Search

SUMMARYSeismotectonic interpretations in regions characterized by low to moderate seismicity require consistent earthquake catalogues covering periods of several decades. Inevitable changes in network configuration and analysing procedures, however, introduce significant bias to the hypocentre parameters and uncertainty estimates reported in such catalogues. To overcome these limitations, we developed a procedure using coupled hypocentre-velocity inversions to compute consistent hypocentre locations covering time periods of several decades while accounting for changes in network geometry. We apply these procedures to 35 yr of instrumentally recorded seismicity along the Rhône–Simplon fault system in southwest Switzerland, which is at the transition between the Central and Western Alps. The entire catalogue is relocated using a probabilistic location algorithm in combination with the derived minimum 1-D velocity models. A combination of location parameters is used to define consistent location-quality classes allowing for reliable interpretation of epicentres and focal depths. The relocated catalogue is interpreted together with a recent 3-D P-wave tomographic model and available 2-D reflection seismic profiles. The relocated hypocentres indicate that the major band of seismicity north of the Rhône valley is associated with a 30–40 km long, steeply north-dipping shear zone, which roots in the crystalline basement of the Aar Massif and extends to the shallowest levels of the sedimentary cover of the Helvetic nappes in the Rawil Depression. Seismicity towards the southwest indicates the existence of a similar shear zone within the Aiguille Rouge Massif. This zone possibly extends to the northeast and joins the Rawil fault zone. To the south of the Rhône valley, seismicity is scattered within the Penninic nappes, but limited to the hanging wall of the Pennine Basal Thrust (PBT). The Penninic nappes are characterized by a relatively higher VP of about 5 per cent compared to the Aar Massif, indicating differences in composition or metamorphic grade across the PBT.

Seismotectonic interpretations in regions characterized by low to moderate seismicity require consistent earthquake catalogues covering periods of several decades. Inevitable changes in network configuration and analysing procedures, however, introduce significant bias to the hypocentre parameters and uncertainty estimates reported in such catalogues. To overcome these limitations, we developed a procedure using coupled hypocentre-velocity inversions to compute consistent hypocentre locations covering time periods of several decades while accounting for changes in network geometry. We apply these procedures to 35 yr of instrumentally recorded seismicity along the Rhone-Simplon fault system in southwest Switzerland, which is at the transition between the Central and Western Alps. The entire catalogue is relocated using a probabilistic location algorithm in combination with the derived minimum 1-D velocity models. A combination of location parameters is used to define consistent location-quality classes allowing for reliable interpretation of epicentres and focal depths. The relocated catalogue is interpreted together with a recent 3-D P-wave tomographic model and available 2-D reflection seismic profiles. The relocated hypocentres indicate that the major band of seismicity north of the Rhone valley is associated with a 30-40 km long, steeply north-dipping shear zone, which roots in the crystalline basement of the Aar Massif and extends to the shallowest levels of the sedimentary cover of the Helvetic nappes in the Rawil Depression. Seismicity towards the southwest indicates the existence of a similar shear zone within the Aiguille Rouge Massif. This zone possibly extends to the northeast and joins the Rawil fault zone. To the south of the Rhone valley, seismicity is scattered within the Penninic nappes, but limited to the hanging wall of the Pennine Basal Thrust (PBT). The Penninic nappes are characterized by a relatively higher V-P of about 5 per cent compared to the Aar Massif, indicating differences in composition or metamorphic grade across the PBT., Geophysical Journal International, 232 (3), ISSN:0956-540X, ISSN:1365-246X

