Search

Future generation networks will accommodate a large amount of data traffic and lower latency. In order to meet these demands, it is essential to look over current spectral use or introduce new frequency bands. Introduction of new frequency bands requires a partial or complete change of already deployed infrastructure, which will have high operation expenditure and capital expenditure. It is more convenient to find other solutions by concentrating on device-related solutions. One of the solutions to achieve higher spectra efficiency is through device-to-device (D2D) communication. This paper presents and compares recent spectral efficiency techniques in 5G through D2D communication. The main focus is on the utilization of different techniques to improve spectrum efficiency. Furthermore, the challenges in interference management, resource utilization, power control, and mode selection of the proposed work are compared.

One of the major challenges in cybersecurity is the provision of an automated and effective cyber-threats detection technique. In this paper, we present an AI technique for cyber-threats detection, based on artificial neural networks. The proposed technique converts multitude of collected security events to individual event profiles and use a deep learning-based detection method for enhanced cyber-threat detection. For this work, we developed an AI-SIEM system based on a combination of event profiling for data preprocessing and different artificial neural network methods, including FCNN, CNN, and LSTM. The system focuses on discriminating between true positive and false positive alerts, thus helping security analysts to rapidly respond to cyber threats. All experiments in this study are performed by authors using two benchmark datasets (NSLKDD and CICIDS2017) and two datasets collected in the real world. To evaluate the performance comparison with existing methods, we conducted experiments using the five conventional machine-learning methods (SVM, k-NN, RF, NB, and DT). Consequently, the experimental results of this study ensure that our proposed methods are capable of being employed as learning-based models for network intrusion-detection, and show that although it is employed in the real world, the performance outperforms the conventional machine-learning methods.

In an automated steering system of the self-driving vehicles, the steering wheel angle is measured by the absolute angular displacement sensors or relative angle sensors. However, these sensors either encompass global navigation satellite systems (GNSS)/gyroscope – Micro Electromechanical-Sensor (MEMS) based solutions or comprise of the complex gear-based mechanical structure which results in latency and additive bias in the accumulative steering angle assessment. To address these issues, we propose a novel steering angle assessment system based on enhanced gear mechanism along with the adapted rotation paradigm for the customized self-driving vehicles. Additionally, a digital signal processing system has been introduced to resolve the issues in the identification of absolute central and max-bounding steering wheels position in self-driving vehicles. In assistance with the proposed mechanism, an algorithm has also been proposed to optimize the computed steering angle to minimalize the effect of additive bias in the accuracy. The proposed mechanism has been installed in the customized self-driving testbed vehicle and rigor validation has been performed in the straight and curvy road scenarios. Finally, the comparison study has been carried out between the conventional relative sensor and the proposed mechanism to show the accuracy and effectiveness of the proposed mechanism in terms of error rate, stability, and deviation.

The traditional big-data analytical approaches use data clustering as small buckets while providing distributed computation among different child nodes. These approaches bring the issues especially concerning network capacity, specialized tools and applications not capable of being trained in a short period. Furthermore, raw data generated through IoT forming big data comes with the capability of producing highly unstructured and heterogeneous form of data. Such form of data grows into challenging task for the real-time analytics. It is highly valuable to have computational values available locally instead of through distributed resources to reduce real-time analytical challenges. This paper proposes a fusion of three different data models like relational, semantical, and big data based data and metadata involving their issues and enhanced capabilities. A case study is used to represent data fusion in action from RDB to Resource Description Framework. Whereas, issues and their feasible solutions are also being discussed in this paper.

Smart devices, the carriers of a huge amount of private, sensitive and confidential data are pervasive in today's world with innovative and enhanced functionalities. Smartphones have brought tremendous change in people's lives with the launch of a new platform of communication and an ease of access to a wide range of applications. Due to the swift increase in the users of Android smartphones and the increasing demands based on advanced ease and features, developers are working hard to achieve the needful. Easy access to certain features and applications gave rise to the powerfulness and an efficacy of various threats, risks and vulnerabilities that can victimize users' private data residing in smartphone paradigm. With the developments and enhancements in malware, for Android-based smartphones, attacks continue to occur. In this paper, we investigate one of the possibly most destructive attacks for Android, that is, screenshot attack. We have developed “ScreenStealer”application and explored the vulnerabilities which make Android more inclined to risks and threats. Furthermore, we evaluated capture ratio of screenshots, resources consumption and execution time to determine effectiveness, efficiency and stealthiness of such a malicious application.

