Search

Turbidity stands as a crucial indicator for assessing water quality, and while turbidity sensors exist, their high cost prohibits their extensive use. In this paper, we introduce an innovative turbidity sensor, and it is the first low-cost turbidity sensor that is designed specifically for long-term stormwater in-field monitoring. Its low cost (USD 23.50) enables the implementation of high spatial resolution monitoring schemes. The sensor design is available under open hardware and open-source licences, and the 3D-printed sensor housing is free to modify based on different monitoring purposes and ambient conditions. The sensor was tested both in the laboratory and in the field. By testing the sensor in the lab with standard turbidity solutions, the proposed low-cost turbidity sensor demonstrated a strong linear correlation between a low-cost sensor and a commercial hand-held turbidimeter. In the field, the low-cost sensor measurements were statistically significantly correlated to a standard high-cost commercial turbidity sensor. Biofouling and drifting issues were also analysed after the sensors were deployed in the field for more than 6 months, showing that both biofouling and drift occur during monitoring. Nonetheless, in terms of maintenance requirements, the low-cost sensor exhibited similar needs compared to the GreenSpan sensor.

We designed an out-of-water radar water velocity and depth sensor, which is unique due to its low cost and low power consumption. The sensor is a first at a cost of less than USD 50, which is well suited to previously cost-prohibited high-resolution monitoring schemes. This use case is further supported by its out-of-water operation, which provides low-effort installations and longer maintenance-free intervals when compared with in-water sensors. The inclusion of both velocity and depth measurement capabilities allows the sensor to also be used as an all-in-one solution for flowrate measurement. We discuss the design of the sensor, which has been made freely available under open-hardware and open-source licenses. The design uses commonly available electronic components, and a 3D-printed casing makes the design easy to replicate and modify. Not before seen on a hydrology sensor, we include a 3D-printed radar lens in the casing, which boosts radar sensitivity by 21 dB. The velocity and depth-sensing performance were characterised in laboratory and in-field tests. The depth is accurate to within ±6% and ±7 mm and the uncertainty in the velocity measurements ranges from less than 30% to 36% in both laboratory and field conditions. Our sensor is demonstrated to be a feasible low-cost design which nears the uncertainty of current, yet more expensive, velocity sensors, especially when field performance is considered.

Background: The intense interactions between people, animals and environmental systems in urban informal settlements compromise human and environmental health. Inadequate water and sanitation services, compounded by exposure to flooding and climate change risks, expose inhabitants to environmental contamination causing poor health and wellbeing and degrading ecosystems. However, the exact nature and full scope of risks and exposure pathways between human health and the environment in informal settlements are uncertain. Existing models are limited to microbiological linkages related to faecal-oral exposures at the individual level, and do not account for a broader range of human-environmental variables and interactions that affect population health and wellbeing., Methods: We undertook a 12-month health and environmental assessment in 12 flood-prone informal settlements in Makassar, Indonesia. We obtained caregiver-reported health data, anthropometric measurements, stool and blood samples from children < 5 years, and health and wellbeing data for children 5-14 years and adult respondents. We collected environmental data including temperature, mosquito and rat species abundance, and water and sediment samples. Demographic, built environment and household asset data were also collected. We combined our data with existing literature to generate a novel planetary health model of health and environment in informal settlements., Results: Across the 12 settlements, 593 households and 2764 participants were enrolled. Two-thirds (64·1%) of all houses (26·3-82·7% per settlement) had formal land tenure documentation. Cough, fever and diarrhoea in the week prior to the survey were reported among an average of 34.3%, 26.9% and 9.7% of children aged < 5 years, respectively; although proportions varied over time, prevalence among these youngest children was consistently higher than among children 5-14 years or adult respondents. Among children < 5 years, 44·3% experienced stunting, 41·1% underweight, 12.4% wasting, and 26.5% were anaemic. There was self- or carer-reported poor mental health among 16.6% of children aged 5-14 years and 13.9% of adult respondents. Rates of potential risky exposures from swimming in waterways, eating uncooked produce, and eating soil or dirt were high, as were exposures to flooding and livestock. Just over one third of households (35.3%) had access to municipal water, and contamination of well water with E. coli and nitrogen species was common. Most (79·5%) houses had an in-house toilet, but no houses were connected to a piped sewer network or safe, properly constructed septic tank. Median monthly settlement outdoor temperatures ranged from 26·2 °C to 29.3 °C, and were on average, 1·1 °C warmer inside houses than outside. Mosquito density varied over time, with Culex quinquefasciatus accounting for 94·7% of species. Framed by a planetary health lens, our model includes four thematic domains: (1) the physical/built environment; (2) the ecological environment; (3) human health; and (4) socio-economic wellbeing, and is structured at individual, household, settlement, and city/beyond spatial scales., Conclusions: Our planetary health model includes key risk factors and faecal-oral exposure pathways but extends beyond conventional microbiological faecal-oral enteropathogen exposure pathways to comprehensively account for a wider range of variables affecting health in urban informal settlements. It includes broader ecological interconnections and planetary health-related variables at the household, settlement and city levels. It proposes a composite framework of markers to assess water and sanitation challenges and flood risks in urban informal settlements for optimal design and monitoring of interventions., (Copyright © 2021 The Authors. Published by Elsevier Ltd.. All rights reserved.)

