Search

Introduction: Improving the robustness of myoelectric control to work over many months without the need for recalibration could reduce prosthesis abandonment. Current approaches rely on post-hoc error detection to verify the certainty of a decoder's prediction using predefined threshold value. Since the decoder is fixed, the performance decline over time is inevitable. Other approaches such as supervised recalibration and unsupervised self- recalibration entail limitations in scaling up and computational resources. The objective of this paper is to study active learning as a scalable, human-in-the- loop framework, to improve the robustness of myoelectric control. Method: Active learning and linear discriminate analysis methods were used to create an iterative learning process, to modify decision boundaries based on changes in the data. We simulated a real-time scenario. We exploited least confidence, smallest margin and entropy reduction sampling strategies in single and batch-mode sample selection. Optimal batch-mode sampling was considered using ranked batch-mode active learning. Results: With only 3.2 min of data carefully selected by the active learner, the decoder outperforms random sampling by 4-5 and -2% for able-bodied and people with limb difference, respectively. We observed active learning strategies to systematically and significantly enhance the decoders adaptation while optimizing the amount of training data on a class-specific basis. Smallest margin and least confidence uncertainty were shown to be the most supreme. Discussion: We introduce for the first time active learning framework for long term adaptation in myoelectric control. This study simulates closed-loop environment in an offliine manner and proposes a pipeline for future real-time deployment. [ABSTRACT FROM AUTHOR]

Improving the robustness of myoelectric control to work over many months without the need for recalibration could reduce prosthesis abandonment. Current approaches rely on post-hoc error detection to verify the certainty of a decoder’s prediction using predefined threshold value. Since the decoder is fixed, the performance decline over time is inevitable. Other approaches such as supervised recalibration and unsupervised self- recalibration entail limitations in scaling up and computational resources. The objective of this paper is to study active learning as a scalable, human-in-the- loop framework, to improve the robustness of myoelectric control. Method: Active learning and linear discriminate analysis methods were used to create an iterative learning process, to modify decision boundaries based on changes in the data. We simulated a real-time scenario. We exploited least confidence, smallest margin and entropy reduction sampling strategies in single and batch-mode sample selection. Optimal batch-mode sampling was considered using ranked batch-mode active learning. Results: With only 3.2 min of data carefully selected by the active learner, the decoder outperforms random sampling by 4–5 and ∼2% for able-bodied and people with limb difference, respectively. We observed active learning strategies to systematically and significantly enhance the decoders adaptation while optimizing the amount of training data on a class-specific basis. Smallest margin and least confidence uncertainty were shown to be the most supreme. Discussion: We introduce for the first time active learning framework for long term adaptation in myoelectric control. This study simulates closed-loop environment in an offine manner and proposes a pipeline for future real-time deployment. [ABSTRACT FROM AUTHOR]

Hand amputation can dramatically affect the capabilities of a person. Cortical reorganization occurs in the brain, but the motor and somatosensorial cortex can interact with the remnant muscles of the missing hand even many years after the amputation, leading to the possibility to restore the capabilities of hand amputees through myoelectric prostheses. Myoelectric hand prostheses with many degrees of freedom are commercially available and recent advances in rehabilitation robotics suggest that their natural control can be performed in real life. The first commercial products exploiting pattern recognition to recognize the movements have recently been released, however the most common control systems are still usually unnatural and must be learned through long training. Dexterous and naturally controlled robotic prostheses can become reality in the everyday life of amputees but the path still requires many steps. This mini-review aims to improve the situation by giving an overview of the advancements in the commercial and scientific domains in order to outline the current and future chances in this field and to foster the integration between market and scientific research. [ABSTRACT FROM AUTHOR]

Cochlear implants (CIs) require efficient speech processing to maximize information transmission to the brain, especially in noise. A novel CI processing strategy was proposed in our previous studies, in which sparsity-constrained non-negative matrix factorization (NMF) was applied to the envelope matrix in order to improve the CI performance in noisy environments. It showed that the algorithm needs to be adaptive, rather than fixed, in order to adjust to acoustical conditions and individual characteristics. Here, we explore the benefit of a system that allows the user to adjust the signal processing in real time according to their individual listening needs and their individual hearing capabilities. In this system, which is based on MATLAB®, SIMULINK® and the xPC Target™ environment, the input/outupt (I/O) boards are interfaced between the SIMULINK blocks and the CI stimulation system, such that the output can be controlled successfully in the manner of a hardware-in-the-loop (HIL) simulation, hence offering a convenient way to implement a real time signal processing module that does not require any low level language. The sparsity constrained parameter of the algorithm was adapted online subjectively during an experiment with normal-hearing subjects and noise vocoded speech simulation. Results show that subjects chose different parameter values according to their own intelligibility preferences, indicating that adaptive real time algorithms are beneficial to fully explore subjective preferences. We conclude that the adaptive real time systems are beneficial for the experimental design, and such systems allow one to conduct psychophysical experiments with high ecological validity. [ABSTRACT FROM AUTHOR]

The unknown composition of residual muscles surrounding the stump of an amputee makes optimal electrode placement challenging. This often causes the experimental set-up and calibration of upper-limb prostheses to be time consuming. In this work, we propose the use of existing dimensionality reduction techniques, typically used for muscle synergy analysis, to provide meaningful real-time functional information of the residual muscles during the calibration period. Two variations of principal component analysis (PCA) were applied to electromyography (EMG) data collected during a myoelectric task. Candid covariance-free incremental PCA (CCIPCA) detected task-specific muscle synergies with high accuracy using minimal amounts of data. Our findings offer a real-time solution towards optimizing calibration periods.

