Search

Despite substantial efforts, no effective treatment has been discovered for severe acute respiratory syndrome-coronavirus 2 (SARS-CoV-2) infection. Therefore, vaccination to reach herd immunity is the ultimate solution to control the coronavirus disease 2019 (COVID-19) pandemic. This study aimed to evaluate the potency, toxicity, and protection of candidate PastoCoAd vaccines as novel mix and match of recombinant adenovirus type 5 (rAd5) containing the full-length spike protein (rAd5-S), rAd5 containing the receptor-binding domain of S protein and nucleoprotein (rAd5 RBD-N), and SOBERANA dimeric RBD protein of SARS-CoV-2. Three vaccine candidates were developed against SARS-CoV-2 using adenoviral vectors, including the prime-boost (rAd5-S/rAd5 RBD-N), heterologous prime-boost (rAd5-S/ SOBERANA vaccine), and prime only (mixture of rAd5-S and rAd5 RBD-N). The rAd5-S and rAd5 RBD-N were produced with a Cytomegalovirus promoter and the human tissue plasminogen activator (tPA) leader sequence. The immunogenicity of vaccine candidates was also evaluated in mouse, rabbit, and hamster models and protection was evaluated in a hamster model. Following the injection of vaccine candidates, no significant toxicity was observed in the tissues of animal models. The immunogenicity studies of mice, rabbits, and hamsters showed that responses of total IgG antibodies were significantly higher with the prime-only and heterologous prime-boost vaccines as compared to the other groups (P < 0.009). Virus neutralizing antibodies were detected, and the level of cytokines related to humoral and cellular immunity increased significantly in all vaccinated models. A high cellular immunity response was found in the vaccinated groups compared to the controls. On the other hand, the vaccine challenge test showed that the virus titers significantly decreased in the pharynx and lung tissues of vaccinated hamsters compared to the control group. These successful findings suggest the safety and protection produced by the heterologous prime-boost vaccine (adenovector/ SOBERANA RBD), as well as a single dose of adenovector vaccine in animal models., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Objective: The aim of this study was to introduce a gelatin/bovine serum albumin (BSA) tissue standard, which provides dissolution properties identical to those of biological tissues. Further, the study evaluated whether the utilization of endodontic activating devices led to enhanced phantom dissolution rates., Materials and Methods: Bovine pulp tissue was obtained to determine a benchmark of tissue dissolution. The surface area and mass of samples were held constant while the ratio of gelatin and BSA were varied, ranging from 7.5% to 10% gelatin and 5% BSA. Each sample was placed in an individual test tube that was filled with an appropriate sodium hypochlorite solution for 1, 3, and 5 minutes, and then removed from the solution, blotted dry, and weighed again. The remaining tissue was calculated as the percent of initial tissue to determine the tissue dissolution rate. A radiopaque agent (sodium diatrizoate) and a fluorescent dye (methylene blue) were added to the phantom to allow easy quantification of phantom dissolution in a canal block model when activated using ultrasonic (EndoUltra) or sonic (EndoActivator) energy., Results: The 9% gelatin + 5% BSA phantom showed statistically equivalent dissolution to bovine pulp tissue at all time intervals. Furthermore, the EndoUltra yielded significantly more phantom dissolution in the canal block than the EndoActivator or syringe irrigation., Conclusions: Our phantom is comparable to biological tissue in terms of tissue dissolution and could be utilized for in vitro tests due to its injectability and detectability., Competing Interests: Conflict of Interest: No potential conflict of interest relevant to this article was reported., (Copyright © 2020. The Korean Academy of Conservative Dentistry.)

3D dual porosity protein-based scaffolds have been developed using the combination of foaming and freeze-drying. The suggested approach leads to the production of large, highly porous scaffolds with negligible shrinkage and deformation compared to the conventional freeze-drying method. Scanning electron microscopy, standard histological processing and mercury intrusion porosimetry confirmed the formation of a dual network in the form of big primary pores (243 ± 14 µm) embracing smaller secondary pores (42 ± 3 µm) opened onto their surface, resembling a vascular network. High interconnectivity of the pores, confirmed by micro-CT, is shown to improve diffusion kinetics and support a relatively uniform distribution of isolated human dental pulp stem cells within the scaffold compared to conventional scaffolds. Dual network scaffolds indicate more than three times as high cell proliferation capability as conventional scaffolds in 14 days.

