Search

Analytical Quality by Design principles using the design of experiments were applied for the development of a capillary electrophoresis method for the determination of enantiomeric purity and chemically related impurities of tamsulosin. From initial scouting experiments, a dual cyclodextrin (CD) system composed of sulfated β-CD and carboxymethyl-α-CD was selected as the chiral selector. A fractional factorial resolution V+ design was used for the identification of the critical process parameters, while a face-centered central composite design and Monte Carlo simulations were employed for final optimization and defining the design space of the method. The experimental conditions of the working point were: 30 mM sodium phosphate buffer, pH 3.0, containing 40 mg/mL sulfated β-CD and 7 mg/mL carboxymethyl-α-CD, capillary temperature 18°C, applied voltage -23 kV. Following the assessment of robustness by applying a Plackett-Burman design, the method was validated according to the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use guideline Q2(R1). The method allowed the quantification of the chiral impurity and three other related impurities at the 0.1 % level with acceptable accuracy and precision., (© 2023 The Authors. Journal of Separation Science published by Wiley-VCH GmbH.)

The complex formation between daclatasvir and γ-CD or heptakis(2,3,6-tri-O-methyl)-β-CD (TM-β-CD) was studied by isothermal titration calorimetry and molecular modeling. Both techniques supported the predominant formation of a 2:1 complex in case of γ-CD although a 1:1 complex may be formed to a much lower extent as well. In case of TM-β-CD the stoichiometry of the complex was exclusively 1:1. Complex formation with γ-CD did not require dissociation of the daclatasvir dimer, which is present in solution, and resulted in a complex with a binding constant of 1.67·10 7  M -2 . In contrast, formation of the weak TM-β-CD complex (K = 371 M -1 ) required dissociation of the daclatasvir dimer. This is in line with the observation that the complex formation in case of γ-CD is enthalpy-driven, while the process is entropy-driven in case of TM-β-CD. It is concluded that the plateau observed in capillary electrophoresis is primarily based on the slow dissociation of the daclatasvir-CD complexes caused by steric constrains due to the folded terminal amino acid moieties of daclatasvir exerting a clip effect. In case γ-CD the thermodynamic stability might contribute to the overall slow dissociation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Silodosin is a single isomer selective α 1 -adrenoreceptor antagonist used for the treatment of benign prostatic hyperplasia. In order to control the enantiomeric purity of the drug a capillary electrophoresis method was developed that is applicable to the analysis of drug substance as well as pharmaceutical formulations. Method development followed a quality by design strategy. After selection of carboxymethyl-β-cyclodextrin as suitable chiral selector and the starting conditions in the scouting phase, a two-level full factorial design was applied to identify the critical process parameters. The final method optimization was performed using a face-centered central composite design resulting in the conditions 100 mM sodium phosphate buffer, pH 2.9, containing 40 mg/mL car-boxymethyl-β-cyclodextrin, a capillary temperature of 17 °C and an applied voltage of 28 kV. Robustness testing employing a Plackett-Burman design revealed the importance of careful pH adjustment in order to achieve suitable peak shape and resolution. The method was validated according to the guideline Q2(R1) of the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use and applied to the analysis of a commercial capsule formulation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

A CE method was developed and validated for the assessment of the chiral purity of the drug tenofovir applying a quality by design approach. Following selection of a quaternary ammonium β-CD as chiral selector, a fractional factorial resolution V+ design was employed for identification of the critical process parameters, while a central composite design served for method optimization. The final method used a 40/50.2 cm, 50 μm id fused-silica capillary, a BGE composed of a 100 mM sodium phosphate buffer, pH 6.4, containing 45 mg/mL quaternary ammonium β-CD, an applied voltage of 18 kV, and a capillary temperature of 22°C. Robustness was assessed by a Plackett-Burman design. The method was validated according to guideline Q2(R1) of the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use and enabled the determination of the (S)-enantiomer of tenofovir at the 0.1% level., (© 2022 The Authors. Electrophoresis published by Wiley-VCH GmbH.)

The separation of daclatasvir and its R,R,R,R-enantiomer was studied by capillary electrophoresis using various randomly methylated β-CDs and the single isomer heptakis(2,6-di-O-methyl)-β-CD (2,6-DM-β-CD) as chiral selectors in an acidic background electrolyte. Opposite enantiomer migration order was observed for randomly substituted CDs compared to 2,6-DM-β-CD as well as methylated β-CDs with different composition according to the specifications of the manufacturers. HPLC and NMR analyses confirmed that the presence of a high 2,6-DM-β-CD content in the CDs enables to achieve the migration order R,R,R,R-enantiomer > daclatasvir. In contrast, products with low 2,6-DM-β-CD isomer content and/or the presence of a large amount of methylated CD isomers, in which d-glucopyranose moieties are not substituted in either position 2 or 6, displayed the opposite enantiomer migration order daclatasvir > R,R,R,R-enantiomer. The study indicated the importance of the type and composition of derivatized CDs on chiral separations in capillary electrophoresis as well as the importance of proper quality control for cyclodextrin manufacturers. Moreover, the observed migration order could be rationalized based on the composition and substitution pattern of the CDs., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021. Published by Elsevier B.V.)

