Search

Background: Patient-Specific Surgical Guides (PSSGs) are advocated for reducing radiation exposure, operation time and enhancing precision in surgery. However, existing accuracy assessments are limited to specific surgeries, leaving uncertainties about variations in accuracy across different anatomical sites, three-dimensional (3D) printing technologies and manufacturers (traditional vs. printed at the point of care). This study aimed to evaluate PSSGs accuracy in traumatology and orthopaedic surgery, considering anatomical regions, printing methods and manufacturers., Methods: A systematic review was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis guidelines. Studies were eligible if they (1) assessed the accuracy of PSSGs by comparing preoperative planning and postoperative results in at least two different planes (2) used either computer tomography or magnetic resonance imaging (3) covered the field of orthopaedic surgery or traumatology and (4) were available in English or German language. The 'Quality Assessment Tool for Quantitative Studies' was used for methodological quality assessment. Descriptive statistics, including mean, standard deviation, and ranges, are presented. A random effects meta-analysis was performed to determine the pooled mean absolute deviation between preoperative plan and postoperative result for each anatomic region (shoulder, hip, spine, and knee)., Results: Of 4212 initially eligible studies, 33 were included in the final analysis (8 for shoulder, 5 for hip, 5 for spine, 14 for knee and 1 for trauma). Pooled mean deviation (95% confidence interval) for total knee arthroplasty (TKA), total shoulder arthroplasty (TSA), total hip arthroplasty (THA) and spine surgery (pedicle screw placement during spondylodesis) were 1.82° (1.48, 2.15), 2.52° (1.9, 3.13), 3.49° (3.04, 3.93) and 2.67° (1.64, 3.69), respectively. Accuracy varied between TKA and THA and between TKA and TSA., Conclusion: Accuracy of PSSGs depends on the type of surgery but averages around 2-3° deviation from the plan. The use of PSSGs might be considered for selected complex cases., Level of Evidence: Level 3 (meta-analysis including Level 3 studies)., Competing Interests: The authors declare no conflict of interest., (© 2024 The Author(s). Journal of Experimental Orthopaedics published by John Wiley & Sons Ltd on behalf of European Society of Sports Traumatology, Knee Surgery and Arthroscopy.)

Purpose: The anterolateral ligament (ALL) is an important structure for controlling anterolateral rotatory stability of the knee. Its assessment, however, is difficult using standardized MRI images. The goal of this study was to assess the reliability of judging the integrity of the ALL on multi-planar reformatted (MPR) MRI images and on standard coronal reformatted (SCR) MRI images in knees with an anterior cruciate ligament (ACL) rupture., Methods: Forty-eight patients (14 females, 34 males, 30 ± 6 years (mean age ± standard deviation)) with acute ACL ruptures (< 2 weeks) and no additional knee injuries (except segond fractures) were included. Images were assessed by two independent raters twice with at least a 2-week interval in between. The assessment was first performed on SCR images and thereafter on MPR images. Images were judged for assessability of the ALL and then the integrity of the ALL was rated., Results: Depending on rater and read, the ALL was judged as "torn" in between 5 (10.4%) and 11 (22.9%) patients out of 48 patients on SCR images. On MRP images, the ALL was judged as "torn" in between 5 (10.4%) and 6 (12.5%) patients out of 48 patients, depending on rater and read. Inter- and intra-rater reliability for the assessment of the ALL using MPR images was "substantial" to "almost perfect". Inter- and intra-rater reliability for the assessment using SCR was "fair" to "substantial"., Conclusion: MPR images should be used when assessing the integrity of the ALL. Assessment quality is independent of patient positioning during MRI acquisition and the ALL can be displayed in full length on one image., Level of Evidence: Level III., (© 2023. The Author(s).)

Purpose: The purpose of this study is to report and compare outcome data of both primary and revision cases using a rotating hinge knee (RHK) implant., Methods: This study retrospectively analyzed 63 cases (19 primary, 44 revisions) at a mean follow-up of 34 ± 8 months after RHK implantation. Outcome parameters were stability, range of motion (ROM), loosening, Hospital of Special Surgery Score (HSS), Knee Society Score (KSS), Oxford Knee Score (OKS), EQ-5D-3L, and Visual Analog Scale (VAS) for overall function. Revision rates and implant survival are reported., Results: Eleven percent showed medio-lateral instability < 5 mm, a mean ROM of 115° ± 17° and radiologic loosening occurred in 8% (2% symptomatic). PROMS showed the following results: HSS 79 ± 18, KSS 78 ± 27, OKS 26 ± 10, EQ-5D index 0.741 ± 0.233 and VAS 70 ± 20. Primary cases revealed better outcomes in HHS (p = .035) and OKS (p = 0.047). KSS, EQ-5D index and VAS did not differ between primary and revision cases (p = 0.070; p = 0.377; p = 0.117). Revision rate was 6.3% with an implant survival of 96.8%., Conclusions: RHK arthroplasty can be performed with good clinical outcome and low revision rate in revision and complex primary cases. RHK is an option in cases where standard arthroplasty and even implants with a higher degree of constraint have reached their limits., Level of Evidence: Level III, retrospective cohort study., (© 2022. The Author(s).)

