Search

In general, large solar flares are more efficient at accelerating high-energy electrons than microflares. Nonetheless, we sometimes observe microflares that accelerate electrons to high energies. We statistically characterize 39 microflares with strikingly hard spectra in the hard X-ray (HXR) range, which means that they are efficient in accelerating high-energy electrons. We refer to these events as "hard microflares." The statistical analysis is built upon spectral and imaging information from STIX, combined with EUV and magnetic field maps from SDO. The key observational result is that all hard microflares in this dataset have one of the footpoints rooted directly within a sunspot (either in the umbra or the penumbra). This clearly indicates that the underlying magnetic flux densities are large. For the events with the classic two-footpoints morphology, the absolute value of the mean line-of-sight magnetic flux density (and vector magnetic field strength) at the footpoint rooted within the sunspot ranges from 600 to 1800 G (1500 to 2500 G), whereas the outer footpoint measures from 10 to 200 G (100 to 400 G), therefore about 10 times weaker. Approximately 78% of hard microflares, which exhibited two HXR footpoints, have similar or even stronger HXR flux from the footpoint rooted within the sunspot. This contradicts the magnetic mirroring scenario. In addition, about 74% of the events could be approximated by a single loop geometry, demonstrating that hard microflares typically have a relatively simple morphology. We conclude that all hard microflares are rooted in sunspots, which implies that the magnetic field strength plays a key role in efficiently accelerating high-energy electrons, with hard HXR spectra associated with strong fields. This key result will allow us to further constrain our understanding of the electron acceleration mechanisms in flares and space plasmas., Comment: Accepted for publication in A&A. 16 pages, 11 figures

We present the first joint spectral and imaging analysis of hard X-ray (HXR) emission from 3 microflares observed by the Nuclear Spectroscopic Telescope ARray (NuSTAR) and Solar Orbiter/Spectrometer/Telescope for Imaging X-rays (STIX). We studied 5 joint spectra from GOES A7, B1 and B6 class microflares from active region AR12765 on 2020 June 6 and 7. As these events are very bright for NuSTAR, resulting in extremely low (<1%) livetime, we introduce a pile-up correction method. All five joint spectra were fitted with an isothermal model finding temperatures in the 9-11 MK range. Furthermore, three joint spectra required an additional non-thermal thick-target model finding non-thermal powers of $10^{25}$-$10^{26}$ erg s$^{-1}$. All the fit parameters were within the ranges expected for HXR microflares. The fit results give a relative scaling of STIX and NuSTAR mostly between 6-28% (one outlier at 52%) suggesting each instrument are well calibrated. In addition to spectral analysis, we performed joint HXR imaging of the June 6 and one of the June 7 microflares. In NuSTAR's field of view (FOV), we observed two separate non-thermal sources connected by an elongated thermal source during the June 6 microflares. In STIX's FOV (44 degrees W with respect to NuSTAR), we imaged thermal emission from the hot flare loops which when reprojected to an Earth viewpoint matches the thermal sources seen with NuSTAR and in the hotter EUV channels with the Solar Dynamic Observatory's Atmospheric Imaging Assembly.

The Spectrometer/Telescope for Imaging X-rays (STIX) on-board the ESA Solar Orbiter mission retrieves the coordinates of solar flare locations by means of a specific sub-collimator, named the Coarse Flare Locator (CFL). When a solar flare occurs on the Sun, the emitted X-ray radiation casts the shadow of a peculiar "H-shaped" tungsten grid over the CFL X-ray detector. From measurements of the areas of the detector that are illuminated by the X-ray radiation, it is possible to retrieve the $(x,y)$ coordinates of the flare location on the solar disk. In this paper, we train a neural network on a dataset of real CFL observations to estimate the coordinates of solar flare locations. Further, we apply a post-training quantization technique specifically tailored to the adopted model architecture. This technique allows all computations to be in integer arithmetic at inference time, making the model compatible with the STIX computational requirements. We show that our model outperforms the currently adopted algorithm for estimating the flare locations from CFL data regarding prediction accuracy while requiring fewer parameters. We finally discuss possible future applications of the proposed model on-board STIX., Comment: Conference paper accepted for an poster presentation to the ESA SPAICE CONFERENCE 17 19 September 2024

Solar eruptive events, including solar flares and coronal mass ejections (CMEs), are typically characterised by energetically significant X-ray emissions from flare-accelerated electrons and hot thermal plasmas. Occulted events, where the main flare is blocked by the solar limb, provide an opportunity to observe and analyse the X-ray emissions specifically associated with CMEs. This study investigates the X-ray and extreme ultraviolet (EUV) emissions associated with a large filament eruption and CME that occurred on February 15, 2022. This event was highly occulted from the three vantage points of Solar Orbiter, STEREO-A, and Earth. We utilised X-ray observations from the Spectrometer/Telescope for Imaging X-rays (STIX) and EUV observations from the Full Sun Imager (FSI) of the Extreme Ultraviolet Imager (EUI) on-board Solar Orbiter, supplemented by multi-viewpoint observations from STEREO-A/EUVI. This enabled a comprehensive analysis of the X-ray emissions in relation to the filament structure observed in EUV. We used STIX's imaging and spectroscopy capabilities to characterise the X-ray source associated with the eruption. Our analysis reveals that the X-ray emissions associated with the occulted eruption originated from an altitude exceeding 0.3Rsun above the main flare site. The X-ray time-profile showed a sharp increase and exponential decay, and consisted of both a hot thermal component at 17 MK and non-thermal emissions (>11.4 keV) characterised by an electron spectral index of 3.9. Imaging analysis showed an extended X-ray source that coincided with the EUV emission as observed from EUI, and was imaged until the source grew to a size larger than the imaging limit of STIX (180 arcsec). The findings demonstrate that STIX combined with EUI provides a unique and powerful tool for examining the energetic properties of the CME component of solar energetic eruptions., Comment: 9 pages, 8 figures, accepted A&A

We studied the rapid filament evolution in AR 12975 during a confined C2 flare on 28 March 2022, which led to an eruptive M4 flare 1.5 h later. It is characterized by the breakup of the filament, the disappearance of its southern half, and the flow of the remaining plasma into a longer channel with a topology similar to an EUV hot channel during the flare. Our multipoint study takes advantage of Solar Orbiter's position at 0.33 AU and 83. 5{\deg} west of the Sun-Earth line. STIX and EUI onboard Solar Orbiter observed the event at the limb. AIA and HMI onboard SDO provided on-disk observations from which we derived DEM maps and NLFF magnetic field extrapolations. We find that both filament channels likely existed in close proximity before the flare. Based on field structures associated with AIA 1600 {\AA} flare ribbons and kernels, we propose a loop-loop reconnection scenario between field lines that surround and pass beneath the shorter filament channel, and field lines following a portion of the longer channel. Reconnection occurs in an essentially vertical current sheet at a PIL below the breakup region, leading to the formation of the flare loop arcade and the EUV hot channel. The scenario is supported by concentrated currents and free magnetic energy built up by antiparallel flows along the PIL before the flare. The reconnection probably propagated to involve the original filament itself, leading to its breakup and reformation. The reconnection geometry provides a general mechanism for the formation of the long filament channel and realizes the concept of tether cutting, which was active throughout the filament's rise phase, lasting from at least 30 min before the C2 flare until the eruption. The C2 flare represents a period of fast reconnection during this otherwise more steady process, during which most of the original filament was reconnected and joined the longer channel.