The stratigraphic development of foreland basins has mainly been related to surface loading in the adjacent orogens, whereas the control of slab loads on these basins has received much less attention. This has also been the case for interpreting the relationships between the Oligocene to Micoene evolution of the European Alps and the North Alpine foreland basin or Molasse basin. In this trough, periods of rapid subsidence have generally been considered as a response to the growth of the Alpine topography, and thus to the construction of larger surface loads. However, such views conflict with observations where the surface growth in the Alps has been partly decoupled from the subsidence history in the basin. In addition, surface loads alone are not capable of explaining the contrasts in the stratigraphic development particularly between its central and eastern portions. Here, we present an alternative view on the evolution of the Molasse basin. We focus on the time interval between c. 30 and 15 Ma and relate the basin-scale development of this trough to the subduction processes, and thus to the development of slab loads beneath the European Alps. At 30 Ma, the western and central portions of this basin experienced a change from deep marine underfilled (Flysch stage) to overfilled terrestrial conditions (Molasse stage). During this time, however, a deep marine Flysch-type environment prevailed in the eastern part of the basin. This was also the final sedimentary sink as sediment was routed along the topographic axis from the western/central to the eastern part of this trough. We interpret the change from basin underfill to overfill in the western and central basin as a response to oceanic lithosphere slab-breakoff beneath the Central and Western Alps. This is considered to have resulted in a growth of the Alpine topography in these portions of the Alps, an increase in surface erosion and an augmentation in sediment supply to the basin, and thus in the observed change from basin underfill to overfill. In the eastern part of the basin, however, underfilled Flysch-type conditions prevailed until 20 Ma, and subsidence rates were higher than in the western and central parts. We interpret that high subsidence rates in the eastern Molasse occurred in response to slab loads beneath the Eastern Alps, where the subducted oceanic slab remained attached to the European plate and downwarped the plate in the East. Accordingly, in the central and western parts, the growth of the Alpine topography, the increase in sediment flux and the change from basin underfill to overfill most likely reflect the response to slab delamination beneath the Central Alps. In contrast, in the eastern part, the possibly subdued topography in the Eastern Alps, the low sediment flux and the maintenance of a deep marine Flysch-type basin records a situation where the oceanic slab was still attached to the European plate. The situation changed at 20 Ma, when the eastern part of the basin chronicled a change from deep marine (underfilled) to shallow marine and then terrestrial (overfilled conditions). During the same time, subsidence rates in the eastern basin decreased, deformation at the Alpine front came to a halt and sediment supply to the basin increased possibly in response to a growth of the topography in the Eastern Alps. This was also the time when the sediment routing in the basin axis changed from an east-directed sediment dispersal prior to 20 Ma, to a west-oriented sediment transport thereafter and thus to the opposite direction. We relate these changes to the occurrence of oceanic slab breakoff beneath the Eastern Alps, which most likely resulted in a rebound of the plate, a growth of the topography in the Eastern Alps and a larger sediment flux to the eastern portion of the basin. Beneath the Central and Western Alps, however, the continental lithosphere slab remained attached to the European plate, thereby resulting in a continued downwarping of the plate in its central and western portions. This plate downwarping beneath the central and western Molasse together with the rebound of the foreland plate in the East possibly explains the inversion of the drainage direction. We thus propose that slab loads beneath the Alps were presumably the most important drivers for the development of the Molasse basin at the basin scale., Geosciences, 12 (6), ISSN:2076-3263

International audience; The tectonic evolution of the European Eastern Alps within the Alpine orogeny is still under debate. Open questions include: the link between surface, crustal and mantle structures; the nature of the Moho gap between the two plates; the relationship between the Alps, the adjacent foreland basin and the Bohemian Massif lithospheric blocks. We collected one year of continuous data recorded by ~250 broadband seismic stations –55 of which installed within the EASI AlpArray complementary experiment– in the Eastern Alpine region. Exploiting surface wave group velocity from seismic ambient noise, we obtained an high-resolution 3D S-wave crustal model of the area.The Rayleigh-wave group-velocity from 3 s to 35 s are inverted to obtain 2-D group velocity maps with a resolution of ~15 km. From these maps, we determine a set of 1D velocity models via a Neighborhood Algorithm, resulting in a new 3D model of S-wave velocity with associated uncertainties. The vertical parameterization is a 3-layer crust with the velocity properties in each layer described by a gradient. Our final model finds high correlation with specific geological features in the Eastern Alps up to 20 km depth, the deep structure of the Molasse basin and important variations of crustal thickness and velocities as a result of the Alpine orogeny post-collisional evolution. The strength of our new information relies on the absolute S-wave crustal velocity and the velocity gradient unambiguously sampled along the Moho, only limited by the amount and quality distribution of the data available.

The POLENET/LAPNET (Polar Earth Observing Network) broadband seismic network was deployed in northern Fennoscandia (Finland, Sweden, Norway, and Russia) during the third International Polar Year 2007–2009. The array consisted of roughly 60 seismic stations. In our study, we estimate the 3-D architecture of the upper mantle beneath the northern Fennoscandian Shield using high-resolution teleseismic P wave tomography. The P wave tomography method can complement previous studies in the area by efficiently mapping lateral velocity variations in the mantle. For this purpose 111 clearly recorded teleseismic events were selected and the data from the stations hand-picked and analysed. Our study reveals a highly heterogeneous lithospheric mantle beneath the northern Fennoscandian Shield though without any large high P wave velocity area that may indicate the presence of thick depleted lithospheric “keel”. The most significant feature seen in the velocity model is a large elongated negative velocity anomaly (up to −3.5%) in depth range 100–150km in the central part of our study area that can be followed down to a depth of 200km in some local areas. This low-velocity area separates three high-velocity regions corresponding to the cratonic units forming the area. ISSN:1869-9510 ISSN:1869-9529

