Search

Vibrational spectroscopic techniques, such as Raman spectroscopy, as a non-destructive method combined with machine learning (ML), were successfully tested as a quick method of plasticizer identification in poly(vinyl chloride) - PVC objects in heritage collection. ML algorithms such as Convolutional Neural Network (CNN), Random Forest (RF), Support Vector Machines (SVM), and Linear Discriminant Analysis (LDA) were applied to the classification and identification of the most common plasticizers used in the case of PVC. The CNN model was able to successfully classify the five plasticizers under study from their Raman spectra with a high accuracy of (98%), whereas the highest accuracy (100%) was observed with the RF algorithm. The finding opens doors for the development of robust and economical tools for conservators and museum professionals for fast identification of materials in heritage collections., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

A diradical/biradical character of organic derivatives is one of the key aspects of contemporary research focusing on the fundamental studies followed by potential applicability relying on the unique optical, electronic, or magnetic properties assigned to unpaired electrons. A precise involvement of two p-phenylenes into a cyclophane-like conjugated, diatropic system creates a flexible molecule with the two different characters of both subunits (benzene and quinone) imprinting into the structure a Kekulé delocalized system. A dynamic of both carbocyclic subunits, and their mutual interaction generates a singlet open-shell state (J=-1.25 kcal/mol) as documented spectroscopically (NMR and EPR). The extended theoretical analysis has proved a correlation between dihedral angle and the diradicaloid character that shifts from a closed-shell singlet to an open-shell state, eventually showing the y 0 =0.86 for 78 degrees and ΔE ST =-0.34 kcal/mol., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Surface modification of heterogeneous photocatalysts with single-atom catalysts (SACs) is an attractive approach for achieving enhanced photocatalytic performance. However, there is limited knowledge of the mechanism of photocatalytic enhancement in SAC-modified photocatalysts, which makes the rational design of high-performance SAC-based photocatalysts challenging. Herein, a series of photocatalysts for the aerobic degradation of pollutants based on anatase TiO 2 modified with various low-cost, non-noble SACs (vanadate, Cu, and Fe ions) is reported. The most active SAC-modified photocatalysts outperform TiO 2 modified with the corresponding metal oxide nanoparticles and state-of-the-art benchmark photocatalysts such as platinized TiO 2 and commercial P25 powders. A combination of in situ electron paramagnetic resonance spectroscopy and theoretical calculations reveal that the best-performing photocatalysts modified with Cu(II) and vanadate SACs exhibit significant differences in the mechanism of activity enhancement, particularly with respect to the rate of oxygen reduction. The superior performance of vanadate SAC-modified TiO 2 is found to be related to the shallow character of the SAC-induced intragap states, which allows for both the effective extraction of photogenerated electrons and fast catalytic turnover in the reduction of dioxygen, which translates directly into diminished recombination. These results provide essential guidelines for developing efficient SAC-based photocatalysts., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Starch is a common biopolymer that can be used for removing heavy metal ions from aqueous solutions. A valuable property of starch is its functional diversity, which can be enhanced by chemical modification. Hydroxyl groups enclosed in the starch and formed during hydrolysis act as reducing agents of Cr(VI). The sorption properties of native starch depend mainly on the presence of carboxyl groups formed during redox processes and basic centers created during acid hydrolysis, while the superiority of phosphorylated starch is related to the presence of phosphate groups binding Cr(III) ions. The effectiveness of starch depends on a series of equilibria established in its aqueous suspension and chromate ions solution, where the pH is the driving force for these processes. In this article, a systematic discussion of pH changes being the consequence of chemical reactions unraveling the extraordinary functionalities of starch was given. It also explained the influence of establishing equilibria and chemical modifications of starch on the efficiency of chromium ion removal. This allowed for the development of a comprehensive mechanism for the interaction of Cr(VI) and Cr(III) ions with native and phosphorylated starch.

