Search

Tacrolimus is an immunosuppressant that is frequently used following renal transplantation. Several mild neurological side effects of tacrolimus have been reported in the literature; however, severe complications in the form of confusion, seizures, and coma are rare. Herein, we report a 16-year-old boy on tacrolimus following living-donor kidney transplant, who presented with subacute onset of hand tremors, headache, altered mental status, and progressed to akinetic mute state. He was diagnosed with tacrolimus-induced leukoencephalopathy based on findings of his magnetic resonance imaging and ruling out other possible causes. He showed clinical and radiological improvement after discontinuation of tacrolimus. Radiological features of tacrolimus-induced leukoencephalopathy are more heterogenous than commonly perceived and should be suspected in such patients. The potential neurotoxicity of tacrolimus should be recognized in patients with renal transplantation, and switching to a different immunosuppressant is warranted to prevent permanent neurological damage.

Misbahuddin Khaja,1 Darryl Adler,2 George Lominadze2 1Division of Pulmonary and Critical Care Medicine, Bronx Lebanon Hospital Center, Affiliated with Icahn School of Medicine at Mount Sinai, 2Division of Critical Care Medicine, New York Presbyterian‑Lawrence Hospital Center, Affiliated with Columbia University College of Physician and Surgeons, Bronx, New York, NY, USA Background: Brain abscess is an uncommon but life-threatening infection. It involves a focal, intracerebral infection that begins in a localized area of cerebritis and develops into a collection of pus, surrounded by a well-vascularized capsule. Brain abscess still poses a significant problem in developing countries but rarely in developed countries. Predisposing factors vary in different parts of the world. With the introduction of antibiotics and imaging studies, the mortality rate has decreased between 5% and 15%. If left untreated it may lead to serious neurologic sequelae. The temporal lobe abscess can be caused by conditions like sinusitis, otitis media, dental infections, and mastoiditis if left untreated or partially treated. Additionally, in neurosurgical procedures like craniotomy, the external ventricular drain can get infected, leading to abscess formation. Case presentation: We present the case study of an elderly female patient who presented with expressive aphasia caused by brain abscess, secondary to Streptococcus intermedius infection. The 72-year-old female with a medical history of hypertension came to hospital for evaluation with word-finding difficulty, an expressive aphasia that began a few days prior to presentation. Computed tomography of the head showed a left temporal lobe mass-like lesion, with surrounding vasogenic edema. The patient was empirically started on courses of antibiotics. The next day, she was subjected to magnetic resonance imaging of the brain, which showed a left temporal lobe septated rim-enhancing mass lesion, with bright restricted diffusion and diffuse surrounding vasogenic edema consistent with abscess. The patient was also seen by the neurosurgery department and underwent stereotactic, left temporal craniotomy, with drainage, and resection of abscess. Tissue culture grew S. intermedius sensitive to ampicillin sulbactam. Subsequently her expressive aphasia improved. Conclusion: Brain abscess has a high mortality, however a significant proportion of patients with appropriately treated abscess recover completely and can survive without significant neurologic damage. Advanced imaging modalities may yield more accurate methods of differentiation of mass lesions in the brain. Biopsy of brain lesion with early initiation of appropriate antibiotics will change the outcome. Keywords: expressive aphasia, Streptococcus intermedius, brain abscess

Designing a rapid, reliable and sensitive assay, for detection of hepatitis B virus and Hepatitis C virus variants by real-time PCR, is challenging at best. A recent approach for quantifying the viral load using the sensitive fluorescence principle, was used in this study. A total of 350 samples were collected from outpatient unit, Center for Liver Research and Diagnostics (CLRD). Complete Human HBV DNA and HCV sequences were obtained from the National Centre for Biotechnology Information (NCBI); primers and probes were designed and synthesized from core, surface and x region of Hepatitis B and UTR region of HCV. Real-time based detection was done, using standard kit and in-house generated standards and RT-PCR protocols. A standard curve was generated by using the Smart Cycler II software and serial dilution 102 to 108 of cloned viral regions, the calibration curve was linear in a range from 102 to108 cp/ml for both HBV and HCV, with R2 value of 0.999 and 0.995. Out of 100 predetermined HCV negative samples, 02 samples were found positive with in-house developed RT-PCR assay, the positivity of this sample was confirmed by sequencing the amplified product. Low cost of this assay procedure and précised sample volume will permit the assay to be implemented for routine screening of Hepatitis B and C virus mono-infection and co-infection using Real Time PCR , Nucleic acid Chip technology and Fluorescent End Point detection systems. This assay is reproducible showing limited inter and intra assay variability. Our results correlated well with the standard kit for HBV and HCV virus monitor.

