Search

Artificial intelligence (AI) is transforming diffractive optics development through its advanced capabilities in design optimization, pattern generation, fabrication enhancement, performance forecasting, and customization. Utilizing AI algorithms like machine learning, generative models, and transformers, researchers can analyze extensive datasets to refine the design of diffractive optical elements (DOEs) tailored to specific applications and performance requirements. AI-driven pattern generation methods enable the creation of intricate and efficient optical structures that manipulate light with exceptional precision. Furthermore, AI optimizes manufacturing processes by fine-tuning fabrication parameters, resulting in higher quality and productivity. AI models also simulate diffractive optics behavior, accelerating design iterations and facilitating rapid prototyping. This integration of AI into diffractive optics holds tremendous potential to revolutionize optical technology applications across diverse sectors, spanning from imaging and sensing to telecommunications and beyond., Competing Interests: The authors declare that they have no conflict of interest., (© 2024 The Author(s).)

Photonic neural networks (PNNs), utilizing light-based technologies, show immense potential in artificial intelligence (AI) and computing. Compared to traditional electronic neural networks, they offer faster processing speeds, lower energy usage, and improved parallelism. Leveraging light's properties for information processing could revolutionize diverse applications, including complex calculations and advanced machine learning (ML). Furthermore, these networks could address scalability and efficiency challenges in large-scale AI systems, potentially reshaping the future of computing and AI research. In this comprehensive review, we provide current, cutting-edge insights into diverse types of PNNs crafted for both imaging and computing purposes. Additionally, we delve into the intricate challenges they encounter during implementation, while also illuminating the promising perspectives they introduce to the field.

Photosensitive materials are widely used for the direct fabrication of surface relief gratings (SRGs) without the selective etching of the material. It is known that the interferometric approach makes it possible to fabricate SRGs with submicron and even subwavelength periods. However, to change the period of the written SRGs, it is necessary to change the convergence angle, shift a sample, and readjust the interferometric setup. Recently, it was shown that structured laser beams with predetermined, periodically modulated polarization distributions can also be used to fabricate SRGs. A structured laser beam with the desired polarization distribution can be formed with just one polarizing optical element-for example, the so-called depolarizer, a patterned micro-retarder array. The use of such stacked elements makes it possible to directly control the modulation period of the polarization of the generated laser beam. We show that this approach allows one to fabricate SRGs with submicron periods. Moreover, the addition of q -plates, elements effectively used to generate cylindrical vector beams with polarization singularities, allows the efficient formation of fork polarization gratings (FPGs) and the fabrication of higher-order fork-shaped SRGs. Full control of the parameters of the generated FPGs is possible. We demonstrate the formation of FPGs of higher orders (up to 12) by only adding first- and second-order q -plates and half-wave plates to the depolarizers. In this work, we numerically and experimentally study the parameters of various types of SRGs formed using these stacked polarizing elements and show the significant potential of this method for the laser processing of photosensitive materials, which often also serve as polarization sensors.

Computational methods have been established as cornerstones in optical imaging and holography in recent years. Every year, the dependence of optical imaging and holography on computational methods is increasing significantly to the extent that optical methods and components are being completely and efficiently replaced with computational methods at low cost. This roadmap reviews the current scenario in four major areas namely incoherent digital holography, quantitative phase imaging, imaging through scattering layers, and super-resolution imaging. In addition to registering the perspectives of the modern-day architects of the above research areas, the roadmap also reports some of the latest studies on the topic. Computational codes and pseudocodes are presented for computational methods in a plug-and-play fashion for readers to not only read and understand but also practice the latest algorithms with their data. We believe that this roadmap will be a valuable tool for analyzing the current trends in computational methods to predict and prepare the future of computational methods in optical imaging and holography., Supplementary Information: The online version contains supplementary material available at 10.1007/s00340-024-08280-3., Competing Interests: Conflict of interestThe authors declare no competing interests., (© The Author(s) 2024.)

Light beams bearing orbital angular momentum (OAM) are used in various scientific and engineering applications, such as microscopy, laser material processing, and optical tweezers. Precise topological charge control is crucial for efficiently using vortex beams in different fields, such as information encoding in optical communications and sensor systems. This work presents a novel method for optimizing an emitting micro-ring resonator (MRR) for emitting vortex beams with variable orders of OAM. The MRR consists of a ring waveguide with periodic structures side-coupled to a bus waveguide. The resonator is tunable due to the phase change material Sb 2 Se 3 deposited on the ring. This material can change from amorphous to crystalline while changing its refractive index. In the amorphous phase, it is 3.285 + 0 i , while in the transition to the crystalline phase, it reaches 4.050 + 0 i at emission wavelength 1550 nm. We used this property to control the vortex beam topological charge. In our study, we optimized the distance between the bus waveguide and the ring waveguide, the bending angle, and the width of the bus waveguide. The optimality criterion was chosen to maximize the flux density of the radiated energy emitted by the resonator. The numerical simulation results proved our method. The proposed approach can be used to optimize optical beam emitters carrying OAM for various applications.

