Search

Kayla Kopczynski,1 Beau D Meyer2 1Adams School of Dentistry, University of North Carolina-Chapel Hill, Chapel Hill, NC, USA; 2Division of Pediatric Dentistry, College of Dentistry, Ohio State University, Columbus, OH, USACorrespondence: Beau D MeyerThe Ohio State University, College of Dentistry, Division of Pediatric Dentistry, Columbus, OH, USAEmail meyer.781@osu.eduPurpose: The primary objective of this study was to compare relationships between child, parent, and clinical factors with patient-level treatment decisions for early childhood caries. A secondary objective was to describe children that received silver diamine fluoride (SDF) as interim versus long-term treatment.Patients and Methods: Parents of 2– 6-year-old children seeking care at a multi-center pediatric dentistry private practice were enrolled in this cross-sectional study. Demographic data and dental anxiety data according to the Modified Corah’s Dental Anxiety Scale were collected via questionnaire. A dental visit behavior rating and decayed, missing, and filled tooth (dmft) index were recorded from the child’s dental record. The primary outcome was treatment decision categorized into three groups: (1) treatment with SDF (n=25), (2) conventional restorative treatment under local anesthesia (n=32), and (3) restorative treatment under general anesthesia (n=33). Analyses included descriptive statistics, bivariate analysis, and ordered logistic regression.Results: Child age, parent education level, family income, dental insurance status, dental visit behavior rating, and dmft were significantly different across treatment groups in bivariate comparisons. However, when included in multivariable, ordered logistic regression, child dental anxiety was the only significant covariate associated with treatment decisions (Odds Ratio=5.01, 95% confidence interval: 1.51 to 16.63). In secondary analysis, two distinct subgroups were identified within the SDF group: one as long-term treatment (n=9) and one as interim treatment prior to general anesthesia (n=16). The long-term group was younger (mean=3.2 versus 3.7), had lower dmft (mean=4 versus 11.1), and had lower frequency of very high dental anxiety (0% versus 15%).Conclusion: The present study identified child dental anxiety as the primary factor associated with treatment decisions at this private practice. The characterization of two subgroups of children treated with SDF has meaningful implications for studies evaluating the economic and public health impacts of SDF.Keywords: dental caries, early childhood caries, preventive dentistry

In the paper, the contents of calcium (Ca), magnesium (Mg), zinc (Zn), copper (Cu), iron (Fe), manganese (Mn), chromium (Cr), lead (Pb), cadmium (Cd), aluminium (Al), and nickel (Ni) were determined in the meat of roe deers, wild boars, and hares coming from central region of Poland. Measurements were carried out using atomic absorption spectrometry. The ranges of median values found for the concentration of elements were as follows: 89 - 121 (Ca), 235 - 241 (Mg), 19.2 - 28.6 (Zn), 0.93 - 2.07 (Cu), 26.3 - 39.1 (Fe), 0.10 - 0.38 (Mn), 0.04 - 0.31 (Cr), 0.07 - 0.48 (Pb), 0.004 - 0.010 (Cd), 0.31 - 1.26 (Al), and 0.05 - 0.13 (Ni) ìg/g, respectively. We stated that the concentrations of Ca, Mg, Cu, Fe, and Mn were comparable to their amounts in meat of farm animals. The smallest amounts of hazardous elements, except for Al, were determined in meat of hares, and the highest ones in roe deer meat. Moreover, a large variability in Cr, Pb, and Ni content was found. Generally, there were no significant correlations between the concentration of elements in the meat of wild animals and their age and weight, but some statistically significant and strong correlations between concentrations of elements were stated. Moreover, significant positive correlations were found to exist for the content of Fe and Mn in muscle tissue and liver of hares. [ABSTRACT FROM AUTHOR]

The paper presents the investigation results of laser generation around 1.5 μm at different wavelengths. The shifts of the wavelength were achieved by the change of pump power, transmission of an output mirror, and length of an active medium. Mathematical analysis and explanation of this phenomenon was curried out on the basis of the change in relation between the gain and loss lines. [ABSTRACT FROM AUTHOR]

Abstract: The using of sonochemically prepared components for growth of SbI3·3S8 single crystals from the vapor phase is presented for the first time. The good optical quality of the obtained crystals is important because this material is valuable for optoelectronics due to its non-linear optical properties. The products were characterized by using techniques such as X-ray crystallography, powder X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis, high-resolution transmission electron microscopy, selected area electron diffraction, optical diffuse reflection spectroscopy and optical transmittance spectroscopy. The direct and indirect forbidden energy gaps of SbI3·3S8 illuminated with plane polarized light with electric field parallel and perpendicular to the c-axis of the crystal have been determined. The second harmonic generation of light in the grown crystals was observed. [Copyright &y& Elsevier]

This publication presents the effect of hypochlorous acid dry mist as a disinfectant on selected bacteria, viruses, spores, and fungi as well as on portable Microlife OXY 300 finger pulse oximeters and electronic systems of Raspberry Pi Zero microcomputers. The impact of hypochlorous acid on microbiological agents was assessed at concentrations of 300, 500, and 2000 ppm of HClO according to PN-EN 17272 (Variant I). Studies of the impact of hypochlorous acid fog on electronic components were carried out in an aerosol chamber at concentrations of 500 ppm and 2000 ppm according to two models consisting of 30 (Variant II) and 90 fogging cycles (Variant III). Each cycle included the process of generating a dry mist of hypochlorous acid (25 mL/m 3 ), decontamination of the test elements, as well as cleaning the chamber of the disinfectant agent. The exposure of the materials examined on hypochlorous acid dry mist in all variants resulted in a decrease in the number of viruses, bacteria, spores, and fungi tested. In addition, the research showed that in the variants of hypochlorous acid fogging cycles analyzed, no changes in performance parameters and no penetration of dry fog of hypochlorous acid into the interior of the tested medical devices and electronic systems were observed.