Small ruminants and camels are important livestock species in the United Arab Emirates (UAE), although Brucella infection can limit their productivity. This study aimed to investigate the seroprevalence of Brucella infection and its associated risk factors in small ruminants and camels in the Emirate of Abu Dhabi. Additionally, seropositive animals were tested for the DNA of Brucella. Multispecies competitive enzyme-linked immunosorbent assay (c-ELISA) and multispecies indirect (i-ELISA) were used to test 3,086 animals from 2022 to 2023. Brucella cell surface 31 kDa protein (bcsp31) gene-based real-time polymerase chain reaction (q-PCR) was used to detect Brucella DNA. Multivariate logistic regression was used to assess the association between seroprevalence and potential risk factors. The overall seroprevalences of Brucella infection were 1.7% (95% confidence interval [CI], 1.2%–2.2%) and 5.8% (95% CI, 5.0%–6.7%) based on serial and parallel testing, respectively. The DNA of Brucella was detected in 13 of the 51 seropositive animals. The overall seroprevalence of Brucella infection was associated with the region, type of animal holding, species, and age of the animals. In conclusion, this study documented Brucella infection in small ruminants and camels in the Emirate of Abu Dhabi, warranting necessary intervention strategies to eliminate Brucella infections in livestock populations.

Because of its excellent mechanical qualities and weldability, titanium alloy is used in many different biomedical applications. Wire electrical discharge machining may be used to machine materials with such greater strengths and intricate forms. Using Taguchi-Data Envelopment Analysis-based Ranking (DEAR) approach and zinc-diffused coated brass wire electrode to improve Titanium alloy machining was the goal of this research project. The quality metrics that were taken into consideration were sur-face roughness, kerf width, and material removal rate. Among the selected factors, with an error of 2.7%, the optimal configuration of input factors was determined to be 130 µs (Ton), 40 µs (Toff), 50 V (SV), 6 A (IP), and 8 Kg (WT). Due to its relevance in the process of deionization, the Ton is the high-est influential parameter for creating quality measurements.

Our recent studies revealed the role of mouse Aprataxin PNK-like Factor (APLF) in development. Nevertheless, the comprehensive characterization of mouse APLF remains entirely unexplored. Based on domain deletion studies, here we report that mouse APLF's Acidic Domain and Fork Head Associated (FHA) domain can chaperone histones and repair DNA like the respective human orthologs. Immunofluorescence studies in mouse embryonic stem cells showed APLF co-localized with γ-tubulin within and around the centrosomes and govern the number and integrity of centrosomes via PLK4 phosphorylation. Enzymatic analysis established mouse APLF as a kinase. Docking studies identified three putative ATP binding sites within the FHA domain. Site-directed mutagenesis showed that R37 residue within the FHA domain is indispensable for the kinase activity of APLF thereby regulating the centrosome number. These findings might assist us comprehend APLF in different pathological and developmental conditions and reveal non-canonical kinase activity of proteins harbouring FHA domains that might impact multiple cellular processes.