In this study, we have undertaken a comprehensive numerical investigation of a refractive index sensor designed around a metal-insulator-metal (MIM) plasmonic waveguide. Our approach utilizes the finite element method to thoroughly analyze the sensor's performance. The sensor's configuration utilizes a ring resonator design, which has been slightly modified at the coupling segment. This modification enhances the efficiency of light coupling between a bus waveguide and the ring resonator, particularly at the resonance wavelength. This strategic adjustment significantly improves the device's extinction ratio, a critical factor in its functionality. Remarkably, the sensitivity of this sensor is determined to be approximately 1155.71 nm/RIU, while it possesses a figure of merit of 25.9. Furthermore, our study delves into the intricate mechanism governing the injection of light into the nanoscale MIM waveguide. We achieve this through the incorporation of silicon-tapered waveguides, which play a pivotal role in facilitating the transformation of a dielectric mode into a plasmonic mode, and vice versa. Ultimately, the findings of this research hold significant promise for advancing the field of plasmonic sensing systems based on MIM waveguide technology. The insights gained here pave the way for the practical realization and optimization of highly efficient and precise plasmonic sensors.

We study structural and morphological transformations caused by multipulse femtosecond-laser exposure of Bridgman-grown ϵ-phase GaSe crystals, a van der Waals semiconductor promising for nonlinear optics and optoelectronics. We unveil, for the first time, the laser-driven self-organization regimes in GaSe allowing the formation of regular laser-induced periodic surface structures (LIPSSs) that originate from interference of the incident radiation and interface surface plasmon waves. LIPSSs formation causes transformation of the near-surface layer to amorphous Ga 2 Se 3 at negligible oxidation levels, evidenced from comprehensive structural characterization. LIPSSs imprinted on both output crystal facets provide a 1.2-fold increase of the near-IR transmittance, while the ability to control local periodicity by processing parameters enables multilevel structural color marking of the crystal surface. Our studies highlight direct fs-laser patterning as a multipurpose application-ready technology for precise nanostructuring of promising van der Waals semiconductors, whose layered structure restricts application of common nanofabrication approaches.

According to the age-old adage, while eyes are often considered the gateway to the soul, they might also provide insights into a more pragmatic aspect of our health: blood sugar levels. This potential breakthrough could be realized through the development of smart contact lenses (SCLs). Although contact lenses were first developed for eyesight correction, new uses have recently become available. In the near future, it might be possible to monitor a variety of ocular and systemic disorders using contact lens sensors. Within the realm of glaucoma, SCLs present a novel prospect, offering a potentially superior avenue compared to traditional management techniques. These lenses introduce the possibility of non-invasive and continuous monitoring of intraocular pressure (IOP) while also enabling the personalized administration of medication as and when needed. This convergence holds great promise for advancing glaucoma care. In this review, recent developments in SCLs, including their potential applications, such as IOP and glucose monitoring, are briefly discussed.

Optical fibre sensors are an essential subset of optical fibre technology, designed specifically for sensing and measuring several physical parameters. These sensors offer unique advantages over traditional sensors, making them gradually more valuable in a wide range of applications. They can detect extremely small variations in the physical parameters they are designed to measure, such as analytes in the case of biosensing. This high sensitivity allows them to detect subtle variations in temperature, pressure, strain, the refractive index of analytes, vibration, and other environmental factors with exceptional accuracy. Moreover, these sensors enable remote sensing capabilities. Since light signals are used to carry information, the sensing elements can be placed at distant or inaccessible sites and still communicate the data back to the central monitoring system without signal degradation. In recent times, different attractive configurations and approaches have been proposed to enhance the sensitivity of the optical fibre-based sensor and are briefly explained in this review. However, we believe that the choice of optical fibre sensor configuration should be designated based on the specific application. As these sensors continue to evolve and improve, they will play an increasingly vital role in critical monitoring and control applications across various industries.

Optical switching is an essential part of photonic integrated circuits and the focus of research at the moment. In this research, an optical switch design working on the phenomenon of guided-mode resonances in a 3D photonic-crystal-based structure is reported. The optical-switching mechanism is studied in a dielectric slab-waveguide-based structure operating in the near-infrared range in a telecom window of 1.55 µm. The mechanism is investigated via the interference of two signals, i.e., the data signal and the control signal. The data signal is coupled into the optical structure and filtered utilizing guided-mode resonance, whereas the control signal is index-guided in the optical structure. The amplification or de-amplification of the data signal is controlled by tuning the spectral properties of the optical sources and structural parameters of the device. The parameters are optimized first using a single-cell model with periodic boundary conditions and later in a finite 3D-FDTD model of the device. The numerical design is computed in an open-source Finite Difference Time Domain simulation platform. Optical amplification in the range of 13.75% is achieved in the data signal with a decrease in the linewidth up to 0.0079 µm, achieving a quality factor of 114.58. The proposed device presents great potential in the field of photonic integrated circuits, biomedical technology, and programmable photonics.