Surface-modified graphite is studied as an electrode material, an adsorbent, and a membrane component, among other applications. Modifying the graphite with plasma can be used to create relevant surface functionalities, in particular, various oxygen groups. The application of surface-oxidized graphite often requires its use in an aqueous environment. The application in an aqueous environment is not an issue for acid-oxidized carbons, but a discrepancy in the structure-activity relationship may arise because plasma-oxidized carbons show a time-dependent decrease in the degree of functionalization and related properties. Moreover, plasma-oxidized materials are often characterized in terms of their chemical and physical properties, most notably their degree of functionalization after plasma treatment, without contact with water. In this study, we used low-temperature plasma oxidation with pure oxygen and carbon dioxide and sample-washing with concentrated nitric and sulfuric acids. To evaluate the electronic properties of modified graphite, the work function changes and surface oxygen content were measured just after plasma modification and after water immersion. We show that water immersion drastically decreases the work function of plasma-treated samples, which is accompanied by a decrease in the number of radicals introduced by plasma. Our results demonstrate that the increase in stable work function as a result of plasma treatment, brought about by an increase in the surface oxygen species concentration, can be realized most effectively for the acid-washed graphite.

The 10 ion-pairs of [W(CN) 8 ] 4- with substituted Hphen and H n bpy n + (where phen = 1,10-phenantroline, bpy = 2,2'-bipyridine, n = 1 or 2) were isolated and the spectroscopic properties of these salts are discussed. Three salts with dimethyl-substituted H n bpy n + cation were structurally characterized. In the structure of the salt with H 2 bpy, one of the cyanido ligands of the anion is in the CNH form. This situation is very unique, as well as the formation of two water double bridges by water molecules in [W(CN) 8 ] 4- . The formulas of other compounds were determined based on the IR spectra, thermogravimetry, and elemental analyses. The ion-pair formation was accompanied not only by anion-cation charge-transfer bands in the visible part of the electronic spectra, but also low-energy bands above 1000 nm were found and are related to the thermal electron transfer; the amount of the paramagnetic W V was determined by EPR measurement. The thermal excitation of electrons may indicate the possibility of using these compounds as semiconductors. Finally, the improved method of K 4 [W(CN) 8 ]·2H 2 O synthesis is also described.

Solution-based syntheses are omnipresent in chemistry but are often associated with obvious disadvantages, and the search for new mild and green synthetic methods continues to be a hot topic. Here, comparative studies in four different reaction media were conducted, that is, the solid-state mechano- and slow-chemistry synthesis, melted phase, and solution protocols, and the impact of the employed solvent-free solid-state versus liquid-phase synthetic approaches was highlighted on a pool of products. A moderately exothermic model reaction system was chosen based on bis(pentafluorophenyl)zinc, (C 6 F 5 ) 2 Zn, and 2,2,6,6-tetramethylpiperidinyl oxide (TEMPO) as a stable nitroxyl radical, anticipating that these reagents may offer a unique landscape for addressing kinetic and thermodynamic aspects of wet and solvent-free solid-state processes. In a toluene solution two distinct paramagnetic Lewis acid-base adducts (C 6 F 5 ) 2 Zn(η 1 -TEMPO) (1) and (C 6 F 5 ) 2 Zn(η 1 -TEMPO) 2 (2) equilibrated, but only 2 was affordable by crystallization. In turn, crystallization from the melt was the only method yielding single crystals of 1. Moreover, the solid-state approaches were stoichiometry sensitive and allowed for the selective synthesis of both adducts by simple stoichiometric control over the substrates. Density functional theory (DFT) calculations were carried out to examine selected structural and thermodynamic features of the adducts 1 and 2. Compound 2 is a unique non-redox active metal complex supported by two nitroxide radicals, and the magnetic studies revealed weak-to-moderate intramolecular antiferromagnetic interactions between the two coordinated TEMPO molecules., (© 2021 Wiley-VCH GmbH.)