Purpose: Providing long-term outcome data after rTKA and compare one- versus two-stage and septic versus aseptic revisions., Methods: This study represents a single-center retrospective study of first rTKAs performed for any reason with a final follow-up of a minimum of five years. Outcome parameters included stability assessment ROM, radiologic assessment, HSS score, KSS score, OKS score, EQ-5D-3L and VAS. 44 patients were included in the study. Subgroups analysis of one- versus two-stage revision and septic versus aseptic revision was performed., Results: The leading causes of rTKA in this mean 11 year follow-up study were aseptic loosening (36%) and periprosthetic joint infection (27%). At the final follow-up, there was a 89% survivorship of the implants. Patients showed a ROM of 114 ± 13°, HSS score of 78 ± 12, KKS objective score of 77 ± 16, KSS expectation and satisfaction score of 32 ± 11, KSS functional activity score of 50 ± 20, OKS of 30 ± 9, VAS of 53 ± 25 and EQ-5D index of 0.649. Functional outcome scores were not significantly altered in the analyzed subgroups., Conclusions: In our 11 years follow-up, we obtained 89% implant survivorship. Measurements regarding functional outcome and pain showed results in the medium range of the respective scores, while patient satisfaction lay in the upper third. No significant differences in outcome scores between one- and two-stage revisions and septic versus aseptic revisions were observed. Level of Evidence Level III, retrospective cohort study., (© 2022. The Author(s).)

Background: Different surgical techniques have been described for the treatment of knee dislocation (KD). Nonoperative approaches are frequently combined with surgical reconstruction using auto- or allograft., Purpose: To evaluate the midterm results of primary surgical repair and suture augmentation to treat KD., Study Design: Case series; Level of evidence, 4., Methods: A total of 22 patients (5 women, 17 men; mean age, 45 ± 15 years) with KD were evaluated at a mean of 49 ± 16 months after surgical treatment that included primary repair and suture augmentation. Magnetic resonance imaging, stress radiographs, and outcome scores were obtained at the follow-up. Clinical examination including hop tests and force measurements for flexion and extension was performed., Results: The mean difference in pre- to postinjury Tegner scores was -2 ± 1. The outcome scores showed mean values of 84 ± 15 (Lysholm), 73 ± 15 (International Knee Documentation Committee) and 65 ± 25 (Anterior Cruciate Ligament-Return to Sport after Injury scale). Compared with the uninjured knee, the range of motion of the injured knee was reduced by 21° ± 12°. Twelve patients felt fit enough to perform hop tests and showed a mean deficit of 7% ± 17%° compared with the uninjured leg. The mean force deficit was 19% ± 18% for extension and 8% ± 16% for flexion. Stress radiographs revealed an 11 ± 7-mm higher anteroposterior translation on the injured side. Four patients had secondary ligament reconstructions due to persistent instability and 7 underwent arthroscopic arthrolysis due to stiffness. A significant increase of osteoarthritis was found for the medial, lateral, and patellofemoral compartments ( P = .007, .004, and .006, respectively)., Conclusion: Primary repair and suture augmentation of KD led to satisfactory clinical midterm results despite persistent radiological instability and a significant increase in osteoarthritis. This technique allows the return to activities of daily living without subjective instability in most nonathletic patients. Secondary ligament reconstructions should be performed if relevant instability persists to decrease the risk of secondary meniscal and cartilage damage., Competing Interests: The authors declared that there are no conflicts of interest in the authorship and publication of this contribution. AOSSM checks author disclosures against the Open Payments Database (OPD). AOSSM has not conducted an independent investigation on the OPD and disclaims any liability or responsibility relating thereto., (© The Author(s) 2022.)

Background: Comminuted femoral fractures pose a challenge to the trauma surgeon due to the absence of bony references during surgery. Therefore, malalignment of length and axis can occur and necessitate revision surgery. During the last decade, 3D-planning has evolved as a surgical aid in difficult cases., Case Report: An 18-year-old male patient suffered a polytrauma following a motorcycle accident. This report is about the treatment of a 3rd degree open and comminuted fracture of the left distal femur. The fracture was treated with Masquelet's two-staged technique. With the intent of avoiding malalignment, the second stage surgery was performed with the aid of 3D-planned reduction guides. Despite complex fracture pattern, complete fracture union was achieved with acceptable final alignment (side-to-side comparison of length, axis and femoral torsion)., Conclusion: In this case, performing Masquelet's two-staged surgery with the aid of 3D-printed reposition guides yielded favorable results in regards to rotational malalignment. The malrotation of the femur was reduced after the second operation to a clinically acceptable side-to-side difference (10°). This technique remains technically challenging due to soft tissue tension and limited possibility of soft tissue release., (© 2022 The Authors.)

Aims: Traditionally, total hip arthroplasty (THA) templating has been performed on anteroposterior (AP) pelvis radiographs. Recently, additional AP hip radiographs have been recommended for accurate measurement of the femoral offset (FO). To verify this claim, this study aimed to establish quantitative data of the measurement error of the FO in relation to leg position and X-ray source position using a newly developed geometric model and clinical data., Methods: We analyzed the FOs measured on AP hip and pelvis radiographs in a prospective consecutive series of 55 patients undergoing unilateral primary THA for hip osteoarthritis. To determine sample size, a power analysis was performed. Patients' position and X-ray beam setting followed a standardized protocol to achieve reproducible projections. All images were calibrated with the KingMark calibration system. In addition, a geometric model was created to evaluate both the effects of leg position (rotation and abduction/adduction) and the effects of X-ray source position on FO measurement., Results: The mean FOs measured on AP hip and pelvis radiographs were 38.0 mm (SD 6.4) and 36.6 mm (SD 6.3) (p < 0.001), respectively. Radiological view had a smaller effect on FO measurement than inaccurate leg positioning. The model showed a non-linear relationship between projected FO and femoral neck orientation; at 30° external neck rotation (with reference to the detector plane), a true FO of 40 mm was underestimated by up to 20% (7.8 mm). With a neutral to mild external neck rotation (≤ 15°), the underestimation was less than 7% (2.7 mm). The effect of abduction and adduction was negligible., Conclusion: For routine THA templating, an AP pelvis radiograph remains the gold standard. Only patients with femoral neck malrotation > 15° on the AP pelvis view, e.g. due to external rotation contracture, should receive further imaging. Options include an additional AP hip view with elevation of the entire affected hip to align the femoral neck more parallel to the detector, or a CT scan in more severe cases.Cite this article: Bone Jt Open  2022;3(10):795-803.

