Search

The self-assembly of nanocellulose in the form of cellulose nanofibers (CNFs) can be accomplished via hydrogen-bonding assistance into completely bio-based hydrogels. This study aimed to use the intrinsic properties of CNFs, such as their ability to form strong networks and high absorption capacity and exploit them in the sustainable development of effective wound dressing materials. First, TEMPO-oxidized CNFs were separated directly from wood (W-CNFs) and compared with CNFs separated from wood pulp (P-CNFs). Second, two approaches were evaluated for hydrogel self-assembly from W-CNFs, where water was removed from the suspensions via evaporation through suspension casting (SC) or vacuum-assisted filtration (VF). Third, the W-CNF-VF hydrogel was compared to commercial bacterial cellulose (BC). The study demonstrates that the self-assembly via VF of nanocellulose hydrogels from wood was the most promising material as wound dressing and displayed comparable properties to that of BC and strength to that of soft tissue. Validerad;2023;Nivå 2;2023-05-17 (hanlid);Licens full text: CC-BY: This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use. Credit must be given to the creator.

In this study, the effect of pectin extraction method on the properties of cellulose nanofibers (CNFs) isolated from sugar beet pulp (SBP) was studied. Pectin was extracted by the industrially practiced method by sulfuric acid hydrolysis or by enzymatic hydrolysis using a cellulase/xylanase enzymes mixture. The CNFs were then isolated by high-pressure homogenization and investigated in terms of their chemical composition, crystallinity, size, degree of polymerization, and re-dispersion in water after freeze-drying. The mechanical properties and surface characteristics of CNF films were also studied. The results showed that fibrillation of the de-pectinated SBP was more efficient for the acid hydrolyzed SBP. CNFs from the acid-hydrolyzed SBP had a slightly wider diameter, higher crystallinity, viscosity, and α-cellulose content but a lower degree of polymerization than CNFs from the enzyme-hydrolyzed SBP. Owing to the presence of more residual hemicelluloses in the CNFs from the enzyme-hydrolyzed SBP, the CNFs had higher re-dispersion ability in water. CNF films from enzyme-hydrolyzed SBP displayed slightly better mechanical properties and higher water contact angle than acid-hydrolyzed CNF films. Graphic abstract

This is the first study of the catalytic graphitization of Black Spruce (Picea mariana) which has successfully discovered the formation of single crystal graphitic carbon structures with a very high conductivity over 850 S/m implemented in the cathode of a coin cell battery. Renewable carbon with this conductivity is suitable for use in bio-electronics, organic thin film transistors, fuel cells, organic batteries, supercapacitors and sensing device applications. The P. mariana was doped with iron nitrate nanoparticle precursor, and sequentially thermo-catalyzed in presence of helium at temperatures between 300 and 800 °C. Transmission electron micrographs reveal formation of graphitic structures with an interplanar distance of ∼0.33 nm resembling single crystal graphite structure. Raman spectroscopy and X-ray diffraction studies confirm the presence of nano-layered carbon, and the high conductivity was observed in Fe-free residual graphite. Thus, using iron nitrate as a catalyst promotes the formation of single crystal graphitic structures at a significantly reduced thermal energy than traditional pyrolysis treatment and opens a new frontier for sustainable bio-electronics and energy materials manufacturing.