Where and how flares efficiently accelerate charged particles remains an unresolved question. Recent studies revealed that a "magnetic bottle" structure, which forms near the bottom of a large-scale reconnection current sheet above the flare arcade, is an excellent candidate for confining and accelerating charged particles. However, further understanding its role requires linking the various observational signatures to the underlying coupled plasma and particle processes. Here we present the first study combining multiwavelength observations with data-informed macroscopic magnetohydrodynamics and particle modeling in a realistic eruptive flare geometry. The presence of an above-the-loop-top magnetic bottle structure is strongly supported by the observations, which feature not only a local minimum of magnetic field strength but also abruptly slowing down plasma downflows. It also coincides with a compact hard X-ray source and an extended microwave source that bestrides above the flare arcade. Spatially resolved spectral analysis suggests that nonthermal electrons are highly concentrated in this region. Our model returns synthetic emission signatures that are well matched to the observations. The results suggest that the energetic electrons are strongly trapped in the magnetic bottle region due to turbulence, with only a small fraction managing to escape. The electrons are primarily accelerated by plasma compression and facilitated by a fast-mode termination shock via the Fermi mechanism. Our results provide concrete support for the magnetic bottle as the primary electron acceleration site in eruptive solar flares. They also offer new insights into understanding the previously reported small population of flare-accelerated electrons entering interplanetary space., Comment: 19 pages, 13 figures (12 pages and 10 figures for main text). Accepted for publication in The Astrophysical Journal. Minor proof corrections have been incorporated

Aims: This work aims to identify the mechanism driving pulsations in hard X-ray (HXR) and microwave emission during solar flares. Here, by using combined HXR and microwave observations from Solar Orbiter/STIX and EOVSA we investigate an X1.3 GOES class flare, 2022-03-30T17:21:00, which displays pulsations on timescales evolving from ~ 7 s in the impulsive phase to ~ 35 s later in the flare. Methods: The temporal, spatial and spectral evolution of the HXR and microwave pulsations during the impulsive phase of the flare are analysed. Images are reconstructed for individual peaks in the impulsive phase and spectral fitting is performed at high cadence throughout the first phase of pulsations. Results: Imaging analysis demonstrates that the HXR and microwave emission originates from multiple sites along the flare ribbons. The brightest sources and the location of the emission changes in time. Through HXR spectral analysis, the electron spectral index is found to be anti-correlated with the HXR flux showing a "soft-hard-soft" spectral index evolution for each pulsation. The timing of the associated filament eruption coincides with the early impulsive phase. Conclusions: Our results indicate that periodic acceleration and/or injection of electrons from multiple sites along the flare arcade is responsible for the pulsations observed in HXR and microwave. The evolution of pulsation timescales is likely a result of changes in the 3D magnetic field configuration in time related to the associated filament eruption., Comment: 15 pages, 8 figures, accepted by A&A

We report on the detection of the gamma-ray emission above 100 MeV from the solar flare of September 29, 2022, by Fermi LAT with simultaneous coverage in HXR by Solar Orbiter STIX. The Solar Orbiter-Earth separation was 178$^{\circ}$ at the time of the flare as seen from Earth, with Solar Orbiter observing the east limb. Based on STIX imaging, the flare was located 16$^{\circ}$ behind the eastern limb as seen from Earth. The STIX and GBM non-thermal emission and the LAT emission above 100 MeV all show similarly shaped time profiles, and the Fermi profiles peaked only 20 seconds after the STIX signal from the main flare site, setting this flare apart from all the other occulted flares observed by Fermi LAT. The radio spectral imaging based on the Nan\c{c}ay Radioheliograph and ORFEES spectrograph reveal geometries consistent with a magnetic structure that connects the parent active region behind the limb to the visible disk. We studied the basic characteristics of the gamma-ray time profile, in particular, the rise and decay times and the time delay between the gamma-ray and HXR peak fluxes. We compared the characteristics of this event with those of four Fermi LAT behind-the-limb flares and with an on-disk event and found that this event is strikingly similar to the impulsive on-disk flare. Based on multiwavelength observations, we find that the gamma-ray emission above 100 MeV originated from ions accelerated in the parent active region behind the limb and was transported to the visible disk via a large magnetic structure connected to the parent active region behind the limb. Our results strongly suggest that the source of the emission above 100 MeV from the September 29, 2022 flare cannot be the CME-driven shock., Comment: 12 pages, 7 figures, accepted for publication in Astronomy and Astrophysics

The Spectrometer/Telescope for Imaging X-rays (STIX) is a hard X-ray imaging spectrometer on board the ESA and NASA heliospheric mission Solar Orbiter. STIX has been operational for three years and has observed X-ray emission from ~35,000 solar flares. Throughout its lifetime, Solar Orbiter has been frequently struck by a high flux of energetic particles usually of flare origin, or from coronal mass ejection shocks. These Solar Energetic Particles (SEPs) are detected on board by the purpose-built energetic particle detector instrument suite. During SEP events, the X-ray signal is also contaminated in STIX. This work investigates the effect of these particles on the STIX instrument for two events. The first event occurred during an interplanetary shock crossing and the second event occurred when Solar Orbiter passed through Earth's radiation belts while performing a gravity assist maneuver. The induced spectra consist of tungsten fluorescence emission lines and secondary Bremsstrahlung emission produced by incident particles interacting with spacecraft components. For these two events, we identify > 100 keV electrons as significant contributors to the contamination via Bremsstrahlung emission and tungsten fluorescence., Comment: 8 pages, 11 figures, accepted by IEEE TNS

The Spectrometer/Telescope for Imaging X-rays (STIX) on board Solar Orbiter (SolO) provides a unique opportunity to systematically perform stereoscopic X-ray observations of solar flares with current and upcoming X-ray missions at Earth. These observations will produce the first reliable measurements of hard X-ray (HXR) directivity in decades, providing a new diagnostic of the flare-accelerated electron angular distribution and helping to constrain the processes that accelerate electrons in flares. However, such observations must be compared to modelling, taking into account electron and X-ray transport effects and realistic plasma conditions, all of which can change the properties of the measured HXR directivity. Here, we show how HXR directivity, defined as the ratio of X-ray spectra at different spacecraft viewing angles, varies with different electron and flare properties (e.g., electron angular distribution, highest energy electrons, and magnetic configuration), and how modelling can be used to extract these typically unknown properties from the data. Lastly, we present a preliminary HXR directivity analysis of two flares, observed by the Fermi Gamma-ray Burst Monitor (GBM) and SolO/STIX, demonstrating the feasibility and challenges associated with such observations, and how HXR directivity can be extracted by comparison with the modelling presented here., Comment: Accepted for publication in ApJ (January 2024)