Purpose: After surgical treatment of comminuted diaphyseal femoral and tibial fractures, relevant malalignment, especially rotational errors occur in up to 40-50%. This either results in a poor clinical outcome or requires revision surgery. This study aims to evaluate the accuracy of reduction if surgery is supported by 3D guides planned and printed at the point of care., Methods: Ten porcine legs underwent computed tomography (CT) and 3D models of femur and tibia were built. Reduction guides were virtually constructed and fitted to the proximal and distal metaphysis. The guides were 3D printed using medically approved resin. Femoral and tibial comminuted diaphyseal fractures were simulated and subsequently reduced using the 3D guides. Postoperative 3D bone models were reconstructed to compare the accuracy to the preoperative planning., Results: Femoral reduction showed a mean deviation ± SD from the plan of 1.0 mm ± 0.9 mm for length, 0.9° ± 0.7° for varus/valgus, 1.2° ± 0.9° for procurvatum/recurvatum and 2.0° ± 1.7° for rotation. Analysis of the tibial reduction revealed a mean deviation ± SD of 2.4 mm ± 1.6 mm for length, 1.0° ± 0.6° for varus/valgus, 1.3° ± 1.4° for procurvatum/recurvatum and 2.9° ± 2.2° for rotation., Conclusions: This study shows high accuracy of reduction with 3D guides planned and printed at the point of care. Applied to a clinical setting, this technique has the potential to avoid malreduction and consecutive revision surgery in comminuted diaphyseal fractures., Level of Evidence: Basic Science., (© 2022. The Author(s).)

Purpose: Anterior cruciate ligament (ACL) repair has been recommended as a treatment principle for ACL tears. Several authors have advocated a potential role for primary repair techniques in the ACL decision tree. However, long-term results have been controversial. This study aims to determine the survival of the primarily repaired ACL after dynamic intraligamentary stabilization (DIS) with and without augmentation., Methods: Between 2014 and 2019, 102 patients with isolated proximal ACL ruptures underwent DIS repair within 21 days from injury and were available for follow-up either clinically or telephonically after ≥5 years postoperatively. In 45 cases, DIS repair was augmented with collagen fleece wrapping, platelet-rich fibrin (PRF) or both. Failure was defined as traumatic re-rupture or conversion to ACL reconstruction. The patients being available for physical examination underwent a.-p. stability measurement with a KT-1000 device. Functional outcome was measured with the IKDC, Tegner and Lysholm scores. Kaplan-Meier survival analysis, Log-Rank Test and Binominal logistic regression were performed., Results: After a minimum 5-year follow-up, 71/102 (69.6%) DIS repairs were not re-reptured and clinically and/or subjectively stable. Augmentation did not improve survival rates (p = 0.812). The identified factors influencing failure were a younger age and a pre-injury Tegner activity level of ≥7. 95.7% of those patients with an intact ACL repair had normal or near normal knee function based on the IKDC scoring system., Conclusions: The 5-year overall survival rate of DIS was 69.6%. Collagen fleece wrapping and local PRF application did not improve survival. Patients not suffering failure of repair demonstrated high satisfaction. Nevertheless, the results are inferior to those of established ACL reconstruction procedures., Level of Evidence: Case series, Level IV., (© 2022. The Author(s).)

The anterolateral ligament (ALL) is subject of the current debate concerning rotational stability in case of anterior cruciate ligament (ACL) injuries. Today, reliable anatomical and biomechanical evidence for its existence and course is available. Some radiologic studies claim to be able to identify the ALL on standard coronal plane MRI sections. In the experience of the authors, however, ALL identification on standard MRI sequences frequently fails and is prone to errors. The reason for this mainly lies in the fact, that the entire ALL often cannot be identified on a single MRI image. This study aimed to establish an MRI evaluation protocol improving the visualization of the ALL, using multiplanar reformation (MPR) with the goal to be able to evaluate the ALL on one MRI image. A total of 47 knee MRIs performed due to atraumatic knee pain between 2018 and 2019 without any pathology were analyzed. Identification of the ALL was performed twice by an orthopedic surgeon and a radiologist on standard coronal plane and after MPR. For the latter axial and coronal alignment was obtained with the femoral condyles as a reference. Then the coronal plane was adjusted to the course of the ALL with the lateral epicondyle as proximal reference. Visualization of the ALL was rated as "complete" (continuous ligamentous structure with a tibial and femoral insertion visible on one coronal image), "partial" (only parts of the ALL like the tibial insertion were visible) and "not visible". The distances of its tibial insertion to the bony joint line, Gerdy's tubercle and the tip of the fibular head were measured. On standard coronal images the ALL was fully visible in 17/47, partially visible in 27/47, and not visible in 3/47 cases. With MPR the ALL was fully visible in 44/47 and not visible in 3/47 cases. The median distance of its tibial insertion to the bony joint line, Gerdy's tubercle and the tip of the fibular head were 9, 21 and 25 mm, respectively. The inter- (ICC: 0.612; 0.645; 0.757) and intraobserver (ICC: 0.632; 0.823; 0.857) reliability was good to excellent. Complete visualization of the ALL on a single MRI image is critical for its identification and evaluation. Applying multiplanar reformation achieved reliable full-length visualization of the ALL in 94% of cases. The described MPR technique can be applied easily and fast in clinical routine. It is a reliable tool to improve the assessment of the ALL.

