significantly affect electron spin-spin distances, they do affect the distribution of the exchange couplings in these biradicals. Electron spin echo envelope modulation (ESEEM) experiments suggest that the improved performance of the open conformers is correlated with higher solvent accessibility.

Identifying and characterizing systems that generate well-defined states with large electron spin polarization is of high interest for applications in molecular spintronics, high-energy physics, and magnetic resonance spectroscopy. The generation of electron spin polarization on free-radical substituents tethered to pentacene derivatives has recently gained a great deal of interest for its applications in molecular electronics. After photoexcitation of the chromophore, pentacene-radical derivatives can rapidly form spin-polarized triplet excited states through enhanced intersystem crossing. Under the right conditions, the triplet spin polarization, arising from m S -selective intersystem crossing rates, can be transferred to the tethered stable radical. The efficiency of this spin polarization transfer depends on many factors: local magnetic and electric fields, excited-state energetics, molecular geometry, and spin-spin coupling. Here, we present transient electron paramagnetic resonance (EPR) measurements on three pentacene derivatives tethered to Finland trityl, BDPA, or TEMPO radicals to explore the influence of the nature of the radical on the spin polarization transfer. We observe efficient polarization transfer between the pentacene excited triplet and the trityl radical but do not observe the same for the BDPA and TEMPO derivatives. The polarization transfer behavior in the pentacene-trityl system is also investigated in different glassy matrices and is found to depend markedly on the solvent used. The EPR results are rationalized with the help of femtosecond and nanosecond transient absorption measurements, yielding complementary information on the excited-state dynamics of the three pentacene derivatives. Notably, we observe a 2 orders of magnitude difference in the time scale of triplet formation between the pentacene-trityl system and the pentacene systems tethered with the BDPA and TEMPO radicals.

Organic-inorganic tin(II) halide perovskites have emerged as promising alternatives to lead halide perovskites in optoelectronic applications. While they suffer from considerably poorer performance and stability in comparison to their lead analogues, their performance improvements have so far largely been driven by trial and error efforts due to a critical lack of methods to probe their atomic-level microstructure. Here, we identify the challenges and devise a 119 Sn solid-state NMR protocol for the determination of the local structure of mixed-cation and mixed-halide tin(II) halide perovskites as well as their degradation products and related phases. We establish that the longitudinal relaxation of 119 Sn can span 6 orders of magnitude in this class of compounds, which makes judicious choice of experimental NMR parameters essential for the reliable detection of various phases. We show that Cl/Br and I/Br mixed-halide perovskites form solid alloys in any ratio, while only limited mixing is possible for I/Cl compositions. We elucidate the degradation pathways of Cs-, MA-, and FA-based tin(II) halides and show that degradation leads to highly disordered, qualitatively similar products, regardless of the A-site cation and halide. We detect the presence of metallic tin among the degradation products, which we suggest could contribute to the previously reported high conductivities in tin(II) halide perovskites. 119 Sn NMR chemical shifts are a sensitive probe of the halide coordination environment as well as of the A-site cation composition. Finally, we use variable-temperature multifield relaxation measurements to quantify ion dynamics in MASnBr 3 and establish activation energies for motion and show that this motion leads to spontaneous halide homogenization at room temperature whenever two different pure-halide perovskites are put in physical contact.

Formamidinium (FA) lead iodide perovskite materials feature promising photovoltaic performances and superior thermal stabilities. However, conversion of the perovskite α-FAPbI 3 phase to the thermodynamically stable yet photovoltaically inactive δ-FAPbI 3 phase compromises the photovoltaic performance. A strategy is presented to address this challenge by using low-dimensional hybrid perovskite materials comprising guaninium (G) organic spacer layers that act as stabilizers of the three-dimensional α-FAPbI 3 phase. The underlying mode of interaction at the atomic level is unraveled by means of solid-state nuclear magnetic resonance spectroscopy, X-ray crystallography, transmission electron microscopy, molecular dynamics simulations, and DFT calculations. Low-dimensional-phase-containing hybrid FAPbI 3 perovskite solar cells are obtained with improved performance and enhanced long-term stability., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

