Search

This paper proposes a novel blind adaptive array (BAA) interference suppression scheme incorporated with a time-domain symbol spreading (TISS). It can expand an operational region of BAA irrespective of input signal-to-interference power ratio (SIR) conditions. Independent component analysis (ICA) and constant modulus algorithm (CMA) are expected as the promising BAA approaches to suppress unknown interference which is extensively caused due to the small cell densification and spectrum superposing between a plurality of wireless communication systems. These BAA algorithms basically require an input SIR to be larger than 0 dB to suppress interference by capturing the desired signal appropriately. The proposed scheme applies TISS to the transmission signal for the desired user and then de-spreads it at the receiver side. It Gaussianizes statistical inherence of the interference signals and can bring beneficial effects; reducing the kurtosis for ICA as well as collapsing the constant envelope properties for CMA. Such intentional modification to the interference signals can improve the capture performance of the desired signal and realize its effective identification even at SIR < 0 dB. Its fundamental effectiveness is presented through various perspectives such as input SIR, symbol amount, and modulation orders.

We consider a UAV (Unmanned Aerial Vehicle) relay network whereby each UAV senses data and forwards it to dedicated ground stations by means of multi-hop relaying. In particular, we focus on a UAV relay network with a simple yet realistic linear topology for which we propose an adaptive direction control scheme to achieve a high throughput performance. In the proposed scheme, each UAV, equipped with multiple directional antennas, selects either the Decode-and-Forward (DF) straight relaying method or the orthogonal relaying method, for full-duplex data transfer, i.e., data is transmitted and received simultaneously on the same frequency, but at different antennas. The originality of our proposed method is to make each UAV rotate relatively to the position of its neighbouring UAVs, in order to optimize its antenna radiation direction, according to the selected relaying method. The key advantage of the proposed method is that signal direction can be controlled without the need of heavy adaptive signal processing as in conventional beamforming techniques. In order to clarify the decision parameters for selecting a relaying method, we first evaluate the throughput performance of the two-hop relay network under the severe interference conditions of UAV networks, and next, propose a procedure for selecting a multihop relaying method. Numerical experiments show that the proposed scheme enables to achieve a high throughput performance, with low computational costs.

Recently, the millimeter-wave band has been used in outdoor wireless communications to improve the frequency utilization efficiency. In this study, we propose a method to realize line-of-sight multiple-input multiple-output (LOS-MIMO) transmission independent of the transmitted distance using a two-dimensional (2-D) fixed antenna element arrangement, assuming millimeter-wave-band communication by small autonomous unmanned aerial vehicles. In conventional LOS-MIMO transmission with uniformly spaced antenna elements, the theoretical upper bound of the channel capacity is obtained, which decreases at a certain transmitted distance. Therefore, we focus on the fact that the propagation channel characteristics in pure LOS are geometrically determined by the transmitted distance, and consider the optimization of the arrangement of antenna elements. The element arrangement is fixed without using antenna selection from the viewpoint of system simplification. In addition, from the viewpoint of array size, we study the optimization corresponding to a 2-D element arrangement. The proposed method approximates the optimal arrangement from a vast number of 2-D element arrangements using a genetic algorithm. We evaluate the channel capacity characteristics of the proposed method by computer simulation and show that the characteristic degradation due to change in the transmitted distance in conventional LOS-MIMO transmission is improved. In addition, we evaluate a 4 × 4 MIMO transmission in an outdoor environment. The 4 × 4 MIMO propagation channel is also measured by an actual measurement equipment in the 66-GHz band and it is shown that the measured and calculated results agree with each other.

In this paper, a 20-GHz-band 64 x 64 hollow waveguide Butler matrix is proposed. By using two-plane short slot couplers and a modified diagram, a short-axis two dimensional Butler matrix is realized. The design method of the diagram and components is presented. The Butler matrix is composed of two plane hybrids, cross couplers and phase shifters. The designed Butler matrix is fabricated by milling and screwing together nine aluminum plates. The dimensions and weight are 86.40 mm x 74.19 mm x 396.34 mm and 7.0 kg, respectively. Transmission characteristics as a beam switching circuit are characterized by measurements, with a low insertion loss of less than 1.8 dB and an excitation error of 4-dB and 40-deg. standard deviation. Radiation characteristics as a 64-beam antenna are measured, and a wide coverage area of 40% of the hemisphere and high directivity of more than 18.7 dBi were determined by measurements.

This paper proposes interference-based decode and forward scheme that utilizes relay stations (RSs). In Long-Term-Evolution (LTE-) Advanced, heterogeneous networks in which femto- and picocells are overlaid onto macrocells are extensively discussed. However, interference between macro- and pico(femto)cells arises due to their different transmit power levels. Unlike conventional cooperative transmission schemes, the RS decodes interference in the first transmit timing period and forwards it to the user equipment (UE) in the second period. Moreover, cooperative transmission can be achieved without stopping the transmission from the base station (BS) to UE when forwarding the interference from the RS to the UE by utilizing the fact that signal-to-noise power ratio (SNR) between the RS and UE is much greater than that between the BS and UE. The basic performance of the proposed method is shown based on computer simulation. Moreover, the interference temperature and shadowing effect are measured when considering the coexistence between macro- and femtocells, and the performance of the proposed method is verified using measured shadowing effect.

As microcell wireless systems become more widespread, intercell interference among the access points will increase due to the limited frequency resource. In the overlapping cell scenario, radio resources should be shared by multiple cells. Although time and frequency resource sharing has been described in many papers, there is no detailed report on dynamic spatial resource sharing among multiple cells for microcell wireless systems. Thus, we present the effectiveness of spatial resource sharing among two access points. We introduce two scenarios based on the zero forcing method; one is the primary-secondary AP scenario and the other is the cooperative AP scenario. To evaluate the transmission performance of spatial resource sharing, channel matrices are measured in an indoor environment. The simulation results using the measured channel matrices show the potential of spatial resource sharing.