The article presents the history of the development and the current state of the apparatus for the detection of interferents and biological warfare simulants in the air with the laser-induced fluorescence (LIF) method. The LIF method is the most sensitive spectroscopic method and also enables the measurement of single particles of biological aerosols and their concentration in the air. The overview covers both the on-site measuring instruments and remote methods. The spectral characteristics of the biological agents, steady-state spectra, excitation-emission matrices, and their fluorescence lifetimes are presented. In addition to the literature, we also present our own detection systems for military applications.

In the past twenty years, the basic investigation of innovative Non-Linear Optical (NLO) crystals has received significant attention, which has built the crucial heritage for the use of NLO materials. Fundamental research is essential given the scarcity of materials for NLO compounds, especially in the deep ultraviolet (DUV) and middle- and far-infrared (MFIR) regions. In the present work, we synthesized high-quality MFIR SbI 3 ·3S 8 NLO crystals having a length in the range of 1-5 mm through rapid facile liquid phase ultrasonic reaction followed by the assistance of instantaneous natural evaporation phenomenon of the solvent at room temperature. X-ray diffraction (XRD) results ratify the hexagonal R3m structure of SbI 3 ·3S 8 crystal, and energy-dispersive X-ray spectroscopy (EDX) demonstrates that the elemental composition of SbI 3 ·3S 8 crystal is similar to that of its theoretical composition. The direct and indirect forbidden energy gaps of SbI 3 ·3S 8 were measured from the optical transmittance spectra and they were shown to be 2.893 eV and 1.986 eV, respectively. The green sparkling signal has been observed from the crystal during the second harmonic generation (SHG) experiment. Therefore, as inorganic adducts are often explored as NLO crystals, this work on the MFIR SbI 3 ·3S 8 NLO crystal can bring about additional investigations on this hot topic in the near future.

In this article, we present a versatile gas detector that can operate on an unmanned aerial vehicle (UAV) or unmanned ground vehicle (UGV). The device has six electrochemical modules, which can be selected to measure specific gases, according to the mission requirements. The gas intake is realized by a miniaturized vacuum pump, which provides immediate gas distribution to the sensors and improves a fast response. The measurement data are sent wirelessly to the operator's computer, which continuously stores results and presents them in real time. The 2 m tubing allows measurements to be taken in places that are not directly accessible to the UGV or the UAV. While UAVs significantly enhanced the versatility of sensing applications, point gas detection is challenging due to the downwash effect and gas dilution produced by the rotors. In our work, we demonstrated the method of downwash effect reduction at aerial point gas measurements by applying a long-distance probe, which was kept between the UAV and the examined object. Moreover, we developed a safety connection protecting the UAV and sensor in case of accidental jamming of the tubing inside the examined cavity. The methods presented provide an effective gas metering strategy using UAVs.

In this work, the technique of hot embossing has been applied for the bonding of alumina-phosphate (PAL) glass with cobalt-doped magnesium aluminate (MALO) crystals. The application of the hot embossing technique for bonding of PAL/MALO is a competitive method, as compared to the existing thermobonding techniques. The obtained PAL/MALO interfaces show high quality, similar to what is currently achievable with other, more expensive traditional methods. The interfaces of the bonded samples have been successfully tested for strength and damage thresholds. The damage threshold is estimated to be around 4.5-7.9 k W / c m 2 . Therefore, microlasers can be developed based on the obtained components.

This study shows the results of air monitoring in high- and low-occupancy rooms using two combinations of sensors, AeroTrak8220(TSI)/OPC-N3 (AlphaSense, Great Notley, UK) and OPC-N3/PMS5003 (Plantower, Beijing, China), respectively. The tests were conducted in a flat in Warsaw during the restrictions imposed due to the COVID-19 lockdown. The results showed that OPC-N3 underestimates the PN (particle number concentration) by about 2-3 times compared to the AeroTrak8220. Subsequently, the OPC-N3 was compared with another low-cost sensor, the PMS5003. Both devices showed similar efficiency in PN estimation, whereas PM (particulate matter) concentration estimation differed significantly. Moreover, the relationship among the PM 1 -PM 2.5 -PM 10 readings obtained with the PMS5003 appeared improbably linear regarding the natural indoor conditions. The correlation of PM concentrations obtained with the PMS5003 suggests an oversimplified calculation method of PM. The studies also demonstrated that PM 1 , PM 2.5 , and PM 10 concentrations in the high- to low-occupancy rooms were about 3, 2, and 1.5 times, respectively. On the other hand, the use of an air purifier considerably reduced the PM concentrations to similar levels in both rooms. All the sensors showed that frying and toast-making were the major sources of particulate matter, about 10 times higher compared to average levels. Considerably lower particle levels were measured in the low-occupancy room.

Inorganic hollow spheres find a growing number of applications in many fields, including catalysis and solar cells. Hence, a simple fabrication method with a low number of simple steps is desired, which would allow for good control over the structural features and physicochemical properties of titania hollow spheres modified with noble metal nanoparticles. A simple method employing sol-gel coating of nanoparticles with titania followed by controlled silver diffusion was developed and applied for the synthesis of Ag-modified hollow TiO 2 spheres. The morphology of the synthesized structures and their chemical composition was investigated using SEM and X-ray photoelectron spectroscopy, respectively. The optical properties of the synthesized structures were characterized using UV-vis spectroscopy. Ag-TiO 2 hollow nanostructures with different optical properties were prepared simply by a change of the annealing time in the last fabrication step. The synthesized nanostructures exhibit a broadband optical absorption in the UV-vis range., (Copyright © 2020, Bartosewicz et al.; licensee Beilstein-Institut.)