Search

Introduction & objectives: Stem cell therapy for regenerative medicine has been sincerely investigated, but not still popular although some clinical trials show hopeful results. This therapy is suggested to be a representative candidate such as bone defect due to the accident, iatrogenic resection oncological tumor, congenital disease, and severe periodontitis in oral region. Recently, the Bio-3D printer ''Regenova®'' has been introduced as an innovative three-dimensional culture system, equipped scaffold-free bio-assembling techniques without any biomaterials. Therefore, we expected a mount of bone defect could be repaired by the structure established from this Bio-3D printer using osteogenic potential stem cells. Material & methods: The gingival tissue (1x1 mm) was removed from the distal part of the lower wisdom tooth of the patients who agreed our study. Human Gingival Mesenchymal Stem Cells (hGMSCs) were isolated from this tissue and cultured, since we confirmed the characteristics such as facile isolation and accelerated proliferation, further, strong potential of osteogenic-differentiation. Spheroids were formed using hGMSC in 96-well plates designed for low cell adhesion. The size of the spheroids was measured, and fluorescent immunostaining was employed to verify the expression of stem cell and apoptosis marker, and extracellular matrix. Following four weeks of bone differentiation, μCT imaging was performed. Calcification was confirmed by alizarin red and von Kossa staining. Fluorescent immunostaining was utilized to assess the expression of markers indicative of advanced bone differentiation. Results: We have established and confirmed the spheroids (∼600 μm in diameter) constructed from human GMSCs (hGMSCs) still maintain stem cell potentials and osteogenic differentiation abilities from the results that CD73 and not CD34 were expressed as stem cell positive and negative marker, respectively. These spheroids were pilled up like cylindal shape to the “Kenzan” platform of Bio-3D printer and cultured for 7days. The cylindal structure originated from compound spheroids were tried to differentiate into bone four weeks with osteogenic induction medium. The calcification of bio-3D printed bone-like structures was confirmed by alizarin red and Von Kossa staining. In addition, μCT analysis revealed that the HU (Hounsfield Unit) of the calcified structures was almost identical to that of trabecular bone. Immunofluorescent staining detected osteocalcin expression, a late-stage bone differentiation marker. Conclusion: For the first time, we have achieved the construction of a scaffold-free, bone-like luminal structure through the assembly of spheroids comprised of this hGMSCs. This success is sure to be close to the induction of clinical application against regenerative medicine especially for bone defect disease.

Background: To date, there is no effective long-lasting treatment for cartilage tissue repair. Primary chondrocytes and mesenchymal stem/stromal cells are the most commonly used cell sources in regenerative medicine. However, both cell types have limitations, such as dedifferentiation, donor morbidity, and limited expansion. Here, we report a stepwise differentiation method to generate matrix-rich cartilage spheroids from induced pluripotent stem cell-derived mesenchymal stem/stromal cells (iMSCs) via the induction of neural crest cells under xeno-free conditions.Methods: The genes and signaling pathways regulating the chondrogenic susceptibility of iMSCs generated under different conditions were studied. Enhanced chondrogenic differentiation was achieved using a combination of growth factors and small-molecule inducers.Results: We demonstrated that the use of a thienoindazole derivative, TD-198946, synergistically improves chondrogenesis in iMSCs. The proposed strategy produced controlled-size spheroids and increased cartilage extracellular matrix production with no signs of dedifferentiation, fibrotic cartilage formation, or hypertrophy in vivo.Conclusion: These findings provide a novel cell source for stem cell-based cartilage repair. Furthermore, since chondrogenic spheroids have the potential to fuse within a few days, they can be used as building blocks for biofabrication of larger cartilage tissues using technologies such as the Kenzan Bioprinting method.

Introduction: Differentiation of hepatocytes and culture methods have been investigated in dogs as a tool to establish liver transplant and drug metabolism examination systems. However, mass culture techniques for canine hepatocytes (cHep) have not been investigated, and it is necessary to construct a suitable culture system. Recently, a protocol called Bud production has attracted attention, and a mixed culture of human and mouse hepatocytes, stem cells, and artificial blood vessels significantly improved the size and formation ratio of spheroids. The purpose of this study was to investigate and improve the in vitro culture of cHep by mixing canine adipose-derived mesenchymal stem cells (cASCs) and human umbilical vein endothelial cells (HUVECs). Methods: Spheroid formation ratio and histological examination were evaluated among four culture methods, including cHep alone, two-mix (cHep + cASCs and cHep + HUVEC), and three-mix (cHep + HUVEC + cASCs), on days 0, 4, and 7. Expression levels of liver-related genes (ALB, AFP, α1-AT, CDH1, CYP2E1, CYP3A12, and TAT) were evaluated by quantitative real-time polymerase chain reaction (RT-PCR). Protein expression of albumin, vimentin, and von Willebrand Factor (vWF) was investigated to confirm the location of the hepatocytes. Results: The ratio of spheroid formation was 60.2% in the three-mix culture and was significantly improved compared with cHep alone (5.9%) and two-mix; cHep + cASCs (36.2%) and cHep + HUVEC (26.4%) (P