There has been an ongoing effort to overcome the limitations associated with the stability of hybrid organic-inorganic perovskite solar cells by using different organic agents as additives to the perovskite formulations. The functionality of organic additives has been predominantly limited to exploiting hydrogen-bonding interactions, while the relevant atomic-level binding modes remain elusive. Herein, we introduce a bifunctional supramolecular modulator, 1,2,4,5-tetrafluoro-3,6-diiodobenzene, which interacts with the surface of the triple-cation double-halide perovskite material via halogen bonding. We elucidate its binding mode using two-dimensional solid-state 19 F NMR spectroscopy in conjunction with density functional theory calculations. As a result, we demonstrate a stability enhancement of the perovskite solar cells upon supramolecular modulation, without compromising the photovoltaic performances.

Chemical doping of inorganic-organic hybrid perovskites is an effective way of improving the performance and operational stability of perovskite solar cells (PSCs). Here we use 5-ammonium valeric acid iodide (AVAI) to chemically stabilize the structure of α-FAPbI 3 . Using solid-state MAS NMR, we demonstrate the atomic-level interaction between the molecular modulator and the perovskite lattice and propose a structural model of the stabilized three-dimensional structure, further aided by density functional theory (DFT) calculations. We find that one-step deposition of the perovskite in the presence of AVAI produces highly crystalline films with large, micrometer-sized grains and enhanced charge-carrier lifetimes, as probed by transient absorption spectroscopy. As a result, we achieve greatly enhanced solar cell performance for the optimized AVA-based devices with a maximum power conversion efficiency (PCE) of 18.94%. The devices retain 90% of the initial efficiency after 300 h under continuous white light illumination and maximum-power point-tracking measurement.

All-inorganic metal halide perovskites are showing promising development towards efficient long-term stable materials and solar cells. Element doping, especially on the lead site, has been proved to be a useful strategy to obtain the desired film quality and material phase for high efficient and stable inorganic perovskite solar cells. Here we demonstrate a function by adding barium in CsPbI 2 Br. We find that barium is not incorporated into the perovskite lattice but induces phase segregation, resulting in a change in the iodide/bromide ratio compared with the precursor stoichiometry and consequently a reduction in the band gap energy of the perovskite phase. The device with 20 mol% barium shows a high power conversion efficiency of 14.0% and a great suppression of non-radiative recombination within the inorganic perovskite, yielding a high open-circuit voltage of 1.33 V and an external quantum efficiency of electroluminescence of 10 -4 .

The high conversion efficiency has made metal halide perovskite solar cells a real breakthrough in thin film photovoltaic technology in recent years. Here, we introduce a straightforward strategy to reduce the level of electronic defects present at the interface between the perovskite film and the hole transport layer by treating the perovskite surface with different types of ammonium salts, namely ethylammonium, imidazolium and guanidinium iodide. We use a triple cation perovskite formulation containing primarily formamidinium and small amounts of cesium and methylammonium. We find that this treatment boosts the power conversion efficiency from 20.5% for the control to 22.3%, 22.1%, and 21.0% for the devices treated with ethylammonium, imidazolium and guanidinium iodide, respectively. Best performing devices showed a loss in efficiency of only 5% under full sunlight intensity with maximum power tracking for 550 h. We apply 2D- solid-state NMR to unravel the atomic-level mechanism of this passivation effect.

Gadolinium(III) complexes have recently been demonstrated to have potential as polarizing agents for high-field dynamic nuclear polarization (DNP) NMR spectroscopy. By tailoring the ligand design to reduce the zero-field splitting (ZFS), we demonstrate a quadratic improvement in DNP through the investigation of a stable, water-soluble, narrow-line Gd(III) complex, [Gd(tpatcn)], doubling the magic-angle-spinning DNP enhancement of the previous state-of-the-art [Gd(dota)(H 2 O)] - at 9.4 T and 100 K.