AlpArray is a large collaborative seismological project in Europe that includes more than 50 research institutes and seismological observatories. At the heart of the project is the collection of top-quality seismological data from a dense network of broadband temporary seismic stations, in compliment to the existing permanent networks, that ensures a homogeneous station coverage of the greater Alpine region. This Alp Array Seismic Network (AASN) began operation in January 2016 and will have a duration of at least 2 years. In this work we report the Swiss contribution to the AASN, we concentrate on the site selection process, our methods for stations installation, data quality and data management. We deployed 27 temporary broadband stations equipped with STS-2 and Trillium Compact 120s sensors. The deployment and maintenance of the temporary stations across 5 countries is managed by ETH Zurich and it is the result of a fruitful collaboration between five institutes in Europe. ISSN:1680-7340 ISSN:1680-7359

We present a map illustrating the depth of the Moho discontinuity for the European Alpine collision zone compiled from two data sets covering the Western and the Eastern Alps, respectively. While extensive information on crustal structure and Moho depth in the area of the Western Alps has been gathered and presented in previous years, recent seismic refraction experiments focusing on the Eastern Alps now allow to establish a complete map of the Moho depth for the Alpine arc and its surroundings. Both data sets derive the Moho depth from seismic refraction and reflection data only, but use different methodological approaches to obtain an image of the Moho interface. In particular results from 2-D and 3-D methods feature different characteristics with regard to coverage and resolution. With a consistent methodology and quantitative error assignment we control that the two data sets meet the same quality criteria. In the newly compiled map the Moho is represented by the smoothest possible surface passing through the data and their error bars. Vertical offsets are introduced when the curvature of the surface exceeds a certain threshold, and boundaries between individual Moho fragments are defined along those vertical offsets. The image of the crust-mantle boundary in the Alpine collision zone allows for the interpretation of four crustal blocks, namely the European plate north of the Alpine Arc, the Ligurian plate in the southwest, the Adriatic microplate in the south and the and the Pannonian fragment at the southeastern edge of the Alps. The transition from the Adriatic Moho to the Pannonian Moho is of particular interest and is also discussed in another presentation.

AlpArray is a large collaborative seismological project in Europe that includes more than 50 research institutes and seismological observatories. At the heart of the project is the collection of top-quality seismological data from a dense network of broadband temporary seismic stations, in compliment to the existing permanent networks, that ensures a homogeneous station coverage of the greater Alpine region. This Alp Array Seismic Network (AASN) began operation in January 2016 and will have a duration of at least 2 years. In this work we report the Swiss contribution to the AASN, we concentrate on the site selection process, our methods for stations installation, data quality and data management. We deployed 27 temporary broadband stations equipped with STS-2 and Trillium Compact 120s sensors. The deployment and maintenance of the temporary stations across 5 countries is managed by ETH Zurich and it is the result of a fruitful collaboration between five institutes in Europe., Advances in Geosciences, 43, ISSN:1680-7340, ISSN:1680-7359

The POLENET/LAPNET (Polar Earth Observing Network) broadband seismic network was deployed in northern Fennoscandia (Finland, Sweden, Norway, and Russia) during the third International Polar Year 2007–2009. The array consisted of roughly 60 seismic stations. In our study, we estimate the 3-D architecture of the upper mantle beneath the northern Fennoscandian Shield using high-resolution teleseismic P wave tomography. The P wave tomography method can complement previous studies in the area by efficiently mapping lateral velocity variations in the mantle. For this purpose 111 clearly recorded teleseismic events were selected and the data from the stations hand-picked and analysed. Our study reveals a highly heterogeneous lithospheric mantle beneath the northern Fennoscandian Shield though without any large high P wave velocity area that may indicate the presence of thick depleted lithospheric “keel”. The most significant feature seen in the velocity model is a large elongated negative velocity anomaly (up to −3.5%) in depth range 100–150km in the central part of our study area that can be followed down to a depth of 200km in some local areas. This low-velocity area separates three high-velocity regions corresponding to the cratonic units forming the area., Solid Earth, 7 (2), ISSN:1869-9510, ISSN:1869-9529