Abstract Background Medical interventions for subchondral bone cysts in horses have been extensively studied. This study investigated the regeneration of articular cartilage and subchondral bone with scaffold-free three-dimensional (3D) constructs of equine synovial membrane-derived mesenchymal stem cells (SM-MSCs) isolated from three ponies and expanded until over 1.0 × 107 cells at passage 2 (P2). Results SM-MSCs were strongly positive for CD11a/CD18, CD44, and major histocompatibility complex (MHC) class I; moderately positive for CD90, CD105, and MHC class II; and negative for CD34 and CD45 on flow cytometry and differentiated into osteogenic, chondrogenic, and adipogenic lineages in the tri-lineage differentiation assay. After culturing SM-MSCs until P3, we prepared a construct (diameter, 6.3 mm; height, 5.0 mm) comprising approximately 1920 spheroids containing 3.0 × 104 cells each. This construct was confirmed to be positive for type I collagen and negative for type II collagen, Alcian blue, and Safranin-O upon histological analysis and was subsequently implanted into an osteochondral defect (diameter, 6.8 mm; depth, 5.0 mm) at the right femoral medial condyle. The contralateral (left femoral) defect served as the control. At 3 and 6 months after surgery, the radiolucent volume (RV, mm3) of the defects was calculated based on multiplanar reconstruction of computed tomography (CT) images. Magnetic resonance (MR) images were evaluated using a modified two-dimensional MR observation of cartilage repair tissue (MOCART) grading system, while macroscopic (gross) and microscopic histological characteristics were scored according to the International Cartilage Repair Society (ICRS) scale. Compared to the control sites, the implanted defects showed lower RV percentages, better total MOCART scores, higher average gross scores, and higher average histological scores. Conclusions Implantation of a scaffold-free 3D-construct of SM-MSCs into an osteochondral defect could regenerate the original structure of the cartilage and subchondral bone over 6 months post-surgery in horses, indicating the potential of this technique in treating equine subchondral bone cysts.

Introduction: Biliary strictures after bile duct injury or duct-to-duct biliary reconstruction are serious complications that markedly reduce patients’ quality of life because their treatment involves periodic stent replacements. This study aimed to create a scaffold-free tubular construct as an interposition graft to treat biliary complications. Methods: Scaffold-free tubular constructs of allogeneic pig fibroblasts, that is, fibroblast tubes, were created using a Bio-3D Printer and implanted into pigs as interposition grafts for duct-to-duct biliary reconstruction. Results: Although the fibroblast tube was weaker than the native bile duct, it was sufficiently strong to enable suturing. The pigs' serum hepatobiliary enzyme levels remained stable during the experimental period. Micro-computed tomography showed no biliary strictures, no biliary leakages, and no intrahepatic bile duct dilations. The tubular structure was retained in all resected specimens, and the fibroblasts persisted at the graft sites. Immunohistochemical analyses revealed angiogenesis in the fibroblast tube and absence of extensions of the biliary epithelium into the fibroblast tube's lumen. Conclusions: This study's findings demonstrated successful reconstruction of the extrahepatic bile duct with a scaffold-free tubular construct created from pig fibroblasts using a novel Bio-3D Printer. This construct could provide a novel regenerative treatment for patients with hepatobiliary diseases.

Osteoarthritis is a major joint disease for which medical interventions have been extensively investigated in humans and animals. In this study, we examined the regeneration of articular cartilage and subchondral bone using a scaffold-free construct consisting of adipose tissue-derived mesenchymal stem cells (AT-MSCs) fabricated using a bio three-dimensional (3D) printer. AT-MSCs were isolated from three rabbits and cultured to a number of sufficient for creation of 3D-printed constructs. One construct consisted of 960 spheroids obtained from 3.5 × 104 autologous AT-MSCs. The construct was then implanted into an osteochondral defect (diameter 4 mm and depth 4 mm) surgically bored into the left femoral trochlear groove of each rabbit. Three months after implantation, healing was assessed by computed tomography, magnetic resonance (MR) imaging, and pathology. MR images were evaluated based on a modified two-dimensional (2D)-magnetic resonance observation of cartilage repair tissue (MOCART) grading system, and gross and microscopic histology were scored according to the International Cartilage Repair Society scale. At the time of imaging, treated defects had become radiopaque, while control defects remained radiolucent. Total 2D-MOCART scores were higher in the implanted defects than in the controls, but not to a statistically significant extent. Similarly, average histological scores were comparable among all groups, although average gross scores were significantly higher in implanted defects than in controls. This is the first demonstration of a scaffold-free 3D-printed construct consisting of autologous AT-MSCs regenerating cartilage and subchondral bone within three months.