We investigate two microflares of GOES classes A9 and C1 (after background subtraction) observed by STIX onboard Solar Orbiter with exceptionally strong nonthermal emission. We complement the hard X-ray imaging and spectral analysis by STIX with co-temporal observations in the (E)UV and visual range by AIA and HMI, in order to investigate what makes these microflares so sufficient in high-energy particle acceleration. We performed case studies of two microflares observed by STIX on October 11, 2021 and November 10, 2022 that showed unusually hard microflare X-ray spectra with power-law indices of the electron flux distributions delta = 2.98 and delta = 4.08 during their nonthermal peaks and photon energies up to 76 keV and 50 keV respectively. For both events under study, we found that one footpoint is located within a sunspot covering areas with mean magnetic flux densities in excess of 1500 G, suggesting that the hard electron spectra are caused by the strong magnetic fields in which the flare loops are rooted. In addition, we revisited the unusually hard RHESSI microflare initially published by Hannah et al. (2008b) and found that in this event also one flare kernel was located within a sunspot, which corroborates the result from the two hard STIX microflares under study. We conclude that the characteristics of the strong photospheric magnetic fields inside sunspot umbrae and penumbrae where the flare loops are rooted play an important role in the generation of exceptionally hard X-ray spectra in these microflares.

It is well known among the scientific community that solar flare activity often begins well before the main impulsive energy release. Our aim is to investigate the earliest phase of four distinct flares observed by Solar Orbiter/STIX and determine the relationships of the newly heated plasma to flare structure and dynamics. The analysis focuses on four events that were observed from both Earth and Solar Orbiter, which allows for a comparison of STIX observations with those of GOES/XRS and SDO/AIA. The early phases of the events were studied using STIX and GOES spectroscopic analysis to investigate the evolution of the physical parameters of the plasma, including the isothermal temperature and emission measure. Furthermore, to determine the location of the heated plasma, STIX observations were combined with AIA images. The events with clear emission prior to the impulsive phase show elevated temperatures ($> 10\,\mathrm{MK}$) from the very beginning, which indicates that energy release started before any detection by STIX. Although the temperature shows little variation during the initial phase, the emission measure increases by about two orders of magnitude, implying a series of incrementally greater energy releases. The spectral analysis of STIX and GOES from the very first time bins suggests that the emission has a multi-thermal nature, with a hot component of more than $10\,\mathrm{MK}$. This analysis confirms the existence of "hot onsets," with STIX detecting the hot onset pattern even earlier than GOES. These elevated temperatures imply that energy release actually begins well before any detection by STIX. Therefore, hot onsets may be significant in the initiation, early development, or even prediction of solar flares., Comment: 14 pages, 11 figures

We present a case study of an M4-class flare on 28 March 2022, near Solar Orbiter's first science perihelion (0.33 AU). Solar Orbiter was 83.5{\deg} west of the Sun-Earth line, making the event appear near the eastern limb, while Earth-orbiting spacecraft observed it near the disk center. The timing and location of the STIX X-ray sources were related to the plasma evolution observed in the EUV by the Extreme Ultraviolet Imager (EUI) on Solar Orbiter and the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory, and to the chromospheric response observed in 1600 {\AA} by AIA. We performed differential emission measure (DEM) analysis to further characterize the flaring plasma at different subvolumes. The pre-flare magnetic field configuration was analyzed using a nonlinear force-free (NLFF) extrapolation. In addition to the two classical hard X-ray (HXR) footpoints at the ends of the flaring loops, later in the event we observe a nonthermal HXR source at one of the anchor points of the erupting filament. The evolution of the AIA 1600~{\AA} footpoints indicates that this change in footpoint location represents a discontinuity in an otherwise continuous westward motion of the footpoints throughout the flare. The NLFF extrapolation suggests that strongly sheared field lines close to, or possibly even part of, the erupting filament reconnected with a weakly sheared arcade during the first HXR peak. The remainder of these field lines reconnected later in the event, producing the HXR peak at the southern filament footpoint. Our results show that the reconnection between field lines with very different shear in the early phase of the flare plays a crucial role in understanding the motion of the HXR footpoint during later parts of the flare. This generalizes simpler models, such as whipping reconnection, which only consider reconnection propagating along uniformly sheared arcades.

FOXSI is a direct-imaging, hard X-ray (HXR) telescope optimized for solar flare observations. It detects hot plasma and energetic electrons in and near energy release sites in the solar corona via bremsstrahlung emission, measuring both spatial structure and particle energy distributions. It provides two orders of magnitude faster imaging spectroscopy than previously available, probing physically relevant timescales (<1s) never before accessible to address fundamental questions of energy release and efficient particle acceleration that have importance far beyond their solar application (e.g., planetary magnetospheres, flaring stars, accretion disks). FOXSI measures not only the bright chromospheric X-ray emission where electrons lose most of their energy, but also simultaneous emission from electrons as they are accelerated in the corona and propagate along magnetic field lines. FOXSI detects emission from high in the tenuous corona, where previous instruments have been blinded by nearby bright features and will fully characterizes the accelerated electrons and hottest plasmas as they evolve in energy, space, and time to solve the mystery of how impulsive energy release leads to solar eruptions, the primary drivers of space weather at Earth, and how those eruptions are energized and evolve., Comment: White paper submitted to the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033; 14 pages, 4 figures, 1 table

It is essential that there be coordinated and co-optimized observations in X-rays, gamma-rays, and EUV during the peak of solar cycle 26 (~2036) to significantly advance our understanding of impulsive energy release in the corona. The open questions include: What are the physical origins of space-weather events? How are particles accelerated at the Sun? How is impulsively released energy transported throughout the solar atmosphere? How is the solar corona heated? Many of the processes involved in triggering, driving, and sustaining solar eruptive events -- including magnetic reconnection, particle acceleration, plasma heating, and energy transport in magnetized plasmas -- also play important roles in phenomena throughout the Universe. This set of observations can be achieved through a single flagship mission or, with foreplanning, through a combination of major missions (e.g., the previously proposed FIERCE mission concept)., Comment: White paper submitted to the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033; 5 pages, 1 figure

Understanding the nature of energetic particles in the solar atmosphere is one of the most important outstanding problems in heliophysics. Flare-accelerated particles compose a huge fraction of the flare energy budget; they have large influences on how events develop; they are an important source of high-energy particles found in the heliosphere; and they are the single most important corollary to other areas of high-energy astrophysics. Despite the importance of this area of study, this topic has in the past decade received only a small fraction of the resources necessary for a full investigation. For example, NASA has selected no new Explorer-class instrument in the past two decades that is capable of examining this topic. The advances that are currently being made in understanding flare-accelerated electrons are largely undertaken with data from EOVSA (NSF), STIX (ESA), and NuSTAR (NASA Astrophysics). This is despite the inclusion in the previous Heliophysics decadal survey of the FOXSI concept as part of the SEE2020 mission, and also despite NASA's having invested heavily in readying the technology for such an instrument via four flights of the FOXSI sounding rocket experiment. Due to that investment, the instrumentation stands ready to implement a hard X-ray mission to investigate flare-accelerated electrons. This white paper describes the scientific motivation for why this venture should be undertaken soon., Comment: White paper submitted to the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033; 15 pages, 5 figures

Aims. To provide a schematic mathematical description of the imaging concept of the Spectrometer/Telescope for Imaging X-rays (STIX) on board Solar Orbiter. The derived model is the fundamental starting point for both the interpretation of STIX data and the description of the data calibration process. Methods. We describe the STIX indirect imaging technique which is based on spatial modulation of the X-ray photon flux by means of tungsten grids. We show that each of 30 STIX imaging sub-collimators measures a complex Fourier component of the flaring X-ray source corresponding to a specific angular frequency. We also provide details about the count distribution model, which describes the relationship between the photon flux and the measured pixel counts. Results. We define the image reconstruction problem for STIX from both visibilities and photon counts. We provide an overview of the algorithms implemented for the solution of the imaging problem, and a comparison of the results obtained with these different methods in the case of the SOL2022-03-31T18 flaring event.

