Search

The article offers information on the efficiency of surgical approaches through optimal start points and trajectories for thoracic pedicle screw placement. It is revealed that the effective pedicle diameter and maximal insertional are directly related to trajectory and start point. An anatomic trajectory through the corresponding start points yields a larger bony channel for pedicle screw placement.

Iliac screw fixation is often used for long fusions to the sacropelvis. Maximum iliac screw purchase is obtained both by placing the screws within 1.5 cm of the greater sciatic notch and by extending them anterior to the axis of rotation in flexion-extension. Screw insertion is "blinded" or dependent on tactile feedback, and hence extreme care is necessary to avoid incorrect placement and damage to vital neurovascular structures in the pelvis and sciatic notch. Long screws may violate the hip joint while medial placement may injure the lumbosacral plexus and the nearby vessels. To explore the best intraoperative fluoroscopic method of determining optimal iliac screw placement, we used a synthetic pelvis model to investigate screw placement conditions: (1) optimal anatomic placement, (2) violation of the sciatic notch, (3) hip joint violation, (4) medial wall violation, and (5) lateral wall violation. Each condition was examined utilizing fluoroscopy with posteroanterior, inlet, outlet, lateral, iliac oblique, and obturator oblique Judet views to simulate operative conditions. These views were obtained to evaluate critical malposition of iliac screws. We found that, for a sciatic notch violation, the obturator oblique view best demonstrated the cortical breech, while for a hip joint violation, the inlet and outlet views were best. For a medial wall violation, the iliac oblique view best showed the violation. For a lateral wall violation, we were unable to demonstrate the cortical breech using these fluoroscopic views. Fluoroscopy is an effective method to determine sciatic notch, hip joint, and medial wall violations after iliac screw placement; however, it is not effective in identifying a lateral wall violation.

The effects of tibial malrotation on the biomechanics of the tibiotalar joint were studied using a cadaveric model loaded in an Instron 8521 materials testing device and a TEKScan I-Scan thin-film resistive ink pressure measuring system. Testing of 23 legs was performed using rotational conditions of 10 and 20 degrees internal and external rotation as well as neutral rotation. All rotational conditions were found to decrease joint contact area. Peak pressures were significantly greater with 20 degrees internal rotation as well as 20 degrees external rotation. Total load across the joint was significantly lower for both 10 and 20 degrees of external rotation. In conclusion, rotational deformity across the tibiotalar joint results in significant alteration of overall joint biomechanics and should be minimized whenever possible.