Due to the monumental growth of Internet applications in the last decade, the need for security of information network has increased manifolds. As a primary defense of network infrastructure, an intrusion detection system is expected to adapt to dynamically changing threat landscape. Many supervised and unsupervised techniques have been devised by researchers from the discipline of machine learning and data mining to achieve reliable detection of anomalies. Deep learning is an area of machine learning which applies neuron-like structure for learning tasks. Deep learning has profoundly changed the way we approach learning tasks by delivering monumental progress in different disciplines like speech processing, computer vision, and natural language processing to name a few. It is only relevant that this new technology must be investigated for information security applications. The aim of this paper is to investigate the suitability of deep learning approaches for anomaly-based intrusion detection system. For this research, we developed anomaly detection models based on different deep neural network structures, including convolutional neural networks, autoencoders, and recurrent neural networks. These deep models were trained on NSLKDD training data set and evaluated on both test data sets provided by NSLKDD, namely NSLKDDTest+ and NSLKDDTest21. All experiments in this paper are performed by authors on a GPU-based test bed. Conventional machine learning-based intrusion detection models were implemented using well-known classification techniques, including extreme learning machine, nearest neighbor, decision-tree, random-forest, support vector machine, naive-bays, and quadratic discriminant analysis. Both deep and conventional machine learning models were evaluated using well-known classification metrics, including receiver operating characteristics, area under curve, precision-recall curve, mean average precision and accuracy of classification. Experimental results of deep IDS models showed promising results for real-world application in anomaly detection systems.

The application of wireless body area network (WBAN) in health sector is crucial. It prolongs the life expectancy and improves the quality of life by enabling remote health monitoring. Despite many advantages, it may result and exacerbates various extant health issues especially in the context of mobile multimedia. Due to high data rate of mobile multimedia applications, heat generated from sensor devices is considerably high and results in thermal dissipation. The thermal impact of sensors on human body has largely been a neglected topic. The paper rigorously analyzes the specific absorption rate (SAR) impact on human body. Moreover, the paper largely contributes by comprehensively evaluating SAR impact under various circumstances and dependency factors. The analysis and evaluation show promising results that can significantly help the successful design and deployment of WBAN strategies. The paper also provides great guidance to numerous practitioners of this domain.

This paper proposes a new cluster-based on-demand routing protocol to support multihop communication in Bluetooth low energy ad hoc networks. The proposed scheme includes the topology configuration procedure, topology recovery scheme, and on-demand routing protocol. The topology configuration procedure consists of node discovery, piconet configuration, and scatternet formation in a randomly distributed environment. The proposed on-demand routing protocol is designed to minimize the number of route request messages by forwarding them to a master and relay nodes in each cluster during the route request procedure. The performance evaluation shows that our proposed scheme substantially reduces energy consumption, which is the most critical issue on energy constrained networks.

The concept of smart home is widely favored, as it enhances the lifestyle of the residents involving multiple disciplines, i.e., lighting, security, and much more. As the smart home networks continue to grow in size and complexity, it is essential to address a handful among the myriads of challenges related to data loss due to the interference and efficient energy management. In this paper, we propose a smart home control system using a coordinator-based ZigBee networking. The working of the proposed system is three fold: smart interference control system controls the interference caused due to the co-existence of IEEE 802.11x-based wireless local area networks and wireless sensor networks; smart energy control system is developed to integrate sunlight with light source and optimizes the energy consumption of the household appliances by controlling the unnecessary energy demands; and smart management control system to efficiently control the operating time of the electronic appliances. The performance of the proposed smart home is testified through computer simulation. Simulation results show that the proposed smart home system is less affected by the interference and efficient in reducing the energy consumption of the appliances used in a smart home.

Vehicular ad hoc network (VANET) is a special form of mobile ad hoc network (MANET), which plays a key role in the intelligent transportation system (ITS). Though many outstanding geographic routing protocols are designed for VANETs, a majority of them use parameters that only affect routing performance. In this article, we propose an intersection routing based on fuzzy multi-factor decision (IRFMFD), which utilizes several features. The scheme is divided into two parts, namely vehicular decision management and intersection decision management. In the vehicular component, candidate vehicles between two static nodes (SNs) located at two intersections derive potential routing paths considering distance, neighbor quantity, and relative velocity. In the intersection component, the candidate SN was chosen from the current intersection’s 2-hop neighbors which were connected with the current intersection by a route that was decided on in part one. To get the best scheme, we also introduced other factors to estimate the number of hops in each link and link lifetime. The simulation shows that the IRFMFD outperforms on delivery ratio and end-to-end delay compared with AODV (Ad hoc on-demand distance vector), GPSR (Greedy perimeter stateless routing) and GeOpps (Geographical opportunistic routing).