The Spectrometer and Telescope for Imaging X-rays (STIX) on board Solar Orbiter observes solar X-ray emission in the range of 4 – 150 keV and produces spectra and images of solar flares over a wide range of flare magnitudes. During nominal operation, STIX continuously generates data. A constant data flow requires fully automated data-processing pipelines to process and analyze the data, and a data platform to manage, visualize, and distribute the data products to the scientific community. The STIX Data Center has been built to fulfill these needs. In this paper, we outline its main components to help the community better understand the tools and data it provides. The STIX Data Center is operated at the University of Applied Sciences and Arts Northwestern Switzerland (FHNW) and consists of automated processing pipelines and a data platform. The pipelines process STIX telemetry data, perform common analysis tasks, and generate data products at different processing levels. They have been designed to operate fully automatically with minimal human intervention. The data platform provides web-based user interfaces and application programmable interfaces for searching and downloading STIX data products. The STIX Data Center has been operating successfully for more than two years. The platform facilitates instrument operations and provides vital support to STIX data users., Comment: 18 pages, Accepted by A&A, https://doi.org/10.1051/0004-6361/202346031

Aims: The aim of this work is to develop a method to systematically detect and characterise fast-time variations ($\gtrsim 1$s) in the non-thermal hard X-ray (HXR) time profiles of solar flares using high-resolution data from Solar Orbiter's Spectrometer/Telescope for Imaging X-rays (STIX). Methods: The HXR time profiles were smoothed using Gaussian Process (GP) regression. The time profiles were then fitted with a linear combination of Gaussians to decompose the time profile. From the Gaussian decomposition, key characteristics such as the periodicity, full width at half maximum (FWHM), time evolution, and amplitude can be derived. Results: We present the outcome of applying this method to four M and X GOES-class flares from the first year of Solar Orbiter science operations. The HXR time profiles of these flares were decomposed into individual Gaussians and their periods were derived. The quality of fit is quantified by the standard deviation of the residuals (difference between observed and fitted curve, normalised by the error on the observed data), for which we obtain $\leq 1.8$ for all flares presented. In this work, the first detection of fast-time variations with Solar Orbiter's STIX instrument has been made on timescales across the range of 4-128s. Conclusions: A new method for identifying and characterising fast-time variations in the non-thermal HXR profiles of solar flares has been developed, in which the time profiles are fit with a linear combination of Gaussian bursts. The opportunity to study time variations in flares has greatly improved with the new observations from STIX on Solar Orbiter., Comment: 12 pages, 10 figures, A&A journal

Context. We present an analysis of a GOES M1.8 flare with excellent observational coverage in UV, EUV, and X-ray, including observations from the instruments IRIS, SDO with AIA, Hinode/EIS, Hinode/XRT, and Solar Orbiter with the Spectrometer/Telescope for Imaging X-rays (STIX). Hard X-ray emission is often observed at the footpoints of flare loops and is occasionally observed in the corona. In this flare, four nonthermal hard X-ray sources are seen. Aim. Our aim is to understand why we can observe four individual nonthermal sources in this flare and how we can characterize the physical properties of these four sources. Methods. We used the multiwavelength approach to analyze the flare and characterize the four sources. To do this, we combined imaging at different wavelengths and spectroscopic fitting in the EUV and X-ray range. Results. The flare is eruptive with an associated coronal mass ejection, and it shows the classical flare picture of a heated flare loop seen in EUV and X-rays, and two nonthermal hard X-ray footpoints at the loop ends. In addition to the main flare sources, we observed two outer sources in the UV, EUV, and nonthermal X-ray range located away from the main flare loop to the east and west. The two outer sources are clearly correlated in time, and they are only seen during the first two minutes of the impulsive phase, which lasts a total of about four minutes. Conclusions. Based on the analysis, we determine that the outer sources are the anchor points of an erupting filament. The hard X-ray emission is interpreted as flare-accelerated electrons that are injected upward into the filament and then precipitate along the filament toward the chromosphere, producing Bremsstrahlung. While sources like this have been speculated to exist, this is the first report of their detection., Comment: 12 pages, 10 figures, accepted for publication in A&A

One of the main science questions of the Solar Orbiter and Parker Solar Probe missions deals with understanding how electrons in the lower solar corona are accelerated and how they subsequently access interplanetary space. We aim to investigate the electron acceleration and energy release sites as well as the manner in which accelerated electrons access the interplanetary space in the case of the SOL2021-02-18T18:05 event, a GOES A8 class microflare associated with a coronal jet. This study takes advantage of three different vantage points, Solar Orbiter, STEREO-A, and Earth, with observations ranging from radio to X-ray. Multi-wavelength timing analysis combined with UV/EUV imagery and X-ray spectroscopy by Solar Orbiter/STIX (Spectrometer/Telescope for Imaging X-rays) is used to investigate the origin of the observed emission during different flare phases. The event under investigation satisfies the classical picture of the onset time of the acceleration of electrons coinciding with the jet and the radio type III bursts. This microflare features prominent hard X-ray nonthermal emission down to at least 10 keV and a spectrum that is much harder than usual for a microflare with a spectral index of 2.9. From Earth's vantage point, the microflare is seen near the limb, revealing the coronal energy release site above the flare loop in EUV, which, from STIX spectroscopic analysis, turns out to be hot (at roughly the same temperature of the flare). Moreover, this region is moving toward higher altitudes over time (about 30 km/s). During the flare, the same region spatially coincides with the origin of the coronal jet. We conclude that the energy release site observed above-the-loop corresponds to the electron acceleration site, corroborating that interchange reconnection is a viable candidate for particle acceleration in the low corona on field lines open to interplanetary space., Comment: 9 pages, 6 figures

