Search

We propose a new method for labeling the eigenstates of qubit-cavity systems based on the continuity of the qubit occupancy. The labeled eigenstates give a rough estimation of the evolution of a quantum state under cavity driving. The photon-number dependence of the resonant cavity frequency can be estimated from the labeled eigenenergies, and resonances to higher excited qubit states are visible in the dependence. Our proposed method can be applied to a broader parameter region compared to an existing method. With the proposed method, we investigate the offset charge dependence of the resonances to higher excited states that can induce leakage effects from the computational basis. The results imply that the leakage can occur with only around ten photons., Comment: 6 pages, 4 figures

Quantum transduction between microwave and optical photons plays a key role in quantum communication among remote qubits. Although the quantum transduction schemes generating communication photons have been successfully demonstrated by using optomechanical interfaces, the low conversion efficiency remains an obstacle to the implementation of a quantum network consisting of multiple qubits. Here, we present an efficient quantum transduction scheme using a one-dimensional diamond optomechanical crystal cavity tuned at a color-center emission without optomechanical coupling. The optomechanical crystal cavity incorporates a thin aluminum nitride (AlN) pad piezoelectric coupler near the concentrator cavity region, while retaining ultrasmall mechanical and optical mode volumes of about 1.5 \times 10^{-4} and ~0.2({\lambda}/n)^3, respectively. The energy level of a coherent color-center electron is manipulated by a strong mechanical-mode-color-center electron-coupling rate up to 16.4MHz. In our system, we theoretically predict that the population-conversion efficiency from a single microwave photon into an optical photon can reach 15% combined with current technologies. The coherent conversion efficiency is over 10% with a reasonably pure decay time of T^2_{*} > 10 ns. Our results imply that an atomic color center strongly coupled to the optomechanical crystal cavity will offer a highly efficient quantum transduction platform., Comment: 24 pages, 7 figures

We develop an efficient numerical approach for simulating the high-power dispersive readout in circuit quantum electrodynamics. In the numerical simulations of the high-power readout, a large-amplitude coherent state induced in a cavity is an obstacle because many Fock states are required to describe such a state. We remove the large-amplitude coherent state from the numerical simulations by simulating the dynamics in a frame where the amplitude of the coherent state is almost absent. Using the developed method, we numerically simulate the high-power dispersive readout of the two-level system and the transmon. Our proposed method succeeds in producing reasonable behaviors of the high-power dispersive readout which can be deduced from the photon-number dependence of the cavity frequency: The high-power dispersive readout works in the two-level-system case while it does not work in the transmon case., Comment: 11 pages, 10 figures, accepted version

The number of superconducting qubits contained in a single quantum processor is increasing steadily. However, to realize a truly useful quantum computer, it is inevitable to increase the number of qubits much further by distributing quantum information among distant processors using flying qubits. Here, we demonstrate a key element towards this goal, namely, a SWAP gate between the superconducting-atom and microwave-photon qubits. The working principle of this gate is the single-photon Raman interaction, which results from strong interference in one-dimensional optical systems and enables a high gate fidelity insensitively to the pulse shape of the photon qubit, by simply bouncing the photon qubit at a cavity attached to the atom qubit. We confirm the bidirectional quantum state transfer between the atom and photon qubits. The averaged fidelity of the photon-to-atom (atom-to-photon) state transfer reaches 0.829 (0.801), limited mainly by the energy relaxation time of the atom qubit. The present atom-photon gate, equipped with an in situ tunability of the gate type, would enable various applications in distributed quantum computation using superconducting qubits and microwave photons., Comment: 14 pages, 5 figures

We investigate the stimulated emission of superradiant atoms coupled to a waveguide induced by a coherent-state photon pulse. We provide an analytical result when a short $\pi$ pulse is incident, which shows that the atoms emit photons coherently into the output pulse, which remains a coherent state in the short pulse limit. An incident pulse is amplified in phase-preserving manner, where noise is added almost entirely in the phase direction in phase space. This property improves the ratio of intensity signal to noise after the amplification for sufficiently short pulses. This is a unique feature different from general phase-preserving linear amplifiers, where the signal-to-noise ratio deteriorates in the amplification process. We also discuss the dependence of the photon-emission probability on pulse parameters, such as the pulse area and the duration., Comment: Main text: 6 pages, 4 figures, Supplemental materials: 7 pages, 1 figure