High-resolution data collection of the urban stormwater network is crucial for future asset management and illicit discharge detection, but often too expensive as sensors and ongoing frequent maintenance works are not affordable. We developed an integrated water depth, electrical conductivity (EC), and temperature sensor that is inexpensive (USD 25), low power, and easily implemented in urban drainage networks. Our low-cost sensor reliably measures the rate-of-change of water level without any re-calibration by comparing with industry-standard instruments such as HACH and HORIBA's probes. To overcome the observed drift of level sensors, we developed an automated re-calibration approach, which significantly improved its accuracy. For applications like monitoring stormwater drains, such an approach will make higher-resolution sensing feasible from the budget control considerations, since the regular sensor re-calibration will no longer be required. For other applications like monitoring wetlands or wastewater networks, a manual re-calibration every two weeks is required to limit the sensor's inaccuracies to ±10 mm. Apart from only being used as a calibrator for the level sensor, the conductivity sensor in this study adequately monitored EC between 0 and 10 mS/cm with a 17% relative uncertainty, which is sufficient for stormwater monitoring, especially for real-time detection of poor stormwater quality inputs. Overall, our proposed sensor can be rapidly and densely deployed in the urban drainage network for revolutionised high-density monitoring that cannot be achieved before with high-end loggers and sensors.

Stormwater constructed wetlands are not well characterised for their ability to remove pathogens which can pose public health risks during stormwater harvesting activities. This study investigated the behaviour of faecal indicator organism Escherichia coli (E. coli) and reference pathogen Campylobacter spp. in stormwater constructed wetlands, using a case study system located in Melbourne, Australia. Grab sampling and event-based monitoring revealed influent concentrations of E. coli were typical of other urban stormwater studies, yet Campylobacter concentrations were orders of magnitude above those urban stormwater studies used to develop the Australian Guidelines for Water Recycling, reached levels typical of raw domestic wastewater. The wetland consistently removed E. coli from stormwater (mean log removal 0.96, range 0.19-1.79), while Campylobacter spp. concentrations were often higher in outflow than inflow (mean log removal 0.05, range -0.9-1.25). These results indicate that E. coli is a poor indicator for this reference pathogen. The log reductions of both organisms also failed to meet the criteria specified for any end-use, as listed in the Australian Guidelines for Water Recycling, suggesting further treatment is required prior to harvesting. Finally, this study proposed that direct faecal deposition by waterfowl faeces was a microbial source to stormwater wetlands and that this was partly responsible for the varied microbial removal rates observed. Overall, this work validates the need for further characterisation of pathogens in raw urban stormwater, and the ability for water sensitive urban design features, such as wetlands, to remove both indicator and pathogenic microorganisms., (Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.)

Stormwater is a major driving factor of aquatic ecosystem degradation as well as one of the largest untapped urban freshwater resources. We present results from a long-term, multi-catchment study of urban stormwater pesticides across Australia that addresses this dichotomous identity (threat and resource), as well as dominant spatial and temporal patterns in stormwater pesticide composition. Of the 27 pesticides monitored, only 19 were detected in Australian stormwater, five of which (diuron, MCPA, 2,4-D, simazine, and triclopyr) were found in >50% of samples. Overall, stormwater pesticide concentrations were lower than reported in other countries (including the United States, Canada and Europe), and exceedances of public health and aquatic ecosystem standards were rare (<10% of samples). Spatio-temporal patterns were investigated with principal component analysis. Although stormwater pesticide composition was relatively stable across seasons and years, it varied significantly by catchment. Common pesticide associations appear to reflect 1) user application of common registered formulations containing characteristic suites of active ingredients, and 2) pesticide fate properties (e.g., environmental mobility and persistence). Importantly, catchment-specific occurrence patterns provide opportunities for focusing treatment approaches or stormwater harvesting strategies., (Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.)

Faecal contamination of recreational waters is an increasing global health concern. Tracing the source of the contaminant is a vital step towards mitigation and disease prevention. Total 16S rRNA amplicon data for a specific environment (faeces, water, soil) and computational tools such as the Markov-Chain Monte Carlo based SourceTracker can be applied to microbial source tracking (MST) and attribution studies. The current study applied artificial and in-laboratory derived bacterial communities to define the potential and limitations associated with the use of SourceTracker, prior to its application for faecal source tracking at three recreational beaches near Port Phillip Bay (Victoria, Australia). The results demonstrated that at minimum multiple model runs of the SourceTracker modelling tool (i.e. technical replicates) were required to identify potential false positive predictions. The calculation of relative standard deviations (RSDs) for each attributed source improved overall predictive confidence in the results. In general, default parameter settings provided high sensitivity, specificity, accuracy and precision. Application of SourceTracker to recreational beach samples identified treated effluent as major source of human-derived faecal contamination, present in 69% of samples. Site-specific sources, such as raw sewage, stormwater and bacterial populations associated with the Yarra River estuary were also identified. Rainfall and associated sand resuspension at each location correlated with observed human faecal indicators. The results of the optimised SourceTracker analysis suggests that local sources of contamination have the greatest effect on recreational coastal water quality., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Campylobacter is the leading agent of diarrheal disease worldwide. This study evaluates a novel culture-PCR hybrid (MPN-PCR) assay for the rapid enumeration of Campylobacter spp. from estuarine and wastewater systems. To first evaluate the current, culture-based, Australian standard, an inter-laboratory study was conducted on 69 subsampled water samples. The proposed Most-Probable Number (MPN)-PCR method was then evaluated, by analysing 147 estuarine samples collected over a 2 year period. Data for 14 different biological, hydrological and climatic parameters were also collated to identify pathogen-environment relationships and assess the potential for method specific bias. The results demonstrated that the intra-laboratory performance of the MPN-PCR was superior to that of AS/NZS (σ = 0.7912, P < 0.001; κ = 0.701, P < 0.001) with an overall diagnostic accuracy of ~94%. Furthermore, the analysis of both MPN-PCR and AS/NZS identified the potential for the introduction of method specific bias during assessment of the effects of environmental parameters on Campylobacter spp. numbers.