Search

The mammalian cell nucleus contains dozens of membrane-less nuclear bodies that play significant roles in various aspects of gene expression. Several nuclear bodies are nucleated by specific architectural noncoding RNAs (arcRNAs) acting as structural scaffolds. We have reported that a minor population of cellular RNAs exhibits an unusual semi-extractable feature upon using the conventional procedure of RNA preparation and that needle shearing or heating of cell lysates remarkably improves extraction of dozens of RNAs. Because semi-extractable RNAs, including known arcRNAs, commonly localize in nuclear bodies, this feature may be a hallmark of arcRNAs. Using the semi-extractability of RNA, we performed genome-wide screening of semi-extractable long noncoding RNAs to identify new candidate arcRNAs for arcRNA under hyperosmotic and heat stress conditions. After screening stress-inducible and semi-extractable RNAs, hundreds of readthrough downstream-of-gene (DoG) transcripts over several hundreds of kilobases, many of which were not detected among RNAs prepared by the conventional extraction procedure, were found to be stress-inducible and semi-extractable. We further characterized some of the abundant DoGs and found that stress-inducible transient extension of the 3′-UTR made DoGs semi-extractable. Furthermore, they were localized in distinct nuclear foci that were sensitive to 1,6-hexanediol. These data suggest that semi-extractable DoGs exhibit arcRNA-like features and our semi-extractable RNA-seq is a powerful tool to extensively monitor DoGs that are induced under specific physiological conditions.

Myeloid malignancies with DDX41 mutations are often associated with bone marrow failure and cytopenia before overt disease manifestation. However, the mechanisms underlying these specific conditions remain elusive. Here, we demonstrate that loss of DDX41 function impairs efficient RNA splicing, resulting in DNA replication stress with excess R-loop formation. Mechanistically, DDX41 binds to the 5ʹ splice site (5ʹSS) of coding RNA and coordinates RNA splicing and transcriptional elongation; loss of DDX41 prevents splicing-coupled transient pausing of RNA polymerase II at 5ʹSS, causing aberrant R-loop formation and transcription-replication collisions. Although the degree of DNA replication stress acquired in S phase is small, cells undergo mitosis with under-replicated DNA being remained, resulting in micronuclei formation and significant DNA damage, thus leading to impaired cell proliferation and genomic instability. These processes may be responsible for disease phenotypes associated with DDX41 mutations.

Long-read sequencers, such as Pacific Biosciences (PacBio) and Oxford Nanopore Technologies (ONT) sequencers, have improved their read length and accuracy, thereby opening up unprecedented research. Many tools and algorithms have been developed to analyze long reads, and rapid progress in PacBio and ONT has further accelerated their development. Together with the development of high-throughput sequencing technologies and their analysis tools, many read simulators have been developed and effectively utilized. PBSIM is one of the popular long-read simulators. In this study, we developed PBSIM3 with three new functions: error models for long reads, multi-pass sequencing for high-fidelity read simulation and transcriptome sequencing simulation. Therefore, PBSIM3 is now able to meet a wide range of long-read simulation requirements.

Recent technological advances have enabled the generation of large amounts of data consisting of RNA sequences and their functional activity. Here, we propose a method for extracting secondary structure features that affect the functional activity of RNA from sequence–activity data. Given pairs of RNA sequences and their corresponding bioactivity values, our method calculates position-specific structural features of the input RNA sequences, considering every possible secondary structure of each RNA. A Ridge regression model is trained using the structural features as feature vectors and the bioactivity values as response variables. Optimized model parameters indicate how secondary structure features affect bioactivity. We used our method to extract intramolecular structural features of bacterial translation initiation sites and self-cleaving ribozymes, and the intermolecular features between rRNAs and Shine–Dalgarno sequences and between U1 RNAs and splicing sites. We not only identified known structural features but also revealed more detailed insights into structure–activity relationships than previously reported. Importantly, the datasets we analyzed here were obtained from different experimental systems and differed in size, sequence length and similarity, and number of RNA molecules involved, demonstrating that our method is applicable to various types of data consisting of RNA sequences and bioactivity values.