Background: One of the values determined during the assessment of knee issues is the posterior tibial slope (PTS). A new option for measuring the PTS is the EOS 3D imaging system, which provides anteroposterior (AP) and lateral long leg radiographs (LLRs) using less radiation than a conventional LLR. We investigated the reliability of the EOS 3D imaging system with respect to PTS measurements., Methods: We retrospectively searched our radiological database for patients who underwent an EOS scan and a computed tomography (CT) scan of their lower extremities between January and December 2019. Fifty-six knees were included in the study. Medial and lateral PTSs were determined using both modalities. A radiologist and an orthopaedic surgeon each performed all measurements twice and the intraclass correlation (ICC) was calculated to assess inter- and intrarater reliability. The Student t test and Pearson correlation were used to compare the results of both imaging modalities., Results: The mean medial PTS was 8.5° (95% confidence interval [CI], 8.1-8.9°) for the EOS system and 7.7° (95% CI, 7.3-8.1°) for CT, and the lateral PTS was 7.4° (95% CI, 6.9-7.9°) for the EOS system, and 7.0° (95% CI, 6.5-7.4°) for CT. Interrater reliability (ICC) with respect to medial and lateral PTSs measured on the EOS (0.880, 0.765) and CT (0.884, 0.887) images was excellent. The intrarater reliability of reader 1 (ICC range, 0.889-0.986) and reader 2 (ICC range, 0.868-0.980) with respect to the same measurements was excellent., Conclusion: The PTS measurements from the EOS 3D imaging system are as reliable and reproducible as those from CT, the current gold standard method. We recommend using this system if possible, because it acquires more information (sagittal plane) in a scan than a conventional LLR, while exposing the patient to less radiation., Level of Evidence: Level III, Retrospective cohort study.

Objective: Vial coring describes the occurrence of small rubber particles, which are formed by needles when perforating vial stoppers. These particles may be aspirated along with the drug. Unconscious injection of rubber particles may increase the risks associated with intra-articular injections. This study aimed to analyze the frequency of this phenomenon and possibilities to avoid its occurrence., Method: 800 vials of 2 ​mL, filled with sodium chloride, were divided into 4 groups (n ​= ​200 each). Aspiration through the rubber stopper was performed with a 18-Gauge needle and the fluid was ejected onto a 10 ​μm filter paper through a 18-Gauge needle (group one) and a 23-Gauge needle (group two). In group three a 23-Gauge needle was used for aspiration and ejection. In group four, aspiration was performed using 18-Gauge needles with implemented 5 ​μm filters. Subsequently, a microscopic analysis of the filter papers was performed., Results: In none of the 800 specimen, a rubber particle was detected by naked eye. Microscopically, 20 (10%) rubber particles were detected in group one, 21 (11%) in group two and 65 (33%) in group three. In group four, no particles were visualized., Conclusion: This study shows the occurrence of rubber particles in 10-33% of the cases, when standard needles are used for the aspiration of drugs. We therefore recommend using industrially prefilled syringes, filter needles or removing the rubber stopper before withdrawing drugs from vials for intra-articular injections., Competing Interests: The authors, their immediate family, and any research foundation with which they are affiliated did not receive any financial payments or other benefits from any commercial entity related to the subject of this article. None of the authors has a conflict of interests., (© 2021 The Authors.)

Aims: The prevalence of combined abnormalities of femoral torsion (FT) and tibial torsion (TT) is unknown in patients with femoroacetabular impingement (FAI) and hip dysplasia. This study aimed to determine the prevalence of combined abnormalities of FT and TT, and which subgroups are associated with combined abnormalities of FT and TT., Methods: We retrospectively evaluated symptomatic patients with FAI or hip dysplasia with CT scans performed between September 2011 and September 2016. A total of 261 hips (174 patients) had a measurement of FT and TT. Their mean age was 31 years (SD 9), and 63% were female (165 hips). Patients were compared to an asymptomatic control group (48 hips, 27 patients) who had CT scans including femur and tibia available for analysis, which had been acquired for nonorthopaedic reasons. Comparisons were conducted using analysis of variance with Bonferroni correction., Results: In the overall study group, abnormal FT was present in 62% (163 hips). Abnormal TT was present in 42% (109 hips). Normal FT combined with normal TT was present in 21% (55 hips). The most frequent abnormal combination was increased FT combined with normal TT of 32% (84 hips). In the hip dysplasia group, 21% (11 hips) had increased FT combined with increased TT. The prevalence of abnormal FT varied significantly among the subgroups (p < 0.001). We found a significantly higher mean FT for hip dysplasia (31°; SD 15)° and valgus hips (42° (SD 12°)) compared with the control group (22° (SD 8°)). We found a significantly higher mean TT for hips with cam-type-FAI (34° (SD 6°)) and hip dysplasia (35° (SD 9°)) compared with the control group (28° (SD 8°)) (p < 0.001)., Conclusion: Patients with FAI had a high prevalence of combined abnormalities of FT and TT. For hip dysplasia, we found a significantly higher mean FT and TT, while 21% of patients (11 hips) had combined increased TT and increased FT (combined torsional malalignment). This is important when planning hip preserving surgery such as periacetabular osteomy and femoral derotation osteotomy. Cite this article: Bone Joint J 2020;102-B(12):1636-1645.