In capillary electrophoresis an enantioseparation of daclatasvir (DCV) was observed in case of heptakis(2,6-di-O-methyl)-β-CD, heptakis(2-O-methyl)-β-CD and β-CD, while two peaks with a plateau were noted for heptakis(2,3,6-tri-O-methyl)-β-CD and heptakis(2,3-di-O-methyl)-β-CD indicating a slow equilibrium. Heptakis(6-O-methyl)-β-CD and heptakis(3-O-methyl)-β-CD yielded broad peaks. Nuclear magnetic resonance experiments including nuclear Overhauser effect-based techniques revealed inclusion complex formation for all CDs with the biphenyl ring of DCV within the cavity and the valine-pyrrolidine moieties protruding from the torus. However, in case of heptakis(2,6-di-O-methyl)-β-CD, heptakis(2-O-methyl)-β-CD and β-CD higher order structures with 1:3 stoichiometry were concluded, where the valine moieties enter additional CD molecules via the secondary side. Heptakis(2,3,6-tri-O-methyl)-β-CD and heptakis(2,3-di-O-methyl)-β-CD yielded primarily 1:1 complexes. Higher order complexes between DCV and heptakis(2,6-di-O-methyl)-β-CD were corroborated by mass spectrometry. Complex stoichiometry was not the reason for the slow equilibrium yielding the plateau observed in capillary electrophoresis, but structural characteristics of the CDs especially complete methylation of the secondary rim., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Capillary electrophoresis is a powerful technique for the analysis of polar chiral compounds and has been widely accepted for analytical enantioseparations of drug compounds in pharmaceuticals and biological media. In addition, many mechanistic studies have been conducted in an attempt to rationalize enantioseparations in combination with spectroscopic and computational techniques. The present review will focus on recent examples of mechanistic aspects and summarize recent applications of stereoselective pharmaceutical and biomedical analysis published between January 2017 and November 2020. Various separation modes including electrokinetic chromatography in combination with several detection modes including laser-induced fluorescence, mass spectrometry and contactless conductivity detection will be discussed. A general trend also observed in other analytical techniques is the application of quality by design principles in method development and optimization., (© 2021 The Authors. Electrophoresis published by Wiley-VCH GmbH.)

Dolutegravir is an integrase strand transfer inhibitor used for the treatment of human immuno-deficiency virus infections. The present study was conducted in order to identify degradation products formed in acidic solution upon heating. The structures were assigned based on low resolution collision-induced dissociation tandem mass spectra as well as high resolution higher-energy collisional dissociation tandem mass spectra. The major degradation products resulted from hydrolytic opening of the oxepine ring leading to bis-hydroxy diastereomers (DP2 and DP3) as well as a mono-hydroxy derivative (DP1) as the result of dehydration of the diastereomers. Furthermore, two carboxylic acid derivatives (DP4 and DP5) could be identified, which can be explained as the result of the hydrolysis of the exocyclic amide bond of dolutegravir and DP1, respectively. During the fragmentation process of dolutegravir and its degradation products DP1 to DP3 a formal addition of oxygen resulting in the respective carboxylic acid fragments was detected. This could be evidenced based on high resolution masses of the fragments as well as the comparison of the MS/MS spectra of the fragments with the spectra of the carboxylic acids DP4 and DP5., Competing Interests: Declaration of Competing Interest The authors have declared no conflict of interest., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The metabolic syndrome (MetS) is a constellation of cardiovascular and metabolic symptoms involving insulin resistance, steatohepatitis, obesity, hypertension, and heart disease, and patients suffering from MetS often require polypharmaceutical treatment. PPARγ agonists are highly effective oral antidiabetics with great potential in MetS, which promote adipocyte browning and insulin sensitization. However, the application of PPARγ agonists in clinics is restricted by potential cardiovascular adverse events. We have previously demonstrated that the racemic dual sEH/PPARγ modulator RB394 ( 3 ) simultaneously improves all risk factors of MetS in vivo. In this study, we identify and characterize the eutomer of 3 . We provide structural rationale for molecular recognition of the eutomer. Furthermore, we could show that the dual sEH/PPARγ modulator is able to promote adipocyte browning and simultaneously exhibits cardioprotective activity which underlines its exciting potential in treatment of MetS.