Motivation Recent advances in high-throughput long-read sequencers, such as PacBio and Oxford Nanopore sequencers, produce longer reads with more errors than short-read sequencers. In addition to the high error rates of reads, non-uniformity of errors leads to difficulties in various downstream analyses using long reads. Many useful simulators, which characterize long-read error patterns and simulate them, have been developed. However, there is still room for improvement in the simulation of the non-uniformity of errors. Results To capture characteristics of errors in reads for long-read sequencers, here, we introduce a generative model for quality scores, in which a hidden Markov Model with a latest model selection method, called factorized information criteria, is utilized. We evaluated our developed simulator from various points, indicating that our simulator successfully simulates reads that are consistent with real reads. Availability and implementation The source codes of PBSIM2 are freely available from https://github.com/yukiteruono/pbsim2. Supplementary information Supplementary data are available at Bioinformatics online.

Can current simulations quantitatively predict the stability of ribonucleic acids (RNAs)? In this research, we apply a free-energy perturbation simulation of RNAs containing inosine, a modified ribonucleic base, to the derivation of RNA nearest-neighbor parameters. A parameter set derived solely from 30 simulations was used to predict the free-energy difference of the RNA duplex with a mean unbiased error of 0.70 kcal/mol, which is a level of accuracy comparable to that obtained with parameters derived from 25 experiments. We further show that the error can be lowered to 0.60 kcal/mol by combining the simulation-derived free-energy differences with experimentally measured differences. This protocol can be used as a versatile method for deriving nearest-neighbor parameters of RNAs with various modified bases.

Nuclear stress bodies (nSBs) are nuclear membraneless organelles formed around stress‐inducible HSATIII architectural long noncoding RNAs (lncRNAs). nSBs repress splicing of hundreds of introns during thermal stress recovery, which are partly regulated by CLK1 kinase phosphorylation of temperature‐dependent Ser/Arg‐rich splicing factors (SRSFs). Here, we report a distinct mechanism for this splicing repression through protein sequestration by nSBs. Comprehensive identification of RNA‐binding proteins revealed HSATIII association with proteins related to N(6)‐methyladenosine (m(6)A) RNA modification. 11% of the first adenosine in the repetitive HSATIII sequence were m(6)A‐modified. nSBs sequester the m(6)A writer complex to methylate HSATIII, leading to subsequent sequestration of the nuclear m(6)A reader, YTHDC1. Sequestration of these factors from the nucleoplasm represses m(6)A modification of pre‐mRNAs, leading to repression of m(6)A‐dependent splicing during stress recovery phase. Thus, nSBs serve as a common platform for regulation of temperature‐dependent splicing through dual mechanisms employing two distinct ribonucleoprotein modules with partially m(6)A‐modified architectural lncRNAs.

Motivation By detecting homology among RNAs, the probabilistic consideration of RNA structural alignments has improved the prediction accuracy of significant RNA prediction problems. Predicting an RNA consensus secondary structure from an RNA sequence alignment is a fundamental research objective because in the detection of conserved base-pairings among RNA homologs, predicting an RNA consensus secondary structure is more convenient than predicting an RNA structural alignment. Results We developed and implemented ConsAlifold, a dynamic programming-based method that predicts the consensus secondary structure of an RNA sequence alignment. ConsAlifold considers RNA structural alignments. ConsAlifold achieves moderate running time and the best prediction accuracy of RNA consensus secondary structures among available prediction methods. Availability and implementation ConsAlifold, data and Python scripts for generating both figures and tables are freely available at https://github.com/heartsh/consalifold. Supplementary information Supplementary data are available at Bioinformatics online.

Background Analysis of secondary structures is essential for understanding the functions of RNAs. Because RNA molecules thermally fluctuate, it is necessary to analyze the probability distributions of their secondary structures. Existing methods, however, are not applicable to long RNAs owing to their high computational complexity. Additionally, previous research has suffered from two numerical difficulties: overflow and significant numerical errors. Result In this research, we reduced the computational complexity of calculating the landscape of the probability distribution of secondary structures by introducing a maximum-span constraint. In addition, we resolved numerical computation problems through two techniques: extended logsumexp and accuracy-guaranteed numerical computation. We analyzed the stability of the secondary structures of 16S ribosomal RNAs at various temperatures without overflow. The results obtained are consistent with previous research on thermophilic bacteria, suggesting that our method is applicable in thermal stability analysis. Furthermore, we quantitatively assessed numerical stability using our method.. Conclusion These results demonstrate that the proposed method is applicable to long RNAs..