Considering the growing use of cellulose in various applications, knowledge and understanding of its physical properties become increasingly important. Thermal conductivity is a key property, but its variation with porosity and density is unknown, and it is not known if such a variation is affected by fiber size and temperature. Here, we determine the relationships by measurements of the thermal conductivity of cellulose fibers (CFs) and cellulose nanofibers (CNFs) derived from commercial birch pulp as a function of pressure and temperature. The results show that the thermal conductivity varies relatively weakly with density (ρsample = 1340–1560 kg m–3) and that its temperature dependence is independent of density, porosity, and fiber size for temperatures in the range 80–380 K. The universal temperature and density dependencies of the thermal conductivity of a random network of CNFs are described by a third-order polynomial function (SI-units): κCNF = (0.0787 + 2.73 × 10–3·T – 7.6749 × 10–6·T2 + 8.4637 × 10–9·T3)·(ρsample/ρ0)2, where ρ0 = 1340 kg m–3 and κCF = 1.065·κCNF. Despite a relatively high degree of crystallinity, both CF and CNF samples show amorphous-like thermal conductivity, that is, it increases with increasing temperature. This appears to be due to the nano-sized elementary fibrils of cellulose, which explains that the thermal conductivity of CNFs and CFs shows identical behavior and differs by only ca. 6%. The nano-sized fibrils effectively limit the phonon mean free path to a few nanometers for heat conduction across fibers, and it is only significantly longer for highly directed heat conduction along fibers. This feature of cellulose makes it easier to apply in applications that require low thermal conductivity combined with high strength; the weak density dependence of the thermal conductivity is a particularly useful property when the material is subjected to high loads. The results for thermal conductivity also suggest that the crystalline structures of cellulose remain stable up to at least 0.7 GPa.

Polylactic acid (PLA) is a biopolymer that has potential for use in food packaging applications; however, its low crystallinity and poor gas barrier properties limit its use. This study aimed to increase the understanding of the structure property relation of biopolymer blends and their nanocomposites. The crystallinity of the final materials and their effect on barrier properties was studied. Two strategies were performed: first, different concentrations of poly(hydroxybutyrate) (PHB; 10, 25, and 50 wt %) were compounded with PLA to facilitate the PHB spherulite development, and then, for further increase of the overall crystallinity, glycerol triacetate (GTA) functionalized chitin nanocrystals (ChNCs) were added. The PLA:PHB blend with 25 wt % PHB showed the formation of many very small PHB spherulites with the highest PHB crystallinity among the examined compositions and was selected as the matrix for the ChNC nanocomposites. Then, ChNCs with different concentrations (0.5, 1, and 2 wt %) were added to the 75:25 PLA:PHB blend using the liquid-assisted extrusion process in the presence of GTA. The addition of the ChNCs resulted in an improvement in the crystallization rate and degree of PHB crystallinity as well as mechanical properties. The nanocomposite with the highest crystallinity resulted in greatly decreased oxygen (O) and carbon dioxide (CO2) permeability and increased the overall mechanical properties compared to the blend with GTA. This study shows that the addition ChNCs in PLA:PHB can be a possible way to reach suitable gas barrier properties for food packaging films.

Bio-based wood materials are preferable for composites because of their sustainability, but adequately dispersing wood fibers in polymers can be difficult and costly. Our approach was to pretreat t...

Cellulose nanofibrils (CNFs) are top-down nanomaterials obtainable from abundant lignocelluloses. Despite recent advances in processing technologies, the effects of variations in the lignocellulose structure and composition on CNF isolation and properties are poorly understood. In this study, we compared the isolation of CNFs from tension wood (TW) and normal wood (NW) from Populus tremula (aspen). The TW has a higher cellulose content, native cellulose fibrils with a larger crystalline diameter, and less lignin than the NW, making it an interesting material for CNF isolation. The wood powders were oxidized directly by 2,2,6,6-tetramethylpiperidin-1-oxyl, and the morphology and mechanical behaviors of the nanofibril suspensions and networks were characterized. The TW was more difficult to fibrillate by both chemical and mechanical means. Larger nanofibrils (5–10 nm) composed of 1.2 nm structures were present in the TW CNFs, whereas the NW samples contained more of thin (1.6 nm) structures, which also comprised 77% of the solid yield compared to the 33% for TW. This difference was reflected in the TW CNF networks as decreased transmittance (15% vs. 50%), higher degree of crystallinity (85.9% vs. 78.0%), doubled toughness (11 MJ/m3) and higher elongation at break (12%) compared to NW. The difference was ascribed to greater preservation of the hierarchical, more crystalline microfibril structure, combined with a more cellulose-rich network (84% vs. 70%). This knowledge of the processing, structure, and properties of CNFs can facilitate the breeding and design of wood feedstocks to meet the increasing demand for nanoscale renewable materials. Graphic abstract

