Search

We present the band gap engineering and morphological tuning of BaAl2O4:0.1% Sm3+, x% Tb3+ nanophosphors synthesized by citrate sol–gel method. Herein, the samarium (Sm3+) concentration is kept constant at 0.1%, while the concentration of terbium (Tb3+) is tuned from 0.5 to 2.5% with steps of 0.5%. X-ray diffraction confirms the hexagonal crystal structure of the BaAl2O4:0.1% Sm3+, x% Tb3+ nanophosphors. The reduction in crystallite size from 38 to 31 nm is noticed after doping and co-doping. Scanning electron microscope micrographs display evolution in morphology from multimodal grain-like structures to agglomerated pointy nanorods. Energy dispersive X-ray spectroscopy confirms all the main elements, although Sm is not detected due to the low content incorporated into the lattice. Transmission electron microscope results reveal that the particle size and shape can be controlled by varying concentrations of Tb3+. Diffuse reflectance spectra with the aid of the Kubelka–Munk function, reveal the energy band gap in the range of 2.6–5.3 eV. Under the excitation wavelength of 235 nm, photoluminescence studies reveal eight emission peaks located between 380 and 641 nm characteristic of Tb3+ ions. Upon the excitation wavelength of 402 nm, the emission spectra show four peaks positioned at 564, 601, 648 and 708 nm attributed to 4G5/2 → 6H5/2, 4G5/2 → 6H7/2,4G5/2 → 6H9/2 and 4G5/2 → 6H11/2 transitions of Sm3+ ions, respectively. From the colour coordinate results, this nanophosphor can successfully play a significant role in green, yellow and red LED applications. [ABSTRACT FROM AUTHOR]

Aqueous nanoparticle dispersions were prepared from a conjugated polymer poly[thiophene-2,5-diyl-alt-5,10-bis((2-hexyldecyl)oxy)dithieno[3,2-c:3′,2′-h][1,5]naphthyridine-2,7-diyl] (PTNT) and fullerene blend utilizing chloroform as well as a non-chlorinated and environmentally benign solvent, o-xylene, as the miniemulsion dispersed phase solvent. The nanoparticles (NPs) in the solid-state film were found to coalesce and offered a smooth surface topography upon thermal annealing. Organic photovoltaics (OPVs) with photoactive layer processed from the nanoparticle dispersions prepared using chloroform as the miniemulsion dispersed phase solvent were found to have a power conversion efficiency (PCE) of 1.04%, which increased to 1.65% for devices utilizing NPs prepared from o-xylene. Physical, thermal and optical properties of NPs prepared using both chloroform and o-xylene were systematically studied using dynamic mechanical thermal analysis (DMTA) and photoluminescence (PL) spectroscopy and correlated to their photovoltaic properties. The PL results indicate different morphology of NPs in the solid state were achieved by varying miniemulsion dispersed phase solvent.

Polymer:fullerene nanoparticles (NPs) offer two key advantages over bulk heterojunction (BHJ) films for organic photovoltaics (OPVs), water-processability and potentially superior morphological control. Once an optimal active layer morphology is reached, maintaining this morphology at OPV operating temperatures is key to the lifetime of a device. Here we study the morphology of the PDPP-TNT (poly{3,6-dithiophene-2-yl-2,5-di(2-octyldodecyl)-pyrrolo[3,4-c]pyrrole-1,4-dione-alt-naphthalene}):PC71BM ([6,6]-phenyl C71 butyric acid methyl ester) NP system and then compare the thermal stability of NP and BHJ films to the common poly(3-hexylthiophene) (P3HT): phenyl C61 butyric acid methyl ester (PC61BM) system. We find that material T g plays a key role in the superior thermal stability of the PDPP-TNT:PC71BM system; whereas for the P3HT:PC61BM system, domain structure is critical.

Eu3+ ion doped CaF2 thin film was successfully prepared using the hydrothermal method and coated by a spin coating technique. A thin layer of ZnO was deposited on the Eu3+ doped CaF2 thin film by pulsed laser technique. Incorporation of the dopant into the CaF2 crystal was confirmed by x-ray powder diffraction and x-ray photoelectron spectroscopy (XPS). Excitation of the film at 227 nm produced the characteristic emissions of Eu3+ ions. The stability of the film under electron beam bombard was studied using Auger electron spectroscopy, cathodoluminescence (CL), and XPS. The CL and Auger peak-to-peak heights (APPHs) data were collected concurrently using the same electron beam. The APPH of Ca and O increased, while that of F decreased, which indicated the conversion of CaF2 to CaO. The CL emission decreased initially during degradation and stabilized beyond 48 C/cm2 for the film with the ZnO coating. XPS analysis also indicated the dissociation of the fluoride compounds and subsequent formation of oxide compounds such as CaO and EuO after electron beam degradation. [ABSTRACT FROM AUTHOR]

Here we report the application of a conjugated copolymer based on thiophene and quinoxaline units, namely poly[2,3-bis-(3-octyloxyphenyl)quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl] (TQ1), to nanoparticle organic photovoltaics (NP-OPVs). TQ1 exhibits more desirable material properties for NP-OPV fabrication and operation, particularly a high glass transition temperature (Tg) and amorphous nature, compared to the commonly applied semicrystalline polymer poly(3-hexylthiophene) (P3HT). This study reports the optimisation of TQ1:PC71BM (phenyl C71 butyric acid methyl ester) NP-OPV device performance by the application of mild thermal annealing treatments in the range of the Tg (sub-Tg and post-Tg), both in the active layer drying stage and post-cathode deposition annealing stage of device fabrication, and an in-depth study of the effect of these treatments on nanoparticle film morphology. In addition, we report a type of morphological evolution in nanoparticle films for OPV active layers that has not previously been observed, that of PC71BM nano-pathway formation between dispersed PC71BM-rich nanoparticle cores, which have the benefit of making the bulk film more conducive to charge percolation and extraction.