We consider a typical circuit QED setup where an artificial atom encodes a qubit and is dispersively coupled to a measurement resonator that in turn is coupled to a transmission line. We show theoretically that by placing another artificial atom in this transmission line to act as a filter, the Purcell decay of the qubit into the transmission line is suppressed. When strong control fields are applied in the transmission line, the filter is saturated and effectively switched off. Such a Purcell filtering capability permits both the control and measurement of the qubit using the single transmission line, while maintaining the long coherence time of the qubit in the absence of the control pulses. We show that high fidelity Pauli $\sigma_x$ gates on the qubit can be realized using simple pulse shapes. For devices that already use one transmission line both for control and measurement of the qubit, our work provides a way to completely filter out the qubit frequency without removing the possibility of controlling the system. Further, combining the proposed filter with frequency multiplexing potentially enables both control and measurement of several qubits using a single Purcell-filtered transmission line. This will enhance the scalability of superconducting quantum processors by decreasing the number of the required transmission lines., Comment: 21 pages, 9 figures

In ultra- and deep-strong cavity quantum electrodynamics (QED) systems, many intriguing phenomena that do not conserve the excitation number are expected to occur. In this study, we theoretically analyze the optical response of an ultrastrong cavity-QED system in which an atom is coupled to the fundamental and third harmonic modes of a cavity, and report the possibility of deterministic three-photon down-conversion of itinerant photons upon reflection at the cavity. In the conventional parametric down-conversion, a strong input field is needed because of the smallness of the transition matrix elements of the higher order processes. However, if we use an atom-cavity system in an unprecedentedly strong-coupling region, even a weak field in the linear-response regime is sufficient to cause this rare event involving the fourth order transitions., Comment: 13 pages, 9 figures

We investigate optical response of a linear waveguide quantum electrodynamics (QED) system, namely, an optical cavity coupled to a waveguide. Our analysis is based on exact diagonalization of the overall Hamiltonian and is therefore rigorous even in the ultrastrong coupling regime of waveguide QED. Owing to the counter-rotating terms in the cavity-waveguide coupling, the motion of cavity amplitude in the phase space is elliptical in general. Such elliptical motion becomes remarkable in the ultrastrong coupling regime due to the large Lamb shift comparable to the bare cavity frequency. We also reveal that such elliptical motion does not propagate into the output field and present an analytic form of the reflection coefficient that is asymmetric with respect to the resonance frequency., Comment: 13 pages, 8 figures

A Josephson quantum filter (JQF) protects a data qubit (DQ) from the radiative decay into transmission lines in superconducting quantum computing architectures. A transmon, which is a weakly nonlinear harmonic oscillator rather than a pure two-level system, can play a role of a JQF or a DQ. However, in the previous study, a JQF and a DQ were modeled as two-level systems neglecting the effects of higher levels. We theoretically examine the effects of the higher levels of the JQF and the DQ on the control of the DQ. It is shown that the higher levels of the DQ cause the shift of the resonance frequency and the decrease of the maximum population of the first excited state of the DQ in the controls with a continuous wave (cw) field and a pulsed field, while the higher levels of the JQF do not. Moreover, we present optimal parameters of the pulsed field, which maximize the control efficiency., Comment: We have noticed that we could not download the first version of the PDF for some reason, We upload the same files here

We investigate theoretically how the ground state of a qubit-resonator system in the deep-strong coupling (DSC) regime is affected by the coupling to an environment. We employ as a variational ansatz for the ground state of the qubit-resonator-environment system a superposition of coherent states displaced in qubit-state-dependent directions. We show that the reduced density matrix of the qubit-resonator system strongly depends on how the system is coupled to the environment, i.e., capacitive or inductive, because of the broken rotational symmetry of the eigenstates of the DSC system in the resonator phase space. When the resonator couples to the qubit and the environment in different ways (for instance, one is inductive and the other is capacitive), the system is almost unaffected by the resonator-waveguide coupling. In contrast, when the two couplings are of the same type (for instance, both are inductive), by increasing the resonator-waveguide coupling strength, the average number of virtual photons increases and the quantum superposition realized in the qubit-resonator entangled ground state is partially degraded. Since the superposition becomes more fragile with increasing the qubit-resonator coupling, there exists an optimal coupling strength to maximize the nonclassicality of the qubit-resonator system., Comment: 24 pages, 11 figures

The rapid development in designs and fabrication techniques of superconducting qubits has helped making coherence times of qubits longer. In the near future, however, the radiative decay of a qubit into its control line will be a fundamental limitation, imposing a trade-off between fast control and long lifetime of the qubit. In this work, we successfully break this trade-off by strongly coupling another superconducting qubit along the control line. This second qubit, which we call a Josephson quantum filter (JQF), prevents the qubit from emitting microwave photons and thus suppresses its relaxation, while faithfully transmitting large-amplitude control microwave pulses due to the saturation of the quantum filter, enabling fast qubit control. We observe an improvement of the qubit relaxation time without a reduction of the Rabi frequency. This device could potentially help in the realization of a large-scale superconducting quantum information processor in terms of the heating of the qubit environments and the crosstalk between qubits., Comment: 22 pages, 13 figures, 1 table

Superconducting circuits offer a scalable platform for the construction of large-scale quantum networks where information can be encoded in multiple temporal modes of propagating microwaves. Characterization of such microwave signals with a method extendable to an arbitrary number of temporal modes with a single detector and demonstration of their phase-robust nature are of great interest. Here we show the on-demand generation and Wigner tomography of a microwave time-bin qubit with superconducting circuit quantum electrodynamics architecture. We perform the tomography with a single heterodyne detector by dynamically changing the measurement quadrature with a phase-sensitive amplifier independently for the two temporal modes. By generating and measuring the qubits with hardware lacking a shared phase reference, we demonstrate conservation of phase information in each time-bin qubit generated.