This study aims to utilize the natural composition of brown seaweed by deriving alginate and cellulose concurrently from the stipe (stem-like) and blade (leaf-like) structures of the seaweed; further, this is followed by fibrillation for the direct and resource-efficient preparation of alginate/cellulose nanofiber (CNF) hybrid inks for three-dimensional (3D) printing of hydrogels. The efficiency of the fibrillation process was evaluated, and the obtained gels were further studied with regard to their rheological behavior. As a proof of concept, the inks were 3D printed into discs, followed by cross-linking with CaCl2 to form biomimetic hydrogels. It was shown that the nanofibrillation process from both seaweed structures is very energy-efficient, with an energy demand lower than 1.5 kW h/kg, and with CNF dimensions below 15 nm. The inks displayed excellent shear-thinning behavior and cytocompatibility and were successfully printed into 3D discs that, after cross-linking, exhibited an interconnected network structure with favorable mechanical properties, and a cell viability of 71%. The designed 3D biomimetic hydrogels offers an environmentally benign, cost-efficient, and biocompatible material platform with a favorable structure for the development of biomedical devices, such as 3D bio printing of soft tissues. Funding Agencies|Swedish Foundation for Strategic Research within the HEALiX projectSwedish Foundation for Strategic Research [RMX18-0039]; European Regional Development Fund under the Interreg Nord within the Sea -Surf-Snow project [20201287]; Bio4Energy-a strategic research environment

Energy storage devices such as supercapacitors of high performance are in great need due to the continuous expansion of digitalization and related devices for mobile electronics, autonomous sensors...

Cellulose nanofibrils can be derived from the native load-bearing cellulose microfibrils in wood. These microfibrils are synthesized by a cellulose synthase enzyme complex residing in the plasma membrane of developing wood cells. In addition to the cellulose synthase complex several other proteins, including cellulose synthase interacting 1 (CSI1), facilitate cellulose biosynthesis. It was previously shown that transgenic hybrid aspen trees with reduced expression of CSI1 exhibit changes in wood mechanics and cellulose microfibril properties. We hypothesized that these changes in native cellulose may impact the quality of corresponding nanofibrils. To investigate this hypothesis wood from wild type and transgenic trees with reduced expression of CSI1 was subjected to oxidative nanofibril isolation processes. The transgenic wood extracted nanofibrils exhibited a significantly lower suspension viscosity and estimated surface area. Furthermore, the manufactured nanofibril networks exhibited a higher stiffness, reduced water-uptake, tensile strength, strain-to-break and degree of polymerization compared to wild type derived nanofibrils. It was concluded that the difference in wood properties caused by decreased expression of CSI1 gave rise to nanofibrils with distinctive qualities. The observed changes in the physicochemical properties suggest that the differences are caused by changes in apparent nanofibril aspect ratio and surface accessibility. This study demonstrates the possibility to influence wood derived nanofibril quality through genetic engineering of trees and opens for breeding of wood properties for extraction of nanomaterials with defined characteristics.

This study focuses on the use of pilot-scale produced polyhydroxy butyrate (PHB) biopolymer and chitin nanocrystals (ChNCs) in two different concentrated (1 and 5 wt.%) nanocomposites. The nanocomposites were compounded using a twin-screw extruder and calendered into sheets. The crystallization was studied using polarized optical microscopy and differential scanning calorimetry, the thermal properties were studied using thermogravimetric analysis, the viscosity was studied using a shear rheometer, the mechanical properties were studied using conventional tensile testing, and the morphology of the prepared material was studied using optical microscopy and scanning electron microscopy. The results showed that the addition of ChNCs significantly affected the crystallization of PHB, resulting in slower crystallization, lower overall crystallinity, and smaller crystal size. Furthermore, the addition of ChNCs resulted in increased viscosity in the final formulations. The calendering process resulted in slightly aligned sheets and the nanocomposites with 5 wt.% ChNCs evaluated along the machine direction showed the highest mechanical properties, the strength increased from 24 to 33 MPa, while the transversal direction with lower initial strength at 14 MPa was improved to 21 MPa. Validerad;2022;Nivå 2;2022-02-18 (johcin)