Engineered heart tissues (EHTs) that are fabricated using human induced pluripotent stem cells (hiPSCs) have been considered as potential cardiac tissue substitutes in case of heart failure. In the present study, we have created hiPSC-derived cardiac organoids (hiPSC-COs) comprised of hiPSC-derived cardiomyocytes, human umbilical vein endothelial cells, and human fibroblasts. To produce a beating conduit for patients suffering from congenital heart diseases, we constructed scaffold-free tubular EHTs (T-EHTs) using hiPSC-COs and bio-3D printing with needle arrays. The bio-3D printed T-EHTs were cut open and transplanted around the abdominal aorta as well as the inferior vena cava (IVC) of NOG mice. The transplanted T-EHTs were covered with the omentum, and the abdomen was closed after completion of the procedure. Additionally, to compare the functionality of hiPSC-COs with that of T-EHTs, we transplanted the former around the aorta and IVC as well as injecting them into the subcutaneous tissue on the back of the mice. After 1 m of the transplantation procedures, we observed the beating of the T-EHTs in the mice. In histological analysis, the T-EHTs showed clear striation of the myocardium and vascularization compared to hiPSC-COs transplanted around the aorta or in subcutaneous tissue. Based on these results, bio-3D-printed T-EHTs exhibited a better maturation in vivo as compared to the hiPSC-COs. Therefore, these beating T-EHTs may form conduits for congenital heart disease patients, and T-EHT transplantation can form a treatment option in such cases.

Introduction: Tendon tissue engineering requires scaffold-free techniques for safe and long-term clinical applications and to explore alternative cell sources to tenocytes. Therefore, we histologically assessed tendon formation in a scaffold-free Bio-three-dimensional (3D) construct developed from normal human dermal fibroblasts (NHDFs) using our Bio-3D printer system under tensile culture in vitro. Methods: Scaffold-free ring-like tissues were constructed from 120 multicellular spheroids comprising NHDFs using a bio-3D printer. Ring-like tissues were cultured in vitro under static tensile-loading with or without in-house tensile devices (tension-loaded and tension-free groups), with increases in tensile strength applied weekly to the tensile-loaded group. After a 4 or 8-week culture on the device, we evaluated histological findings according to tendon-maturing score and immunohistological findings of the middle portion of the tissues for both groups (n = 4, respectively). Results: Histology of the tension-loaded group revealed longitudinally aligned collagen fibers with increased collagen deposition and spindle-shaped cells with prolonged culture. By contrast, the tension-free group showed no organized cell arrangement or collagen fiber structure. Additionally, the tension-loaded group showed a significantly improved tendon-maturing score as compared with that for the tension-free group at week 8. Moreover, immunohistochemistry revealed tenascin C distribution with a parallel arrangement in the tensile-loading direction at week 8 in the tension-loaded group, which exhibited stronger scleraxis-staining intensity than that observed in the tension-free group at weeks 4 and 8. Conclusions: The NHDF-generated scaffold-free Bio-3D construct underwent remodeling and formed tendon-like structures under tensile culture in vitro. Keywords: Tendon formation, In vitro study, Scaffold-free, Multicellular spheroid, Tensile culture, Human dermal fibroblast

The development of tissue-engineered vascular grafts heavily relies on the availability of large animal models that allow long-term assessment of graft patency. Here Itoh et al. propose a novel model of immunodeficient pigs that allows long-term accommodation of human cell-derived three-dimensional bioprinted vascular tubes.

Previously, we developed a Bio3D conduit fabricated from human fibroblasts and reported a significantly better outcome compared with artificial nerve conduit in the treatment of rat sciatic nerve defect. The purpose of this study is to investigate the long-term safety and nerve regeneration of Bio3D conduit compared with treatments using artificial nerve conduit and autologous nerve transplantation. We used 15 immunodeficient rats and randomly divided them into three groups treated with Bio3D ( n = 5) conduit, silicon tube ( n = 5), and autologous nerve transplantation ( n = 5). We developed Bio3D conduits composed of human fibroblasts and bridged the 5 mm nerve gap created in the rat sciatic nerve. The same procedures were performed to bridge the 5 mm gap with a silicon tube. In the autologous nerve group, we removed the 5 mm sciatic nerve segment and transplanted it. We evaluated the nerve regeneration 24 weeks after surgery. Toe dragging was significantly better in the Bio3D group (0.20 ± 0.28) than in the silicon group (0.6 ± 0.24). The wet muscle weight ratios of the tibial anterior muscle of the Bio3D group (79.85% ± 5.47%) and the autologous nerve group (81.74% ± 2.83%) were significantly higher than that of the silicon group (66.99% ± 3.51%). The number of myelinated axons and mean myelinated axon diameter was significantly higher in the Bio3D group (14708 ± 302 and 5.52 ± 0.44 μm) and the autologous nerve group (14927 ± 5089 and 6.04 ± 0.85 μm) than the silicon group (7429 ± 1465 and 4.36 ± 0.21 μm). No tumors were observed in any of the rats in the Bio3D group at 24 weeks after surgery. The Bio3D group showed significantly better nerve regeneration and there was no significant difference between the Bio3D group and the nerve autograft group in all endpoints.

