Search

Keggin H3PW12O40 (PW12) and Wells-Dawson H6P2W18O60 (P2W18) heteropolyacids (HPAs) are photo(catalysts) for various acid-promoted and redox catalytic reactions. Their activity increases if they are deposited on certain supports as metal oxides or carbon materials. Although the surface area and acid-base interactions of the HPAs with supports are considered as key factors for the performance of the binary material, the role of the local structure changes in the HPAs upon their immobilization on solids must be also of primary importance, directly affecting both acidity and photoredox properties. Here, the (photo)catalytic performance of Keggin and Wells-Dawson heteropolytungstates supported on boron nitride (BN) and two types of carbon nitride (C3N4) in the gas-solid 2-propanol dehydration to propene has been studied. Apart from characterizing the materials by a set of conventional laboratory-scale structural and physical-chemical techniques, an insight into the variations of the local structure of supported HPAs is provided by means of X-ray absorption spectroscopy (XAS), and their influence on the supported HPAs (photo)catalytic activity is discussed. The irradiation with UV light increased the activity of both heteropolytungstates with respect to the catalytic experiments. The apparent activation energy calculated for the photo-assisted process resulted always lower with respect to that obtained for the catalytic one alone. Moreover, the materials that showed the highest apparent turnover frequency (TOF) were those in which the HPAs were impregnated on graphitic C3N4 or on BN and, in particular, the highest TOF values were observed at the highest temperature for the PW12/BN and P2W18/BN samples. Interestingly, the highest activity of HPAs supported on BN seems to be due to the stabilization of the W octahedral coordination, according to the XAS data.

[EN] Keggin [PW12O40]3– and Wells–Dawson [P2W18O62]6– heteropolyanions are nanosized transition-metal-oxygen clusters belonging to the heteropolyacids (HPAs) family. They are widely used as catalysts due to their high Brønsted acidity, and their dispersion on solid supports favors the accessibility to their acid sites generally increasing the catalytic activity. A series of binary materials composed of Keggin or Wells–Dawson HPAs and SiO2, TiO2, and ZrO2 have been prepared by impregnation or solvothermal methods. Remarkable differences have been found in the catalytic activities among the unsupported and supported HPAs. These differences have been correlated in the past to the structural changes of the HPAs due to the cluster–support interaction, which is different depending on preparation methodologies of the binary material. In the present work, the modes of interaction between the two types of HPA, Keggin and Wells–Dawson, and various supports have been studied by X-ray absorption spectroscopy. The obtained data have been compared to the characterization of the same materials reported before by using different bulk and surface physicochemical techniques. The characterization results were then used to correlate the interaction modes between the HPAs and the supports with the catalytic performances reported for 2-propanol dehydration to propene and for propene hydration to 2-propanol. The results reveal that the deposition of HPA by impregnation or solvothermal treatment may cause distortions in the H3PW12O40 cluster structure depending on the presence of stronger (TiO2 and ZrO2) or weaker (SiO2) basic sites in the support, respectively. Moreover, the type of preparation method affects the structure and acidic properties of the supported HPAs. In particular, during the preparation of TiO2 and ZrO2 with HPA by in situ solvothermal method, the reaction of the HPA with the products of metal alkoxides hydrolysis occurs with consequent destruction of the Keggin structur

