Search

All-terrain vehicle (ATV) incidents are one of the leading causes of injuries and fatalities among youth in the agricultural industry. It has been hypothesized that many youth-related ATV incidents occur because children ride ATVs that do not fit their capabilities and are not following basic safe riding practices. In addition, various ATV safety guidelines regarding youth (e.g., CPSC, ANSI/SVIA, ASI) are inconsistent and may not align with state or local laws. To the best of our knowledge, no comprehensive studies have compared the physical and mental requirements for riding ATVs and the youth's capabilities to ride ATVs safely. Consequently, there are no scientific-based recommendations for age limitation, physical and mental capabilities, and safety requirements for youth to ride ATVs safely. Thus, there is a need to review the available sources related to youth safety and ATVs in the agricultural industry, identify the research voids, and recommend modifications to current ATV guidelines. This study conducted a systematic review of available ATV-related studies, standards, guidelines, and laws to establish better-informed minimum age, physical and mental capabilities, and safety requirements for youths to ride ATVs on the farm.

Although it is well known that properly used Rollover Protective Structures (ROPS) can virtually prevent agricultural tractor rollover fatalities, the U.S. still has hundreds of these fatalities per year. An estimated 1.6 million tractors are not equipped with ROPS. Many of these tractors do not have ROPS commercially available although they were originally designed to support a ROPS. Some tractors have foldable ROPS that are not used properly. Other ROPS, although meet appropriate performance standards, are not effective at eliminating continuous rolls. To meet this need, a Computer-based ROPS Design Program (CRDP) was developed to quickly generate ROPS designs based on agricultural tractor weights and dimensions. The ROPS designed with the CRDP for the Allis Chalmers 5040 tractor successfully passed the SAE J2194 static longitudinal, transverse, and vertical tests. A simple foldable ROPS lift assist was designed and tested to ease in the raising and lowering of ROPS; decreasing the raising torque from 90 Nm to less than 50 Nm, while also lowering the resisting torque to lower the ROPS. A model to determine the critical ROPS height CRH based on off-road vehicle dimensions and center of gravity (CG) height was developed and evaluated.

All-terrain vehicle (ATV) crashes are one of the leading causes of death and injury in agriculture across the United States. Use of ATVs is highly prevalent in rural areas and has seen an increase in their application for a variety of agricultural work tasks. Empirical research on the use of these vehicles for agricultural tasks and associated injuries is limited, especially in the United States. Moreover, little is known about the risk factors associated with ATV-related injuries while doing farm work. A comprehensive review was conducted to evaluate the current injury burden of ATV use in agriculture, the need for future research, and possible solutions related to agricultural ATV safety. Potential injury prevention approaches are evaluated based on the hierarchy of control, including elimination or substitution (using side-by-side vehicles instead of ATVs or modifying ATV design), engineering control (operator protection devices), administrative authority (regulations and standards in the United States and around the world), training, and use of personal protective equipment. In addition, vehicle nomenclature, risk factors, and crash mechanisms are reviewed. Recommendations to decrease the likelihood of ATV crashes and injuries are provided. [ABSTRACT FROM AUTHOR]

Tractor overturn is the leading cause of agricultural fatalities in the U.S. Most of these fatalities can be eliminated using a rollover protective structure (ROPS) and a seatbelt. Unfortunately, not all agricultural tractors designed to support ROPS have ROPS designs. A computer-based ROPS design program (CRDP) was developed and successfully tested to provide quick and simple two-post, rear axle-mounted ROPS designs based on SAE Standard J2194. The program uses the tractor dimensions and mass to calculate the dimensions needed for ROPS components. Excel was used as the framework to provide the input, calculation, and ROPS drawing worksheets. Three ROPS (for Massey Ferguson 265, Long 460, and Allis Chalmers 5040 tractors) were designed and constructed using the CRDP. Static rear, side, and vertical tests were conducted based on SAE J2194 on two of the ROPS. All ROPS performance deflection (RPD) tests were less than the ROPS allowable deflection (RAD), indicating that the ROPS passed the static tests. The third ROPS was successfully mounted on the tractor axle housing within one hour, demonstrating the ease of installation using a bolted corner bracket design. Although the CRDP provided quick and simple ROPS designs, this program does not eliminate the requirement to conduct and pass the performance tests for ROPS designs specified in OSHA and SAE standards., (Copyright© by the American Society of Agricultural Engineers.)

The number of fatalities caused by tractor rollovers has decreased in recent years, but the number of fatal tractor rollover accidents with a folded-down rollover protective structure (ROPS) has increased. Operating a ROPS-equipped tractor in low overhead clearance zones is difficult and sometimes impossible. The foldable ROPS (FROPS) was designed to solve the rigid ROPS problem, but lowering and raising a conventional FROPS is a time-consuming and strenuous process. After operators fold down a FROPS to pass a low overhead clearance zone, some prefer to leave it in the folded or inoperative position, increasing the risk of a rollover fatality. The actuation forces for raising and lowering a FROPS are not well known and may be influenced by actuation speed. A completely randomized block design with two blocks, five levels of speed, and multiple replications was conducted to investigate the effect of speed on actuation torque. The blocks were two sizes of tractor FROPS. The test included five levels of speed, including two levels of static measurement and three levels of dynamic measurement. A variable-speed motor system was used to control the speed for raising and lowering the FROPS. The actuation torque is a function of the FROPS upper part shape, dimensions, material density, turning acceleration, and friction. A theoretical model was developed to predict the actuation torque based on the FROPS shape, dimensions, and material density. For one ROPS, due to friction, the dynamic actuation torque was greater for raising and less for lowering than the theoretical torque. Indicator variable regression was used to analyze the effect of speed on actuation torque. Results showed that speed had a significant (p > 0.05) effect on actuation torque. Although there were statistically significant differences between the dynamic actuation torques, these differences were relatively small and negligible compared to the differences between the static torques., (Copyright© by the American Society of Agricultural Engineers.)