A smart home provides a facilitated environment for the detection of human activity with appropriate Deep Learning algorithms to manipulate data collected from numerous sensors attached to various smart things in a smart home environment. Human activities comprise expected and unexpected behavior events; therefore, detecting these events consisting of mutual dependent activities poses a key challenge in the activities detection paradigm. Besides, the battery-powered sensor ubiquitously and extensively monitors activities, disputes, and sensor energy depletion. Therefore, to address these challenges, we propose an Energy and Event Aware-Sensor Duty Cycling scheme. The proposed model predicts the future expected event using the Bi-Directional Long-Short Term Memory model and allocates Predictive Sensors to the predicted event. To detect the unexpected events, the proposed model localizes a Monitor Sensor within a cluster of Hibernate Sensors using the Jaccard Similarity Index. Finally, we optimize the performance of our proposed scheme by employing the Q-Learning algorithm to track the missed or undetected events. The simulation is executed against the conventional Machine Learning algorithms for the sensor duty cycle, scheduling to reduce the sensor energy consumption and improve the activity detection accuracy. The experimental evaluation of our proposed scheme shows significant improvement in activity detection accuracy from 94.12% to 96.12%. Besides, the effective rotation of the Monitor Sensor significantly improves the energy consumption of each sensor with the entire network lifetime.

Maintaining a fair use of energy consumption in smart homes with many household appliances requires sophisticated algorithms working together in real time. Similarly, choosing a proper schedule for appliances operation can be used to reduce inappropriate energy consumption. However, scheduling appliances always depend on the behavior of a smart home user. Thus, modeling human interaction with appliances is needed to design an efficient scheduling algorithm with real-time support. In this regard, we propose a scheduling algorithm based on human appliances interaction in smart homes using reinforcement learning (RL). The proposed scheduling algorithm divides the entire day into various states. In each state, the agents attached to household appliances perform various actions to obtain the highest reward. To adjust the discomfort which arises due to performing inappropriate action, the household appliances are categorized into three groups i.e., (1) adoptable, (2) un-adoptable, (3) manageable. Finally, the proposed system is tested for the energy consumption and discomfort level of the home user against our previous scheduling algorithm based on least slack time phenomenon. The proposed scheme outperforms the Least Slack Time (LST) based scheduling in context of energy consumption and discomfort level of the home user.

Survivors of either a hemorrhagic or ischemic stroke tend to acquire aphasia and experience spontaneous recovery during the first six months. Nevertheless, a considerable number of patients sustain aphasia and require speech and language therapy to overcome the difficulties. As a preliminary study, this article aims to distinguish aphasia caused from a temporoparietal lesion. Typically, temporal and parietal lesions cause Wernicke’s aphasia and Anomic aphasia. Differential diagnosis between Anomic and Wernicke’s has become controversial and subjective due to the close resemblance of Wernicke’s to Anomic aphasia when recovering. Hence, this article proposes a clinical diagnosis system that incorporates normal coupling between the acoustic frequencies of speech signals and the language ability of temporoparietal aphasias to delineate classification boundary lines. The proposed inspection system is a hybrid scheme consisting of automated components, such as confrontation naming, repetition, and a manual component, such as comprehension. The study was conducted involving 30 participants clinically diagnosed with temporoparietal aphasias after a stroke and 30 participants who had experienced a stroke without aphasia. The plausibility of accurate classification of Wernicke’s and Anomic aphasia was confirmed using the distinctive acoustic frequency profiles of selected controls. Accuracy of the proposed system and algorithm was confirmed by comparing the obtained diagnosis with the conventional manual diagnosis. Though this preliminary work distinguishes between Anomic and Wernicke’s aphasia, we can claim that the developed algorithm-based inspection model could be a worthwhile solution towards objective classification of other aphasia types.

