Search

Background Several neural interface technologies that stimulate and/or record from groups of axons have been developed. The longitudinal intrafascicular electrode (LIFE) is a fine wire that can provide access to a discrete population of axons within a peripheral nerve fascicle. Some applications require, or would benefit greatly from, technology that could provide access to multiple discrete sites in several fascicles. New method The distributed intrafascicular multi-electrode (DIME) lead was developed to deploy multiple LIFEs to several fascicles. It consists of several (e.g. six) LIFEs that are coiled and placed in a sheath for strength and durability, with a portion left uncoiled to allow insertion at distinct sites. We have also developed a multi-lead multi-electrode (MLME) management system that includes a set of sheaths and procedures for fabrication and deployment. Results A prototype with 3 DIME leads was fabricated and tested in a procedure in a cadaver arm. The leads were successfully routed through skin and connective tissue and the deployment procedures were utilized to insert the LIFEs into fascicles of two nerves. Comparison with existing method(s) Most multi-electrode systems use a single-lead, multi-electrode design. For some applications, this design may be limited by the bulk of the multi-contact array and/or by the spatial distribution of the electrodes. Conclusion We have designed a system that can be used to access multiple sets of discrete groups of fibers that are spatially distributed in one or more fascicles of peripheral nerves. This system may be useful for neural-enabled prostheses or other applications.

Electroretinographic recordings were made from hatchling loggerhead and leatherback sea turtle eyecup preparations during presentation of sinusoidally modulated lights of different frequencies, mean intensities and colors. Cross-correlation analysis was performed to determine the extent to which the responses followed the intensity modulated light sources. For both species mean light intensity had no significant effect on the frequency modulated responses over a 1.5 log unit range of intensities. Both species showed the best following to blue light and the poorest tracking to red light. Leatherback retinas did not follow frequencies above 10 Hz, while loggerhead responses extended out to 15 Hz. These visual low pass filter characteristics are consistent with attributes of the visual ecology of each species, as well as with the latencies and slow rise times exhibited by these retinas to brief flashes of light.

Electroretinographic recordings were made from hatchling loggerhead and leatherback sea turtle eyecup preparations to generate dark-adapted spectral sensitivity curves. Both species were maximally sensitive to wavelengths between 500 and 540 nm, with a secondary peak near 380 nm. The spectral sensitivity curve for leatherbacks was attenuated at the long wavelength end of the spectrum relative to that of the loggerheads. This difference may reflect adaptations to lighting available at the relatively shallow (loggerhead) versus deeper (leatherback) sites where each species forages. The broad spectrum of wavelengths detected by both species (near UV to yellow–orange) indicates that vision is likely mediated by more than one photopigment, potentially rendering these turtles capable of color vision.

The impedance method has been used extensively to calculate induced electric fields and currents in tissue as a result of applied electromagnetic fields. However, there has previously been no known method for an a priori assessment of the numerical accuracy of the results found by this method. Here, we present a method which permits an a priori assessment of the numerical accuracy of the impedance method applied to physiologically meaningful problems in bioengineering. The assessment method relies on estimating the condition number associated with the impedance matrix for problems with varying shapes, sizes, conductivities, anisotropies, and implementation strategies. Equations have been provided which predict the number of significant figures lost due to poor matrix conditioning as a function of these variables. The results show that, for problems of moderate size and uncomplicated geometry, applied fields should be measured or calculated accurately to at least five or six significant figures. As resolutions are increased and material properties are more widely divergent even more significant figures are needed. The equations provided here should ensure that solutions found from the impedance method are calculated accurately.

