Search

YAG:Ce/YAG:Cr/YAG:Pr composite phosphor ceramics with barcode structure were prepared by tape casting combined with the solid‐state reaction method. This structure provides a convenient and effective method for regulating the optical parameters such as luminous efficacy (LE), color rendering, and correlated color temperature (CCT) of white light‐emitting diodes/laser diodes (LEDs/LDs). For the sample with a thickness ratio of 6:6:6 for YAG:Ce, YAG:Cr, and YAG:Pr, the in‐line transmittance reaches 60% at 800 nm, and it shows a good optical performance with the LE of 106 lm/W, the color gamut (Rg) of 77, the color fidelity index (Rf) of 86, and the CCT of 7642 K. The electroluminescence spectra and color coordinates can be adjusted by changing the ratio of each component in the composite ceramic and the thickness of the ceramic because the tape casting method allows precise control of the thickness of each ceramic layer. The high tunability provides more freedom in the performance design of composite phosphor ceramics and makes them the most promising candidate for high brightness white LEDs/LDs. [ABSTRACT FROM AUTHOR]

In this work, a series of Al2O3–Ce:YAG phosphor powders were synthesized by regulating the excess Al3+ of (Y,Ce)3Al5O12 via coprecipitation method for the first time, where Al3+, Ce3+, and Y3+ elements were uniformly distributed. With the increase of Al3+ content, the morphology of the powders changed from wormlike shapes to flaky shapes, and Y3Al5O12 phases had a tendency to convert to YAlO3 phases. The x wt.% Al2O3–(Y0.999Ce0.001)3Al5O12 (x = 20, 30, 40, 50, 60, and 70) composite phosphor ceramics (CPCs) were obtained by vacuum sintering (1775°C × 10 h), where Al2O3 and Ce:YAG phases were also well‐distributed. When the Al2O3 content was 30–40 wt.%, the average grain size of Al2O3 was close to that of Ce:YAG. A solid‐state laser lighting device was constructed by a 450 nm laser source and CPCs in a reflection mode. By adjusting the laser power, the correlated color temperature (CCT) values of white laser diodes (LDs) were achieved close to the standard white light of 6500 K. Impressively, the white LDs equipped with the 40 wt.% Al2O3‐containing CPCs showed the optimum CCT of 6498 K (color coordinates: 0.31 and 0.38), as well as a high luminous flux of 1169 lm and efficiency of 166 lm/W at the LD power of 7.05 W. This work has provided a potential idea to optimize the composition uniformity of Al2O3–Ce:YAG CPCs as also to explore their excellent performance in the application of white laser lighting. [ABSTRACT FROM AUTHOR]