Background and Aim: Ostrich (Struthio camelus) farming in the United Arab Emirates (UAE) is a relatively new field of farming. Farmed ostriches are susceptible to ectoparasite infestation, which affects their production. This study was conducted to estimate the prevalence of ectoparasites on ostriches raised on a farm in Abu Dhabi Emirate. Materials and Methods: The feathers of 42 ostriches (26 females and 16 males) were collected and morphologically examined for ectoparasites. In total, 283 lice (89 males and 194 females) were collected from birds. However, there were no ticks or other ectoparasites. Lice were preserved in 1.5 mL tubes containing 70% ethanol and were later identified using taxonomic keys. The prevalence, mean intensity of infection, and mean abundance were estimated. Results: One louse species, Struthiolipeurus struthionis was identified. To the best of our knowledge, this is the first report of S. struthionis in ostriches raised in the UAE with an overall prevalence of 88%. The prevalence of lice was significantly higher in July (100%) than that in May (66.7%). Likewise, the mean intensity and abundance of lice were significantly higher in June (10.6 and 9.94, respectively) than in May (3.25 and 2.2, respectively). Conclusion: The high prevalence of lice poses a serious risk to ostrich farming by negatively affecting the health and productivity of ostriches.

Objective: The objectives of this research are twofold. The primary goal is to introduce, investigate, and contrast consolidative multi-criteria decision-making (C-MCDM) approaches. The second objective is the investigation of five alternative additive manufacturing materials. Methods: It integrates the subjective and objective weights using the Bayes hypothesis in conjunction with a normal method. Chang's Extent Analysis Method under fuzzy logic is used to estimate subjective weights and the CRITIC approach is used for assessing objective weights. Ranking techniques, including the simple ranking process (SRP), multi-objective optimization based on ratio analysis (MOORA), measurement alternatives and ranking according to compromise solution (MARCOS), and technique for order preference by similarity to ideal solution (TOPSIS) are applied. It also encompasses sensitivity analysis based on Kendall's coefficient of concordance and rank reversal phenomenon analysis. Spearman's rank correlation coefficient, a weighted rank measure of correlation, and rank similarity coefficient are among the metrics used to evaluate agreement between different approaches. It entails gathering expert opinions regarding the importance of various criteria as well as conducting extensive experiments. Results: The findings of the study indicate that polylactic acid is the best material to use for orthoses. When compared to the other MCDM approaches being discussed, SRP is the most reliable approach. It is also demonstrated that the SRP, MARCOS, and TOPSIS methods are rank reversal-free. Furthermore, SRP exhibits a very poor association with the TOPSIS technique but a strong correlation with the MOORA and MARCOS approaches. Conclusions: To ensure results reliability, it is necessary to consider both the subjectivity and objectivity of weights as well as apply multiple MCDM methodologies in addition to sensitivity analysis.

Background: The United Arab Emirates (UAE) has witnessed rapid urbanization and a surge in pet ownership, sparking concerns about the possible transfer of antimicrobial resistance (AMR) from pets to humans and the environment. This study delves into the whole-genome sequencing analysis of ESBL-producing E. coli strains from healthy cats and dogs in the UAE, which exhibit multidrug resistance (MDR). Additionally, it provides a genomic exploration of the mobile colistin resistance gene mcr-1.1, marking the first instance of its detection in Middle Eastern pets. Methods: We investigate 17 ESBL-producing E. coli strains from healthy UAE pets using WGS and bioinformatics analysis to identify genes encoding virulence factors, assign diverse typing schemes to the isolates, and scrutinize the presence of AMR genes. Furthermore, we characterized plasmid contigs housing the mcr-1.1 gene and conducted phylogenomic analysis to evaluate their relatedness to previously identified UAE isolates. Results: Our study unveiled a variety of virulence factor-encoding genes within the isolates, with fimH emerging as the most prevalent. Regarding β-lactamase resistance genes, the blaCTX group 1 gene family predominated, with CTX-M-15 found in 52.9% (9/17) of the isolates, followed by CTX-M-55 in 29.4% (5/17). These isolates were categorized into multiple sequence types (STs), with the epidemic ST131 being the most frequent. The presence of the mcr-1.1 gene, linked to colistin resistance, was confirmed in two isolates. These isolates belonged to ST1011 and displayed distinct profiles of β-lactamase resistance genes. Phylogenomic analysis revealed close connections between the isolates and those from chicken meat in the UAE. Conclusion: Our study underscores the presence of MDR ESBL-producing E. coli in UAE pets. The identification of mcr-1.1-carrying isolates warrants the urgency of comprehensive AMR surveillance and highlights the role of companion animals in AMR epidemiology. These findings underscore the significance of adopting a One Health approach to mitigate AMR transmission risks effectively.

