Search

Assessing the position of the Bragg peak (BP) in hadron radiotherapy utilizing prompt-gamma imaging (PGI) presents many challenges in terms of detector physics. Gamma detectors with the capability of extracting the best energy, timing, and spatial information from each gamma interaction, as well as with high detection efficiency and count rate performance, are needed for this application. In this work we present the characterization of a pixel Čerenkov charge induction (CCI) thallium bromide (TlBr) detector in terms of energy and and electron drift time for its potential use in PGI. The CCI TlBr detector had dimensions of 4 × 4 × 5 mm3 and one of its electrodes was segmented in pixels with 1.7 mm pitch. A silicon photomultiplier (SiPM) was optically coupled to one of the faces of the TlBr slab to read out the Čerenkov light promptly emitted after the interaction of a gamma ray. The detector was operated stand-alone and the 1.275 prompt gammas from a 22Na radioactive source were used for the study. The electron drift time was obtained by combining the Čerenkov and charge induction signals and then used as a measure of the depth of interaction. The electron mobility in TlBr was estimated as ∼27 cm2 V-1 s-1. Energy resolutions between 3.4% and 4.0% at 1.275 MeV were obtained after depth-correction. These values improved to 3.0%-3.3% when events with drift times of 3-6 μs were selected. These results show the potential of pixel CCI TlBr detectors to resolve gamma interactions in the detector with mm-like accuracy in 3D and with excellent energy resolution. Previous studies with CCI TlBr devices have shown a timing resolution of

Thallium bromide (TlBr) is a semiconductor material and, simultaneously, a good Cerenkov radiator. The performance of a TlBr detector that integrates two different readouts, the charge induction readout and the detection of Cerenkov light, was evaluated. A TlBr detector with dimensions of 4  ×  4  ×  5 mm3, with a monolithic cathode and an anode segmented into strips, was manufactured. One of the bare and polished 4  ×  4 mm2 faces of the detector was coupled to a silicon photomultiplier (SiPM) to read out the Cerenkov light. Simultaneous timing and energy resolutions of

Thallium bromide (TlBr) is a promising semiconductor detector material for positron emission tomography (PET) because it can offer very good energy resolution and 3D segmentation capabilities, and it also provides detection efficiency surpassing that of commonly used scintillators. Energy, timing, and spatial resolution were measured for thin (

The feasibility of using Cerenkov light, generated by energetic electrons following 511 keV photon interactions in the semiconductor TlBr, to obtain fast timing information for positron emission tomography (PET) was evaluated. Due to its high refractive index, TlBr is a relatively good Cerenkov radiator and with its wide bandgap, has good optical transparency across most of the visible spectrum. Coupling an SiPM photodetector to a slab of TlBr (TlBr-SiPM) yielded a coincidence timing resolution of 620 ps FWHM between the TlBr-SiPM detector and a LFS reference detector. This value improved to 430 ps FWHM by applying a high pulse amplitude cut based on the TlBr-SiPM and reference detector signal amplitudes. These results are the best ever achieved with a semiconductor PET detector and already approach the performance required for time-of-flight. As TlBr has higher stopping power and better energy resolution than the conventional scintillation detectors currently used in PET scanners, a hybrid TlBr-SiPM detector with fast timing capability becomes an interesting option for further development.

Excellent spatial resolution is a requirement for preclinical PET imaging. In order to achieve spatial resolution of significantly better than one millimeter, an appealing possibility is to employ direct detector materials, such as cadmium telluride (CdTe). Prototype thin orthogonal strip detectors have been developed for testing. They have dimensions of 20 mm by 20 mm and are 0.5 mm thick, and have strips of 0.5 mm pitch on one side and 2.5 mm pitch on the other. Results are presented for the energy resolution (3% at 511 keV), intrinsic position resolution (equal to the 0.5 mm strip pitch), and timing resolution (3 ns FWHM in coincidence with an LSO detector, 8 ns HM for coincidence of two CdTe detectors) of the detectors. A PET scanner design is proposed using blocks made of the CdTe strip detectors, oriented in the blocks with their thin edges toward the center of the scanner. Simulation results suggest that this scanner, using a threshold of 250 keV, would have a sensitivity of 3.4% for a point source at its center. Index Terms--Cadmium telluride (CdTe), positron emission tomography (PET), small animal imaging.

Radiation Monitoring Devices, Inc., has recently investigated Cd(Zn)Te detector with three electrodes. Planar devices were refabricated as three-electrode devices after recording pulse height spectra. From the spectroscopy measurements at room temperature, photon energy resolutions of 8.3% and 3.5% FWHM were obtained, without noticeable loss of the detector efficiency, with the 'three-electrode detector' for gamma ray energies of 122 and 662 keV, respectively, while no discernable full energy peaks were apparent with the planar detectors. The full contact cathode was grounded while two different bias voltages were applied to each anode electrode, even though the induced signal was collected only from the center anode. By investigation of the real and weighting electric field of the detector, the possible reasons for the improved spectra with the three-electrode detector were determined. The strong real electric field around the two anodes very likely enhances the created charge velocity and results in increasing the possibility to induce full charge collection. From additional measurements with increased differences between two bias voltages applied to the anodes, the effects of the strong real electric field on the improved energy spectrum have been confirmed. Index Terms--Author, please supply your own keywords or send a blank e-mail to keywords@ieee.org to receive a list of suggested keywords.