Purpose: Primary repair of the anterior cruciate ligament (ACL) is regaining popularity. Long-term results are lacking. The purpose of the current study was to determine the survival of the primarily repaired ACL after dynamic intraligamentary stabilization., Methods: Between 2011 and 2013, 57 patients with acute proximal ACL ruptures underwent DIS repair within 3 weeks from injury and were available for final follow-up at least 5 years postoperatively. Failure as an end point was defined as conversion to ACL reconstruction, failure to restore stability with persisting laxity side-to-side laxity of > 5 mm or a late-traumatic re-rupture or loss of stability. Kaplan-Meier survival analysis was performed., Results: Kaplan-Meier survival analysis demonstrated an overall survival of 70.0% (standard error SE 6.6%) at 74 months follow-up. Patients performing competitive sports prior to injury demonstrated an inferior long-term ACL survival of 56.4% (SE 11.6%). Patients performing recreational sport activities demonstrated a survival rate of 79.2% (SE 7.7%). The one factor demonstrating a direct influence on failure after adjustment was a high-pre-injury level of physical (odds ratio 4.0 confidence interval 1.0-15.8, p = 0.04)., Conclusion: The minimum 5 years survival rate after primary ACL repair using this technique was 70%. This value dropped to 56% in highly active patients performing competitive sports. Patients not suffering failure of repair demonstrated adequate restoration of knee laxity and high satisfaction. This study not only underlines the potential of ACL repair, but also highlights the danger of the procedure if strict patient selection is not appreciated., Level of Evidence: Level IV.

Purpose: The acetabular reinforcement ring with a hook (ARRH) has been designed for acetabular total hip arthroplasty (THA) revision. Additionally, the ARRH offers several advantages when used as a primary implant especially in cases with altered acetabular morphology. The implant facilitates anatomic positioning by placing the hook around the teardrop and provides a homogenous base for cementing the polyethylene cup. Therefore, the implant has been widely used in primary total hip arthroplasty at our institution. The present study reports the long-term outcome of the ARRH after a minimum follow-up of 20 years., Methods: Two hundred and ten patients with 240 primary THAs performed between April 1987 and December 1991 using the ARRH were retrospectively reviewed after a minimum follow-up of 20 years. Twenty-three of 240 hips were lost to follow-up, 110 patients with 124 THAs had deceased without having a revision surgery performed. This left 93 hips for final evaluation. Of those, 75 hips were assessed clinically and radiographically after a mean follow-up of 23.1 years (range 21.1-26.1 years). In 18 cases, clinical and radiographic assessment was omitted because implant revision had been performed prior to the follow-up investigation. The primary endpoint was defined as revision for aseptic loosening., Results: Out of the 93 hips available for final evaluation, 14 hips were revised for aseptic loosening; another four were revised for other reasons (deep infection n = 2, recurrent dislocation n = 2). The survival probability of the cup was 0.96 (95% confidence interval 0.93-0.99) after 20 years with aseptic loosening as endpoint. Radiographic analysis of the surviving 75 hips showed at least one sign of radiographic loosening in 24 hips. The mean Merle d'Aubigne score increased from 8 points pre-operatively to 15 points at final follow-up (7.5 ± 1.8 vs 15.0 ± 2.3, p < 0.001). The mean HHS was 85 ± 14 at final follow-up. Radiographic loosening did not correlate with the clinical outcome., Conclusions: The long-term results of the ARRH in primary THA are comparable to results with standard cemented cups and modern cementless cups. We believe that the ARRH is a versatile implant for primary THA, especially in cases with limited acetabular coverage and altered acetabular bone stock where the ARRH provides sufficient structural support for a cemented cup.

Purpose: Extra-abdominal desmoid tumours are benign and rare, and lead to a persistent treatment dilemma because of their high recurrence rate and their heterogeneous behaviour. The goal of this retrospective study was to evaluate the results of different treatment modalities for extra-abdominal desmoid tumours at four sarcoma treatment centres., Methods: The mean follow-up time for the 96 patients included in the study (63.5% female; mean age 38.9 years) was 8.4 years (2.0&ndash;40.5 years). The initial treatments were surgery (n = 44), surgery with radiation (n = 16), watchful waiting (n = 15), radiation only (n = 9), or systemic treatment (n = 12). Patient demographics, tumour sites, and the follow-up status of all patients were reviewed and evaluated for each of the treatment modalities., Results: The local recurrence rate was 45.5% in patients with primary surgical treatment and 37.5% following surgery combined with irradiation. Patients who were treated with radiation alone showed regressive (33.3%) or stable disease (66.6%). Systemic treatment alone resulted in disease progression in 41.7% of our patients. In the watchful waiting group, 73.3% showed stable disease, 20.0% showed spontaneous regression, and 6.7% showed progression after a mean follow-up of 4.1 years (2.0&ndash;11.5 years)., Conclusions: Our results suggest that a watchful waiting approach should be the first line treatment in asymptomatic desmoid tumours. However, radiation can help improve local control rates in patients who have undergone surgery. Progression and local recurrence rates following systemic treatment were comparable to those observed in surgery combined with radiation.

