Search

Dense medium separation (DMS) is often used to reject a large portion of gangue material upfront to create cost and energy savings during processing. As lower-grade ores with complex mineralogy are being increasingly exploited, the properties of the gangue minerals begin to play a more important role in the upgrading of the ore. It is therefore important to understand these mineralogical factors to be able to select suitable processing routes for specific ore types. Two nickel sulfide deposits in southern Africa were chosen as case studies to understand differences in DMS efficiency when applied to different ores: Ore A and Ore B. Both ores showed nickel upgrades using DMS and the products were then characterized using QEMSCAN, with the aid of X-ray diffraction and electron probe microanalysis. Overall, particle density remains the main control on the separation, followed by sulfide texture, with massive and net-textured sulfides having larger grain sizes and therefore better liberation than disseminated sulfides. In addition to the concentration of sulfides, primary and secondary silicate minerals are separated by their density differences, which can affect the recovery of finely disseminated sulfides associated with them. Particle size is also important in DMS, with material near the cut-point density separating on size rather than density. The understanding of the mineralogical properties affecting DMS can aid in the prediction of the suitability of DMS for different ore types.

Although flucytosine is a key component of WHO-recommended induction treatment for HIV-associated cryptococcal meningitis, this antifungal agent is not widely available in low-income and middle-income countries due to limited production and cost. In 2018, a national flucytosine access programme was initiated in South Africa. We aimed to determine the effectiveness of flucytosine-containing induction regimens in routine care to motivate for the urgent registration of flucytosine and its inclusion in treatment guidelines.In this cross-sectional study, we compared outcomes of adults aged 18 years and older with incident laboratory-confirmed cryptococcal meningitis treated with or without flucytosine-containing regimens at 19 sentinel hospitals in South Africa. A case of cryptococcosis was defined as illness in an adult with: (1) positive cerebrospinal fluid (CSF) India ink microscopy; (2) a positive CSF cryptococcal antigen test; or (3) culture of Cryptococcus neoformans or Cryptococcus gattii from CSF or any other specimen. We excluded patients without a case report form, those with an unknown or negative HIV serology result, those with a recurrent episode, and those who did not receive antifungal treatment in hospital. We assessed cumulative in-hospital mortality at 14 days and 30 days and calculated the overall crude in-hospital case-fatality ratio. We used random-effects logistic regression to examine the association between treatment group and in-hospital mortality.From July 1, 2018, to March 31, 2020, 10 668 individuals were diagnosed with laboratory-confirmed cryptococcal meningitis, 7787 cases diagnosed at non-enhanced surveillance sites and 567 cases from eight enhanced surveillance sites with no access to flucytosine were excluded. Of 2314 adults with a first episode of cryptococcosis diagnosed at 19 facilities with access to flucytosine, 1996 had a case report form and of these, 1539 received induction antifungal treatment and were confirmed HIV-seropositive first-episode cases. Of 1539 patients who received antifungal therapy, 596 (38·7%) individuals received a flucytosine-containing regimen and 943 (61·3%) received another regimen. The median age was 36 years (IQR 32-43) and 906 (58·9%) participants were male and 633 (41·1%) were female. The crude in-hospital case-fatality ratio was 23·9% (95% CI 20·0-27·0; 143 of 596) in those treated with flucytosine-containing regimens and 37·2% (95% CI 34·0-40·0; 351 of 943) in those treated with other regimens. Patients admitted to non-academic hospitals (adjusted odds ratio [aOR] 1·95 [95% CI 1·53-2·48]; p0·0001) and those who were antiretroviral treatment-experienced (aOR 1·30 [1·02-1·67]; p=0·033) were more likely to receive flucytosine. After adjusting for relevant confounders, flucytosine treatment was associated with a 53% reduction in mortality (aOR 0·47 [95% CI 0·35-0·64]; p0·0001). Among survivors, the median length of hospital admission in the flucytosine group was 11 days (IQR 8-15) versus 17 days (13-21) in the comparison group (p=0·0010).In-hospital mortality among patients treated with a flucytosine-containing regimen was comparable to reduced mortality reported in patients receiving a flucytosine-containing regimen in a recent multicentre African clinical trial. Flucytosine-based treatment can be delivered in routine care in a middle-income country with a substantial survival benefit.National Institute for Communicable Diseases, a Division of the National Health Laboratory Service.For the Zulu translation of the abstract see Supplementary Materials section.

Background Real-time PCR (qPCR) based methods, such as the Xpert MTB/RIF, are increasingly being used to diagnose tuberculosis (TB). While qualitative methods are adequate for diagnosis, the therapeutic monitoring of TB patients requires quantitative methods currently performed using smear microscopy. The potential use of quantitative molecular measurements for therapeutic monitoring has been investigated but findings have been variable and inconclusive. The lack of an adequate reference method and reference materials is a barrier to understanding the source of such disagreement. Digital PCR (dPCR) offers the potential for an accurate method for quantification of specific DNA sequences in reference materials which can be used to evaluate quantitative molecular methods for TB treatment monitoring. Methods To assess a novel approach for the development of quality assurance materials we used dPCR to quantify specific DNA sequences in a range of prototype reference materials and evaluated accuracy between different laboratories and instruments. The materials were then also used to evaluate the quantitative performance of qPCR and Xpert MTB/RIF in eight clinical testing laboratories. Results dPCR was found to provide results in good agreement with the other methods tested and to be highly reproducible between laboratories without calibration even when using different instruments. When the reference materials were analysed with qPCR and Xpert MTB/RIF by clinical laboratories, all laboratories were able to correctly rank the reference materials according to concentration, however there was a marked difference in the measured magnitude. Conclusions TB is a disease where the quantification of the pathogen could lead to better patient management and qPCR methods offer the potential to rapidly perform such analysis. However, our findings suggest that when precisely characterised materials are used to evaluate qPCR methods, the measurement result variation is too high to determine whether molecular quantification of Mycobacterium tuberculosis would provide a clinically useful readout. The methods described in this study provide a means by which the technical performance of quantitative molecular methods can be evaluated independently of clinical variability to improve accuracy of measurement results. These will assist in ultimately increasing the likelihood that such approaches could be used to improve patient management of TB. Electronic supplementary material The online version of this article (doi:10.1186/s12879-016-1696-7) contains supplementary material, which is available to authorized users.

Protocol for gDNA extraction and dPCR quantification of materials. (PDF 394 kb)

Method for restriction digestion of the TB Control Plasmid, dPCR analysis using the QuantStudio 3D platform, dPCR primers and thermal cycling conditions information, dPCR partition volume and partition number and mean λ values. Results from stability testing of the materials and analysis of BCG/ASM and Total MTB Control materials by Xpert MTB/RIF end-user laboratories including instrument and assay information, extraction and qPCR methods used by qPCR end user laboratories and their reported Cq values. (DOCX 114 kb)