CO2 adsorption is a promising strategy to reduce costs and energy use for CO2 separation. In this study, we developed CO2 adsorbents based on lightweight and flexible cellulose nanofiber aerogels with monolithic structures prepared via freeze-casting, and cellulose acetate or acetylated cellulose nanocrystals (a-CNCs) were introduced into the aerogels as functional materials using an impregnation method to provide CO2 affinity. The microstructure of the adsorbent was examined using scanning electron microscopy, and compression tests were performed to analyze the mechanical properties of the adsorbents. The CO2 adsorption behavior was studied by recording the adsorption isotherms and performing column breakthrough experiments. The samples showed excellent mechanical performance and had a CO2 adsorption capacity of up to 1.14 mmol/g at 101 kPa and 273 K. Compared to the adsorbent which contains cellulose acetate, the one impregnated with a-CNCs had better CO2 adsorption capacity and axial mechanical properties owing to the building of a nanoscale scaffold on the surface of the adsorbent. Although the CO2 adsorption capacity could be improved further, this paper reports a potential CO2 adsorbent that uses all cellulose-based materials, which is beneficial for the environment from both resource and function perspectives. Moreover, the interesting impregnation process provides a new method to attach functional materials to aerogels, which have potential for use in many other applications.

In current times, CO2 capture and lightweight energy storage are receiving significant attention and will be vital functions in next-generation materials. Porous carbonaceous materials have great potential in these areas, whereas most of the developed carbon materials still have significant limitations, such as nonrenewable resources, complex and costly processing, or the absence of tailorable structure. In this study, a new strategy is developed for using the currently underutilized lignin and cellulose nanofibers, which can be extracted from renewable resources to produce high-performance multifunctional carbon aerogels with a tailorable, anisotropic pore structure. Both the macro- and microstructure of the carbon aerogels can be simultaneously controlled by carefully tuning the weight ratio of lignin to cellulose nanofibers in the precursors, which considerably influences their final porosity and surface area. The designed carbon aerogels demonstrate excellent performance in both CO2 capture and capacitive energy storage, and the best results exhibit a CO2 adsorption capacity of 5.23 mmol g–1 at 273 K and 100 kPa and a specific electrical double-layer capacitance of 124 F g–1 at a current density of 0.2 A g–1, indicating that they have great future potential in the relevant applications.

Cellulose nanofibre coatings were treated by a dielectric barrier discharge plasma in a He/NH3 gas mixture at atmospheric pressure. Ultrasound was optionally irradiated during the treatment. The treatment enhanced the wetting of deionized water, glycerol, and uncured epoxy. Irradiation of ultrasound did not significantly change optical emission from the plasma, but increased the oxygen contents and enhanced etching and roughening at the nanofibre coating surfaces. Furthermore, the irradiation of ultrasound enhanced the wetting of deionized water and glycerol drastically, while that of uncured epoxy to some extent.

The design and high-throughput manufacturing of thin renewable energy devices with high structural and atomic configurational stability are crucial for the fabrication of green electronics. Yet, this concept is still in its infancy. In this work, we report the extraordinary durability of thin molecular interlayered organic flexible energy devices based on chemically tuned cellulose nanofiber transparent films that outperform glass by decreasing the substrate weight by 50%. The nanofabricated flexible thin film has an exceptionally low thermal coefficient of expansion of 1.8 ppm/K and a stable atomic configuration under a harsh fabrication condition (over 190 °C for an extended period of 5 h). A flexible optoelectronic device using the same renewable cellulose nanofiber film substrate was found to be functionally operational over a life span of 5 years under an intermittent operating condition. The success of this device's stability opens up an entirely new frontier of applications of flexible electronics.