Colossal amounts of unstructured multimedia data are generated in the modern Internet of Things (IoT) environment. Nowadays, deep learning (DL) techniques are utilized to extract useful information from the data that are generated constantly. Nevertheless, integrating DL methods with IoT devices is a challenging issue due to their restricted computational capacity. Although cloud computing solves this issue, it has some problems such as service delay and network congestion. Hence, fog computing has emerged as a breakthrough way to solve the problems of using cloud computing. In this article, we propose a strategy that assigns a portion of the DL layers to fog nodes in a fog-computing-based smart agriculture environment. The proposed deep learning entrusted to fog nodes (DLEFN) algorithm decides the optimal layers of DL model to execute on each fog node, considering their available computing capacity and bandwidth. The DLEFN individually calculates the optimal layers for each fog node with dissimilar computational capacities and bandwidth. In a similar experimental environment, comparison results clearly showed that proposed method accommodated more DL application than other existing assignment methods and utilized resources efficiently while reducing network congestion and processing burden on the cloud.

Vehicular ad hoc networks (VANETs) are the preferable choice for Intelligent Transportation Systems (ITS) because of its prevailing significance in both safety and nonsafety applications. Information dissemination in a multihop fashion along with privacy preservation of source node is a serious but challenging issue. We have used the idea of the phantom node as the next forwarder for data dissemination. The phantom node (vehicle) hides the identity of actual source node thus preserving the location privacy. The selection of the phantom node among the set of alternatives’ candidate vehicles is considered as a multicriteria-based problem. The phantom node selection problem is solved by using an analytical network process (ANP) by considering different traffic scenarios. The selection is based on different parameters which are distance, speed, trust, acceleration, and direction. The best alternative (target phantom vehicle) is selected through an ANP where all the alternatives are ranked from best to worst. The vehicle having maximum weight is considered to be the best choice as a phantom node. In order to check the stability of the alternatives’ ranking, sensitivity analysis is performed by taking into account different traffic scenarios and interest level of candidate vehicles.

Bluetooth Low Energy (BLE) is a short-range wireless communication technology aiming at low-cost and low-power communication. The performance evaluation of classical Bluetooth device discovery have been intensively studied using analytical modeling and simulative methods, but these techniques are not applicable to BLE, since BLE has a fundamental change in the design of the discovery mechanism, including the usage of three advertising channels. Recently, there several works have analyzed the topic of BLE device discovery, but these studies are still far from thorough. It is thus necessary to develop a new, accurate model for the BLE discovery process. In particular, the wide range settings of the parameters introduce lots of potential for BLE devices to customize their discovery performance. This motivates our study of modeling the BLE discovery process and performing intensive simulation. This paper is focused on building an analytical model to investigate the discovery probability, as well as the expected discovery latency, which are then validated via extensive experiments. Our analysis considers both continuous and discontinuous scanning modes. We analyze the sensitivity of these performance metrics to parameter settings to quantitatively examine to what extent parameters influence the performance metric of the discovery processes.

The Internet of Things (IoT), inspired by the tremendous growth of connected heterogeneous devices, has pioneered the notion of smart city. Various components, i.e., smart transportation, smart community, smart healthcare, smart grid, etc. which are integrated within smart city architecture aims to enrich the quality of life (QoL) of urban citizens. However, real-time processing requirements and exponential data growth withhold smart city realization. Therefore, herein we propose a Big Data analytics (BDA)-embedded experimental architecture for smart cities. Two major aspects are served by the BDA-embedded smart city. Firstly, it facilitates exploitation of urban Big Data (UBD) in planning, designing, and maintaining smart cities. Secondly, it occupies BDA to manage and process voluminous UBD to enhance the quality of urban services. Three tiers of the proposed architecture are liable for data aggregation, real-time data management, and service provisioning. Moreover, offline and online data processing tasks are further expedited by integrating data normalizing and data filtering techniques to the proposed work. By analyzing authenticated datasets, we obtained the threshold values required for urban planning and city operation management. Performance metrics in terms of online and offline data processing for the proposed dual-node Hadoop cluster is obtained using aforementioned authentic datasets. Throughput and processing time analysis performed with regard to existing works guarantee the performance superiority of the proposed work. Hence, we can claim the applicability and reliability of implementing proposed BDA-embedded smart city architecture in the real world.