Motivation Split-alignments provide base-pair-resolution evidence of genomic rearrangements. In practice, they are found by first computing high-scoring local alignments, parts of which are then combined into a split-alignment. This approach is challenging when aligning a short read to a large and repetitive reference, as it tends to produce many spurious local alignments leading to ambiguities in identifying the correct split-alignment. This problem is further exacerbated by the fact that rearrangements tend to occur in repeat-rich regions. Results We propose a split-alignment technique that combats the issue of ambiguous alignments by combining information from probabilistic alignment with positional information from paired-end reads. We demonstrate that our method finds accurate split-alignments, and that this translates into improved performance of variant-calling tools that rely on split-alignments. Availability and implementation An open-source implementation is freely available at: https://bitbucket.org/splitpairedend/last-split-pe. Supplementary information Supplementary data are available at Bioinformatics online.

A number of long noncoding RNAs (lncRNAs) are induced in response to specific stresses to construct membrane-less nuclear bodies; however, their function remains poorly understood. Here, we report the role of nuclear stress bodies (nSBs) formed on highly repetitive satellite III (HSATIII) lncRNAs derived from primate-specific satellite III repeats upon thermal stress exposure. A transcriptomic analysis revealed that depletion of HSATIII lncRNAs, resulting in elimination of nSBs, promoted splicing of 533 retained introns during thermal stress recovery. A HSATIII-Comprehensive identification of RNA-binding proteins by mass spectrometry (ChIRP-MS) analysis identified multiple splicing factors in nSBs, including serine and arginine-rich pre-mRNA splicing factors (SRSFs), the phosphorylation states of which affect splicing patterns. SRSFs are rapidly de-phosphorylated upon thermal stress exposure. During stress recovery, CDC like kinase 1 (CLK1) was recruited to nSBs and accelerated the re-phosphorylation of SRSF9, thereby promoting target intron retention. Our findings suggest that HSATIII-dependent nSBs serve as a conditional platform for phosphorylation of SRSFs by CLK1 to promote the rapid adaptation of gene expression through intron retention following thermal stress exposure.

MicroRNAs (miRNAs) are small non-coding RNAs that play essential roles in the regulation of gene function by a mechanism known as RNA silencing. In a previous study, we revealed that miRNA-mediated silencing efficacy is correlated with the combinatorial thermodynamic properties of the miRNA seed–target mRNA duplex and the 5´-terminus of the miRNA duplex, which can be predicted using ‘miScore’. In this study, a robust refined-miScore was developed by integrating the thermodynamic properties of various miRNA secondary structures and the latest thermodynamic parameters of wobble base-pairing, including newly established parameters for I:C base pairing. Through repeated random sampling and machine learning, refined-miScore models calculated with either melting temperature (T(m)) or free energy change (ΔG) values were successfully built and validated in both wild-type and adenosine-to-inosine edited miRNAs. In addition to the previously reported contribution of the seed–target duplex and 5´-terminus region, the refined-miScore suggests that the central and 3´-terminus regions of the miRNA duplex also play a role in the thermodynamic regulation of miRNA-mediated silencing efficacy.