Recent advances in three-dimensional printing technology have led to a rapid expansion of its applications in tissue engineering. The present study was designed to develop and characterize an in vitro multi-layered human alveolar bone, based on a 3D printed scaffold, combined with tissue engineered oral mucosal model. The objective was to incorporate oral squamous cell carcinoma (OSCC) cell line spheroids to the 3D model at different anatomical levels to represent different stages of oral cancer. Histological evaluation of the 3D tissue model revealed a tri-layered structure consisting of distinct epithelial, connective tissue, and bone layers; replicating normal oral tissue architecture. The mucosal part showed a well-differentiated stratified oral squamous epithelium similar to that of the native tissue counterpart, as demonstrated by immunohistochemistry for cytokeratin 13 and 14. Histological assessment of the cancerous models demonstrated OSCC spheroids at three depths including supra-epithelial level, sub-epithelial level, and deep in the connective tissue-bone interface. The 3D tissue engineered composite model closely simulated the native oral hard and soft tissues and has the potential to be used as a valuable in vitro model for the investigation of bone invasion of oral cancer and for the evaluation of novel diagnostic or therapeutic approaches to manage OSCC in the future., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Objective: A systematic characterization of hybrid scaffolds, fabricated based on combinatorial additive manufacturing technique and freeze-drying method, is presented as a new platform for osteoblastic differentiation of dental pulp cells (DPCs)., Methods: The scaffolds were consisted of a collagenous matrix embedded in a 3D-printed beta-tricalcium phosphate (β-TCP) as the mineral phase. The developed construct design was intended to achieve mechanical robustness owing to 3D-printed β-TCP scaffold, and biologically active 3D cell culture matrix pertaining to the Collagen extracellular matrix. The β-TCP precursor formulations were investigated for their flow-ability at various temperatures, which optimized for fabrication of 3D printed scaffolds with interconnected porosity. The hybrid constructs were characterized by 3D laser scanning microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and compressive strength testing., Results: The in vitro characterization of scaffolds revealed that the hybrid β-TCP/Collagen constructs offer superior DPCs proliferation and alkaline phosphatase (ALP) activity compared to the 3D-printed β-TCP scaffold over three weeks. Moreover, it was found that the incorporation of TCP into the Collagen matrix improves the ALP activity., Significance: The presented results converge to suggest the developed 3D-printed β-TCP/Collagen hybrid constructs as a new platform for osteoblastic differentiation of DPCs for craniomaxillofacial bone regeneration., (Copyright © 2017. Published by Elsevier Ltd.)

The aim of this research was to develop chitosan/gelatin/keratin composite containing hydrocortisone sodium succinate as a buccal mucoadhesive patch to treat desquamative gingivitis, which was fabricated through an environmental friendly process. Mucoadhesive films increase the advantage of higher efficiency and drug localization in the affected region. In this research, mucoadhesive films, for the release of hydrocortisone sodium succinate, were prepared using different ratios of chitosan, gelatin and keratin. In the first step, chitosan and gelatin proportions were optimized after evaluating the mechanical properties, swelling capacity, water uptake, stability, and biodegradation of the films. Then, keratin was added at different percentages to the optimum composite of chitosan and gelatin together with the drug. The results of surface pH showed that none of the samples were harmful to the buccal cavity. FTIR analysis confirmed the influence of keratin on the structure of the composite. The presence of a higher amount of keratin in the composite films resulted in high mechanical, mucoadhesive properties and stability, low water uptake and biodegradation in phosphate buffer saline (pH = 7.4) containing 10 4  U/ml lysozyme. The release profile of the films ascertained that keratin is a rate controller in the release of the hydrocortisone sodium succinate. Finally, chitosan/gelatin/keratin composite containing hydrocortisone sodium succinate can be employed in dental applications.

Tissue regeneration is rapidly evolving to treat anomalies in the entire human body. The production of biodegradable, customizable scaffolds to achieve this clinical aim is dependent on the interdisciplinary collaboration among clinicians, bioengineers and materials scientists. While bone grafts and varying reconstructive procedures have been traditionally used for maxillofacial defects, the goal of this review is to provide insight on all materials involved in the progressing utilization of the tissue engineering approach to yield successful treatment outcomes for both hard and soft tissues. In vitro and in vivo studies that have demonstrated the restoration of bone and cartilage tissue with different scaffold material types, stem cells and growth factors show promise in regenerative treatment interventions for maxillofacial defects. The repair of the temporomandibular joint (TMJ) disc and mandibular bone were discussed extensively in the report, supported by evidence of regeneration of the same tissue types in different medical capacities. Furthermore, in addition to the thorough explanation of polymeric, ceramic, and composite scaffolds, this review includes the application of biodegradable metallic scaffolds for regeneration of hard tissue. The purpose of compiling all the relevant information in this review is to lay the foundation for future investigation in materials used in scaffold synthesis in the realm of oral and maxillofacial surgery., (Copyright © 2016 Elsevier B.V. All rights reserved.)