We previously reported that a nerve conduit created from fibroblasts promotes nerve regeneration in a rat sciatic nerve model. This study aims to determine whether a nerve conduit created from bone marrow stromal cells (BMSCs) can promote nerve regeneration. Primary BMSCs were isolated from femur bone marrow of two Lewis rats, and cells at passages 4–7 were used. We created seven Bio 3D nerve conduits from BMSCs using a Bio-3D Printer. The conduits were transplanted to other Lewis rats to bridge 5-mm right sciatic nerve gaps (Bio 3D group, n = 7). We created two control groups: a silicone group (S group, n = 5) in which the same nerve gap was bridged with a silicone tube, and a silicone cell group (SC group, n = 5) in which the gap was bridged with a BMSC injection. Twelve weeks after transplantation, nerve regeneration was evaluated functionally and morphologically. In addition, PKH26-labeled BMSCs were used to fabricate a Bio 3D conduit that was transplanted for cell trafficking analysis. Electrophysiological study, kinematic analysis, wet muscle weight, and morphological parameters showed significantly better nerve regeneration in the Bio 3D group than in the S group or SC group. In immunohistochemical studies, sections from the Bio 3D group contained abundant S-100-positive cells. In cell trafficking analysis, PKH26-positive cells stained positive for the Schwann cell markers S-100, p75NTR, and GFAP. Bio 3D nerve conduits created from BMSCs can promote peripheral nerve regeneration in a rat sciatic nerve model through BMSC differentiation into Schwann-like cells.

Cryopreservation is a method used for preserving living cells by cooling them to very low temperatures. Although cryopreservation methods for oocytes and embryos have been developed for use in reproductive medicine, there are no established methods yet for preserving cell aggregates (spheroids) in regenerative medicine. We have developed a bio-three-dimensional (3D) printer that can fabricate scaffold-free 3D constructs by loading spheroids onto a needle array. We fabricated several constructs such as blood vessels, liver, diaphragm, and a conduit for nerves by using this method. These constructs have the potential to be applied in patients. However, the process of fabricating tissue constructs (harvesting cells, expanding cells, making spheroids using cultured cells, printing constructs, and maturing constructs) is time-consuming. Therefore, cryopreservation methods for spheroids or constructs should be developed to increase the efficiency of this method for clinical use. Here, we developed a method for cryopreserving spheroids, which were then used to fabricate constructs. Fibroblast cell-based spheroids were cryopreserved in phosphate-buffered saline or cryopreservation solution at -80°C for 1 week. After thawing, spheroids in cryopreservation solution began to fuse on day 1. Cryopreserved spheroids were printed onto a needle array to fabricate a scaffold-free tubular construct using a bio-3D printer. After 7 days, the printed spheroids fused and formed scaffold-free constructs. We confirmed the viability of cells in the cryopreserved spheroids and fabricated tubular constructs. Our results indicate that spheroids can be cryopreserved and used to prepare scaffold-free constructs for clinical use.

[This corrects the article DOI: 10.1371/journal.pone.0230428.].

[This corrects the article DOI: 10.1371/journal.pone.0209162.].

Background: Although autogenous bone implantation is considered to be the gold standard for the reconstruction of bone defects, this approach remains challenging when treating extensive bone defects (EBDs). Therefore, artificial materials (AMs) such as artificial bone and scaffolds are often used for treating EBDs. Nevertheless, complications such as material failure, foreign body reaction, and infection are common. To overcome these issues, we aimed to develop a new treatment for an EBD using scaffold-free adipose-derived stromal cells (ADSCs) to fabricate chondrogenic/osteogenic-induced constructs without AMs. Methods: ADSCs were obtained from the subcutaneous adipose tissue of 8-week-old female Wistar rats (n = 3) and assessed to determine their potential for multilineage differentiation into adipocytes (Oil Red O staining), chondrocytes (hematoxylin and eosin, Alcian blue, and Safranin O staining), and osteoblasts (Alizarin red and von Kossa staining). Spheroids (n = 320), each containing 3.0 × 104 ADSCs, were then used to fabricate scaffold-free cell constructs using a bio-3D printer with a needle array. The spheroids and constructs were stimulated with induction medium to induce chondrogenic and osteogenic differentiation. The induced cartilage- and bone-like constructs were finally evaluated using micro-computed tomography (μCT) and histological analysis. Results: The collected ADSCs were capable of trilineage differentiation, and were successfully used to produce scaffold-free constructs. The fabricated constructs (n = 3) exhibited equivalent strength (load, 195.3 ± 6.1 mN; strength, 39.1 ± 1.2 kPa; and stiffness, 0.09 ± 0.01 N/mm) to that of soft tissues such as the muscles in the uninduced condition. In chondrogenic induction experiments, Alcian blue and Safranin O staining confirmed the differentiation of the constructs into cartilage, and cartilage tissue-like structures were produced. In the osteogenic induction experiment, Alizarin Red and von Kossa staining showed calcium salt deposition, and μCT images confirmed the same calcification level as that of the cortical bone. Conclusions: Scaffold-free constructs consisting of ADSCs without an AM were fabricated, and cartilage- and bone-like tissues were successfully generated, demonstrating their potential for bone reconstruction.

