Search

89Zr is an emerging radionuclide with promising application in nuclear medicine for the non-invasive diagnosis of various cancers with PET imaging. This paper would discuss optimization efforts in the production of 89Zr carried out at Accelerator Radioisotope Development Team, Korea Atomic Energy Research Institute. Optimized conditions reveal high production yields of 89Zr ~ 37 ± 1.4 MBq/µA using 89Y(p,n)89Zr, ~ 12.7 MeV of proton, and 35 µA using yttrium coin target with indigenously constructed 30 MeV Cyclotron (RFT-30). Besides, the production optimization, quality control, and biological behavior of [89Zr]Zr-oxalate, chloride and, DFO demonstrated promising results. [ABSTRACT FROM AUTHOR]

A durable and ready to use 68Ge-68Ga generator column material is required for its routine use in radiopharmaceutical procedures. The present work comprises preliminary studies for development and evaluation of chitosan-TiO 2 based microsphere (C-TOM) composite towards its competence as a column material. The batch uptake studies showed higher distribution coefficients for 68Ge vis-à-vis 68Ga in the complete concentration range of HCl examined (0.01–1 mol.L−1). Furthermore, C-TOM showed enduring physical and chemical stability in 0.01 mol.L−1 HCl with persistent 68Ga elution profiles (>95%) and negligible 68Ge breakthrough (2 × 10−4%) for the preliminary evaluation period of ∼2 months. Overall, the studies indicated that, 68Ga with high radionuclidic purity (≥99.99%) can be eluted routinely in a small volume (∼1.5 mL) of 0.01 mol.L−1 HCl proving its potentials as a novel solid phase extractant for 68Ge/68Ge generator system. Image 1 • Novel approach towards synthesis of chitosan-TiO 2 microsphere (C-TOM). • Superlative physical and chemical stability of C-TOM in 0.01 M HCl. • Separation of 68Ga from 68Ge with high radionuclidic purity. • Consistent 68Ga elution profile with low 68Ge breakthrough. • Possible application of C-TOM as a potential 68Ge/68Ga generator material. [ABSTRACT FROM AUTHOR]

64 Cu and 67 Cu are theragnostic pair radionuclides with promising application in the nuclear medicine. 64 Cu is PET nuclide for the non-invasive diagnosis and 67 Cu is beta emitter for therapy of various cancers. This study discusses optimization efforts in the production of these radioactive coppers carried out with 30 MeV cyclotron. Optimized conditions include target preparation, chemical separation, and quality control. The production routes of 64 Cu and 67 Cu were studied based on the nuclear reactions of 64 Ni(p,n) 64 Cu and 70 Zn(p,α) 67 Cu. The produced 64 Cu and 67 Cu have >99.9% of the radionuclidic purity. The yield at the end of bombardment (EOB) of 64 Cu and 67 Cu is 28.5 MBq/μAh and 67 Cu is 0.58 MBq/μAh, respectively., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Lee, Chae, Hur, Yang, Kong, Lee, Ju, Choi and Park.)

In imparting wetting properties, a fabrication process without the addition of new compounds and deposition of coating layers would be the most desirable because it does not introduce additional complexities. Hence, the ion beam irradiation technique is used as it enables the chemistry of materials to be modified through simple adjustments of irradiation parameters such as the type of accelerated particles, beam energy, and fluence. In this study, the hydrophilicity of alumina surfaces was weakened by irradiating He ion beams of different energy levels (200 keV and 20 MeV). These transitions become more pronounced as the total beam fluence increases. In low-energy irradiation, the effect of irradiation is predominant near the surface, and hydrophilicity is weakened by the increase in carbon adsorption and suppression of dissociative adsorption of water molecules owing to the introduction of oxygen vacancies. In contrast, nuclear transmutations are induced by irradiation with high-energy beams. Consequently, fluorine is generated, and hydrophobic functional groups are formed on the surface. By varying the beam conditions, the wetting properties of the target ceramic can be controlled to the desired level, which is required in various industries, via appropriate adjustments of the beam parameters. In addition, the beam irradiation technique may be applicable to all ceramic materials, including lattice oxygen and alumina.