The development of bio-based nanocomposites is of high scientific and industrial interest, since they offer excellent advantages in creating functional materials. However, dispersion and distribution of the nanomaterials inside the polymer matrix is a key challenge to achieve high-performance functional nanocomposites. In this context, for better dispersion, biobased triethyl citrate (TEC) as a dispersing agent in a liquid-assisted extrusion process was used to prepare the nanocomposites of poly (lactic acid) (PLA) and chitin nanocrystals (ChNCs). The aim was to identify the effect of the TEC content on the dispersion of ChNCs in the PLA matrix and the manufacturing of a functional nanocomposite. The nanocomposite film’s optical properties, microstructure, migration of the additive and nanocomposites’ thermal, mechanical and rheological properties, all influenced by the ChNC dispersion, were studied. The microscopy study confirmed that the dispersion of the ChNCs was improved with the increasing TEC content, and the best dispersion was found in the nanocomposite prepared with 15 wt% TEC. Additionally, the nanocomposite with the highest TEC content (15 wt%) resembled the mechanical properties of commonly used polymers like polyethylene and polypropylene. The addition of ChNCs in PLA-TEC15 enhanced the melt viscosity, as well as melt strength, of the polymer and demonstrated antibacterial activity.

In this study, the effect of pectin extraction method on the properties of cellulose nanofibers (CNFs) isolated from sugar beet pulp (SBP) was studied. Pectin was extracted by the industrially practiced method by sulfuric acid hydrolysis or by enzymatic hydrolysis using a cellulase/xylanase enzymes mixture. The CNFs were then isolated by high-pressure homogenization and investigated in terms of their chemical composition, crystallinity, size, degree of polymerization, and re-dispersion in water after freeze-drying. The mechanical properties and surface characteristics of CNFs films were also studied. The results showed that fibrillation of the de-pectinated SBP was more efficient for the acid hydrolyzed SBP. CNFs from the acid-hydrolyzed SBP had a slightly wider diameter, higher crystallinity, viscosity, and α-cellulose content but a lower degree of polymerization than CNFs from the enzyme-hydrolyzed SBP. Owing to the presence of more residual hemicelluloses in the CNFs from the enzyme-hydrolyzed SBP, the CNFs had higher re-dispersion ability in water. CNFs films from enzyme-hydrolyzed SBP displayed slightly better mechanical properties and higher water contact angles than acid-hydrolyzed CNF films.

The next generation of green insulation materials is being developed to provide safer and more sustainable alternatives to conventional materials. Bio-based cellulose nanofiber (CNF) aerogels offer excellent thermal insulation properties; however, their high flammability restricts their application. In this study, the design concept for the development of a multifunctional and non-toxic insulation material is inspired by the natural composition of seaweed, comprising both alginate and cellulose. The approach includes three steps: first, CNFs were separated from alginate-rich seaweed to obtain a resource-efficient, fully bio-based, and inherently flame-retardant material; second, ice-templating, followed by freeze-drying, was employed to form an anisotropic aerogel for effective insulation; and finally, a simple crosslinking approach was applied to improve the flame-retardant behavior and stability. At a density of 0.015 g cm⁻³, the lightweight anisotropic aerogels displayed favorable mechanical properties, including a compressive modulus of 370 kPa, high thermal stability, low thermal conductivity (31.5 mW m⁻¹ K⁻¹), considerable flame retardancy (0.053 mm s⁻¹), and self-extinguishing behavior, where the inherent characteristics were considerably improved by crosslinking. Different concentrations of the crosslinker altered the mechanical properties, while the anisotropic structure influenced the mechanical properties, combustion velocity, and to some extent thermal conductivity. Seaweed-derived aerogels possess intrinsic characteristics that could serve as a template for the future development of sustainable high-performance insulation materials.