Abstract Cell-based therapy has been proposed as an alternative to orthotopic liver transplantation. The novel transplantation of an in vitro-generated liver bud might have therapeutic potential. In vivo and ex vivo methods for growing a liver bud are essential for paving the way for the clinical translation of liver bud transplantation. We herein report a novel transplantation method for liver buds that are grown in vivo involving orthotopic transplantation on the transected parenchyma of the liver, which showed long engraftment and marked growth in comparison to heterotopic transplantation. Furthermore, this study demonstrates a method for rapidly fabricating scalable liver-like tissue by fusing hundreds of liver bud-like spheroids using a 3D bioprinter. Its system to fix the shape of the 3D tissue with the needle-array system enabled the fabrication of elaborate geometry and the immediate execution of culture circulation after 3D printing—thereby avoiding an ischemic environment ex vivo. The ex vivo-fabricated human liver-like tissue exhibited self-tissue organization ex vivo and engraftment on the liver of nude rats. These achievements conclusively show both in vivo and ex vivo methods for growing in vitro-generated liver buds. These methods provide a new approach for in vitro-generated liver organoids transplantation.

Autologous nerve grafting is widely accepted as the gold standard treatment for segmental nerve defects. To overcome the inevitable disadvantages of the original method, alternative methods such as the tubulization technique have been developed. Several studies have investigated the characteristics of an ideal nerve conduit in terms of supportive cells, scaffolds, growth factors, and vascularity. Previously, we confirmed that biological scaffold-free conduits fabricated from human dermal fibroblasts promote nerve regeneration in a rat sciatic nerve injury model. The purpose of this study is to evaluate the feasibility of biological scaffold-free conduits composed of autologous dermal fibroblasts using a large-animal model. Six male beagle dogs were used in this study. Eight weeks before surgery, dermal fibroblasts were harvested from their groin skin and grown in culture. Bio 3D conduits were assembled from proliferating dermal fibroblasts using a Bio 3D printer. The ulnar nerve in each dog’s forelimb was exposed under general anesthesia and sharply cut to create a 5 mm interstump gap, which was bridged by the prepared 8 mm Bio 3D conduit. Ten weeks after surgery, nerve regeneration was investigated. Electrophysiological studies detected compound muscle action potentials (CMAPs) of the hypothenar muscles and motor nerve conduction velocity (MNCV) in all animals. Macroscopic observation showed regenerated ulnar nerves. Low-level hypothenar muscle atrophy was confirmed. Immunohistochemical, histological, and morphometric studies confirmed the existence of many myelinated axons through the Bio 3D conduit. No severe adverse event was reported. Hypothenar muscles were re-innervated by regenerated nerve fibers through the Bio 3D conduit. The scaffold-free Bio 3D conduit fabricated from autologous dermal fibroblasts is effective for nerve regeneration in a canine ulnar nerve injury model. This technology was feasible as a treatment for peripheral nerve injury and segmental nerve defects in a preclinical setting.

Various strategies have been attempted to replace esophageal defects with natural or artificial substitutes using tissue engineering. However, these methods have not yet reached clinical application because of the high risks related to their immunogenicity or insufficient biocompatibility. In this study, we developed a scaffold-free structure with a mixture of cell types using bio-three-dimensional (3D) printing technology and assessed its characteristics in vitro and in vivo after transplantation into rats. Normal human dermal fibroblasts, human esophageal smooth muscle cells, human bone marrow-derived mesenchymal stem cells, and human umbilical vein endothelial cells were purchased and used as a cell source. After the preparation of multicellular spheroids, esophageal-like tube structures were prepared by bio-3D printing. The structures were matured in a bioreactor and transplanted into 10-12-week-old F344 male rats as esophageal grafts under general anesthesia. Mechanical and histochemical assessment of the structures were performed. Among 4 types of structures evaluated, those with the larger proportion of mesenchymal stem cells tended to show greater strength and expansion on mechanical testing and highly expressed α-smooth muscle actin and vascular endothelial growth factor on immunohistochemistry. Therefore, the structure with the larger proportion of mesenchymal stem cells was selected for transplantation. The scaffold-free structures had sufficient strength for transplantation between the esophagus and stomach using silicon stents. The structures were maintained in vivo for 30 days after transplantation. Smooth muscle cells were maintained, and flat epithelium extended and covered the inner surface of the lumen. Food had also passed through the structure. These results suggested that the esophagus-like scaffold-free tubular structures created using bio-3D printing could hold promise as a substitute for the repair of esophageal defects.