Background: Pelvic tumors are usually resected through the utilitarian pelvic incision, an extended ilioinguinal/iliofemoral approach. The pararectus approach, an intrapelvic anatomical approach with extraperitoneal access to the pelvis, has been established previously for the treatment of pelvic and acetabular fractures. However, it has not been used to address pelvic tumors. The study aimed at investigating the feasibility of this approach for pelvic tumor surgery and the possibilities of combining this approach with standard approaches to the hip joint., Methods: Thirteen patients that underwent pelvic tumor resections were retrospectively reviewed. Tumor resections were performed through the pararectus (n = 10) or extended pararectus approach (n = 3). In six of those cases, the pararectus approach was combined with extrapelvic approaches including the modified Gibson (n = 4), the Kocher-Langenbeck (n = 1), and the trochanteric flip approach (n = 1). The mean follow-up was 32.6 ± 9.1 months., Results: In all cases, the tumor resections were carried out according to the preoperative plan. In seven of 13 cases, wide resections were performed; six of 13 cases were planned close resections. Four cases of major complications were observed (vascular injury, deep infection, iliac vein thrombosis, total hip arthroplasty dislocation). Minor complications were observed in two cases. One tumor recurred locally. At the final follow-up, 10 patients were alive, eight of those without evidence of disease., Conclusion: The study demonstrated the suitability of the pararectus approach for pelvic tumor resections. The possibility to combine the approach with standard approaches to the hip joint allowed for single-stage reconstructions of the pelvis and the hip joint without sacrificing surgical margins and function. The pararectus approach is a versatile option adding to the established approaches for musculoskeletal tumor surgery of the pelvis.

Background: Prosthetic joint infection (PJI) is deemed to be the most serious complication following total hip arthroplasty. Obesity and smoking are known risk factors for PJI. However, the influence of these variables on infection free survival, of septic revision hip arthroplasty, is yet to be explored. The aim of this study was to determine the effect of obesity and smoking on the outcome of two-stage prosthetic exchange surgery., Patients and Methods: A consecutive series of 97 hips in 94 patients (69 male, 25 female, mean age 66±12 years), undergoing two-stage revision surgery for hip PJI, were investigated retrospectively, after a mean follow-up of 60 (24-170) months. Survival was estimated using Kaplan-Meyer curves. A multivariate cox-regression model was applied to test for the influence of smoking or obesity (BMI≥30) after adjusting 16 potential patient-dependant variables., Hypothesis: The study hypothesis was that smoking and high BMI are predictors for the failure of septic revision hip arthroplasty. Failure of septic revision hip arthroplasty was defined as failure to eradicate the infection or eradication of the infection but failure to preserve the arthroplasty., Results: Kaplan-Meier showed a cumulative survival proportion of 80.4%(standard error S.E 4%), of the definitive implant, at 5 years. Obese patients (BMI≥30) and smokers had a significantly lower 5-year survival of 60.9% (S.E 1%) and 50.6% (S.E 1.4%), respectively (p=0.001)., Discussion: Obesity and smoking are both factors determining infection free survival in two-stage revision hip arthroplasty. Clinicians should be aware of potential complications and anticipate a higher likelihood of conversion to a Girdlestone resection or even amputation in this group of patients., Level of Evidence: III, retrospective cohort study., (Copyright © 2019 Elsevier Masson SAS. All rights reserved.)

Background: Ultrasonography is a fast and patient-friendly modality to assess cartilage thickness. However, inconsistent results regarding accuracy have been reported. Therefore, we asked what are (1) the accuracy, (2) reproducibility, and (3) reliability of ultrasonographic cartilage thickness measurement using contrast-enhanced micro-CT for validation?, Methods: A series of 50 cartilage-bone plugs were harvested from fresh bovine and porcine joints. Ultrasonic cartilage thickness was determined using an A-mode, 20-MHz hand-held ultrasonic probe with native (1580 m/s) and adjusted speed of sound (1696 m/s). All measurements were performed by two observers at two different occasions. Angle of insonation was controlled by tilting the device and recording minimal thickness. Retrieval of exact location for measurement was facilitated by aligning the circular design of both cartilage-bone plug and ultrasonic device. There was no soft tissue interference between cartilage surface and ultrasonic probe. Ground truth measurement was performed using micro-CT with iodine contrast agent and a voxel size of 16 μm. The mean cartilage thickness was 1.383 ± 0.402 mm (range, 0.588-2.460 mm)., Results: Mean accuracy was 0.074 ± 0.061 mm (0.002-0.256 mm) for native and 0.093 ± 0.098 mm (0.000-0.401 mm) for adjusted speed of sound. Bland-Altman analysis showed no systematic error. High correlation was found for native and adjusted speed of sound with contrast-enhanced micro-CT (both r = 0.973; p < 0.001). A perfect agreement for reproducibility (intraclass correlation coefficient [ICC] 0.992 and 0.994) and reliability (ICC 0.993, 95% confidence interval 0.990-0.995) was found., Conclusions: Ultrasonic cartilage thickness measurement could be shown to be highly accurate, reliable, and reproducible. The A-mode ultrasonic cartilage thickness measurement is a fast and patient-friendly modality which can detect early joint degeneration and facilitate decision making in joint preserving surgery.