One of the practical efforts in the development of oxygen reduction reaction (ORR) catalysts applicable to fuel cells and metal-air batteries is focused on reducing the cost of the catalysts production. Herein, we have examined the ORR performance of cheap, non-noble metal based catalysts comprised of nanosized mixed Fe-Co spinels deposited on N,S-doped mesoporous carbon support (N,S-MPC). The effect of the chemical and phase composition of the active phase on the selectivity of catalysts in the ORR process in alkaline media was elucidated by changing the iron content. The synthesized materials were thoroughly characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and Raman spectroscopy (RS). Detailed S/TEM/EDX and Raman analysis of the phase composition of the synthesized ORR catalysts revealed that the dominant mixed iron-cobalt spinel is accompanied by minor fractions of bare cobalt and highly dispersed spurious iron oxides (Fe 2 O 3 and Fe 3 O 4 ). The contribution of individual phases and their degree of agglomeration on the carbon support directly influence the selectivity of the obtained catalysts. It was found that the mixed iron-cobalt spinel single phase gives rise to significant improvement of the catalyst selectivity towards the desired 4e - reaction pathway, in comparison to the reference bare cobalt spinel, whereas spurious iron oxides play a negative role for the catalyst selectivity.

In this paper we present a study on stable radicals and short-lived species generated in anion-exchange membrane (AEM) fuel cells (AEMFCs) during operation. The in situ measurements are performed with a micro-AEMFC inserted into a resonator of an electron paramagnetic resonance (EPR) spectrometer, which enables separate monitoring of radicals formed on the anode and cathode sides. The creation of radicals is monitored by the EPR spin trapping technique. For the first time, we clearly show the formation and presence of stable radicals in AEMs during and after long-term AEMFC operation. The main detected adducts during the operation of the micro-AEMFC are DMPO-OOH and DMPO-OH on the cathode side, and DMPO-H on the anode side. These results indicate that oxidative degradation involving radical reactions has to be taken into account when stability of AEMFCs is investigated.

The unique physicochemical properties and biocompatibility of zinc oxide nanocrystals (ZnO NCs) are strongly dependent on the nanocrystal/ligand interface, which is largely determined by synthetic procedures. Stable ZnO NCs coated with a densely packed shell of 2-(2-methoxyethoxy)acetate ligands, which act as miniPEG prototypes, with average core size and hydrodynamic diameter of 4-5 and about 12 nm, respectively, were prepared by an organometallic self-supporting approach, fully characterized, and used as a model system for biological studies. The ZnO NCs from the one-pot, self-supporting organometallic procedure exhibit unique physicochemical properties such as relatively high quantum yield (up to 28 %), ultralong photoluminescence decay (up to 2.1 μs), and EPR silence under standard conditions. The cytotoxicity of the resulting ZnO NCs toward normal (MRC-5) and cancer (A549) human lung cell lines was tested by MTT assay, which demonstrated that these brightly luminescent, quantum-sized ZnO NCs have a low negative impact on mammalian cell lines. These results substantiate that the self-supporting organometallic approach is a highly promising method to obtain high-quality, nontoxic, ligand-coated ZnO NCs with prospective biomedical applications., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Grain polysaccharides represent potential valuable raw materials for next-generation advanced and environmentally friendly plastics. Thermoplastic starch (TPS) is processed using conventional plastic technology, such as casting, extrusion, and molding. However, to adapt the starch to specific functionalities chemical modifications or blending with synthetic polymers, such as polycaprolactone are required (e.g. Mater-Bi). As an alternative, all-natural and compostable bio-plastics can be produced by blending starch with other polysaccharides. In this study, we used a maize starch (ST) and an oat β-glucan (BG) composite system to produce bio-plastic prototype films. To optimize performing conditions, we investigated the full range of ST:BG ratios for the casting (100:0, 75:25, 50:50, 25:75 and 0:100 BG). The plasticizer used was glycerol. Electron Paramagnetic Resonance (EPR), using TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl) as a spin probe, showed that the composite films with high BG content had a flexible chemical environment. They showed decreased brittleness and improved cohesiveness with high stress and strain values at the break. Wide-angle X-ray diffraction displayed a decrease in crystallinity at high BG content. Our data show that the blending of starch with other natural polysaccharides is a noteworthy path to improve the functionality of all-natural polysaccharide bio-plastics systems., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