Background2-Cl-C.OXT-A (COA-Cl) is a novel synthesized adenosine analog that activates Sphingosine-1-phosphate 1 receptor (S1P1R) and combines with the adenosine A1 receptor (A1R) in G proteins and was shown to enhance angiogenesis and improve the brain function in rat stroke models. However, the role of COA-Cl in hearts remains unclear. COA-Cl, which has a similar structure to xanthine derivatives, has the potential to suppress phosphodiesterase (PDE), which is an important factor involved in the beating of heart muscle.Methods and resultsCardiac organoids with fibroblasts, human induced pluripotent stem cell-derived cardiac myocytes (hiPSC-CMs), and hiPSC-derived endothelial cells (hiPSC-ECs) were cultured until they started beating. The beating and contraction of organoids were observed before and after the application of COA-Cl. COA-Cl significantly increased the beating rate and fractional area change in organoids. To elucidate the mechanism underlying these effects of COA-Cl on cardiac myocytes, pure hiPSC-CM spheroids were evaluated in the presence/absence of Suramin (antagonist of A1R). The effects of COA-Cl, SEW2871 (direct stimulator of S1P1R), two positive inotropes (Isoproterenol [ISO] and Forskolin [FSK]), and negative inotrope (Propranolol [PRP]) on spheroids were assessed based on the beating rates and cAMP levels. COA-Cl stimulated the beating rates about 1.5-fold compared with ISO and FSK, while PRP suppressed the beating rate. However, no marked changes were observed with SEW2871. COA-Cl, ISO, and FSK increased the cAMP level. In contrast, the level of cAMP did not change with PRP or SEW2871 treatment. The results were the same in the presence of Suramin as absence. Furthermore, an enzyme analysis showed that COA-Cl suppressed the PDE activity by half.ConclusionsCOA-Cl, which has neovascularization effects, suppressed PDE and increased the contraction of cardiac organoids, independent of S1P1R and A1R. These findings suggest that COA-Cl may be useful as an inotropic agent for promoting angiogenesis in the future.

[This corrects the article DOI: 10.1371/journal.pone.0211339.].

A major challenge in cardiac tissue engineering is the host's immune response to artificial materials. To overcome this problem, we established a scaffold-free system for assembling cell constructs using an automated Bio-3D printer. This printer has previously been used to fabricate other three-dimensional (3D) constructs, including liver, blood vessels, and cartilage. In the present study, we tested the function in vivo of scaffold-free cardiac tubular construct fabricated using this system. Cardiomyocytes derived from induced pluripotent stem cells (iCells), endothelial cells, and fibroblasts were combined to make the spheroids. Subsequently, tubular cardiac constructs were fabricated by Bio-3D printer placing the spheroids on a needle array. Notably, the spheroid fusion and beat rate in the constructs were observed while still on the needle array. After removal from the needle array, electrical stimulation was used to test responsiveness of the constructs. An increased beat rate was observed during stimulation. Importantly, the constructs returned to their initial beat rate after stimulation was stopped. In addition, histological analysis shows cellular reorganization occurring in the cardiac constructs, which may mimic that observed during organ transplantation. Taken together, our results indicate that these engineered cardiac tubular constructs, which address both the limited supply of donor tissues as well as the immune-induced transplant rejection, has potential to be used for both clinical and drug testing applications. To our knowledge, this is the first time that cardiac tubular constructs have been produced using optimized Bio-3D printing technique and subsequently tested for their use as cardiac pumps.

BACKGROUND:Although autologous nerve grafting is the gold standard treatment of peripheral nerve injuries, several alternative methods have been developed, including nerve conduits that use supportive cells. However, the seeding efficacy and viability of supportive cells injected in nerve grafts remain unclear. Here, we focused on a novel completely biological, tissue-engineered, scaffold-free conduit. METHODS:We developed six scaffold-free conduits from human normal dermal fibroblasts using a Bio 3D Printer. Twelve adult male rats with immune deficiency underwent mid-thigh-level transection of the right sciatic nerve. The resulting 5-mm nerve gap was bridged using 8-mm Bio 3D conduits (Bio 3D group, n = 6) and silicone tube (silicone group, n = 6). Several assessments were conducted to examine nerve regeneration eight weeks post-surgery. RESULTS:Kinematic analysis revealed that the toe angle to the metatarsal bone at the final segment of the swing phase was significantly higher in the Bio 3D group than the silicone group (-35.78 ± 10.68 versus -62.48 ± 6.15, respectively; p < 0.01). Electrophysiological studies revealed significantly higher compound muscle action potential in the Bio 3D group than the silicone group (53.60 ± 26.36% versus 2.93 ± 1.84%; p < 0.01). Histological and morphological studies revealed neural cell expression in all regions of the regenerated nerves and the presence of many well-myelinated axons in the Bio 3D group. The wet muscle weight of the tibialis anterior muscle was significantly higher in the Bio 3D group than the silicone group (0.544 ± 0.063 versus 0.396 ± 0.031, respectively; p < 0.01). CONCLUSIONS:We confirmed that scaffold-free Bio 3D conduits composed entirely of fibroblast cells promote nerve regeneration in a rat sciatic nerve model.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Excessive stretching of the vascular wall in accordance with pulmonary arterial hypertension (PAH) induces a variety of pathogenic cellular events in the pulmonary arteries. We previously reported that indoxam, a selective inhibitor for secretory phospholipase A2 (sPLA2), blocked the stretch-induced contraction of rabbit pulmonary arteries by inhibition of untransformed prostaglandin H2 (PGH2) production. The present study was undertaken to investigate involvement of sPLA2 and untransformed PGH2 in the enhanced contractility of pulmonary arteries of experimental PAH in rats. Among all the known isoforms of sPLA2, sPLA2-X transcript was most significantly augmented in the pulmonary arteries of rats with monocrotaline-induced pulmonary hypertension (MCT-PHR). The pulmonary arteries of MCT-PHR frequently showed two types of spontaneous contraction in response to stretch; 27% showed rhythmic contraction, which was sensitive to indoxam and SC-560 (selective COX-1 inhibitor), but less sensitive to NS-398 (selective COX-2 inhibitor); and 47% showed sustained incremental tension (tonic contraction), which was insensitive to indoxam and SC-560, but sensitive to NS-398 and was attenuated to 45% of the control. Only the rhythmically contracting pulmonary arteries of MCT-PHR produced a substantial amount of untransformed PGH2, which was abolished by indoxam. These results suggest that sPLA2-mediated PGH2 synthesis plays an important role in the rhythmic contraction of pulmonary arteries of MCT-PHR. Keywords:: monocrotaline, pulmonary arterial hypertension, rhythmic contraction, prostaglandin H2, secretory phospholipase A2