Low back pain is a prevalent socio-economic burden and is often associated with damaged or degenerated intervertebral discs (IVDs). When conservative therapy fails, removal of the IVD (discectomy), followed by intersomatic spinal fusion, is currently the standard practice in clinics. The remaining space is filled with an intersomatic device (cage) and with bone substitutes to achieve disc height compensation and bone fusion. As a complication, in up to 30% of cases, spinal non-fusions result in a painful pseudoarthrosis. Bone morphogenetic proteins (BMPs) have been clinically applied with varied outcomes. Several members of the BMP family, such as BMP2, BMP4, BMP6, BMP7, and BMP9, are known to induce osteogenesis. Questions remain on why hyper-physiological doses of BMPs do not show beneficial effects in certain patients. In this respect, BMP antagonists secreted by mesenchymal cells, which might interfere with or block the action of BMPs, have drawn research attention as possible targets for the enhancement of spinal fusion or the prevention of non-unions. Examples of these antagonists are noggin, gremlin1 and 2, chordin, follistatin, BMP3, and twisted gastrulation. In this review, we discuss current evidence of the osteogenic effects of several members of the BMP family on osteoblasts, IVD cells, and mesenchymal stromal cells. We consider in vitro and in vivo studies performed in human, mouse, rat, and rabbit related to BMP and BMP antagonists in the last two decades. We give insights into the effects that BMP have on the ossification of the spine. Furthermore, the benefits, pitfalls, and possible safety concerns using these cytokines for the improvement of spinal fusion are discussed., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Background: Large acetabular defects and pelvic discontinuity represent complex problems in revision total hip arthroplasty. This study aimed to investigate whether reconstruction with the Ganz reinforcement ring would provide durable function in large acetabular defects., Patients and Methods: 46 hips (45 patients, 19 male, 26 female, mean age 68 years) with AAOS type III and IV defects undergoing acetabular revision with the Ganz reinforcement ring were evaluated at a mean follow-up of 74 months (24-161 months). Fourteen patients died during follow-up. All surviving patients were available for clinical assessment and radiographic studies. Radiographs were evaluated for bone healing and component loosening. A Cox-regression model was performed to identify factors influencing survival of the Ganz-ring., Results: In the group of AAOS III defects, 3 of 26 acetabular reconstructions failed, all due to aseptic loosening. In pelvic discontinuity (AAOS IV), 9 of 20 hips failed due to aseptic loosening (n = 4), deep infection (n = 3), and non-union of the pelvic ring (n = 2). With acetabular revision for any reason as an endpoint, the estimated Kaplan-Meier 5-year survival was 86% in type III defects and 57% in type IV defects, respectively. The presence of pelvic discontinuity was identified as the only independent predictive factor for failure of the Ganz ring acetabular reconstruction (AAOS III vs. IV, Hazard ratio: 0.217, 95%, Confidence interval: 0.054-0.880, p = 0.032)., Conclusion: The Ganz reinforcement ring remains a favorable implant for combined segmental and cavitary defects. However, defects with pelvic discontinuity demonstrate high failure rates. The indications should therefore be narrowed to acetabular defects not associated with pelvic discontinuity.

Purpose: Prognosis of extraskeletal osteosarcoma (ESOS) is reported to be poorer than that of skeletal osteosarcoma. This multicenter retrospective study aimed to evaluate factors influencing ESOS prognosis., Patients and Methods: Members of the European Musculoskeletal Oncology Society (EMSOS) submitted institutional data on patients with ESOS., Results: Data from 274 patients treated from 1981 to 2014 were collected from 16 EMSOS centres; 266 patients were eligible. Fifty (18.7%) had metastases at diagnosis. Of 216 patients with localised disease, 211 (98%) underwent surgery (R0 = 70.6%, R1 = 27%). Five-year overall survival (OS) for all 266 patients was 47% (95% CI 40-54%). Five-year OS for metastatic patients was 27% (95% CI 13-41%). In the analysis restricted to the 211 localised patients who achieved complete remission after surgery 5-year OS was 51.4% (95% CI 44-59%) and 5-year disease-free survival (DFS) was 43% (95% CI 35-51%). One hundred twenty-one patients (57.3%) received adjuvant or neoadjuvant chemotherapy and 80 patients (37.9%) received radiotherapy. A favourable trend was seen for osteosarcoma-type chemotherapy versus soft tissue sarcoma-type (doxorubicin ± ifosfamide) regimens. For the 211 patients in complete remission after surgery, patient age, tumour size, margins and chemotherapy were positive prognostic factors for DFS and OS by univariate analysis. At multivariate analysis, patient age (≤40 years versus >40 years) (P = 0.05), tumour size (P = 0.0001) and receipt of chemotherapy (P = 0.006) were statistically significant prognostic factors for survival., Conclusion: Patient age and tumour size are factors influencing ESOS prognosis. Higher survival was observed in patients who received perioperative chemotherapy with a trend in favour of multiagent osteosarcoma-type regimen which included doxorubicin, ifosfamide and cisplatin., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Purpose: Pleomorphic rhabdomyosarcoma (RMS) represents a rare sarcoma subtype of the adult population. Due to its clinical characteristics, treatment is currently based on the guidelines for adult soft tissue sarcoma therapy. Hence, in the metastatic setting, doxorubicin-containing regimens are used in the sarcoma community, with limited treatment benefit. Scanty published data are available on the efficacy of systemic treatment. Whether treatment response and outcome of these patients could be improved by using pediatric protocols used typically in other RMS subtypes, like embryonal and alveolar RMS, is unclear. We report on an impressive effect of multiagent pediatric chemotherapy in an adult patient with metastatic pleomorphic RMS., Methods: We present the case of a 70-year-old man with metastatic pleomorphic RMS of his left thigh. Systemic chemotherapy according to the VAC regimen (vincristine, actinomycin, cyclophosphamide) was initiated. Follow-up clinical and radiologic assessment demonstrated an impressive treatment response., Results: Sixteen months after primary diagnosis, computed tomography scan shows no signs of tumor progression., Conclusions: Our case report emphasizes that multiagent systemic therapy according to pediatric protocols should be considered in adult patients with pleomorphic RMS.