MotivationThe simultaneous optimization of the sequence alignment and secondary structures among RNAs, structural alignment, has been required for the more appropriate comparison of functional ncRNAs than sequence alignment. Pseudo-probabilities given RNA sequences on structural alignment have been desired for more-accurate secondary structures, sequence alignments, consensus secondary structures, and structural alignments. However, any algorithms have not been proposed for these pseudo-probabilities.ResultsWe invented the RNAfamProb algorithm, an algorithm for estimating these pseudo-probabilities. We performed the application of these pseudo-probabilities to two biological problems, the visualization with these pseudo-probabilities and maximum-expected-accuracy secondary-structure (estimation). The RNAfamProb program, an implementation of this algorithm, plus the NeoFold program, a maximum-expected-accuracy secondary-structure program with these pseudo-probabilities, demonstrated prediction accuracy better than three state-of-the-art programs of maximum-expected-accuracy secondary-structure while demanding running time far longer than these three programs as expected due to the intrinsic serious problem-complexity of structural alignment compared with independent secondary structure and sequence alignment. Both the RNAfamProb and NeoFold programs estimate matters more accurately with incorporating homologous-RNA sequences.AvailabilityThe source code of each of these two programs is available on each of “https://github.com/heartsh/rnafamprob” and “https://github.com/heartsh/neofold”.Contact“tagashira_masaki_17@stu-cbms.k.u-tokyo.ac.jp” and “asai@k.u-tokyo.ac.jp”.Supplementary informationSupplementary data are available at Bioinformatics online.

A number of long noncoding RNAs (lncRNAs) are induced in response to specific stresses to construct membrane-less nuclear bodies; however, their function remains poorly understood. Here, we report the role of nuclear stress bodies (nSBs) formed on highly repetitive satellite III (HSATIII) lncRNAs derived from primate-specific satellite III repeats upon thermal stress exposure. A transcriptomic analysis revealed that depletion of HSATIII lncRNAs, resulting in elimination of nSBs, promoted splicing of 533 retained introns during thermal stress recovery. A HSATIII-Comprehensive identification of RNA-binding proteins by mass spectrometry (ChIRP-MS) analysis identified multiple splicing factors in nSBs, including serine and arginine-rich pre-mRNA splicing factors (SRSFs), the phosphorylation states of which affect splicing patterns. SRSFs are rapidly dephosphorylated upon thermal stress exposure. During stress recovery, CDC like kinase 1 (CLK1) was recruited to nSBs and accelerated the re-phosphorylation of SRSF9, thereby promoting target intron retention. Our findings suggest that HSATIII-dependent nSBs serve as a conditional platform for phosphorylation of SRSFs by CLK1 to promote the rapid adaptation of gene expression through intron retention following thermal stress exposure.

It is important to determine the structures of RNA molecules to understand their functions. An RNA secondary structure, which is the set of complementary base pairs, is often modeled by the Boltzmann distribution of free energy and by stochastic context-free grammar. RNA secondary structures are predicted as structures with minimum free energy structures, which are the maximum likelihood estimators, or as structures with maximum expected accuracy structures. Point estimation of the RNA secondary structure is often unreliable, but marginal probabilities, such as base-pairing probabilities, are useful. Recently, high-throughput experimental methods have been implemented to identify RNA base pairs, and computational methods that utilize those experimental results in predicting RNA secondary structures have been developed. The common structure prediction and the prediction of the joint structures of interacting RNAs are computationally more difficult, but several methods are available to approximately solve them. Computation for RNA secondary structures usually utilizes dynamic programming, but stochastic sampling and integer programming are used for computationally expensive problems. Predicting three dimensional structures is challenging, but modeling of non-Watson-Click interactions and fragment assembly have been applied.

The secondary structures, as well as the nucleotide sequences, are the important features of RNA molecules to characterize their functions. According to the thermodynamic model, however, the probability of any secondary structure is very small. As a consequence, any tool to predict the secondary structures of RNAs has limited accuracy. On the other hand, there are a few tools to compensate the imperfect predictions by calculating and visualizing the secondary structural information from RNA sequences. It is desirable to obtain the rich information from those tools through a friendly interface. We implemented a web server of the tools to predict secondary structures and to calculate various structural features based on the energy models of secondary structures. By just giving an RNA sequence to the web server, the user can get the different types of solutions of the secondary structures, the marginal probabilities such as base-paring probabilities, loop probabilities and accessibilities of the local bases, the energy changes by arbitrary base mutations as well as the measures for validations of the predicted secondary structures. The web server is available at http://rtools.cbrc.jp, which integrates software tools, CentroidFold, CentroidHomfold, IPKnot, CapR, Raccess, Rchange and RintD.