In contemporary science and technology, photonic sensors are essential. They may be made to be extremely resistant to some physical parameters while also being extremely sensitive to other physical variables. Most photonic sensors may be incorporated on chips and operate with CMOS technology, making them suitable for use as extremely sensitive, compact, and affordable sensors. Photonic sensors can detect electromagnetic (EM) wave changes and convert them into an electric signal due to the photoelectric effect. Depending on the requirements, scientists have found ways to develop photonic sensors based on several interesting platforms. In this work, we extensively review the most generally utilized photonic sensors for detecting vital environmental parameters and personal health care. These sensing systems include optical waveguides, optical fibers, plasmonics, metasurfaces, and photonic crystals. Various aspects of light are used to investigate the transmission or reflection spectra of photonic sensors. In general, resonant cavity or grating-based sensor configurations that work on wavelength interrogation methods are preferred, so these sensor types are mostly presented. We believe that this paper will provide insight into the novel types of available photonic sensors.

Optical ring resonators (RRs) are a novel sensing device that has recently been developed for several sensing applications. In this review, RR structures based on three widely explored platforms, namely silicon-on-insulator (SOI), polymers, and plasmonics, are reviewed. The adaptability of these platforms allows for compatibility with different fabrication processes and integration with other photonic components, providing flexibility in designing and implementing various photonic devices and systems. Optical RRs are typically small, making them suitable for integration into compact photonic circuits. Their compactness allows for high device density and integration with other optical components, enabling complex and multifunctional photonic systems. RR devices realized on the plasmonic platform are highly attractive, as they offer extremely high sensitivity and a small footprint. However, the biggest challenge to overcome is the high fabrication demand related to such nanoscale devices, which limits their commercialization.

To form a diffraction-free beam with a complex structure, we propose to use a set of primitives calculated iteratively for the ring spatial spectrum. We also optimized the complex transmission function of the diffractive optical elements (DOEs), which form some primitive diffraction-free distributions (for example, a square or/and a triangle). The superposition of such DOEs supplemented with deflecting phases (a multi-order optical element) provides to generate a diffraction-free beam with a more complex transverse intensity distribution corresponding to the composition of these primitives. The proposed approach has two advantages. The first is the rapid (for the first few iterations) achievements of an acceptable error in the calculation of an optical element that forms a primitive distribution compared to a complex one. The second advantage is the convenience of reconfiguration. Since a complex distribution is assembled from primitive parts, it can be reconfigured quickly or dynamically by using a spatial light modulator (SLM) by moving and rotating these components. Numerical results were confirmed experimentally.

In this paper a perfect absorber with a photonic crystal cavity (PhC-cavity) is numerically investigated for carbon dioxide (CO 2 ) gas sensing application. Metallic structures in the form of silver are introduced for harnessing plasmonic effects to achieve perfect absorption. The sensor comprises a PhC-cavity, silver (Ag) stripes, and a host functional material-Polyhexamethylene biguanide polymer-deposited on the surface of the sensor. The PhC-cavity is implemented within the middle of the cell, helping to penetrate the EM waves into the sublayers of the structure. Therefore, corresponding to the concentration of the CO 2 gas, as it increases, the refractive index of the host material decreases, causing a blue shift in the resonant wavelength and vice versa of the device. The sensor is used for the detection of 0-524 parts per million (ppm) concentration of the CO 2 gas, with a maximum sensitivity of 17.32 pm (pico meter)/ppm achieved for a concentration of 366 ppm with a figure of merit (FOM) of 2.9 RIU -1 . The four-layer device presents a straightforward and compact design that can be adopted in various sensing applications by using suitable host functional materials.

Various diffractive, refractive and holographic optical elements, such as diffraction gratings; microlens raster; phase plates; multi-order diffractive optical elements; adaptive mirrors; diffractive and refractive axicons; holographic multiplexes and many others are used to analyze wavefront aberrations. We shortly discuss the features (advantages and disadvantages) of various wavefront aberration sensors in the Introduction. The main part of the paper is devoted to the analysis of the weight coefficients of Zernike polynomials obtained during medical examinations of the cornea in the human eye. Using data obtained by aberrometers, the average values of the Zernike polynomial coefficients for the anterior and posterior surfaces of the healthy eye cornea and a myopic one were calculated. The original wavefront for the anterior and posterior surfaces of the cornea was restored separately, as well as the total wave aberration. For an objective assessment of the quality of vision, the corresponding point spread functions (PSFs) were calculated. We propose to compensate for the aberrations of the myopic eye, taking into account the physical features of the corneal surface. The results of numerical simulation showed that in order to improve the quality of the patient's vision, it is necessary to take into account high-order aberrations of the anterior surface of the cornea in the form of a coma of the third order and aberrations of the fourth order.

Recently, the realization of the spiral mass transfer of matter has attracted the attention of many researchers. Nano- and microstructures fabricated with such mass transfer can be used for the generation of light with non-zero orbital angular momentum (OAM) or the sensing of chiral molecules. In the case of metals and semiconductors, the chirality of formed spiral-shaped microstructures depends on the topological charge (TC) of the illuminating optical vortex (OV) beam. The situation is quite different with polarization-sensitive materials such as azopolymers, azobenzene-containing polymers. Azopolymers show polarization-sensitive mass transfer both at the meso and macro levels and have huge potential in diffractive optics and photonics. Previously, only one-spiral patterns formed in thin azopolymer films using circularly polarized OV beams and double-spiral patterns formed using linearly polarized OV beams have been demonstrated. In these cases, the TC of the used OV beams did not affect the number of formed spirals. In this study, we propose to use two-beam (an OV and a Gaussian beam with a spherical wavefront) interference lithography for realization spiral mass transfer with the desired number of formed spirals. The TC of the OV beam allows for controlling the number of formed spirals. We show the microstructures fabricated by the laser processing of thin azopolymer films can be used for the generation of OAM light at the microscale with the desired TC. The experimentally obtained results are in good agreement with the numerically obtained results and demonstrate the potential of the use of such techniques for the laser material processing of polarization-sensitive materials.