We present the first survey of quiet Sun features observed in hard X-rays (HXRs), using the the Nuclear Spectroscopic Telescope ARray (NuSTAR), a HXR focusing optics telescope. The recent solar minimum combined with NuSTAR's high sensitivity has presented a unique opportunity to perform the first HXR imaging spectroscopy on a range of features in the quiet Sun. By studying the HXR emission of these features we can detect or constrain the presence of high temperature (>5 MK) or non-thermal sources, to help understand how they relate to larger more energetic solar phenomena, and determine their contribution to heating the solar atmosphere. We report on several features observed in the 28 September 2018 NuSTAR full-disk quiet Sun mosaics, the first of the NuSTAR quiet Sun observing campaigns, which mostly include steady features of X-ray bright points and an emerging flux region which later evolved into an active region, as well as a short-lived jet. We find that the features' HXR spectra are well fitted with isothermal models with temperatures ranging between 2.0-3.2 MK. Combining the NuSTAR data with softer X-ray emission from Hinode/XRT and EUV from SDO/AIA we recover the differential emission measures, confirming little significant emission above 4 MK. The NuSTAR HXR spectra allow us to constrain the possible non-thermal emission that would still be consistent with a null HXR detection. We found that for only one of the features (the jet) was there a potential non-thermal upper limit capable of powering the heating observed. However, even here the non-thermal electron distribution had to be very steep (effectively mono-energetic) with a low energy cut-off between 3-4 keV. The higher temperature or non-thermal sources in the typical quiet Sun features found in this September 2018 data are therefore found to be very weak, if present at all., Comment: Accepted for publication in Solar Physics

The hydrogen Lyman-$\alpha$ (H {\sc i} Ly$\alpha$) emission during solar flares has rarely been studied in spatially resolved images and its physical origin has not been fully understood. In this paper, we present novel Ly$\alpha$ images for a C1.4 solar flare (SOL2021-08-20T22:00) from the Extreme Ultraviolet Imager aboard Solar Orbiter, together with multi-waveband and multi-perspective observations from the Solar Terrestrial Relations Observatory Ahead and the Solar Dynamics Observatory spacecraft. It is found that the Ly$\alpha$ emission has a good temporal correlation with the thermal emissions at 1--8 \AA\ and 5--7 keV, indicating that the flaring Ly$\alpha$ is mainly produced by a thermal process in this small event. However, nonthermal electrons play a minor role in generating Ly$\alpha$ at flare ribbons during the rise phase of the flare, as revealed by the hard X-ray imaging and spectral fitting. Besides originating from flare ribbons, the Ly$\alpha$ emission can come from flare loops, likely caused by plasma heating and also cooling that happen in different flare phases. It is also found that the Ly$\alpha$ emission shows fairly similar features with the He {\sc ii} 304 \AA\ emission in light curve and spatio-temporal variation along with small differences. These observational results improve our understanding of the Ly$\alpha$ emission in solar flares and also provide some insights for investigating the Ly$\alpha$ emission in stellar flares., Comment: 19 pages, 7 figures, and 2 tables. ApJ accepted. Comments are welcome

We describe observations of the white-light structures in the low corona following the X8.2 flare SOL2017-09-10, as observed in full Stokes parameters by the Helioseismic and Magnetic Imager (HMI) of the Solar Dynamics Observatory. These data show both bright loops and a diffuse emission region above them. We interpret the loops as the white-light counterpart of a classical loop-prominence system, intermediate between the hot X-ray loops and coronal rain. The diffuse emission external to the loops is linearly polarized and has a natural interpretation in terms of Thomson scattering from the hot plasma seen prior to its cooling and recombination. The polarimetric data from HMI enable us to distinguish this contribution of scattering from the HMI pseudo-continuum measurement, and to make a direct estimation of the coronal mass in the polarized source. For a snapshot at 16:19~UT, we estimate a mass $8 \times 10^{14}$~g. We further conclude that the volumetric filling factor of this source is near unity., Comment: 13 pages, 6 figures, Accepted in ApJ

Context. Solar active regions are known to have jets. These jets are associated with heating and the release of particles into the solar wind. Aim. Our aim is to understand the spatial distribution of coronal jets within active regions to understand if there is a preferential location for them to occur. Methods. We analysed five active regions using Solar Dynamics Observatory Atmospheric Imaging Assembly data over a period of 2-3.5 days when the active regions were close to disk centre. Each active region had a different age, magnetic field strength, and topology. We developed a methodology for determining the position and length of the jets. Results. Jets are observed more frequently at the edges of the active regions and are more densely located around a strong leading sunspot. The number of coronal jets for our active regions is dependent on the age of the active region. The older active regions produce more jets than younger ones. Jets were observed dominantly at the edges of the active regions, and not as frequently in the centre. The number of jets is independent of the average unsigned magnetic field and total flux density in the whole active region. The jets are located around the edges of the strong leading sunspot., Comment: 8 pages, 8 figures, accepted for publication in A&A

Solar nanoflares are small eruptive events releasing magnetic energy in the quiet corona. If nanoflares follow the same physics as their larger counterparts, they should emit hard X-rays (HXRs) but with a rather faint intensity. A copious and continuous presence of nanoflares would deliver enormous amounts of energy into the solar corona, possibly accounting for its high temperatures. To date, there has not been any direct observation of such sustained and persistent HXRs from the quiescent Sun. However, Hannah et al. in 2010 constrained the quiet Sun HXR emission using almost 12 days of quiescent solar-off-pointing observations by RHESSI. These observations set upper limits at $3.4\times 10^{-2}$ photons$^{-1}$ s$^{-1}$ cm$^{-2}$ keV$^{-1}$ and $9.5\times 10^{-4}$ photons$^{-1}$ s$^{-1}$ cm$^{-2}$ keV$^{-1}$ for the 3-6 keV and 6-12 keV energy ranges, respectively. Observing feeble HXRs is challenging because it demands high sensitivity and dynamic range instruments in HXRs. The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket experiment excels in these two attributes. Particularly, FOXSI completed its third successful flight (FOXSI-3) on September 7th, 2018. During FOXSI-3's flight, the Sun exhibited a fairly quiet configuration, displaying only one aged non-flaring active region. Using the entire $\sim$6.5 minutes of FOXSI-3 data, we constrained the quiet Sun emission in HXRs. We found $2\sigma$ upper limits in the order of $\sim 10^{-3}$ photons$^{-1}$ s$^{-1}$ cm$^{-2}$ keV$^{-1}$ for the 5-10 keV energy range. FOXSI-3's upper limit is consistent with what was reported by Hannah et al., 2010, but FOXSI-3 achieved this result using $\sim$1/2640 less time than RHESSI. A possible future spacecraft using FOXSI's concept would allow enough observation time to constrain the current HXR quiet Sun limits further or perhaps even make direct detections.

Context. The Spectrometer/Telescope for Imaging X-rays (STIX) is one of 6 remote sensing instruments on-board Solar Orbiter. It provides hard X-ray imaging spectroscopy of solar flares by sampling the Fourier transform of the incoming flux. Aims. To show that the visibility amplitude and phase calibration of 24 out of 30 STIX sub-collimators is well advanced and that a set of imaging methods is able to provide the first hard X-ray images of the flaring Sun from Solar Orbiter. Methods. We applied four visibility-based image reconstruction methods and a count-based one to calibrated STIX observations. The resulting reconstructions are compared to those provided by an optimization algorithm used for fitting the amplitudes of STIX visibilities. Results. When applied to six flares with GOES class between C4 and M4 which occurred in May 2021, the five imaging methods produce results morphologically consistent with the ones provided by the Atmospheric Imaging Assembly on-board the Solar Dynamic Observatory (SDO/AIA) in UV wavelengths. The $\chi^2$ values and the parameters of the reconstructed sources are comparable between methods, thus confirming their robustness. Conclusions. This paper shows that the current calibration of the main part of STIX sub-collimators has reached a satisfactory level for scientific data exploitation, and that the imaging algorithms already available in the STIX data analysis software provide reliable and robust reconstructions of the morphology of solar flares.