The coupling between a superconducting qubit and a control line inevitably results in radiative decay of the qubit into the line. We propose a Josephson quantum filter (JQF), which protects the data qubit (DQ) from radiative decay through the control line without reducing the gate speed on DQ. JQF consists of a qubit strongly coupled to the control line to DQ, and its working principle is a subradiance effect characteristic to waveguide quantum electrodynamics setups. JQF is a passive circuit element and is therefore suitable for integration in a scalable superconducting qubit system., Comment: 13 pages, 7 figures

We study nonreciprocal microwave transmission based on the Gebhard-Ruckenstein hopping. We consider a superconducting device that consists of microwave resonators and a coupler. The Gebhard-Ruckenstein hopping between the resonators gives rise to a linear energy dispersion which manifests chiral propagation of microwaves in the device. This device functions as an on-chip circulator with a wide bandwidth when transmission lines are attached.

We report on experimentally measured light shifts of superconducting flux qubits deep-strongly coupled to LC oscillators, where the coupling constants are comparable to the qubit and oscillator resonance frequencies. By using two-tone spectroscopy, the energies of the six lowest levels of each circuit are determined. We find huge Lamb shifts that exceed 90% of the bare qubit frequencies and inversions of the qubits' ground and excited states when there are a finite number of photons in the oscillator. Our experimental results agree with theoretical predictions based on the quantum Rabi model., Comment: 19 pages, 7 figures, and 2 tables. Supplemental Material is included

Single photon detection is a requisite technique in quantum-optics experiments in both the optical and the microwave domains. However, the energy of microwave quanta are four to five orders of magnitude less than their optical counterpart, making the efficient detection of single microwave photons extremely challenging. Here, we demonstrate the detection of a single microwave photon propagating through a waveguide. The detector is implemented with an "impedance-matched" artificial $\Lambda$ system comprising the dressed states of a driven superconducting qubit coupled to a microwave resonator. We attain a single-photon detection efficiency of $0.66 \pm 0.06$ with a reset time of $\sim 400$~ns. This detector can be exploited for various applications in quantum sensing, quantum communication and quantum information processing., Comment: 5 pages (4 figures) + 4 pages (5 figures)

We propose a scheme for continuous detection of itinerant microwave photons in circuit quantum electrodynamics. In the proposed device, a superconducting qubit is coupled dispersively to two resonators: one is used to form an impedance-matched $\Lambda$ system that deterministically captures incoming photons, and the other is used for continuous monitoring of the event. The present scheme enables efficient photon detection: for realistic system parameters, the detection efficiency reaches 0.9 with a bandwidth of about ten megahertz., Comment: 7 pages, 5 figures

By properly driving a qubit-resonator system in the strong dispersive regime, we implement an "impedance-matched" $\Lambda$ system in the dressed states, where a resonant single photon deterministically induces a Raman transition and excites the qubit. Combining this effect and a fast dispersive readout of the qubit, we realize a detector of itinerant microwave photons. We theoretically analyze the single-photon response of the $\Lambda$ system and evaluate its performance as a detector. We achieve a high detection efficiency close to unity without relying on precise temporal control of the input pulse shape and under a conservative estimate of the system parameters. The detector can also be reset quickly by applying microwave pulses, which allows a short dead time and a high repetition rate., Comment: 11 pages, 9 figures

We consider the effect of dephasing on a quantum dot which injects single electrons on a chiral edge channel of the quantum Hall effect. Dephasing is described by the coupling of the dot to a bosonic bath which represents the electromagnetic environment. Using the input-output formalism of quantum optics, we derive the density matrix of the edge degrees of freedom. Results are illustrated by computing the zero frequency current-current correlations when two such single electron emitters achieve a collision at the location of a quantum point contact, in the same spirit as the Hong Ou Mandel experiment of quantum optics. Such correlations are directly linked to the quantum mechanical purity. We show that as observed in a recent experiment, the effect of dephasing leads to a non-vanishing of the Hong Ou Mandel dip when the time delay between the two electron wave packets is zero. Generalizations to time filtered wave packets as well as to asymmetric, detuned injection between opposite edges are obtained., Comment: 8 pages, 4 figures