Carbon aerogels prepared from low-cost renewable resources are promising electrode materials for future energy storage applications. However, their electrochemical properties must be significantly improved to match the commercially used high-carbon petroleum products. This paper presents a facile method for the green synthesis of carbon aerogels (CAs) from lignocellulosic materials and graphene dots (GDs) from commercially available biochar. The produced carbon aerogels exhibited a hierarchical porous structure, which facilitates energy storage by forming an electrical double-layer capacitance. Surprisingly, the electrochemical analyses of the GD-doped carbon aerogels revealed that in comparison to pristine carbon aerogels, the surface doping of GDs enhanced the electrochemical performance of carbon aerogels, which can be attributed to the combined effect from both double-layer capacitance and pseudocapacitance. Herein, we designed and demonstrated the efficacy of a supercapacitor device using our green carbon electrode as a sustainable option. These green carbon aerogels have opened a window for their practical use in designing sustainable energy storage devices. Validerad;2021;Nivå 2;2021-11-30 (johcin)

Fiber reinforced materials were a quintessential ingredient in the manufacturing arena of humans since Stone Age. By dispersing the reinforcing fiber in a suitable matrix, novel functional materials could be developed. Carbon fibers and glass fibers are considered as important class of reinforcing fibers in polymer matrices owing to their high strength. Carbon fiber is five times stronger and two times stiffer than steel. Moreover, being a light weight material it is an ideal candidate for many high-end applications. Glass fiber has comparatively less stiffness than other reinforcing fibers, but it possesses the distinct advantage of having high specific strength and is cost effective. Glass fiber is a promising material to be used as a major reinforcement fiber because of its availability and ease of use. Elastomeric polymers are extensively used as matrices in polymer composites, because of their outstanding visco-elastic properties, flexibility and wide choice of fillers. This chapter gives an overview of the evolution, synthesis, mechanical, thermal and visco elastic characteristics of carbon fiber and glass fiber reinforced elastomeric composites coupled with their potential applications.

In this study, ginger residue from juice production was evaluated as a raw material resource for preparation of nanofiber hydrogels with multifunctional properties for advanced wound dressing applications. Alkali treatment was applied to adjust the chemical composition of ginger fibers followed by TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidation prior to nanofiber isolation. The effect of alkali treatment on hydrogel properties assembled through vacuum filtration without addition of any chemical cross-linker was evaluated. An outstanding absorption ability of 6200% combined with excellent mechanical properties, tensile strength of 2.1 +/- 0.2 MPa, elastic modulus of 15.3 +/- 0.3 MPa, and elongation at break of 25.1%, was achieved without alkali treatment. Furthermore, the absorption capacity was tunable by applying alkali treatment at different concentrations and by adjusting the hydrogel grammage. Cytocompatibility evaluation of the hydrogels showed no significant effect on human fibroblast proliferation in vitro. Ginger essential oil was used to functionalize the hydrogels by providing antimicrobial activity, furthering their potential as a multifunctional wound dressing. Funding Agencies|Swedish Foundation for Strategic Research within the HEALiX projectSwedish Foundation for Strategic Research [RMX18-0039]; Bio4Energy; KAW [2018.0451]; WWSC; Kempe Foundations; Coordenacao de Aperfeicamento de Pessoal de Nivel Superior, Brasil (CAPES) [001]

The present century has witnessed composite materials to be the most promising and shrewd material for a variety of applications. Among them fiber (natural or synthetic) reinforced composites (FRCs) have gained significant interest owing to the high demand for lightweight materials with high strength for specific applications. The advantages of FRCs include high strength to weight ratio, high durability and stiffness, good damping behavior, flexural strength and most importantly good resistance to corrosion, wear, impact and fire (depending on the matrix and fiber reinforcement). The presence of such wide array of properties for FRCs have led to them being used extensively in a number of applications including mechanical, aerospace, automotive, marine, sports, biomedical, construction etc. The past decades have visualized exciting research in the area of FRC's which helped to unveil the properties of these exciting materials further and consign them in appropriate applications. These FRCs have shown outstanding performance in different fields of applications and hence have been promoted by researchers as promising alternatives to solitary metals and alloys. The global demand for fiber reinforced composites is expected to grow at a faster pace with the aerospace industry occupying the top position in the years to come. Major driving factors for the rising demand is none other than the high strength to weight ratio, corrosion resistance, energy absorption on impact, moisture and chemical resistance possessed by these materials. This chapter gives a general overview on the characteristics and processing of FRC's that are systematically outlined in this book.