Myoelectric prostheses are commonly controlled by surface EMG. Many control algorithms, including the user learning-based control paradigm abstract control, benefit from independent control signals. Measuring at the surface of the skin reduces the signal independence through cross talk. To increase the number of independent signals, intramuscular EMG recordings might be a viable alternative for myoelectric control. This proof of concept study investigated if real time abstract myoelectric control is possible with intramuscular measurements. Six participants performed a 4-target and 12-target abstract control task with both surface and intramuscular EMG recordings. The results suggest that intramuscular EMG is suitable for abstract control, and that performance could be increased in the future by stabilizing the amplitude of the processed intramuscular EMG signal.

Magnetomyography utilizes magnetic sensors to record small magnetic fields produced by the electrical activity of muscles, which also gives rise to the electromyogram (EMG) signal typically recorded with surface electrodes. Detection and recording of these small fields requires sensitive magnetic sensors possibly equipped with a CMOS readout system. This paper presents a highly sensitive Hall sensor fabricated in a standard $0.18~\mu \mathrm {m}$ CMOS technology for future low-field MMG applications. Compared with previous works, our experimental results show that the proposed Hall sensor achieves a higher current mode sensitivity of approximately 2400 V/A/mT. Further refinement is required to enable measurement of MMG signals from muscles.

Recent studies indicate the limited clinical acceptance of myoelectric prostheses, as upper extremity amputees need improved functionality and more intuitive, effective, and coordinated control of their artificial limbs. Rather than exclusively classifying the electromyogram (EMG) signals, it has been shown that inertial measurements (IMs) can form an excellent complementary signal to the EMG signals to improve the prosthetic control robustness. We present an investigation into the possibility of replacing, rather than complementing, the EMG signals with IMs. We hypothesize that the enhancements achieved by the combined use of the EMG and IM signals may not be significantly different from that achieved by the use of Magnetometer (MAG) or Accelerometer (ACC) signals only, when the temporal and spatial information aspects are considered. A large dataset comprising recordings with 20 ablebodied and two amputee participants, executing 40 movements, was collected. A systematic performance comparison across a number of feature extraction methods was carried out to test our hypothesis. Results suggest that, individually, each of the ACC and MMG signals can form an excellent and potentially independent source of control signal for upper-limb prostheses, with an average classification accuracy of $\approx 93$% across all subjects. This study suggests the feasibility of moving from surface EMG to IM signals as a main source for upper-limb prosthetic control in real-life applications.

Modern, commercially available hand prostheses offer the potential of individual digit control. However, this feature is often not utilized due to the lack of a robust scheme for finger motion estimation from surface electromyographic (EMG) measurements. Regression methods have been proposed to achieve closed-loop finger position, velocity, or force control. In this paper, we propose an alternative approach, based on open-loop action-based control, which could be achieved through simultaneous finger motion classification. We compare the efficacy of continuous closed-loop and discrete open-loop control on the task of controlling the five degrees of actuation (DOAs) of a dexterous robotic hand. Eight normally-limbed subjects were instructed to teleoperate the hand using a data glove and the two control schemes under investigation in order to match target postures presented to them on a screen as closely as possible. Results indicate that, firstly, the performance of the two control methods is comparable and, secondly, that experience can lead to significant performance improvement over time, regardless of the method used. These results suggest that prosthetic finger control in a continuous space can be potentially achieved by means of myoelectric classification and discrete, action-based control and hence encourage further research in this direction.

One way of enhancing the dexterity of powered myoelectric prostheses is via proportional and simultaneous control of multiple degrees-of-freedom (DOFs). Recently, it has been demonstrated that the reconstruction of finger movement is feasible by using features of the surface electromyogram (sEMG) signal. In such paradigms, the number of predictors and target variables is usually large, and strong correlations are present in both the input and output domains. Synergistic patterns in the sEMG space have been previously exploited to facilitate kinematics decoding. In this work, we propose a framework for simultaneous input-output dimensionality reduction based on the generalized eigenvalue problem formulation of multiple linear regression (MLR). We demonstrate that the proposed methodology outperforms simultaneous input-output dimensionality reduction based on principal component analysis (PCA), while the prediction accuracy of the full rank regression (FRR) method can be achieved by using only a few relevant dimensions.

Motor cortical local field potentials (LFPs) have been successfully used to decode both kinematics and kinetics of arm movement. For future clinically viable prostheses, however, brain activity decoders will have to generalize well under a wide spectrum of behavioral conditions. This property has not yet been demonstrated clearly. Here, we provide evidence for the first time, that an LFP-based electromyogram (EMG) decoder can generalize reasonably well across two different types of behavior. We implanted intracortical microelectrode arrays in the primary motor (M1) and ventral pre-motor (PMv) cortices of a rhesus macaque, and recorded LFP and EMG activity from arm and hand muscles of the contralateral forelimb during a two-dimensional (2-D) centre-out isometric wrist torque task (TT), and during free reach and grasp behavior (FB). Selected temporal and spectral features of the LFP signals were used to train EMG decoders using data from both types of behavior separately. We assessed the decoding performance for both within- and across-task cases. The average achieved generalization score was 65 ± 20%, while in many cases individual scores reached 100%.