One of the fastest-expanding study areas in optics over the past decade has been metasurfaces (MSs). These subwavelength meta-atom-based ultrathin arrays have been developed for a broad range of functions, including lenses, polarization control, holography, coloring, spectroscopy, sensors, and many more. They allow exact control of the many properties of electromagnetic waves. The performance of MSs has dramatically improved because of recent developments in nanofabrication methods, and this concept has developed to the point that it may be used in commercial applications. In this review, a vital topic of sensing has been considered and an up-to-date study has been carried out. Three different kinds of MS absorber sensor formations, all-dielectric, all-metallic, and hybrid configurations, are presented for biochemical sensing applications. We believe that this review paper will provide current knowledge on state-of-the-art sensing devices based on MSs.

The polarization sensitivity of azopolymers is well known. Therefore, these materials are actively used in many applications of photonics. Recently, the unique possibilities of processing such materials using a structured laser beam were demonstrated, which revealed the key role of the distribution of polarization and the longitudinal component of light in determining the shape of the nano- and microstructures formed on the surfaces of thin azopolymer films. Here, we present numerical and experimental results demonstrating the high polarization sensitivity of thin azopolymer films to the local polarization state of an illuminating structured laser beam consisting of a set of light spots. To form such arrays of spots with a controlled distribution of polarization, different polarization states of laser beams, both homogeneous and locally inhomogeneous, were used. The results obtained show the possibility of implementing a parallel non-uniform patterning of thin azopolymer films depending on the polarization distribution of the illuminating laser beam. We believe that the demonstrated results will not only make it possible to implement the simultaneous detection of local polarization states of complex-shaped light fields but will also be used for the high-performance fabrication of diffractive optical elements and metasurfaces.

Globally, there is active development of photonic sensors incorporating multidisciplinary research. The ultimate objective is to develop small, low-cost, sensitive, selective, quick, durable, remote-controllable sensors that are resistant to electromagnetic interference. Different photonic sensor designs and advances in photonic frameworks have shown the possibility to realize these capabilities. In this review paper, the latest developments in the field of optical waveguide and fiber-based sensors which can serve for environmental monitoring are discussed. Several important topics such as toxic gas, water quality, indoor environment, and natural disaster monitoring are reviewed.

A high-efficiency dual-purpose plasmonic perfect absorber sensor based on LiNbO 3 and graphene layers was investigated in this paper for the refractive index and thermal sensing. The sensor design was kept simple for easy fabrication, comprising a LiNbO 3 substrate with a quartz layer, thin layer of graphene, four gold nanorods, and a nanocavity in each unit cell. The nanocavity is located in the middle of the cell to facilitate the penetration of EM energy to the subsurface layers. The proposed sensor design achieved an output response of 99.9% reflection, which was easy to detect without having any specialized conditions for operability. The performance of the device was numerically investigated for the biomedical refractive index range of 1.33 to 1.40, yielding a sensitivity value of 981 nm/RIU with a figure-of-merit of 61.31 RIU -1 . By including an additional polydimethylsiloxane polymer functional layer on the top, the device was also tested as a thermal sensor, which yielded a sensitivity level of -0.23 nm/°C.

Laser patterning of thin films of materials is widely used for the fabrication of one-, two- and three-dimensional functional nanomaterials. Using structured laser beams with a complex structure of amplitude, phase, and polarization distributions allows one to significantly simplify and speed up the procedure of manufacturing nano- and microstructures with a complex shape, such as a spiral structure. Here, we demonstrate the use of vortex laser beams with a helical wavefront for the realization of spiral mass transfer in azopolymer films. The polarization sensitivity of this material allows us to demonstrate the formation of different three-dimensional structures in the case of linearly or circularly polarized vortex beams of different orders. The presented theoretical analysis shows that the profile of the fabricated structures is defined by the structure of the longitudinal component of the incident radiation, and thus can be easily controlled with the polarization state of the radiation without the need to change the amplitude-phase structure of the beam.

It is known that the astigmatic transformation can be used to analyze the topological charge of a vortex beam, which can be implemented by using various optical methods. In this case, in order to form an astigmatic beam pattern suitable for the clear detection of a topological charge, an optical adjustment is often required (changing the lens tilt and/or the detection distance). In this article, we propose to use multi-channel diffractive optical elements (DOEs) for the simultaneous implementation of the astigmatic transformations of various types and levels. Such multi-channel DOEs make it possible to insert several types of astigmatic aberrations of different levels into the analyzed vortex beam simultaneously, and to form a set of aberration-transformed beam patterns in different diffraction orders in one detection plane. The proposed approach greatly simplifies the analysis of the characteristics of a vortex beam based on measurements in the single plane without additional adjustments. In this article, a detailed study of the effect of various types of astigmatic aberrations based on a numerical simulation and experiments was carried out, which confirmed the effectiveness of the proposed approach.