Even small solar flares can display a surprising level of complexity regarding their morphology and temporal evolution. Many of their properties, such as energy release and electron acceleration can be studied using highly complementary observations at X-ray and radio wavelengths. We present X-ray observations from the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) and radio observations from the Karl G. Jansky Very Large Array (VLA) of a series of GOES A3.4 to B1.6 class flares observed on 2013 April 23. The flares, as seen in X-ray and extreme ultraviolet (EUV), originated from multiple locations within active region NOAA 11726. A veritable zoo of different radio emissions between 1 GHz and 2 GHz was observed co-temporally with the X-ray flares. In addition to broad-band continuum emission, broad-band short-lived bursts and narrow-band spikes, indicative of accelerated electrons, were observed. However, these sources were located up to 150 arcsec away from the flaring X-ray sources but only some of these emissions could be explained as signatures of electrons that were accelerated near the main flare site. For other sources, no obvious magnetic connection to the main flare site could be found. These emissions likely originate from secondary acceleration sites triggered by the flare, but may be due to reconnection and acceleration completely unrelated to the co-temporally observed flare. Thanks to the extremely high sensitivity of the VLA, not achieved with current X-ray instrumentation, it is shown that particle acceleration happens frequently and at multiple locations within a flaring active region., Comment: accepted for publication in ApJ

We investigate the spatial, temporal, and spectral properties of 10 microflares from AR12721 on 2018 September 9 and 10 observed in X-rays using the Nuclear Spectroscopic Telescope ARray (NuSTAR) and the Solar Dynamic Observatory's Atmospheric Imaging Assembly and Helioseismic and Magnetic Imager (SDO/AIA and HMI). We find GOES sub-A class equivalent microflare energies of 10$^{26}$-10$^{28}$ erg reaching temperatures up to 10 MK with consistent quiescent or hot active region core plasma temperatures of 3-4 MK. One microflare (SOL2018-09-09T10:33), with an equivalent GOES class of A0.1, has non-thermal HXR emission during its impulsive phase (of non-thermal power $\sim$7$\times$10$^{24}$ erg s$^{-1}$) making it one of the faintest X-ray microflares to have direct evidence for accelerated electrons. In 4 of the 10 microflares, we find that the X-ray time profile matches fainter and more transient sources in the EUV, highlighting the need for observations sensitive to only the hottest material that reaches temperatures higher than those of the active region core ($>$5 MK). Evidence for corresponding photospheric magnetic flux cancellation/emergence present at the footpoints of 8 microflares is also observed., Comment: Accepted for published in MNRAS

The Spectrometer/Telescope for Imaging X-rays (STIX) is the HXR instrument onboard Solar Orbiter designed to observe solar flares over a broad range of flare sizes, between 4-150 keV. We report the first STIX observations of microflares recorded during the instrument commissioning phase in order to investigate the STIX performance at its detection limit. This first result paper focuses on the temporal and spectral evolution of STIX microflares occuring in the AR12765 in June 2020, and compares the STIX measurements with GOES/XRS, SDO/AIA, and Hinode/XRT. For the observed microflares of the GOES A and B class, the STIX peak time at lowest energies is located in the impulsive phase of the flares, well before the GOES peak time. Such a behavior can either be explained by the higher sensitivity of STIX to higher temperatures compared to GOES, or due to the existence of a nonthermal component reaching down to low energies. The interpretation is inconclusive due to limited counting statistics for all but the largest flare in our sample. For this largest flare, the low-energy peak time is clearly due to thermal emission, and the nonthermal component seen at higher energies occurs even earlier. This suggests that the classic thermal explanation might also be favored for the majority of the smaller flares. In combination with EUV and SXR observations, STIX corroborates earlier findings that an isothermal assumption is of limited validity. Future diagnostic efforts should focus on multi-wavelength studies to derive differential emission measure distributions over a wide range of temperatures to accurately describe the energetics of solar flares. Commissioning observations confirm that STIX is working as designed. As a rule of thumb, STIX detects flares as small as the GOES A class. For flares above the GOES B class, detailed spectral and imaging analyses can be performed., Comment: 19 pages, 11 figures

Solar flare termination shocks have been suggested as one of the viable mechanisms for accelerating electrons and ions to high energies. Observational evidence of such shocks, however, remains rare. Using radio dynamic spectroscopic imaging of a long-duration C1.9 flare obtained by the Karl G. Jansky Very Large Array (VLA), Chen et al. (2015) suggested that a type of coherent radio bursts, referred to as "stochastic spike bursts," were radio signatures of nonthermal electrons interacting with myriad density fluctuations at the front of a flare termination shock. Here we report another stochastic spike burst event recorded during the extended energy release phase of a long-duration M8.4-class eruptive flare on 2012 March 10. VLA radio spectroscopic imaging of the spikes in 1.0--1.6 GHz shows that similar to the case of Chen et al. (2015), the burst centroids form an extended, ~10''-long structure in the corona. By combining extreme-ultraviolet imaging observations of the flare from two vantage points with hard X-ray and ultraviolet observations of the flare ribbon brightenings, we reconstruct the flare arcade in three dimensions. The results show that the spike source is located at ~60 Mm above the flare arcade, where a diffuse supra-arcade fan and multitudes of plasma downflows are present. Although the flare arcade and ribbons seen during the impulsive phase do not allow us to clearly understand how the observed spike source location is connected to the flare geometry, the cooling flare arcade observed two hours later suggests that the spikes are located in the above-the-loop-top region, where a termination shock presumably forms., Comment: 23 pages, 13 figures, published by The Astrophysical Journal

Nonthermal sources located above bright flare arcades, referred to as the "above-the-loop-top" sources, have been often suggested as the primary electron acceleration site in major solar flares. The X8.2 limb flare on 2017 September 10 features such an above-the-loop-top source, which was observed in both microwaves and hard X-rays (HXRs) by the Expanded Owens Valley Solar Array (EOVSA) and the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI), respectively. By combining the microwave and HXR imaging spectroscopy observations with multi-filter extreme ultraviolet and soft X-ray imaging data, we derive the energetic electron distribution of this source over a broad energy range from $<$10 keV up to $\sim$MeV during the early impulsive phase of the flare. The best-fit electron distribution consists of a thermal "core" from $\sim$25 MK plasma. Meanwhile, a nonthermal power-law "tail" joins the thermal core at $\sim$16 keV with a spectral index of $\sim$3.6, which breaks down at above $\sim$160 keV to $>$6.0. In addition, temporally resolved analysis suggests that the electron distribution above the break energy rapidly hardens with the spectral index decreasing from $>$20 to $\sim$6.0 within 20 s, or less than $\sim$10 Alfv\'{e}n crossing times in the source. These results provide strong support for the above-the-loop-top source as the primary site where an on-going bulk acceleration of energetic electrons is taking place very early in the flare energy release., Comment: 12 pages, 5 figures, accepted for publication in The Astrophysical Journal Letters