Background & Aims: The mechanism behind the progressive pathological alteration in metabolic dysfunction-associated steatotic liver disease/steatohepatitis (MASLD/MASH)-associated hepatocellular carcinoma (HCC) is poorly understood. In the present study, we investigated the role of the polyol pathway enzyme AKR1B1 in metabolic switching associated with MASLD/MASH and in the progression of HCC. Methods: AKR1B1 expression was estimated in the tissue and plasma of patients with MASLD/MASH, HCC, and HCC with diabetes mellitus. The role of AKR1B1 in metabolic switching in vitro was assessed through media conditioning, lentiviral transfection, and pharmacological probes. A proteomic and metabolomic approach was applied for the in-depth investigation of metabolic pathways. Preclinically, mice were subjected to a high-fructose diet and diethylnitrosamine to investigate the role of AKR1B1 in the hyperglycemia-mediated metabolic switching characteristic of MASLD-HCC. Results: A significant increase in the expression of AKR1B1 was observed in tissue and plasma samples from patients with MASLD/MASH, HCC, and HCC with diabetes mellitus compared to normal samples. Mechanistically, in vitro assays revealed that AKR1B1 modulates the Warburg effect, mitochondrial dynamics, the tricarboxylic acid cycle, and lipogenesis to promote hyperglycemia-mediated MASLD and cancer progression. A pathological increase in the expression of AKR1B1 was observed in experimental MASLD-HCC, and expression was positively correlated with high blood glucose levels. High-fructose diet + diethylnitrosamine-treated animals also exhibited statistically significant elevation of metabolic markers and carcinogenesis markers. AKR1B1 inhibition with epalrestat or NARI-29 inhibited cellular metabolism in in vitro and in vivo models. Conclusions: Pathological AKR1B1 modulates hepatic metabolism to promote MASLD-associated hepatocarcinogenesis. Aldose reductase inhibition modulates the glycolytic pathway to prevent precancerous hepatocyte formation. Impact and implications: This research work highlights AKR1B1 as a druggable target in metabolic dysfunction-associated steatotic liver disease (MASLD) and hepatocellular carcinoma (HCC), which could provide the basis for the development of new chemotherapeutic agents. Moreover, our results indicate the potential of plasma AKR1B1 levels as a prognostic marker and diagnostic test for MASLD and associated HCC. Additionally, a major observation in this study was that AKR1B1 is associated with the promotion of the Warburg effect in HCC.

Three-dimensional printing—especially with fused deposition modeling (FDM)—is widely used in the medical field as it enables customization. FDM is versatile owing to the availability of various materials, but selecting the appropriate material for a certain application can be challenging. Understanding materials’ mechanical behaviors, particularly those of polymeric materials, is vital to determining their suitability for a given application. Physical testing with universal testing machines is the most used method for determining the mechanical behaviors of polymers. This method is resource-intensive and requires cylinders for compression testing and unique dumbbell-shaped specimens for tensile testing. Thus, a specialized fixture must be designed to conduct mechanical testing for the customized orthosis, which is costly and time-consuming. Finite element (FE) analysis using an appropriate material model must be performed to identify the mechanical behaviors of a customized shape (e.g., an orthosis). This study analyzed three material models, namely the Bergström–Boyce (BB), three-network (TN), and three-network viscoplastic (TNV) models, to determine the mechanical behaviors of polymer materials for personalized upper limb orthoses and examined three polymer materials: PLA, ABS, and PETG. The models were first calibrated for each material using experimental data. Once the models were calibrated and found to fit the data appropriately, they were employed to examine the customized orthosis’s mechanical behaviors through FE analysis. This approach is innovative in that it predicts the mechanical characteristics of a personalized orthosis by combining theoretical and experimental investigations.