In one-dimensional optical setups, light-matter interaction is drastically enhanced by the interference between the incident and scattered fields. Particularly, in the impedance-matched \Lambda-type three-level systems, a single photon deterministically induces the Raman transition and switches the electronic state of the system. Here we show that such a \Lambda system can be implemented by using dressed states of a driven superconducting qubit and a resonator. The input microwave photons are perfectly absorbed and are down-converted into other frequency modes in the same waveguide. The proposed setup is applicable to single-photon detection in the microwave domain., Comment: 6 pages, 5 figures

In distributed quantum information processing, flying photons entangle matter qubits confined in cavities. However, when a matter qubit is homogeneously broadened, the strong-coupling regime of cavity QED is typically required, which is hard to realize in actual experimental setups. Here, we show that a high-fidelity entanglement operation is possible even in the weak-coupling regime in which dampings (dephasing, spontaneous emission, and cavity leakage) overwhelm the coherent coupling between a qubit and the cavity. Our proposal enables distributed quantum information processing to be performed using much less demanding technology than previously.

We investigate the properties of a single photon generated by a solid-state emitter subject to strong pure dephasing. We employ a model in which all the elements of the system, including the propagating fields, are treated quantum mechanically. We analytically derive the density matrix of the emitted photon, which contains full information about the photon, such as its pulse profile, power spectrum, and purity. We visualize these analytical results using realistic parameters and reveal the conditions for maximizing the purity of generated photons., Comment: 25pages(one column), 10 figures

We theoretically present a method to realize a deterministic photon-photon (SWAP)^{1/2} gate using a three-level lambda system interacting with single photons in reflection geometry. The lambda system is used completely passively as a temporary memory for a photonic qubit; the initial state of the lambda system may be arbitrary, and active control by auxiliary fields is unnecessary throughout the gate operations. These distinct merits make this entangling gate suitable for deterministic and scalable quantum computation., Comment: 7 pages, 4 figures

We have investigated the optical response of superradiant atoms, which undergoes three different damping mechanisms: radiative dissipation ($\gamma_r$), dephasing ($\gamma_d$), and nonradiative dissipation ($\gamma_n$). Whereas the roles of $\gamma_d$ and $\gamma_n$ are equivalent in the linear susceptibility, the third-order nonlinear susceptibility drastically depends on the ratio of $\gamma_d$ and $\gamma_n$: When $\gamma_d \ll \gamma_n$, the third-order susceptibility is essentially that of a single atom. Contrarily, in the opposite case of $\gamma_d \gg \gamma_n$, the third-order susceptibility suffers the size-enhancement effect and becomes proportional to the system size., Comment: 5pages, 2figures

We have investigated the two-photon nonlinearity at general cavity QED systems, which covers both weak and strong coupling regimes and includes radiative loss from the atom. The one- and two-photon propagators are obtained in analytic forms. By surveying both coupling regimes, we have revealed the conditions on the photonic wavepacket for yielding large nonlinearity depending on the cavity Q-value. We have also discussed the effect of radiative loss on the nonlinearity., Comment: 8 pages, 5 figures

The quantum Zeno effect -- suppression of decay by frequent measurements -- was believed to occur only when the response of the detector is so quick that the initial tiny deviation from the exponential decay law is detectable. However, we show that it can occur even for exactly exponentially decaying systems, for which this condition is never satisfied, by considering a realistic case where the detector has a finite energy band of detection. The conventional theories correspond to the limit of an infinite bandwidth. This implies that the Zeno effect occurs more widely than expected so far., Comment: 4 pages, 3 figures

We study the quantum Zeno effect and the anti-Zeno effect in the case of `indirect' measurements, where a measuring apparatus does not act directly on an unstable system, for a realistic model with finite errors in the measurement. A general and simple formula for the decay rate of the unstable system under measurement is derived. In the case of a Lorentzian form factor, we calculate the full time evolutions of the decay rate, the response of the measuring apparatus, and the probability of errors in the measurement. It is shown that not only the response time but also the detection efficiency plays a crucial role. We present the prescription for observing the quantum Zeno and anti-Zeno effects, as well as the prescriptions for avoiding or calibrating these effects in general experiments., Comment: 4 pages, 3 figures

Using microscopic models in which both photons and excitons are treated as microscopic degrees of freedom, we discuss polaritons of two cases: One is the case when excitonic parameters are time dependent. The time dependence causes creation of polaritons from a "false vacuum." % We present the creation spectra of both % the lower- and upper-branch polaritons. It is shown that both the creation sepctra and the creation efficiency are much different from the results of the previous studies. The other is polaritons in absorptive and inhomogeneous cavities. A polariton in such a system cannot be viewed as a back and forth oscillation between a photon state and an exciton state., Comment: 8 pages, 3 figures Proc. 6th NEC Symposium on Fundamental Approaches to New Material Phases (Karuizawa, Japan 1996)