Mercury mission MESSENGER's %(MErcury Surface, Space ENvironment, GEochemistry, and Ranging Solar Assembly for X-rays (SAX) observed almost 700 solar flares between May 28, 2007 and August 19, 2013, as cataloged by \citet{dennisSOLARFLAREELEMENT2015}. The SAX instrument, part of the X-ray Spectrometer (XRS), operated at 1 -- 10 keV, partially overlapping the energy range of the GOES X-ray spectrometers. SAX provides viewing angles different from the Earth-Sun line and can therefore be used as a GOES proxy for partially or fully occulted flares as seen from Earth. For flares with GOES classes above C2 seen on-disk for both instruments, we found an empirical relationship between the soft X-ray (SXR) fluxes measured by both SAX and GOES. Due to the different energy response of the two SXR instruments, individual events can deviate on average by about a factor of two from the empirical relationship, implying that predictions of the GOES class of occulted flares from SAX data are therefore accurate to within the same factor. The distinctive GOES energy response in combination with the multithermal nature of flares makes it difficult for any instrument, even other soft X-ray spectrometers, to provide a GOES proxy more accurate than a factor of two.

A M-class behind-the-limb solar flare on 1 May 2013 (SOL2013-05-01T02:32), accompanied by a ($\sim$ 400 km/s) CME was observed by several space-based observatories with different viewing angles. We investigated the RHESSI-observed occulted hard X-ray emissions that originated at least 0.1 \solrad{} above the flare site. Emissions below $\sim$10 keV revealed a hot, extended (11 MK, >60 arcsec) thermal source from the escaping CME core, with densities around $10^{9}$ cm$^{-3}$. In such a tenuous hot plasma, ionization times scales are several minutes, consistent with the non-detection of the hot CME core in SDO/AIA's 131 \AA{} filter. The non-thermal RHESSI source originated from an even larger area ($\sim$100 arcsec) at lower densities ($10^{8}$ cm$^{-3}$) located above the hot core, but still behind the CME front. This indicates that the observed part of the non-thermal electrons are not responsible for heating the CME core. Possibly the hot core was heated by non-thermal electrons before it became visible from Earth, meaning that the un-occulted part of the non-thermal emission likely originates from a more tenuous part of the CME core, where non-thermal electrons survive long enough to became visible from Earth. Simultaneous hard X-ray spectra from the Mars Odyssey mission, which viewed the flare on disk, indicated that the number of non-thermal electrons $>$20 keV within the high coronal source is $\sim$0.1 - 0.5\% compared to the number within the chromospheric flare ribbons. The detection of high coronal hard X-ray sources in this moderate size event suggests that such sources are likely a common feature within solar eruptive events.

Solar flares are explosive releases of magnetic energy. Hard X-ray (HXR) flare emission originates from both hot (millions of Kelvin) plasma and nonthermal accelerated particles, giving insight into flare energy release. The Nuclear Spectroscopic Telescope ARray (NuSTAR) utilizes direct focusing optics to attain much higher sensitivity in the HXR range than that of previous indirect imagers. This paper presents eleven NuSTAR microflares from two active regions (AR 12671 on 2017 August 21, and AR 12712 on 2018 May 29). The temporal, spatial, and energetic properties of each are discussed in context with previously published HXR brightenings. They are seen to display several 'large-flare' properties, such as impulsive time profiles and earlier peaktimes in higher energy HXRs. For two events where active region background could be removed, microflare emission did not display spatial complexity: differing NuSTAR energy ranges had equivalent emission centroids. Finally, spectral fitting showed a high energy excess over a single thermal model in all events. This excess was consistent with additional higher-temperature plasma volumes in 10/11 microflares, and consistent only with an accelerated particle distribution in the last. Previous NuSTAR studies focused on one or a few microflares at a time, making this the first to collectively examine a sizable number of events. Additionally, this paper introduces an observed variation in the NuSTAR gain unique to the extremely low-livetime (<1%) regime, and establishes a correction method to be used in future NuSTAR solar spectral analysis., Comment: Accepted for publication in ApJ

We study the nature of energy release and transfer for two sub-A class solar microflares observed during the second flight of the Focusing Optics X-ray Solar Imager (FOXSI-2) sounding rocket experiment on 2014 December 11. FOXSI is the first solar-dedicated instrument to utilize focusing optics to image the Sun in the hard X-ray (HXR) regime, sensitive to the energy range 4-20 keV. Through spectral analysis of the two microflares using an optically thin isothermal plasma model, we find evidence for plasma heated to temperatures of ~10 MK and emissions measures down to ~$10^{44}~$cm$^{-3}$. Though nonthermal emission was not detected for the FOXSI-2 microflares, a study of the parameter space for possible hidden nonthermal components shows that there could be enough energy in nonthermal electrons to account for the thermal energy in microflare 1, indicating that this flare is plausibly consistent with the standard thick-target model. With a solar-optimized design and improvements in HXR focusing optics, FOXSI-2 offers approximately five times greater sensitivity at 10 keV than the Nuclear Spectroscopic Telescope Array (NuSTAR) for typical microflare observations and allows for the first direct imaging spectroscopy of solar HXRs with an angular resolution at scales relevant for microflares. Harnessing these improved capabilities to study the evolution of small-scale events, we find evidence for spatial and temporal complexity during a sub-A class flare. These studies in combination with contemporanous observations by the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory (SDO/AIA) indicate that the evolution of these small microflares is more similar to that of large flares than to the single burst of energy expected for a nanoflare., Comment: 20 pages, 16 figures, 2 tables; Submitted to ApJ

In the standard model of solar flares, a large-scale reconnection current sheet is postulated as the central engine for powering the flare energy release and accelerating particles. However, where and how the energy release and particle acceleration occur remain unclear due to the lack of measurements for the magnetic properties of the current sheet. Here we report the measurement of spatially-resolved magnetic field and flare-accelerated relativistic electrons along a current-sheet feature in a solar flare. The measured magnetic field profile shows a local maximum where the reconnecting field lines of opposite polarities closely approach each other, known as the reconnection X point. The measurements also reveal a local minimum near the bottom of the current sheet above the flare loop-top, referred to as a "magnetic bottle". This spatial structure agrees with theoretical predictions and numerical modeling results. A strong reconnection electric field of ~4000 V/m is inferred near the X point. This location, however, shows a local depletion of microwave-emitting relativistic electrons. These electrons concentrate instead at or near the magnetic bottle structure, where more than 99% of them reside at each instant. Our observations suggest that the loop-top magnetic bottle is likely the primary site for accelerating and/or confining the relativistic electrons., Comment: 16 pages, 8 figures

