Search

In this work, we investigated the effect of hole transporting poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) interfacing with Mn-doped CdS/ZnS quantum dots (QDs) deposited on an indium tin oxide (ITO) substrate on the photoemission of upconverted hot electrons under weak continuous wave photoexcitation in a vacuum. Among the various factors that can influence the photoemission of the upconverted hot electrons, we studied the role of PEDOT:PSS in facilitating the hole transfer from QDs and altering the energy of photoemitted hot electrons. Compared to hot electrons emitted from QDs deposited directly on the ITO substrate, the addition of the PEDOT:PSS layer between the QD and ITO layers increased the energy of the photoemitted hot electrons. The increased energy of the photoemitted hot electrons is attributed in part to the reduced steady-state positive charge on the QDs under continuous photoexcitation, which reduces the energy required to eject the electron from the conduction band. [ABSTRACT FROM AUTHOR]

Developing novel lead‐free ferroelectric materials is crucial for next‐generation microelectronic technologies that are energy efficient and environment friendly. However, materials discovery and property optimization are typically time‐consuming due to the limited throughput of traditional synthesis methods. In this work, we use a high‐throughput combinatorial synthesis approach to fabricate lead‐free ferroelectric superlattices and solid solutions of (Ba0.7Ca0.3)TiO3 (BCT) and Ba(Zr0.2Ti0.8)O3 (BZT) phases with continuous variation of composition and layer thickness. High‐resolution x‐ray diffraction (XRD) and analytical scanning transmission electron microscopy (STEM) demonstrate high film quality and well‐controlled compositional gradients. Ferroelectric and dielectric property measurements identify the "optimal property point" achieved at the composition of 48BZT–52BCT. Displacement vector maps reveal that ferroelectric domain sizes are tunable by varying {BCT–BZT}N superlattice geometry. This high‐throughput synthesis approach can be applied to many other material systems to expedite new materials discovery and properties optimization, allowing for the exploration of a large area of phase space within a single growth. [ABSTRACT FROM AUTHOR]

High‐quality quasi‐2D perovskites in a GaN nano‐wire matrix are grown to build a 3D hetero‐structure for high‐performance X‐ray sensing. In the 3D hetero‐structure, GaN nano‐wire matrix serves as an n‐type charge collector that can rapidly extract carriers through the bulk film of the perovskite layer. Together with a p‐type top electrode, a p–i–n diode with the 3D hetero‐structure is built, that exhibits a rectified current–voltage characteristic. After analyzing the interface energy alignment, it is found that the fermi levels of the perovskite and GaN are aligned in the dark, and a quasi‐fermi level splits upon illumination, introducing a built‐in electrical field at the interface. As a result, strong photo‐induced current is observed from the diode without an external field. Finally, the 3D diode for X‐ray detection demonstration is used, revealing a sensitivity of 308.9 µC Gyair−1 cm−2 at an exceptionally low applied field of 0.125 V µm−1. The X‐ray‐induced signal from the 3D diode is stable after 155 cycles of X‐ray irradiation under a constant electric field. This demonstration informs a new 3D architecture for high‐performance X‐ray sensing, and it shows that GaN is a robust n‐type interface for perovskite optoelectronic devices. [ABSTRACT FROM AUTHOR]

Gastritis, one of the most common gastrointestinal disorders, damages the stomach lining as it causes a disproportion between the protective and ruinous factors of the gastric system. Cabbage (CB) is widely used to treat gastric lesions but requires the addition of natural sweeteners to counteract its distinct bitter taste. Therefore, this study sought to determine whether the combination of chestnut honey (CH)—which is known for its dark brown color and high kynurenic acid (KA) content—or KA-increased CH (KACH) with CB (CH + CB or KACH + CB) exerts synergistic effects for improving both taste and efficacy. Before confirming the gastroprotective effects in indomethacin (INDO)-induced rats, the anti-inflammatory activities of CH + CB and KACH + CB were assessed in lipopolysaccharide (LPS)-stimulated RAW 264.7 macrophages. As a result, treatment with either CH + CB or KACH + CB downregulated pro-inflammatory cytokine levels in LPS-stimulated RAW 264.7 macrophages by regulating the translocation of nuclear factor kappa B. Furthermore, both CH + CB and KACH + CB not only enhanced the levels of antioxidant enzymes but also triggered the activation of nuclear factor erythroid-related factor 2. Based on these effects, CH + CB or KACH + CB effectively protected the gastric mucosa in INDO-induced rats. Therefore, this study suggests that CH + CB and KACH + CB exert stronger gastroprotective effects when used together. [ABSTRACT FROM AUTHOR]

2D hybrid organic–inorganic perovskites (HOIPs) are commonly found under subcritical cyclic stresses and suffer from fatigue issues during device operation. However, their fatigue properties remain unknown. Here, the fatigue behavior of (C4H9‐NH3)2(CH3NH3)2Pb3I10, the archetype 2D HOIP, is systematically investigated by atomic force microscopy (AFM). It is found that 2D HOIPs are much more fatigue resilient than polymers and can survive over 1 billion cycles. 2D HOIPs tend to exhibit brittle failure at high mean stress levels, but behave as ductile materials at low mean stress levels. These results suggest the presence of a plastic deformation mechanism in these ionic 2D HOIPs at low mean stress levels, which may contribute to the long fatigue lifetime, but is inhibited at higher mean stresses. The stiffness and strength of 2D HOIPs are gradually weakened under subcritical loading, potentially as a result of stress‐induced defect nucleation and accumulation. The cyclic loading component can further accelerate this process. The fatigue lifetime of 2D HOIPs can be extended by reducing the mean stress, stress amplitude, or increasing the thickness. These results can provide indispensable insights into designing and engineering 2D HOIPs and other hybrid organic–inorganic materials for long‐term mechanical durability. [ABSTRACT FROM AUTHOR]