Search

Current legislations typically characterize systems of aerosols, such as from vehicle exhaust, primarily by number concentration and size distributions. While potential health threats have a dependence on the particle size, the chemical composition of particles, including the volatile and semi-volatile components adsorbed onto nonvolatile particle cores present at roadside and urban settings, is important in understanding the impact of exhaust particles on health. To date, the only tools suitable for an online in-depth chemical aerosol characterization are aerosol mass spectrometers, which are typically composed of complex and cost intensive instrumentation. We present a new analytical system, which combines a novel inexpensive infrared-radiation-based evaporation system (HELIOS) with a commercially available highly efficient atmospheric ionization source (SICRIT) connected to a rather low-price ion-trap mass spectrometer. Our inexpensive, robust and mobile aerosol characterization HELIOS/SICRIT/Mass Spectrometry system enables highly sensitive chemical analysis of particle-associated volatile substances. We validate the HELIOS/SICRIT/Mass Spectrometry system in laboratory experiments with coated particles generated under controlled conditions, and show that the system is capable of identification of combustion-generated polycyclic aromatic hydrocarbons and relative quantification of individual chemical species adsorbed on particle surfaces. We then employ our system to analyze real-world vehicle engine exhaust aerosol and show through time-resolved measurements with high time resolution (

Different configurations of photoacoustic (PA) setups for the online-measurement of gaseous N2O, employing semiconductor lasers at 2.9 and 4.5 μm, were developed and tested. Their performance was assessed with respect to the analysis of N2O emissions from wastewater treatment plants. For this purpose, the local N2O emissions of a wastewater treatment bioreactor was sampled by a dedicated mobile sampling device, and the total N2O emissions were analyzed in the gastight headspace of the bioreactor. We found that the use of a quantum-cascade laser emitting at about 4.53 μm, operated in a wavelength modulation mode, in combination with a conventional longitudinal PA cell yielded the highest sensitivity (

Kein anderes Merkmal ist so eindeutig mit dem Leistungsniveau einer Klasse verknüpft wie Klassenführung. In vorliegendem Artikel wird die Begriffserweiterung aufgezeigt, die Klassenführung über die Jahre erfahren hat. Mit dieser Perspektive auf die Entwicklung des Begriffes kann schließlich klar herausgearbeitet werden, was heute Klassenführung in der Praxis bedeutet. Überlegungen, wie Klassenführung in der Biographie einer Lehrkraft zu verorten ist, schließen sich an.

Matrix effects caused by Na and Al in the nitrogen Microwave-sustained, Inductively Coupled, Atmospheric-pressure Plasma (MICAP) were investigated. Easily ionizable elements, such as Na, can suppress or enhance the analyte signal; Al is shown here to produce a similar effect. The influence of these matrices was examined for 18 emission lines of 8 analyte atoms and ions having a wide range of excitation and ionization energies. The plasma operating conditions were fixed during all experiments at a total nitrogen flow of 19.4 L min−1 and a microwave power of 1.5 kW. An Fe solution was used to determine the excitation temperature of the plasma by the Boltzmann plot method at selected matrix concentrations. In addition, vertical emission profiles of the plasma were measured. The matrix effect becomes worse at higher concentrations of an easily ionizable element. The effect is caused not only by a shift in ionization equilibrium but also by a possible change in plasma ionization temperature. Correction methods to reduce the matrix effects were tested and are discussed.

Different configurations of photoacoustic (PA) setups for the online-measurement of gaseous N

Nitrous oxide (N

In single-pixel coded aperture terahertz-imaging, the individual pixel size in the spatial terahertz modulator is usually comparable to the terahertz wavelength in order to obtain a sufficient spatial image resolution. Therefore, diffraction plays an important role in the imaging process and must be accurately taken into account when the image is computationally retrieved. For this reason, we analyzed the impact of diffraction from the spatial terahertz modulator on the quality of the reconstructed image in single-pixel coded aperture imaging. We observed that the most important fraction of the image information is already contained in the zero order diffracted radiation. Higher diffraction orders do not contain enough information to retrieve the image from them solely, yet can contribute to an improved image quality when added to the zero order information.