We present X-ray imaging spectroscopy of one of the weakest active region (AR) microflares ever studied. The microflare occurred at $\sim$11:04 UT on 2018 September 9 and we studied it using the Nuclear Spectroscopic Telescope ARray (NuSTAR) and the Solar Dynamic Observatory's Atmospheric Imaging Assembly (SDO/AIA). The microflare is observed clearly in 2.5-7 keV with NuSTAR and in Fe XVIII emission derived from the hotter component of the 94 $\unicode{x212B}$ SDO/AIA channel. We estimate the event to be three orders of magnitude lower than a GOES A class microflare with an energy of 1.1$\times$10$^{26}$ erg. It reaches temperatures of 6.7 MK with an emission measure of 8.0$\times$10$^{43}$ cm$^{-3}$. Non-thermal emission is not detected but we instead determine upper limits to such emission. We present the lowest thermal energy estimate for an AR microflare in literature, which is at the lower limits of what is still considered an X-ray microflare., Comment: Accepted for publication in ApJL

The Micro Solar-Flare Apparatus (MiSolFA) is a compact X-ray imaging spectrometer designed for a small 6U micro-satellite. As a relatively inexpensive yet capable Earth-orbiting instrument, MiSolFA is designed to image the high-energy regions of solar flares from a different perspective than that of Solar Orbiter's STIX, operating from a highly elliptical heliocentric orbit. Two instruments working together in this way would provide a 3-dimensional view of X-ray emitting regions and can bypass the dynamic range limitation preventing simultaneous coronal and chromospheric imaging. Stereoscopic X-ray observations would also contain valuable information about the anisotropy of the flare-accelerated electron distribution. To perform these types of observations, MiSolFA must be capable of imaging sources with energies between 10 and 100 keV, with 10 arcsec angular resolution. MiSolFA's Imager will be the most compact X-ray imaging spectrometer in space. Scaling down the volume by a factor of ten from previous instrument designs requires special considerations. Here we present the design principles of the MiSolFA X-ray optics, discuss the necessary compromises, and evaluate the performance of the Engineering Model., Comment: 25 pages, 10 figures, to be published in Advances in Space Research

We present the first joint observation of a small microflare in X-rays with the Nuclear Spectroscopic Telescope ARray (NuSTAR), UV with the Interface Region Imaging Spectrograph (IRIS) and EUV with the Solar Dynamics Observatory/Atmospheric Imaging Assembly (SDO/AIA). These combined observations allows us to study the microflare's hot coronal and cooler chromospheric/transition region emission. This small microflare peaks from SOL2016-07-26T23:35 to 23:36UT, in both NuSTAR, SDO/AIA and IRIS. Spatially this corresponds to a small loop visible in the SDO/AIA Fe XVIII emission, which matches a similar structure lower in the solar atmosphere seen by IRIS in SJI1330{\AA} and 1400\AA. The NuSTAR emission in both 2.5-4 keV and 4-6 keV, is located in a small source at this loop location. The IRIS slit was over the microflaring loop, and fits show little change in Mg II but do show intensity increases, slight width enhancements and redshifts in Si IV andO IV, indicating that this microflare had most significance in and above the upper chromosphere. The NuSTAR microflare spectrum is well fitted by a thermal component of 5.8MK and $2.3\times10^{44}$ cm$^{-3}$, which corresponds to a thermal energy of $10^{26}$ erg, making it considerably smaller than previously studied X-ray microflares. No non-thermal emission was detected but this could be due to the limited effective exposure time of the observation. This observation shows that even ordinary features seen in UV and EUV, can remarkably have a higher energy component that is clear in X-rays., Comment: Accepted for publication in ApJ

Magnetic reconnection, the central engine that powers explosive phenomena throughout the Universe, is also perceived as one of the principal mechanisms for accelerating particles to high energies. Although various signatures of magnetic reconnection have been frequently reported, observational evidence that links particle acceleration directly to the reconnection site has been rare, especially for space plasma environments currently inaccessible to $\textit{in situ}$ measurements. Here we utilize broadband radio dynamic imaging spectroscopy available from the Karl G. Jansky Very Large Array to observe decimetric type III radio bursts in a solar jet with high angular ($\sim$20$''$), spectral ($\sim$1 %), and temporal resolution (50 milliseconds). These observations allow us to derive detailed trajectories of semi-relativistic (tens of keV) electron beams in the low solar corona with unprecedentedly high angular precision ($<0''.65$). We found that each group of electron beams, which corresponds to a cluster of type III bursts with 1-2-second duration, diverges from an extremely compact region ($\sim$600 km$^2$) in the low solar corona. The beam-diverging sites are located behind the erupting jet spire and above the closed arcades, coinciding with the presumed location of magnetic reconnection in the jet eruption picture supported by extreme ultraviolet/X-ray data and magnetic modeling. We interpret each beam-diverging site as a reconnection null point where multitudes of magnetic flux tubes join and reconnect. Our data suggest that the null points likely consist of a high level of density inhomogeneities possibly down to 10-km scales. These results, at least in the present case, strongly favor a reconnection-driven electron acceleration scenario., Comment: 26 pages, 11 figures, accepted by the $\textit{Astrophysical Journal}$. Associated online videos are available at https://web.njit.edu/~binchen/download/publications/Chen+2018_TP3/

The explanation of the coronal heating problem potentially lies in the existence of nanoflares, numerous small-scale heating events occuring across the whole solar disk. In this paper, we present the first imaging spectroscopy X-ray observations of three quiet Sun flares during the NuSTAR solar campaigns on 2016 July 26 and 2017 March 21, concurrent with SDO/AIA observations. Two of the three events showed time lags of a few minutes between peak X-ray and extreme ultraviolet (EUV) emissions. Isothermal fits with rather low temperatures in the range $3.2-4.1$ MK and emission measures of $(0.6-15)\times10^{44} \textrm{ cm}^{-3}$ describe their spectra well, resulting in thermal energies in the range $(2-6)\times10^{26}\textrm{ ergs}$. NuSTAR spectra did not show any signs of a nonthermal or higher temperature component. However, since the estimated upper limits of (hidden) nonthermal energy are comparable to the thermal energy estimates, the lack of a nonthermal component in the observed spectra is not a constraining result. The estimated GOES classes from the fitted values of temperature and emission measure fall between $1/1000 \textrm{ and } 1/100$ A class level, making them 8 orders of magnitude fainter in soft X-ray flux than the largest solar flares., Comment: Accepted for publication in ApJL

The Fermi-Large Area Telescope (LAT) detection of the X8.2 GOES class solar flare of 2017 September 10 provides for the first time observations of a long duration high-energy gamma-ray flare associated with a Ground Level Enhancement (GLE). The >100 MeV emission from this flare lasted for more than 12 hours covering both the impulsive and extended phase. We present the localization of the gamma-ray emission and find that it is consistent with the active region (AR) from which the flare occurred over a period lasting more than 6 hours contrary to what was found for the 2012 March 7 flares. The temporal variation of the proton index inferred from the gamma-ray data seems to suggest two phases in acceleration of the proton population. Based on timing arguments we interpret the second phase to be tied to the acceleration mechanism powering the GLE, believed to be particle acceleration at a coronal shock driven by the CME., Comment: 6 pages, 3 figures. Submitted to ApJL