A Bragg grating (BG) is a one-dimensional optical device that may reflect a specific wavelength of light while transmitting all others. It is created by the periodic fluctuation of the refractive index in the waveguide (WG). The reflectivity of a BG is specified by the index modulation profile. A Bragg grating is a flexible optical filter that has found broad use in several scientific and industrial domains due to its straightforward construction and distinctive filtering capacity. WG BGs are also widely utilized in sensing applications due to their easy integration and high sensitivity. Sensors that utilize optical signals for sensing have several benefits over conventional sensors that use electric signals to achieve detection, including being lighter, having a strong ability to resist electromagnetic interference, consuming less power, operating over a wider frequency range, performing consistently, operating at a high speed, and experiencing less loss and crosstalk. WG BGs are simple to include in chips and are compatible with complementary metal-oxide-semiconductor (CMOS) manufacturing processes. In this review, WG BG structures based on three major optical platforms including semiconductors, polymers, and plasmonics are discussed for filtering and sensing applications. Based on the desired application and available fabrication facilities, the optical platform is selected, which mainly regulates the device performance and footprint.

For many years, optics has been employed in computing, although the major focus has been and remains to be on connecting parts of computers, for communications, or more fundamentally in systems that have some optical function or element (optical pattern recognition, etc.). Optical digital computers are still evolving; however, a variety of components that can eventually lead to true optical computers, such as optical logic gates, optical switches, neural networks, and spatial light modulators have previously been developed and are discussed in this paper. High-performance off-the-shelf computers can accurately simulate and construct more complicated photonic devices and systems. These advancements have developed under unusual circumstances: photonics is an emerging tool for the next generation of computing hardware, while recent advances in digital computers have empowered the design, modeling, and creation of a new class of photonic devices and systems with unparalleled challenges. Thus, the review of the status and perspectives shows that optical technology offers incredible developments in computational efficiency; however, only separately implemented optical operations are known so far, and the launch of the world's first commercial optical processing system was only recently announced. Most likely, the optical computer has not been put into mass production because there are still no good solutions for optical transistors, optical memory, and much more that acceptance to break the huge inertia of many proven technologies in electronics.

In this work, fabrication of a dielectric photonic crystal device and numerical study of its spectral characteristics as a refractive index sensor are presented for near infrared range. The proposed nanosensor device is composed of low-cost dielectric materials, i.e., silicon dioxide and niobium pentoxide, and is fabricated using focused ion-beam milling lithography. In the first part, the fabrication process of the device is discussed, along with the process parameters and their effects on the structural properties of the resulting photonic crystal elements. In the second part, the device is numerically tested as a sensor for the biological refractive index range of 1.33 to 1.4. The performance considerations of the biosensor device are studied for 12 different structural profiles based on the fabrication results. It is shown that the angular-wall-profile of the fabricated structures downgrades the performance of the sensor, and the optimum value of hole depth should be in the range of 930-1500 nm to get the best performance. A sensitivity of 185.117 nm/RIU and a figure of merit of 9.7 were recorded for the optimum design of the device; however, a maximum sensitivity of 296.183 nm/RIU and a figure-of-merit of 13.184 RIU -1 were achieved. The device is recommended for a variety of biosensing applications due to its inert material properties, stable design and easy integration with fiber-optic setups.

The spin Hall effect of light is a manifestation of angular momentum conservation in the process of spin-orbit interaction of light. This optical Hall effect is exhibited in tight focusing of a circularly polarized asymmetric input beam as a shift of the center of gravity of the focal spot in the transverse plane, perpendicular to the direction/axis of symmetry breaking. It is commonly established that the direction of this shift depends on the sign of the spin. Here we show, for the first time, to the best of our knowledge, both analytically and by numerical simulation, that different Cartesian components of an asymmetric circularly polarized focused beam shift in opposite directions by different amounts. Moreover, these shifts depend on the type and degree of the asymmetry and thus can be tuned/controlled. We show how these field components' shifts are related to spin and orbital angular momentum shifts. These findings shed new light on the spin optical Hall effect, facilitate new/simpler ways to measure it, and may broaden the gamut of its applications in manipulation and trapping of particles by light and precision metrology.

Herein we propose a design of a wavelength-tunable integrated vortex beam emitter based on the silicon-on-insulator platform. The emitter is implemented using a PN-depletion diode inside a microring resonator with the emitting hole grating that was used to produce a vortex beam. The resonance wavelengths can be shifted due to the refractive index change associated with the free plasma dispersion effect. Obtained numerical modeling results confirm the efficiency of the proposed approach, providing a resonance wavelength shift while maintaining the required topological charge of the emitted vortex beam. It is known that optical vortices got a lot of attention due to extensive telecommunication and biochemical applications, but also, they have revealed some beneficial use cases in sensors. Flexibility in spectral tuning demonstrated by the proposed device can significantly improve the accuracy of sensors based on fiber Bragg gratings. Moreover, we demonstrate that the proposed device can provide a displacement of the resonance by the value of the free spectral range of the ring resonator, which means the possibility to implement an ultra-fast orbital angular momentum (de)multiplexing or modulation.