In this research, the three dimensional porous scaffolds made of a polycaprolactone (PCL) microsphere/TiO 2 nanotube (TNT) composite was fabricated and evaluated for potential bone substitute applications. We used a microsphere sintering method to produce three dimensional PCL microsphere/TNT composite scaffolds. The mechanical properties of composite scaffolds were regulated by varying parameters, such as sintering time, microsphere diameter range size and PCL/TNT ratio. The obtained results ascertained that the PCL/TNT (0.5wt%) scaffold sintered at 60°C for 90min had the most optimal mechanical properties and an appropriate pore structure for bone tissue engineering applications. The average pore size and total porosity percentage increased after increasing the microsphere diameter range for PCL and PCL/TNT (0.5wt%) scaffolds. The degradation rate was relatively high in PCL/TNT (0.5wt%) composites compared to pure PCL when the samples were placed in the simulated body fluid (SBF) for 6weeks. Also, the compressive strength and modulus of PCL and PCL/TNT (0.5wt%) composite scaffolds decreased during the 6weeks of storage in SBF. MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide) assay and alkaline phosphates (ALP) activity results demonstrated that a generally increasing trend in cell viability was observed for PCL/TNT (0.5wt%) scaffold sintered at 60°C for 90min compared to the control group. Eventually, the quantitative RT-PCR data provided the evidence that the PCL scaffold containing TiO 2 nanotube constitutes a good substrate for cell differentiation leading to ECM mineralization., (Copyright © 2016. Published by Elsevier B.V.)

Aims: The purpose of this multi-phase explorative in vivo animal/surgical and in vitro multi-test experimental study was to (1) create a 3wt%-nanostrontium hydroxyapatite-enhanced calcium phosphate cement (Sr-HA/CPC) for increasing bone formation and (2) creating a simvastatin-loaded poly(lactic-co-glycolic acid) (SIM-loaded PLGA) microspheres plus CPC composite (SIM-loaded PLGA+nanostrontium-CPC). The third goal was the extensive assessment of multiple in vitro and in vivo characteristics of the above experimental explorative products in vitro and in vivo (animal and surgical studies)., Methods and Results Pertaining to Sr-Ha/cpc: Physical and chemical properties of the prepared Sr-HA/CPC were evaluated. MTT assay and alkaline phosphatase activities, and radiological and histological examinations of Sr-HA/CPC, CPC and negative control were compared. X-ray diffraction (XRD) indicated that crystallinity of the prepared cement increased by increasing the powder-to-liquid ratio. Incorporation of Sr-HA into CPC increased MTT assay (biocompatibility) and ALP activity (P<0.05). Histomorphometry showed greater bone formation after 4weeks, after implantation of Sr-HA/CPC in 10 rats compared to implantations of CPC or empty defects in the same rats (n=30, ANOVA P<0.05). METHODS AND RESULTS PERTAINING TO SIM-LOADED PLGA MICROSPHERES+NANOSTRONTIUM-CPC COMPOSITE: After SEM assessment, the produced composite of microspheres and enhanced CPC were implanted for 8weeks in 10 rabbits, along with positive and negative controls, enhanced CPC, and enhanced CPC plus SIM (n=50). In the control group, only a small amount of bone had been regenerated (localized at the boundary of the defect); whereas, other groups showed new bone formation within and around the materials. A significant difference was found in the osteogenesis induced by the groups sham control (16.96±1.01), bone materials (32.28±4.03), nanostrontium-CPC (24.84±2.6), nanostrontium-CPC-simvastatin (40.12±3.29), and SIM-loaded PLGA+nanostrontium-CPC (44.8±6.45) (ANOVA P<0.001). All the pairwise comparisons were significant (Tukey P<0.01), except that of nanostrontium-CPC-simvastatin and SIM-loaded PLGA+nanostrontium-CPC. This confirmed the efficacy of the SIM-loaded PLGA+nanostrontium-CPC composite, and its superiority over all materials except SIM-containing nanostrontium-CPC., (Copyright © 2016 Elsevier B.V. All rights reserved.)