The introduction of high-frequency, high-power microwave sources, tailored biradicals, and low-temperature magic angle spinning (MAS) probes has led to a rapid development of hyperpolarization strategies for solids and frozen solutions, leading to large gains in NMR sensitivity. Here, we introduce a protocol for efficient hyperpolarization of 19 F nuclei in MAS DNP enhanced NMR spectroscopy. We identified trifluoroethanol-d 3 as a versatile glassy matrix and show that 12 mm AMUPol (with microcrystalline KBr) provides direct 19 F DNP enhancements of over 100 at 9.4 T. We applied this protocol to obtain DNP-enhanced 19 F and 19 F- 13 C cross-polarization (CP) spectra for an active pharmaceutical ingredient and a fluorinated mesostructured hybrid material, using incipient wetness impregnation, with enhancements of approximately 25 and 10 in the bulk solid, respectively. This strategy is a general and straightforward method for obtaining enhanced 19 F MAS spectra from fluorinated materials., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Hybrid organic-inorganic perovskites have become one of the leading thin-film semiconductors for optoelectronics. Their broad application will greatly depend on overcoming the key obstacles associated with poor stability and limited scalability. There has been an ongoing effort to diminish some of these limitations by using organic additives. However, considering the lack of understanding of the underlying structure-property relationships, this progress was greatly based on trial and error as molecular-level design remains challenging. Our approach for enhancing the stability of hybrid perovskites without compromising their efficiency is based on judicious molecular design of multifunctional molecular modulators through fine-tuning of noncovalent interactions and exploiting their structural adaptability. The design principles were scrutinized by solid-state NMR spectroscopy to unravel a new path for stable and scalable perovskite solar cells, which we review in this article.

Perovskite solar cells present one of the most prominent photovoltaic technologies, yet their stability, scalability, and engineering at the molecular level remain challenging. We demonstrate a concept of multifunctional molecular modulation of scalable and operationally stable perovskite solar cells that exhibit exceptional solar-to-electric power conversion efficiencies. The judiciously designed bifunctional molecular modulator SN links the mercapto-tetrazolium (S) and phenylammonium (N) moieties, which passivate the surface defects, while displaying a structure-directing function through interaction with the perovskite that induces the formation of large grain crystals of high electronic quality of the most thermally stable formamidinium cesium mixed lead iodide perovskite formulation. As a result, we achieve greatly enhanced solar cell performance with efficiencies exceeding 20% for active device areas above 1 cm 2 without the use of antisolvents, accompanied by outstanding operational stability under ambient conditions.

Organic-inorganic lead halide perovskites are a promising family of light absorbers for a new generation of solar cells, with reported efficiencies currently exceeding 22%. A common problem of solar cells fabricated using these materials is that their efficiency depends on their cycling history, an effect known as current-voltage ( J- V) hysteresis. Potassium doping has recently emerged as a universal way to overcome this adverse phenomenon. While the atomistic origins of J- V hysteresis are still not fully understood, it is essential to rationalize the atomic-level effect of protocols that lead to its suppression. Here, using 39 K MAS NMR at 21.1 T we provide for the first time atomic-level characterization of the potassium-containing phases that are formed upon KI doping of multication and multianion lead halide perovskites. We find no evidence of potassium incorporation into 3D perovskite lattices of the recently reported materials. Instead, we observe formation of a mixture of potassium-rich phases and unreacted KI. In the case of Br-containing lead halide perovskites doped with KI, a mixture of KI and KBr ensues, leading to a change in the Br/I ratio in the perovskite phase with respect to the undoped perovskite. Simultaneous Cs and K doping leads to the formation of nonperovskite Cs/K lead iodide phases.

Methylammonium (MA)- and formamidinium (FA)-based organic-inorganic lead halide perovskites provide outstanding performance as photovoltaic materials, due to their versatility of fabrication and their power conversion efficiencies reaching over 22%. The proposition of guanidinium (GUA)-doped perovskite materials generated considerable interest due to their potential to increase carrier lifetimes and open-circuit voltages as compared to pure MAPbI 3 . However, simple size considerations based on the Goldschmidt tolerance factor suggest that guanidinium is too big to completely replace methylammonium as an A cation in the APbI 3 perovskite lattice, and its effect was thus ascribed to passivation of surface trap states at grain boundaries. As guanidinium was not thought to incorporate into the MAPbI 3 lattice, interest waned since it appeared unlikely that it could be used to modify the intrinsic perovskite properties. Here, using solid-state NMR, we provide for the first time atomic-level evidence that GUA is directly incorporated into the MAPbI 3 and FAPbI 3 lattices, forming pure GUA x MA 1- x PbI 3 or GUA x FA 1- x PbI 3 phases, and that it reorients on the picosecond time scale within the perovskite lattice, which explains its superior charge carrier stabilization capacity. Our findings establish a fundamental link between charge carrier lifetimes observed in photovoltaic perovskites and the A cation structure in ABX 3 -type metal halide perovskites.