We propose to achieve multichannel information transmission in free space by means of variously polarized beams. The interaction of vortex beams of various orders with the main polarization states is theoretically analyzed. The passage of beams with different polarization states through multi-order diffractive optical elements (DOEs) is simulated numerically. Using the simulation results, tables of code correspondence of diffraction order numbers to the presence of phase vortices in the analyzed beams are constructed, which allow one to determine diffraction orders that carry information about various polarization states. The performed experiment made it possible to study the recognition of the first order cylindrical polarization state formed by a Q-plate converter using a phase DOE. In the experiment, these elements were built into a commercial fiber-optic communication system operating at the near-IR frequencies. After detecting the beam polarization state, beams of the required diffraction orders are efficiently coupled into optical fiber using an additional phase element. The developed optical detection system also provides channel suppression of homogeneously polarized components, which are supposed to be used for transmission of other channels.

Currently, old-style personal Medicare techniques rely mostly on traditional methods, such as cumbersome tools and complicated processes, which can be time consuming and inconvenient in some circumstances. Furthermore, such old methods need the use of heavy equipment, blood draws, and traditional bench-top testing procedures. Invasive ways of acquiring test samples can potentially cause patient discomfort and anguish. Wearable sensors, on the other hand, may be attached to numerous body areas to capture diverse biochemical and physiological characteristics as a developing analytical tool. Physical, chemical, and biological data transferred via the skin are used to monitor health in various circumstances. Wearable sensors can assess the aberrant conditions of the physical or chemical components of the human body in real time, exposing the body state in time, thanks to unintrusive sampling and high accuracy. Most commercially available wearable gadgets are mechanically hard components attached to bands and worn on the wrist, with form factors ultimately constrained by the size and weight of the batteries required for the power supply. Basic physiological signals comprise a lot of health-related data. The estimation of critical physiological characteristics, such as pulse inconstancy or variability using photoplethysmography (PPG) and oxygen saturation in arterial blood using pulse oximetry, is possible by utilizing an analysis of the pulsatile component of the bloodstream. Wearable gadgets with "skin-like" qualities are a new type of automation that is only starting to make its way out of research labs and into pre-commercial prototypes. Flexible skin-like sensing devices have accomplished several functionalities previously inaccessible for typical sensing devices due to their deformability, lightness, portability, and flexibility. In this paper, we studied the recent advancement in battery-powered wearable sensors established on optical phenomena and skin-like battery-free sensors, which brings a breakthrough in wearable sensing automation.

We compare transverse structure evolution and energy deposition into the medium within focused multifilament arrays created using two different types of diffraction optical elements (DOEs): TEM 11 phase plate and a Dammann grating. We show that the employment of the Dammann grating provides a robust way to create regular multifilament arrays, which is far less dependent on laser beam quality than one using the phase plate.

Axicon is a versatile optical element for forming a zero-order Bessel beam, including high-power laser radiation schemes. Nevertheless, it has drawbacks such as the produced beam's parameters being dependent on a particular element, the output beam's intensity distribution being dependent on the quality of element manufacturing, and uneven axial intensity distribution. To address these issues, extensive research has been undertaken to develop nondiffracting beams using a variety of advanced techniques. We looked at four different and special approaches for creating nondiffracting beams in this article. Diffractive axicons, meta-axicons-flat optics, spatial light modulators, and photonic integrated circuit-based axicons are among these approaches. Lately, there has been noteworthy curiosity in reducing the thickness and weight of axicons by exploiting diffraction. Meta-axicons, which are ultrathin flat optical elements made up of metasurfaces built up of arrays of subwavelength optical antennas, are one way to address such needs. In addition, when compared to their traditional refractive and diffractive equivalents, meta-axicons have a number of distinguishing advantages, including aberration correction, active tunability, and semi-transparency. This paper is not intended to be a critique of any method. We have outlined the most recent advancements in this field and let readers determine which approach best meets their needs based on the ease of fabrication and utilization. Moreover, one section is devoted to applications of axicons utilized as sensors of optical properties of devices and elements as well as singular beams states and wavefront features.

A multipurpose plasmonic sensor design based on a metal-insulator-metal (MIM) waveguide is numerically investigated in this paper. The proposed design can be instantaneously employed for biosensing and temperature sensing applications. The sensor consists of two simple resonant cavities having a square and circular shape, with the side coupled to an MIM bus waveguide. For biosensing operation, the analytes can be injected into the square cavity while a thermo-optic polymer is deposited in the circular cavity, which provides a shift in resonance wavelength according to the variation in ambient temperature. Both sensing processes work independently. Each cavity provides a resonance dip at a distinct position in the transmission spectrum of the sensor, which does not obscure the analysis process. Such a simple configuration embedded in the single-chip can potentially provide a sensitivity of 700 nm/RIU and -0.35 nm/°C for biosensing and temperature sensing, respectively. Furthermore, the figure of merit ( FOM ) for the biosensing module and temperature sensing module is around 21.9 and 0.008, respectively. FOM is the ratio between the sensitivity of the device and width of the resonance dip. We suppose that the suggested sensor design can be valuable in twofold ways: (i) in the scenarios where the testing of the biological analytes should be conducted in a controlled temperature environment and (ii) for reducing the influence on ambient temperature fluctuations on refractometric measurements in real-time mode.