This work reports a study on the reactivity of polymeric carbon nitride (PCN) and PCN-H2O2 adduct samples for sunlight photocatalytic selective oxidation reactions. The characterization of these materials was reported in a previous paper where the reactivity towards the partial oxidation of 5-hydroxymethylfurfural (HMF) was studied by using two different laboratory scale photoreactors; one irradiated by UV lamps and the other one by natural sunlight. In the present study it has been confirmed the effectiveness of these C3N4 based materials for the selective partial oxidation of HMF to FDC (2,5-furandicarboxaldehyde) in aqueous medium in a pilot plant photoreactor irradiated by natural sunlight. The reactivity results and, in particular, the selectivity to FDC formation have been very encouraging, mostly by considering that the reaction was carried out in water. Moreover, they are comparable with those obtained in the laboratory scale photoreactors irradiated by both UV lamps and natural sunlight. Interestingly, the pristine PCN sample has shown a higher HMF conversion with respect to that of the PCN-H2O2 adduct, but the last one is more selective to the FDC formation. A kinetic study indicates that the pseudo-first-order rate constant of HMF oxidation is higher in the case of pristine photocatalyst and that the equilibrium adsorption constants of HMF is higher in the case of PCN-H2O2 adduct catalyst. Finally, the partial oxidation of two aromatic alcohols, i.e. benzyl alcohol (BA) and 4-methoxy benzyl alcohol (4-MBA) to benzaldehyde (BAL) and 4-methoxy benzaldehyde (4-MBAL), respectively, has also been studied.

Polymeric carbon nitride-hydrogen peroxide adduct (PCN-H2O2) has been prepared, thoroughly characterised and its application for selective photocatalytic conversion of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxaldehyde (FDC) in aqueous suspension has been studied. The PCN-H2O2 adduct is stable in aqueous suspension under UV and solar irradiation up to 100 °C. It is also stable up to 200 °C if heated in air, while at temperatures close to 300 °C its decomposition takes place. Based on the obtained characterisation data it has been proposed that H2O2 attaches to the non-polymerised carbon nitride species and to the heptazine nitrogen atoms, thus producing strong hydrogen bonding within the PCN-H2O2 adduct. The blockage of the surface amino-groups in PCN-H2O2 by H2O2 hinders the interaction of HMF with these sites, which are responsible for unselective substrate conversion. PCN-H2O2, although being less active, possesses a superior selectivity in natural solar light assisted oxidation of HMF to FDC reaching 80% with respect to its thermally etched PCN counterpart, which gives rise to a 40–50% selectivity. We believe that the exceptional performance of the applied photocatalyst in the selective photocatalytic conversion of HMF to a high added value FDC in a green solvent under natural illumination makes a significant contribution to the development of environmentally friendly technologies for biomass valorisation.

Composite microporous SiO2-TiO2 spheres and micro/mesoporous TiO2 spheres were prepared via the template-free two-step synthetic route using aqueous peroxotitanate solution and tetraethyl orthosilicate (TEOS) as precursors. Both the composite SiO2-TiO2 and pure TiO2 spheres prepared by the solvent-exchange method were initially non-porous, but the applied reflux treatment in water-ethanol suspension successfully transformed them into microporous materials with high apparent surface areas approaching 500 m2·g− 1 and the micropore volume of 0.17 cm3·g− 1, while maintaining the same morphology. The prepared composites retained high values of pore volume and specific surface area up to 400 °C of thermal treatment temperature. The crystallization of TiO2 into the anatase phase in the mixed oxide occurred only at 700 °C, that process was also accompanied by the significant reduction of pore volume, as well as apparent surface area values. The prepared materials were tested as adsorbents for the lead(II) removal; they demonstrated high adsorption capacities, reaching 340 mg(Pb2 +)·g− 1. Moreover, the mixed silica-titania oxide was found to be more efficient adsorbent at low pH values.

A set of bare and P-doped graphitic carbon nitride (g-C3N4) photocatalysts has been prepared by thermal condensation of melamine, urea or thiourea. For the sake of comparison, a g-C3N4 sample obtained in the presence of cyanuric acid and thermally exfoliated C3N4 powders were also studied. The materials were physicochemically characterized and their photocatalytic activity was studied for the selective oxidation of benzyl alcohol (BA), 4-methoxy benzyl alcohol (4-MBA) and piperonyl alcohol (PA) in water suspension both under UV and visible light irradiation. The influence of the type and position of the substituents on conversion and selectivity to aldehyde was remarkable. The presence of P in the C3N4 material improved the selectivity of the reaction towards the aldehyde.