In this study, interactions of dichromate ions with potato starch granules in highly acidic aqueous solutions and at different temperatures were investigated. It was found that the process underwent a reduction of Cr(2)O(7)(2-) to Cr(3+) accompanied by the formation of intermediate Cr(5+) ions detected by electron paramagnetic resonance (EPR) spectroscopy. The reactions took place after the attachment of dichromate anions to the granules and resulted in a lowering of the Cr(2)O(7)(2-) initial content in the solution. The newly formed Cr(3+) ions were both accumulated by the granules or remained in the solution. It was observed for the first time that the quantity of such ions taken by the granules from the solution was noticeably higher than that delivered by trivalent chromium salt solution. It was revealed by scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDX) that the chromium ions were not only adsorbed on the granule surface but also introduced into the granule interior and evenly distributed there. An activation energy of the reduction reaction equal to 65 kJ·mol(-1) and the optimal parameters of the process were established. The proposed mechanism could be useful for the bioremediation of industrial effluents polluted by hexavalent chromium compounds.

In this paper we report the synthesis and the structural and magnetic properties of the series of ionic compounds with general formula: M(I)[Co(bpy)(3)][Mo(CN)(8)] x nH(2)O (M(I) = Li, n = 8 (1), M(I) = K, n = 8 (2), M(I) = Rb, n = 8 (3), M(I) = Cs, n = 7.5 (4)). Solids 1-4 are characterized by the optical outer-sphere metal-to-metal charge transfer (MMCT) transition from Mo(IV) center to Co(III) center in the visible region and the Co(III)Mo(IV) <==> Co(II)Mo(V) spin equilibrium strongly dominated by the Co(III)Mo(IV) form. We show a gentle thermal treatment of diamagnetic compounds 1-4 leading to the dehydrated forms 1a-4a, which reveal a significant increase of paramagnetic contribution (from 0.5 to 2% to 30-40%). The rehydration allows to recover the diamagnetic phases 1b-4b of compositions and properties similar to those of 1-4. The irradiation of the dehydrated form 2a within the MMCT band in the Superconducting Quantum Interference Device (SQUID) cavity at T = 10 K causes further increase of the Co(II)Mo(V) contribution giving the metastable phase annealed back to the 2a phase after heating above T = 290 K. The IR, electron paramagnetic resonance (EPR), and X-ray photoelectron spectroscopy (XPS) spectroscopic data along with the magnetic data are interpreted in terms of strong modification of the Co(III)Mo(IV) <==> Co(II)Mo(V) equilibrium occurring in these systems.

The research was focused on synthesis of proton conductive, easily degradable polymer membranes, which can be used as a model system to verify the efficiency of transition metal ions (TMI) in prevention of polymer degradation. Two polymers composed of 2-hydroxyethyl methacrylate (HEMA), 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS), and styrenesulfonic acid (SS) were synthesized. The copolymers were characterized by gel permeation chromatography (GPC), elementary analysis, and FTIR and fluorescence spectroscopies. The results allowed determination of weight-average molecular weight and the copolymer composition. The protons of sulfonic groups were substituted by paramagnetic transition metal ions of various spin states (Cr(3+), S=3/2 and Mn(2+), S=5/2) with the loading varying from 0.5 up to 10 mol%. The effectiveness of spin catalysis was checked by EPR. The results obtained indicate enhancement of polymer stability in the presence of Mn(2+).

Application of the genetic algorithm (GA) in conjunction with the concept of virtual components (VC) to determine 1D concentration profiles from EPRI spectra (images) is described. In this approach the concentration profile is expressed as the superposition of virtual components described by analytical functions of the Gaussian and Boltzmann type. The method was implemented in the computer program ACon, which allows for fully automated profile extraction via the nonlinear least-squares fitting of experimental images. The parametric sensitivity of the GA internal parameters such as population size, probabilities of the crossover, mutation and elitist retention to the search space was investigated in detail in order to find their optimal settings. The customized genetic algorithm was evaluated using simulated and experimental test data sets and its performance was compared with the Monte Carlo approach.