Pelvic discontinuity is a complex problem in revision total hip arthroplasty. Although rare, the incidence is likely to increase due to the ageing population and the increasing number of total hip arthroplasties being performed. The various surgical options available to solve this problem include plating, massive allografts, reconstruction rings, custom triflanged components and tantalum implants. However, the optimal solution remains controversial. None of the known methods completely solves the major obstacles associated with this problem, such as restoration of massive bone loss, implant failure in the short- and long-term and high complication rates. This review discusses the diagnosis, decision making, and treatment options of pelvic discontinuity in revision total hip arthroplasty.

Objective: Intraarticular gadolinium-enhanced magnetic resonance arthrography (MRA) is commonly applied to characterize morphological disorders of the hip. However, the reproducibility of retrieving anatomic landmarks on MRA scans and their correlation with intraarticular pathologies is unknown. A precise mapping system for the exact localization of hip pathomorphologies with radial MRA sequences is lacking. Therefore, the purpose of the study was the establishment and validation of a reproducible mapping system for radial sequences of hip MRA., Materials and Methods: Sixty-nine consecutive intraarticular gadolinium-enhanced hip MRAs were evaluated. Radial sequencing consisted of 14 cuts orientated along the axis of the femoral neck. Three orthopedic surgeons read the radial sequences independently. Each MRI was read twice with a minimum interval of 7 days from the first reading. The intra- and inter-observer reliability of the mapping procedure was determined., Results: A clockwise system for hip MRA was established. The teardrop figure served to determine the 6 o'clock position of the acetabulum; the center of the greater trochanter served to determine the 12 o'clock position of the femoral head-neck junction. The intra- and inter-observer ICCs to retrieve the correct 6/12 o'clock positions were 0.906-0.996 and 0.978-0.988, respectively., Conclusions: The established mapping system for radial sequences of hip joint MRA is reproducible and easy to perform.

β-Tricalcium phosphate (β-TCP) ceramics are approved for the repair of osseous defects. In large defects, however, the substitution of the material by authentic bone is inadequate to provide sufficient long-term mechanical stability. We aimed to develop composites of β-TCP ceramics and receptor activator of nuclear factor κ-B ligand (RANKL) to enhance the formation of osteoclasts and promote cell mediated calcium phosphate resorption. RANKL was adsorbed superficially onto β-TCP ceramics or incorporated into a crystalline layer of calcium phosphate by the use of a co-precipitation technique. Murine osteoclast precursors were seeded onto the ceramics. After 15 days, the formation of osteoclasts was quantified cytologically and colorimetrically with tartrate-resistant acidic phosphatase (TRAP) staining and TRAP activity measurements, respectively. Additionally, the expression of transcripts encoding the osteoclast gene products cathepsin K, calcitonin receptor, and of the sodium/hydrogen exchanger NHA2 were quantified by real-time PCR. The activity of newly formed osteoclasts was evaluated by means of a calcium phosphate resorption assay. Superficially adsorbed RANKL did not induce the formation of osteoclasts on β-TCP ceramics. When co-precipitated onto β-TCP ceramics RANKL supported the formation of mature osteoclasts. The development of osteoclast lineage cells was further confirmed by the increased expression of cathepsin K, calcitonin receptor, and NHA2. Incorporated RANKL stimulated the cells to resorb crystalline calcium phosphate. Our in vitro study shows that RANKL incorporated into β-TCP ceramics induces the formation of active, resorbing osteoclasts on the material surface. Once formed, osteoclasts mediate the release of RANKL thereby perpetuating their differentiation and activation. In vivo, the stimulation of osteoclast-mediated resorption may contribute to a coordinated sequence of material resorption and bone formation. Further in vivo studies are needed to confirm the current in vitro findings., (Copyright © 2014 Elsevier Inc. All rights reserved.)

Study Design Case report. Objectives With only two previously reported cases, localized amyloidosis of the sacrum is extremely rare. Here we report a 64-year-old woman with a large osteolytic lesion accompanied by weakness and paresthesia of the right leg and difficulties in bladder control. Methods Fine needle biopsy and standard staging procedures revealed a primary solitary amyloidoma that was treated with intralesional resection, lumbopelvic stabilization, and consolidation radiotherapy. Results Clinical follow-up revealed the diagnosis of multiple myeloma 9 months after initial treatment. At 12 months, no local recurrence has occurred, the neurologic symptoms have resolved, and the systemic disease is in remission. Conclusions Intralesional resection with adjuvant radiotherapy of the amyloidoma achieved good local tumor control with limited morbidity.