Search

A new generation of high-gradient normal conducting 1.3 GHz RF gun with 1% duty factor was developed to provide a high-quality electron source for superconducting linac driven free-electron lasers like FLASH and European XFEL. Compared to the Gun4 series, Gun5 aims for a ~50% longer RF pulse length (RF pulse duration of up to 1 ms at 10 Hz repetition rate) combined with high gradients (up to ~60 MV/m at the cathode). In addition to the improved cell geometry and cooling concept, the new cavity is equipped with an RF probe to measure and control the amplitude and phase of the RF field inside the gun. The first characterization of Gun5.1 included measurements of RF amplitude and phase stability (pulse-to-pulse and along 1 ms RF pulse). The dark current was measured at various peak power levels. The results of this characterization will be reported.

Proceedings of the 31st International Linear Accelerator Conference, LINAC2022, Liverpool, UK 31st Linear Accelerator Conference, LINAC22, Liverpool, United Kingdom, 28 Aug 2022 - 2 Sep 2022; JACoW Publishing, Geneva, Switzerland 699-702 (2022). doi:10.18429/JACoW-LINAC2022-THPOJO03, A new generation of normal conducting 1.3GHz RF gun was developed to provide a high-quality electron source for superconducting linac driven free-electron lasers like FLASH and European XFEL. Compared to the Gun4 series, Gun5 aims for a 50% increase of the duration of the RF pulse (up to 1 ms at 10 Hz repetition rate) combined with high gradients (up to ~60 MV/m at the cathode). In addition to the improved impedance, the new cavity is equipped with an RF probe to measure and control the amplitude and phase of the RF field inside the gun. The first prototype of the new RF gun was manufactured at DESY and installed at the Photo Injector Test facility at DESY in Zeuthen (PITZ) in October 2021. In mid-October 2021 the RF conditioning began, aiming for achieving the aforementioned RF parameters. The conditioning procedure involves a slow gradual increase in repetition rate, RF pulse duration and peak power while carefully monitoring vacuum conditions and signals from interlock sensors. The results of RF conditioning will be reported., Published by JACoW Publishing, Geneva, Switzerland

Proceedings of the 12th International Particle Accelerator Conference, IPAC2021, Campinas, SP, Brazil 12th International Particle Accelerator Conference, IPAC���21, Campinas, SP, Brazil, 24 May 2021 - 28 May 2021; 3 pp. (2021). doi:10.18429/JACOW-IPAC2021-TUPAB122, At the European XFEL, two undulator systems for hard and one for soft X-rays have been successfully put into operation. The SASE3 soft X-ray undulator system generates linearly polarized radiation in the horizontal plane. One of the requirements for extending the radiation characteristics is the ability to obtain different polarization modes. These include both right and left circular, elliptical polarization, or linear polarization at an arbitrary angle. For this purpose, a system consisting of four APPLE X helical undulators developed at the Paul Scherrer Institute (PSI) is used. This paper presents the design parameters of the SASE3 undulator system after modifying it with the helical afterburner. It also describes the methods and the design solutions different from those used at PSI. The status and schedule of the project are introduced.

The SINBAD facility (Short and INnovative Bunches and Accelerators at DESY) is foreseen to host multiple experiments relating to the production of ultra-short electron bunches and novel high gradient acceleration techniques. The SINBAD-ARES linac will be a conventional S-band linear RF accelerator allowing the production of low charge (0.5 pC - tens pC) ultra-short electron bunches (FWHM length =< 1 fs - few fs) with 100 MeV energy. The installation of the linac will proceed in stages. In this paper we report on the status of the characterization of the ARES RF gun and the installations of the related infrastructure., Proceedings of the 9th Int. Particle Accelerator Conf., IPAC2018, Vancouver, BC, Canada