During a screening of cyclodextrins (CDs) as chiral selectors for the separation of daclatasvir (DCV) and its enantiomer by capillary electrophoresis (CE), an unusual phenomenon for CDs was observed, that is two peaks with a plateau in between using γ-CD as chiral selector. The same result was encountered when enantiopure DCV was injected or when analyzing a sample containing enantiopure DCV and γ-CD in a CD-free background electrolyte. Peak coalescence was observed at 45°C and at a pH above 3.5. Two peaks with a plateau were also observed for DCV stereoisomers as well as a structural analog. However, only a single peak was detected if one or both amino acid moieties of DCV were lacking. Nuclear magnetic resonance (NMR) experiments including Nuclear Overhauser effect-based methods showed that in solution DCV adopted a folded conformation in which the isopropyl side chain of the valine residues pointed toward the aromatic rings of DCV. Moreover, NMR unequivocally demonstrated the simultaneous formation of DCV-γ-CD inclusion complexes with 1:1 and 2:1 stoichiometry, which was corroborated by mass spectrometry. In both complexes, DCV also adopted a folded structure. The RSSR-diastereomer of DCV as well as an analog lacking one of the amino acid moieties also formed 1:1 and 2:1 complexes with γ-CD although a plateau was only observed in the case of the RSSR-diastereomer. As shown by CE-MS, both DCV-γ-CD complexes surprisingly comigrated as the first peak, while the second migrating peak represents non-complexed DCV., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier B.V.)

Dexmedetomidine is a selective α 2 -adrenergic agonist used for patient sedation, while its enantiomer levomedetomidine has no sedative effects. As CE has been shown to be a powerful technique for enantiomer analysis, the aim of the study was the quality by design-based development of a CE-based limit test for the enantiomeric impurity levomedetomidine. The analytical target profile was defined that the method should be able to determine levomedetomidine with acceptable precision and accuracy at the 0.1% level. From initial scouting experiments, sulfated β-cyclodextrin was selected as chiral selector. The critical process parameters were identified in a fractional factorial resolution V+ design, while a central composite face centered design and Monte Carlo simulations were used for defining the design space of the method. The selected working conditions were a 21.3/31.5 cm, 50 μm id fused-silica capillary, a 50 mM sodium phosphate buffer, pH 6.5, containing 40 mg/mL sulfated β-cyclodextrin, a capillary temperature of 17°C and an applied voltage of 10 kV. Validation according to the ICH guideline Q2(R1) demonstrated repeatability and intermediate precision of content and migration time between 9.3 and 4.2% with accuracy in the range of 92.0 and 98.9%., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The migration order of the enantiomers of medetomidine in the presence of cyclodextrins studied by capillary electrophoresis in phosphate buffer, pH 2.5, depended on the cavity size and the substitution pattern of the cyclodextrins. Opposite migration order was observed in the presence of β-cyclodextrin (β-CD) and γ-cyclodextrin (γ-CD) as well as randomly sulfated β-CD (S-β-CD) and heptakis(6-O-sulfo)-β-CD (HS-β-CD). This could be rationalized by the fact that dexmedetomidine formed more stable complexes with β-CD and S-β-CD, while levomedetomidine interacted stronger with γ-CD and HS-β-CD. The structure of the complexes was derived from rotating frame nuclear Overhauser (ROESY) experiments for β-CD, γ-CD and HS-β-CD. In the case of the native CDs, the phenyl ring of medetomidine entered the cavity through the wider secondary rim of the CDs, whereas the protonated imidazole ring was positioned inside the CD cavity interacting with the sulfate groups of HS-β-CD. Furthermore, molecular dynamics calculations also suggested opposite affinities of the medetomidine enantiomers toward β-CD and γ-CD., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Dextromethorphan is a centrally acting antitussive drug, while its enantiomer levomethorphan is an illicit drug with opioid analgesic effects. As capillary electrophoresis has been proven as an ideal technique for enantiomer analysis, the present study was conducted in order to develop a capillary electrophoresis-based limit test for levomethorphan. The analytical target profile was defined as a method that should be able to determine levomethorphan with acceptable precision and accuracy at the 0.1 % level. From initial scouting experiments, a dual selector system consisting of sulfated β-cyclodextrin and methyl-α-cyclodextrin was identified. The critical process parameters were evaluated in a fractional factorial resolution IV design followed by a central composite face-centered design and Monte Carlo simulations for defining the design space of the method. The selected working conditions consisted of a 30/40.2 cm, 50 μm id fused-silica capillary, 30 mM sodium phosphate buffer, pH 6.5, 16 mg/mL sulfated β-cyclodextrin, and 14 mg/mL methyl-α-cyclodextrin at 20°C and 20 kV. The method was validated according to ICH guideline Q2(R1) and applied to the analysis of a capsule formulation. Furthermore, the apparent binding constants between the enantiomers and the cyclodextrins as well as complex mobilities were determined to understand the migration behavior of the analytes., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)