The emergence of smart devices and smart appliances has highly favored the realization of the smart home concept. Modern smart home systems handle a wide range of user requirements. Energy management and energy conservation are in the spotlight when deploying sophisticated smart homes. However, the performance of energy management systems is highly influenced by user behaviors and adopted energy management approaches. Appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption. Hence, we propose a smart home energy management system that reduces unnecessary energy consumption by integrating an automated switching off system with load balancing and appliance scheduling algorithm. The load balancing scheme acts according to defined constraints such that the cumulative energy consumption of the household is managed below the defined maximum threshold. The scheduling of appliances adheres to the least slack time (LST) algorithm while considering user comfort during scheduling. The performance of the proposed scheme has been evaluated against an existing energy management scheme through computer simulation. The simulation results have revealed a significant improvement gained through the proposed LST-based energy management scheme in terms of cost of energy, along with reduced domestic energy consumption facilitated by an automated switching off mechanism.

The IEEE 802.15.4 standard is a rapidly growing technology for short-range communications and low rate Wireless personal area networking. The standard has been widely accepted as the de facto standard for wireless sensor network (WSN) because of its low cost deployment and remarkable applications. The mobility management in the existing WSN has highly suffered from different issues like high packet loss and delay because the current mobility management in IEEE 802.15.4 lacks the support of handover management for real-time streaming applications. In this paper, we propose a new fast handoff mechanism which eradicates the scanning delay. The proposed scheme uses the information of link quality (LQ) of the neighboring coordinators (COs), and on the basis of this information it selects an appropriate CO for handoff. The proposed scheme is evaluated through extensive simulations which show its strength and accuracy in the context of switching of high streaming data from one CO to another.

The Web of Things (WoT) plays an important role in the representation of the objects connected to the Internet of Things in a more transparent and effective way. Thus, it enables seamless and ubiquitous web communication between users and the smart things. Considering the importance of WoT, we propose a WoT-based emerging sensor network (WoT-ESN), which collects data from sensors, routes sensor data to the web, and integrate smart things into the web employing a representational state transfer (REST) architecture. A smart home scenario is introduced to evaluate the proposed WoT-ESN architecture. The smart home scenario is tested through computer simulation of the energy consumption of various household appliances, device discovery, and response time performance. The simulation results show that the proposed scheme significantly optimizes the energy consumption of the household appliances and the response time of the appliances.

Uninterrupted internet services are need of the day and their demand will increase in future by manifold. However, providing uninterrupted services under heterogeneous networks environment is a challenging task. One of the major challenges in this regard is the management of handover system between various networks. This paper proposes a handover management scheme by dividing the total coverage area of the base station (BS) or access point (AP) into three different zones (strong, average, and weak zones), respectively, on the basis of receive signal strength indication (RSSI) to provide fast vertical handover support in heterogeneous wireless networks. Furthermore, a new event is proposed and added to the IEEE 802.21: media independent handover (MIH) standard to integrate the functionality of multithreshold. The proposed scheme is implemented in NS2 and it is shown that our scheme provides a superior performance over the previous methods used for similar purposes.

In Cognitive Radio sensor networks, a pair of Cognitive Radio (CR) users wishing to communicate should first agree on a specific channel called control channel. Communication rendezvous is used to establish a control channel between CR users. Channel Hopping (CH) protocol is a sequence-based approach that provides an effective method for implementing rendezvous without relying on a Common Control Channel (CCC). In this approach, all CR users hop to the same rendezvous channel and hence this channel will serve as a control channel between them. In this paper, we propose two Channel Hopping Sequences (CHS) to establish a link in CR sensor networks with and without the assumption of global clock synchronization. Our schemes provide successful communication rendezvous within a bounded time interval. Theoretical analysis and simulation results showed that both schemes outperform the existing schemes used for similar purpose in terms of many performance criteria.

Two or more nodes need to establish a link on an available channel in a cognitive radio (CR) sensor network when they want to transmit data. Rendezvous is the process by which the nodes explore the available channels to establish a link when they want to communicate with each other. The method of finding a common channel is a challenging problem. A dedicated common control channel simplifies the rendezvous process, but it may create a single point of failure. In this paper, we propose a hopping sequence algorithm to provide an effective method to implement a rendezvous without relying on a dedicated control channel. Our scheme achieves a successful rendezvous within a single period in a CR sensor network. Analytical and simulation results show that our proposed scheme outperforms the existing schemes in terms of time to rendezvous, fairness, degree of overlapping, and the effect by primary user appearance.