Involvement of secretory phospholipase A2 (sPLA2) in the stretch-induced production of untransformed prostaglandin H2 (PGH2) in the endothelium of rabbit pulmonary arteries was investigated. The stretch-induced contraction was significantly inhibited by indoxam, a selective inhibitor for sPLA2, and NS-398, a selective inhibitor for cyclooxygenase-2 (COX-2). Indoxam inhibited the RGD-sensitive-integrin–independent production of untransformed PGH2, but did not affect the RGD-sensitive-integrin–dependent production of thromboxane A2 (TXA2). These results suggest that the stretch-induced contraction and untransformed PGH2 production was mediated by sPLA2–COX-2 pathway, making it a new possible target for pharmacological intervention of pulmonary artery contractility. Keywords:: stretch-induced pulmonary artery contraction, secretory phospholipase A2 (sPLA2), indoxam

Abstract.: The involvement of Ca2+ entry via the Na+/Ca2+ exchanger (NCX) in myogenic constriction of rat posterior cerebral arteries was investigated. RT-PCR identified mRNA for NCX1, 2, and 3 in the arteries. Na+ removal increased [Ca2+]i, which was reduced by the NCX inhibitor SEA0400. SEA0400 inhibited the development, but not the steady-state, of pressure-induced myogenic constriction, whereas it decreased both the initial and sustained phases of [Ca2+]i elevation. These results suggest that Ca2+ entry via NCX is involved in the development, but not the steady-state, of pressure-induced myogenic constriction. Keywords:: Na+/Ca2+ exchanger (NCX) 1, arteriograph, fura 2

The present study examined the combined effects of fish-oil-derived ω-3 polyunsaturated fatty acids, including eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), and cyclic stretching on the adipocyte differentiation of 3T3-L1 cells. Treatment with EPA alone did not inhibit the differentiation, although it partially suppressed the expressions of peroxisome proliferator-activated receptor (PPAR)-γ 2and CCAAT/enhancer-binding protein (C/EBP)α transcripts, which are considered to be indispensable for the determination of adipocyte differentiation. However, the differentiation was significantly reduced when EPA but not DHA was concomitantly applied with cyclic stretching. In addition, EPA, but not DHA, could be a substrate of cyclooxygenase (COX)-2, and we found that the stretching significantly augmented the expression of COX-2 and that a selective COX-2 inhibitor (NS-398) inhibited the combined effect of the stretching and EPA. Taken together, it appears that the stretching and EPA exhibit a synergistic effect for the inhibition of adipocyte differentiation through stretch-induced COX-2. Keywords:: adipocyte differentiation, cyclic stretching, peroxisome proliferator-activated receptor, (PPAR)-γ, cyclooxygenase (COX)-2, eicosapentaenoic acid

The involvement of protein kinase C (PKC) in myogenic constriction at physiological intraluminal pressure was investigated in rat posterior cerebral arteries. Changes in constriction and intracellular Ca2+ concentration ([Ca2+]i) were measured in fura 2-loaded arterial segments by pressurized arteriography. When intraluminal pressure was raised from 5 to 60 mmHg and maintained for 60 min, sustained constriction and [Ca2+]i elevation were elicited. The constriction and [Ca2+]i at 60 mmHg gradually declined in the presence of RO31-8220, a general PKC inhibitor, and rottlerin, a PKCδ inhibitor. In contrast, Gö6976, a conventional PKC inhibitor, significantly diminished the constriction with no inhibition on the [Ca2+]i. In the presence of nicardipine, the pressure stimulation to 60 mmHg still produced a small sustained [Ca2+]i elevation. The nicardipine-insensitive [Ca2+]i elevation gradually declined in the presence of rottlerin, and it was nearly abolished by ruthenium red. Immunohistochemical analysis showed positive staining for PKCα, γ, δ, and ε, but not PKCβ, in smooth muscle cells of rat posterior cerebral arteries. These results suggest distinct roles of PKC isoforms in myogenic constriction: conventional PKC mediates Ca2+ sensitization, whereas PKCδ mediates sustained [Ca2+]i elevation via the activation of cation channels, resulting in sustained constriction. Keywords:: mechanotransduction, cation channel, Ca2+ sensitization, protein kinase C, arteriography

[This corrects the article DOI: 10.1371/journal.pone.0136681.].

