Search

Incorporation of momentum gradients produced due to inertial motion of the lid along with the presence of temperature differences in the configuration make the physical problem more significant. The joint variation of momentum and thermal diffusion in diversified natural liquids is recognized as mixed convection. Valuable attention has been received by such a phenomenon in different areas of science and technology such as in wind current --based solar receivers, electronic instruments, control of emergency shutdown in reactors, thermal exchangers, oceanic currents, control of atmospheric pollution, and so on. So, the main focus is to contemplate hydrothermal characteristics of a power-law fluid contained in a square cavity with themovement of the upper lid and being thermally adiabatic. The other extremities are considered to be at rest, and the base wall is prescribed with uniform/nonuniform temperature distributions. The governing formulation of the problem is handled by executing a finite element approach. Hybrid meshing is performed for domain discretization, and weak variational formulation is utilized for formulation discretization. Second-degree polynomials are employed as the interpolation function, providing information about velocity and temperature distributions at boundary and intermediate nodes. The system of finalized non-linear equations is resolved by using the Paradiso software. The results for velocity and temperature distributions are attained comparatively for uniformly and non-uniformly heated profiles. The kinetic energy and average Nusselt number are also computed against flow concerning variables. From the attained graphical and tabular data, it is deduced that by increasing the Reynolds number, inertial forces dominate over buoyancy forces and the effect of lid movement is prominent on flow characteristics. It is also inferred that for the shear thickening case and for all values of the Reynolds number, the average Nusselt number shows a constant behavior. [ABSTRACT FROM AUTHOR]

This study envisions the hydrothermal characteristics of a viscous fluid in a homogenously permeable hexagonal enclosure. Permeability aspects in the flow domain are described by employing the Brinkman-extended Darcy law. A corrugated hexagonal enclosure along with the placement of a star-shaped fin is taken into account. Heated rectangular blocks at horizontal extremities are installed and sliding sides of the enclosure are considered to be cold to provide convegtive potential to the flow. In addition, adjoining portions of the heated rectangular blocks are supposed to be adiabatic. The dimensionless governing .quations of the resultant problem are derived initially and then solved numerically by implementing the Galerkin finite element approach, and COMSOL is obliged. For this purpose, first, domain discretization is demonstrated in view of 2D elements by performing hybridized meshing. Then, the system of non-linear equations is resolved by a non-linear solver (PARADISO). The grid convergence test is performed to confirm the credibility of the carried out simulations by calculating the average Nusselt number at different refinement levels. A change in associated distributions against the involved physical parameters (Darcy number (Da), Rayleigh number (Ra), and Prandtl number (Pr)) for a wide range is revealed through graphs and tables. Quantities like kinetic energy and heat flux (local and average) are also evaluated through concerned parameters. The results clearly demonstrate that the Darcy number tends to reduce the heat transfer rate. In particular, it is depicted that by increasing the Rayleigh number (Ra), strengthening in the temperature potential arises in the system, thereby magnifying the heat transfer rate. Moreover, it is disclosed that by reducing the Darcy number, kinetic energy shows a decreasing trend. [ABSTRACT FROM AUTHOR]

A study on strategies regarding advancement in heat transfer characteristics in two-dimensional closed domains by placing cold cylinders is conducted. This effort is undertaken due to the fact that active and passive control in heat transmission is connected with provision of temperature differences at different locations of enclosures. Based on the experiments, researchers have concluded that placement of cold cylinder in non-uniformly distributed heat in a cavity is the most effective technique to enrich heat transfer rate, along with reducing the the waste of extra heat generation in processes such as polymer and aero dynamical extrusion, glass cooling, refrigeration, heating and cooling systems. Thus, the prime goal of this work is to outline heat and flow characteristics of non-linear fluid occupied in a square enclosure with adjustment of the cold cylinder. Heat transfer attributes are incorporated by accounting buoyancy forces and forming coupling of molecular diffusion of fluid within the flow domain. Formulation of the problem in dimensionless form is attained by encapsulating the aspects of natural convection in view of principal partial differential equations. Parametric study for governing expressions is computed numerically with the finite element method based on COMSOL Multiphysics version 5.6. Quadric interpolating functions are used to obtain information about velocity and temperature on nodes in elements. Hybrid meshing is manifested for discretization of the domain into rectangular and triangular elements. For the optimized variation in flow structures, prospective parameters are varied from 0.5 ≤ n ≤ 1.5 ,   5   ≤   Pr   ≤   35 and 10 2   ≤   R a   ≤ 10 6 . The achieved results are projected graphically through streamlines, isotherms, and local and average Nusselt numbers. Tabular data for kinetic energy and wall heat flux are also calculated. It is inferred through the analysis that, with uplift in the Rayleigh number R a elevation in the magnitude of kinetic energy and convective heat transfer arises, whereas the reverse pattern is depicted versus the power–law index n. [ABSTRACT FROM AUTHOR]