Hybrid (organic-inorganic) multication lead halide perovskites hold promise for a new generation of easily processable solar cells. Best performing compositions to date are multiple-cation solid alloys of formamidinium (FA), methylammonium (MA), cesium, and rubidium lead halides which provide power conversion efficiencies up to around 22%. Here, we elucidate the atomic-level nature of Cs and Rb incorporation into the perovskite lattice of FA-based materials. We use 133 Cs, 87 Rb, 39 K, 13 C, and 14 N solid-state MAS NMR to probe microscopic composition of Cs-, Rb-, K-, MA-, and FA-containing phases in double-, triple-, and quadruple-cation lead halides in bulk and in a thin film. Contrary to previous reports, we have found no proof of Rb or K incorporation into the 3D perovskite lattice in these systems. We also show that the structure of bulk mechanochemical perovskites bears close resemblance to that of thin films, making them a good benchmark for structural studies. These findings provide fundamental understanding of previously reported excellent photovoltaic parameters in these systems and their superior stability.

Mixed-cation organic lead halide perovskites attract unfaltering attention owing to their excellent photovoltaic properties. Currently, the best performing perovskite materials contain multiple cations and provide power conversion efficiencies up to around 22%. Here, we report the first quantitative, cation-specific data on cation reorientation dynamics in hybrid mixed-cation formamidinium (FA)/methylammonium (MA) lead halide perovskites. We use 14 N, 2 H, 13 C, and 1 H solid-state MAS NMR to elucidate cation reorientation dynamics, microscopic phase composition, and the MA/FA ratio, in (MA) x (FA) 1-x PbI 3 between 100 and 330 K. The reorientation rates correlate in a striking manner with the carrier lifetimes previously reported for these materials and provide evidence of the polaronic nature of charge carriers in PV perovskites.

We review our recent efforts to optimize the efficiency of polarizing agents for Dynamic Nuclear Polarization (DNP) in solid-state MAS NMR spectroscopy. We elucidate the links between DNP performance, molecular structure and electronic relaxation properties of dinitroxide biradicals. We show that deuteration and increased bulkiness lead to slower electronic relaxation and in turn to higher DNP enhancements. We also show that the incorporation of solid dielectric particles into the sample is a general method of amplifying DNP enhancements by about a factor of two.

A series of 37 dinitroxide biradicals have been prepared and their performance studied as polarizing agents in cross-effect DNP NMR experiments at 9.4 T and 100 K in 1,1,2,2-tetrachloroethane (TCE). We observe that in this regime the DNP performance is strongly correlated with the substituents on the polarizing agents, and electron and nuclear spin relaxation times, with longer relaxation times leading to better enhancements. We also observe that deuteration of the radicals generally leads to better DNP enhancement but with longer build-up time. One of the new radicals introduced here provides the best performance obtained so far under these conditions.

There is currently great interest in understanding the limits on NMR signal enhancements provided by dynamic nuclear polarization (DNP), and in particular if the theoretical maximum enhancements can be achieved. We show that over a 2-fold improvement in cross-effect DNP enhancements can be achieved in MAS experiments on frozen solutions by simply incorporating solid particles into the sample. At 9.4 T and ∼105 K, enhancements up to εH = 515 are obtained in this way, corresponding to 78% of the theoretical maximum. We also underline that degassing of the sample is important to achieve highest enhancements. We link the amplification effect to the dielectric properties of the solid material, which probably gives rise to scattering, diffraction, and amplification of the microwave field in the sample. This is substantiated by simulations of microwave propagation. A reduction in sample heating at a given microwave power also likely occurs due to reduced dielectric loss. Simulations indicate that the microwave field (and thus the DNP enhancement) is inhomogeneous in the sample, and we deduce that in these experiments between 5 and 10% of the solution actually yields the theoretical maximum signal enhancement of 658. The effect is demonstrated for a variety of particles added to both aqueous and organic biradical solutions.