Small caliber vascular prostheses are not clinically available because synthetic vascular prostheses lack endothelial cells which modulate platelet activation, leukocyte adhesion, thrombosis, and the regulation of vasomotor tone by the production of vasoactive substances. We developed a novel method to create scaffold-free tubular tissue from multicellular spheroids (MCS) using a "Bio-3D printer"-based system. This system enables the creation of pre-designed three-dimensional structures using a computer controlled robotics system. With this system, we created a tubular structure and studied its biological features.Using a "Bio-3D printer," we made scaffold-free tubular tissues (inner diameter of 1.5 mm) from a total of 500 MCSs (2.5× 104 cells per one MCS) composed of human umbilical vein endothelial cells (40%), human aortic smooth muscle cells (10%), and normal human dermal fibroblasts (50%). The tubular tissues were cultured in a perfusion system and implanted into the abdominal aortas of F344 nude rats. We assessed the flow by ultrasonography and performed histological examinations on the second (n = 5) and fifth (n = 5) day after implantation. All grafts were patent and remodeling of the tubular tissues (enlargement of the lumen area and thinning of the wall) was observed. A layer of endothelial cells was confirmed five days after implantation.The scaffold-free tubular tissues made of MCS using a Bio-3D printer underwent remodeling and endothelialization. Further studies are warranted to elucidate the underlying mechanism of endothelialization and its function, as well as the long-term results.

Blood vessels are receptive to hemodynamic forces, such as blood pressure and flow, which result in myogenic responses. The present study aimed to investigate the effect of mechanical stresses on L-type voltage-dependent Ca2+ channels in rabbit cerebral artery myocytes. Cell swelling induced by the exposure to a 16% hypotonic solution increased peak values of whole-cell Ba2+ currents (IBa). Similarly, an elevation of bath perfusion rate increased peak values of IBa. However, the response was reduced by the continued fluid flow stimulation and the current amplitude almost returned to the baseline. This reduction of the current was abolished by pretreatment with thapsigargin, implying the contribution of Ca2+ release from the sarcoplasmic reticulum to the response. These results suggest that L-type Ca2+ currents are facilitated not only by cell swelling but also by fluid flow in cerebral artery myocytes. Keywords:: L-type voltage-dependent Ca2+ channel, rabbit cerebral artery, patch clamp, swelling, flow

The present study investigated the effects of cGMP on cytosolic Ca2+ concentration ([Ca2+]c) of isolated rat pancreatic β-cells. In the presence of 7.0 mM glucose, NOC 7, a nitric oxide (NO) donor, caused an increase in [Ca2+]c of the β-cells, which was abolished by the soluble guanylate cyclase inhibitor ODQ. Similar [Ca2+]c elevation was evoked by 8-bromo-cGMP. The [Ca2+]c elevating responses to NOC 7 and 8-bromo-cGMP were abolished by nicardipine or in a Ca2+-free medium, but were not affected by thapsigargin, suggesting that they are produced by the Ca2+ influx through L-type voltage-operated Ca2+ channels. In contrast, NOC 7 and 8-bromo-cGMP decreased the [Ca2+]c when it was raised in advance by the elevation of external K+ concentration to 30 mM or by 4-aminopyridine. The pretreatment with thapsigargin almost abolished the [Ca2+]c reduction induced by the agents, suggesting that the action is likely to be primarily attributable to an acceleration of the Ca2+ sequestration into the endoplasmic reticulum. These results suggest that cGMP has two distinct effects on the [Ca2+]c of rat pancreatic β-cells: a facilitation of the Ca2+ influx through L-type voltage-operated Ca2+ channels and an acceleration of the Ca2+ sequestration in the endoplasmic reticulum.

Effects of DX-9065a ((+)-2S-2-[4-[[(3S)-1-acetimidoyl-3-pyrrolidinyl]oxy]phenyl]-3-[7-amidino-2-naphthyl]propanoic acid hydrochloride pentahydrate), a dibasic propanoic acid and an inhibitor of factor Xa, were compared with those of argatroban, a low molecular weight thrombin inhibitor, on the ellagic acid-induced plantar skin thrombosis in the rats treated with tetrodotoxin and Nω-nitro-L-arginine. Plantar skin blood flow was measured with laser Doppler flow meters, and skin temperature of the hindlimb was monitored simultaneously. In order to induce thrombus in plantar skin vasculature, ellagic acid (300 μg, i.a.) was injected into a branch of femoral artery. The formation of thrombus in femoral and plantar vessels was assessed by light microscopy. Ellagic acid decreased plantar skin blood flow and skin temperature. Intravenous injections of DX-9065a (3 mg/kg) and argatroban (1 – 3 mg/kg) significantly inhibited the ellagic acid-induced disturbance of plantar skin blood flow and lowering skin temperature without affecting bleeding time. The oral administration of DX-9065a (30 – 100 mg/kg) significantly prevented the decrease in skin temperature induced by ellagic acid, but it partially inhibited the disturbance of plantar skin blood flow. DX-9065a and argatroban also prolonged prothrombin time in a dose-dependent manner. These results suggest that DX-9065a effectively prevented thrombosis produced by ellagic acid in the skin circulation without a risk of bleeding.