Photochemistry taking place in atmospheric aerosol droplets has a significant impact on the Earth's climate. Nanofocusing of electromagnetic radiation inside aerosols plays a crucial role in their absorption behaviour, since the radiation flux inside the droplet strongly affects the activation rate of photochemically active species. However, size-dependent nanofocusing effects in the photokinetics of small aerosols have escaped direct observation due to the inability to measure absorption signatures from single droplets. Here we show that photoacoustic measurements on optically trapped single nanodroplets provide a direct, broadly applicable method to measure absorption with attolitre sensitivity. We demonstrate for a model aerosol that the photolysis is accelerated by an order of magnitude in the sub-micron to micron size range, compared with larger droplets. The versatility of our technique promises broad applicability to absorption studies of aerosol particles, such as atmospheric aerosols where quantitative photokinetic data are critical for climate predictions., Aerosol droplets have significant effects on atmospheric photochemistry, however measuring absorption from single droplets is a challenge. Here, the authors report a method to measure absorption of nanodroplets with attolitre sensitivity, showing rate enhancements for light focusing in photolysis reactions.

We present a fabrication method for flexible optically tunable terahertz metamaterial membranes based on thinning and embedding of commercially available silicon wafers in the metamaterial structure. The resulting membrane thickness of less than 25 mu m allows for quasi etalon-effect free devices which can be designed to show impedance matching to the surrounding air. We fabricated a thin film spectral bandpass filter with a maximal transmission of 85% and a modulation depth upon optical tuning of 98% at an operating frequency of 0.65THz. Further, we discussed the charge carrier dynamics and the requirements for optical tuning.

Efficient, high speed spatial modulators with predictable performance are a key element in any coded aperture terahertz imaging system. For spectroscopy, the modulators must also provide a broad modulation frequency range. In this study, we numerically analyze the electromagnetic behavior of a dynamically reconfigurable spatial terahertz wave modulator based on a micromirror grating in Littrow configuration. We show that such a modulator can modulate terahertz radiation over a wide frequency range from 1.7 THz to beyond 3 THz at a modulation depth of more than 0.6. As a specific example, we numerically simulated coded aperture imaging of an object with binary transmissive properties and successfully reconstructed the image.

We present a new fabrication technique for silicon-based optically tunable metamaterial membranes. The realized bandpass filter is only 25 μm thick, enabling quasi etalon-free performance. The maximal amplitude transmission of the filter was 80 %, and an amplitude modulation depth of 94 % was achieved at 0.65THz using a 500mW strong modulation laser.

No abstract available

We present a metamaterial-based sensor for use at terahertz (THz) frequencies that is suitable for the measurement of the thickness and the refractive index of a dielectric sample material. The sensor is designed to operate in reflection geometry in the frequency range between 1 THz and 1.6 THz. Deep-subwavelength sample thicknesses as small as 1/16000 of the operating wavelength can be resolved as well as refractive index differences of 0.01.

We present a metamaterial-based terahertz (THz) sensor for thickness measurements of subwavelength-thin materials and refractometry of liquids and liquid mixtures. The sensor operates in reflection geometry and exploits the frequency shift of a sharp Fano resonance minimum in the presence of dielectric materials. We obtained a minimum thickness resolution of 12.5 nm (1/16000 times the wavelength of the THz radiation) and a refractive index sensitivity of 0.43 THz per refractive index unit. We support the experimental results by an analytical model that describes the dependence of the resonance frequency on the sample material thickness and the refractive index., Comment: 10 pages, 5 figures

Conflict between clinical importance and statistical significance is an important problem in medical research. Although clinical importance is best described by asking for the effect size or how much, statistical significance can only suggest whether there is any difference. One way to combine statistical significance and effect sizes is to report confidence intervals. We therefore assessed the reporting of confidence intervals in the orthopaedic literature and factors influencing this frequency. In parallel, we tested the predictive value of statistical significance for effect size. In a random sample of predetermined size, we found one in five orthopaedic articles reported confidence intervals. Participation of an individual trained in research methods increased the odds of doing so fivefold. The use of confidence intervals was independent of impact factor, year of publication, and significance of outcomes. The probability of statistically significant results to predict at least a 10% between-group difference was only 69% (95% confidence interval, 55%–83%), suggesting that a high proportion of statistically significant results do not reflect large treatment effects. Confidence intervals could help avoid such erroneous interpretation by showing the effect size explicitly.