We show that structured light can amplify the intensity of an Arago-Poisson bright spot, the cornerstone proof of the wave nature of light, by several orders of magnitude. Specifically, we use a thin annular beam produced by either an axicon-lens combination or two axicons to illuminate an opaque circular obstacle. Experimental results confirm the numerical calculations. By judiciously choosing our scheme's parameters, the bright spot intensity can be higher than that of the original beam, meaning that structured light facilitates "focusing" of light behind an obstacle. This amplification, in addition to didactic elucidation of this classical effect, can find use in optical alignment/metrology, lithography, aberration measurements, as well as in basic science studies of the Arago-Poisson spot in matter waves.

Herein, we have discussed three major methods which have been generally employed for the generation of optical beams with orbital angular momentum (OAM). These methods include the practice of diffractive optics elements (DOEs), metasurfaces (MSs), and photonic integrated circuits (PICs) for the production of in-plane and out-of-plane OAM. This topic has been significantly evolved as a result; these three methods have been further implemented efficiently by different novel approaches which are discussed as well. Furthermore, development in the OAM detection techniques has also been presented. We have tried our best to bring novel and up-to-date information to the readers on this interesting and widely investigated topic.

We propose a method for the design of metalenses generating and focusing so-called vector Lissajous beams (VLBs), a generalization of cylindrical vector beams (CVBs) in the form of vector beams whose polarization vector is defined by two orders (p, q). The designed metalenses consist of subwavelength gratings performing the polarization transformation of the incident linearly polarized laser beams and a sublinearly chirped lens term for the realization of the beam focusing. The possibility of using VLBs for the realization of laser beams with a complex Poynting vector is theoretically shown. The certain choice of orders (p, q) of the generated VLBs makes it possible to control the type of various electromagnetic field components as well as the components of the complex Poynting vector. For example, in contrast to VLBs, the classical types of CVBs cannot provide an imaginary part in the longitudinal component of the Poynting vector. Such light fields are promising for exciting non-standard forces acting on the trapped nano- and microparticles.

We show that by breaking the symmetry of a beam subjected to tight focusing, namely by obscuring half of it or, equivalently, shifting the beam away from the lens axis, it is possible to obtain novel light properties in the focal spot which, to the best of our knowledge, have not been observed before. For example, a linearly polarized beam half-obstructed or shifted from the axis generates longitudinal and transverse electrical field components, both of which peak on-axis. The ratio of the intensities of these two components can be tuned by changing the shift distance, the size, and the azimuthal location of the displaced incoming beam. Moreover, such symmetry breaking of a linearly polarized beam acts as a catalyst for producing distributions of circular polarization/longitudinal spin angular momentum, as well as orbital angular momentum, in the focal plane. The simple method for generating co-incident longitudinal and transverse components with a controllable ratio may find applications in laser machining, particle manipulation, etc.

In this work, a straightforward and highly sensitive design of a CO 2 gas sensor is numerically investigated using the finite element method. The sensor is based on a plasmonic metal-insulator-metal (MIM) waveguide side coupled to a square ring cavity filled with polyhexamethylene biguanide (PHMB) functional material. The refractive index of the functional material changes when exposed to the CO 2 and that change is linearly proportional to the concentration of the gas. The sensors based on surface plasmon polariton (SPP) waves are highly sensitive due to the strong interaction of the electromagnetic wave with the matter. By utilizing PHMB polymer in the MIM waveguide plasmonic sensor provides a platform that offers the highest sensitivity of 135.95 pm/ppm which cannot be obtained via optical sensors based on silicon photonics. The sensitivity reported in this work is ∼7 times higher than reported in the previous works. Therefore, we believe that the results presented in this paper are exceedingly beneficial for the realization of the sensors for the detection of toxic gases by employing different functional materials.

We report an atmospheric multichannel data transmission system with channel separation by vortex beams of various orders, including half-integer values. For the demultiplexing of the communication channels, a multichannel diffractive optical element (DOE) is proposed, being matched with the used vortex beams. The considered approach may be realized without digital processing of the output images, but only based on the numbers of informative diffraction orders, similar to sorting. The system is implemented based on two spatial light modulators (SLMs), one of which forms a multiplexed signal on the transmitting side, and the other implements a multichannel DOE for separating the vortex beams on the receiving side. The stability of the communication channel to atmospheric interference and the crosstalk between the channels are investigated.

Optical vortex (OV) beams are widely used for the generation of light fields with transverse energy flow inducing orbital motion of the nano- and microparticles in the transverse plane. Here, we present some new modifications of OV beams with autofocusing properties for shaping complex transverse energy flow distributions varying in space. The angular component of the complex amplitude of these beams is defined by the superpositions of OV beams with different topological charges. The proposed approach provides a convenient method to control the three-dimensional structure of the generated autofocusing OV beams. The control of the transverse distribution of an autofocusing beam provides a wide variety of generated fields with both rotating and periodic properties, which can be used in the field of laser manipulation and laser material processing. Thus, the obtained numerical results predict different types of motion of the trapped particles for the designed OV autofocusing beams. The experimental results agree with modeling results and demonstrate the principal possibility to shape such laser beams using spatial light modulators.

In this paper, we have numerically investigated a metasurface based perfect absorber design, established on the impedance matching phenomena. The paper comprises of two parts. In the first part, the device performance of the perfect absorber-which is composed of silicon nano-cylindrical meta-atoms, periodically arranged on a thin gold layer-is studied. The device design is unique and works for both x-oriented and y-oriented polarized light, in addition to being independent of the angle of incidence. In the second part of the paper, a CO 2 gas sensing application is explored by depositing a thin layer of functional host material-a polyhexamethylene biguanide polymer-on the metasurface. The refractive index of the host material decreases due to the absorption of the CO 2 gas. As a result, the resonance wavelength of the perfect absorber performs a prominent blueshift. With the help of the proposed sensor design, based on metasurface, the CO 2 gas concentration range of 0-524 ppm was detected. A maximum sensitivity of 17.3 pm/ppm was acquired for a gas concentration of 434 ppm. The study presented in this work explores the opportunity of utilizing the metasurface perfect absorber for gas sensing applications by employing functional host materials.

Diffraction is a phenomenon related to the wave nature of light and arises when a propagating wave comes across an obstacle. Consequently, the wave can be transformed in amplitude or phase and diffraction occurs. Those parts of the wavefront avoiding an obstacle form a diffraction pattern after interfering with each other. In this review paper, we have discussed the topic of non-diffractive beams, explicitly Bessel beams. Such beams provide some resistance to diffraction and hence are hypothetically a phenomenal alternate to Gaussian beams in several circumstances. Several outstanding applications are coined to Bessel beams and have been employed in commercial applications. We have discussed several hot applications based on these magnificent beams such as optical trapping, material processing, free-space long-distance self-healing beams, optical coherence tomography, superresolution, sharp focusing, polarization transformation, increased depth of focus, birefringence detection based on astigmatic transformed BB and encryption in optical communication. According to our knowledge, each topic presented in this review is justifiably explained.

The paper discusses photoinduced microrelief formation in a film of an azopolymer. A theoretical study of the effect of laser beam polarization on the balance of optical forces acting under the direct action of paraxial Gaussian beams on the irradiated substance was made. We show that taking into account the gradient and scattering components of the force does not allow us to correctly describe the shape of the microasperities obtained on a carbazole-containing azopolymer. An approximation function is presented that describes the dependence of the microasperities' shapes on the non-gradient component of the optical force of laser radiation in the absence and presence of a vortex phase. A comparative analysis of the approximation results and experimentally obtained microreliefs was carried out.

Complex polarization-phase transformations that are realized using easy-to-manufacture optical elements are considered. The manufacturing technology of such elements is based on the angular discretization of the required polarization and phase distributions, which allows one to make optical elements in the form of sector sandwich structures consisting of polarized and phase plates stacked together. We analyze analytically and study numerically the main types of such sector sandwich structures for the formation of cylindrical polarizations of various orders. New effects are observed, which result in the appearance of complex polarized beams with vortices of various orders, arising after the passage through polarizing plates and their combinations with differently rotated phase plates. The results of the experimental study of the formed beams using a multichannel diffraction filter are consistent with theory.

Herein, a compact and efficient inverted tapered ridge-to-slot waveguide coupler design based on the silicon-on-insulator platform is presented. The proposed device consists of three segments such as ridge waveguide, inverted taper segment, and slot waveguide. The coupling segment resembles a V shape, which provides good mode-matching between the ridge and slot waveguide. Two significant aspects of the proposed coupler design are discussed. In the first part of the paper, the coupler design optimized at 1.55 µm is suggested for optical interconnect. The propagation loss and coupling efficiency of 1.69 dB/µm and 91% are obtained for the 100 nm long tapered segment introduced between the ridge waveguide and slot waveguide, respectively. This propagation loss of the device includes the loss suffered by the ridge waveguide, tapered segment, and slot waveguide. Our proposed device design can be used in integrated optical platforms, where the efficient coupling of light to slot waveguides is required. Whereas, in the second part, the coupler design is optimized at the mid-infrared of 3.392 µm for an evanescent field absorption methane gas sensor. Slot waveguide offers excessive light-matter interaction due to its strong mode confinement in the low index material. The evanescent field ratio of ∼0.73 is obtained for the optimized waveguide geometry. As a result, 3 dB decay in the transmitted power can be obtained at 60% of gas concentration present in the ambient medium.

We consider a new type of vector beam, the vector Lissajous beams (VLB), which is of double order ( p , q ) and a generalization of cylindrical vector beams characterized by single-order p . The transverse components of VLBs have an angular relationship corresponding to Lissajous curves. A theoretical and numerical analysis of VLBs was performed, showing that the ratio and parity of orders ( p , q ) affect the properties of different components of the electromagnetic field (EF) (whether they be real, imaginary, or complex). In addition, this allows one to engineer the imaginary part of the longitudinal component of the electromagnetic field and control the local spin angular momentum density, which is useful for optical tweezers and future spintronics applications.