A cylindrical multielectrode system specifically designed for intraspinal microstimulation was mechanically and electrically evaluated in the ventral horn of the feline lumbo-sacral spinal cord. Electrode insertions proved to be straight as evaluated from radiographs. Impedances were measured in situ and force recruitment curves from quadriceps muscles were collected over a wide range of stimulus parameters. For a given charge, higher current amplitudes produced greater forces than proportionally longer pulse durations, indicating that charge is not the sole indicator of evoked force in applications utilizing electrical stimulation. Overlap measurements for calculating current-distance constants were collected at a variety of current amplitudes, electrode pair separations, and pair orientations in the spinal grey matter. Forces obtained in the majority of these trials demonstrated an order effect, presumably due to asymmetric neuronal connectivity within the spinal cord. In the cases showing no order effect, the dorso-ventral electrode pair orientation yielded a higher average current-distance constant (278 /spl mu/A/mm/sup 2/) than either the medio-lateral or rostro-caudal electrode pair orientations (197 /spl mu/A/mm/sup 2/). Specifications of an array of cylindrical multielectrodes for use in future intraspinal microstimulation prostheses were updated.

Much has been studied and written about plastic changes in the CNS of humans triggered by events such as limb amputation. However, little is known about the extent to which the original pathways retain residual function after peripheral amputation. Our earlier, acute study on long-term amputees indicated that central pathways associated with amputated peripheral nerves retain at least some sensory and motor function. The purpose of the present study was to determine if these functional connections would be strengthened or improved with experience and training over several days time. To do this, electrodes were implanted within fascicles of severed nerves of long-term human amputees to evaluate the changes in electrically evoked sensations and volitional motor neuron activity associated with attempted phantom limb movements. Nerve stimulation consistently resulted in discrete, unitary, graded sensations of touch/pressure and joint-position sense. There was no significant change in the values of stimulation parameters required to produce these sensations over time. Similarly, while the amputees were able to improve volitional control of motor neuron activity, the rate and pattern of change was similar to that seen with practice in normal individuals on motor tasks. We conclude that the central plasticity seen after amputation is most likely primarily due to unmasking, rather than replacement, of existing synaptic connections. These results also have implications for neural control of prosthetic limbs.

We compared activity, diving behavior and response to prey by Dermochelys coriacea and Chelonia mydas during their first 8–10 weeks of development. We reared juveniles in the laboratory and, at two-week intervals, released them in the ocean for a brief trial. Each turtle towed a device used to measure its dive profile. All turtles swam throughout their trials, but D. coriacea swam more slowly than C. mydas. Dermochelys coriacea dives had V-shaped profiles and older turtles made longer and deeper (up to 18 m) dives than younger turtles. Chelonia mydas dives were usually shallow (

We describe new manufacturing techniques and physical properties of an improved polymer-based longitudinal intrafascicular electrode (polyLIFE). Modifications were made to correct: (1) poor metal film adhesion and fatigue resistance, (2) inconsistent insulation adhesion and control over recording/stimulation zone length, and (3) insufficient tensile strength for clinical use. Metal adhesion was significantly improved by both plasma treatment and fiber rotation (about the long axis) during metal deposition. Fatigue resistance was improved by reduction in sputtering energy (time x power) combined with long axis rotation, resulting in thin metal films that were 250 times more resistant to cyclic bending fatigue. Insulation adhesion was enhanced with the application of an adhesion-promoting silicone (MED2-4013, Nusil), while the recording/stimulation zone length was controlled to 1 +/- 0.2mm (mean +/- S.D.). The polyLIFE was made more robust by the inclusion of three individually metallized fibers, improving its tensile strength by a factor of 4 while producing minimal changes to its overall stiffness. However, the metallized fiber redundancy did not significantly affect fatigue resistance. The manufacturing changes described in this study enable the construction of more mechanically robust polyLIFEs, which should provide greater success when chronically implanted in peripheral nerves.

Objective A neural interface system has been developed that consists of an implantable stimulator/recorder can with a 15-electrode lead that trifurcates into three bundles of five individual wire longitudinal intrafascicular electrodes. This work evaluated the mechanical fatigue resistance of the branched lead and distributed electrode system under conditions designed to mimic anticipated strain profiles that would be observed after implantation in the human upper arm. Approach Custom test setups and procedures were developed to apply linear or angular strain at four critical stress riser points on the lead and electrode system. Each test was performed to evaluate fatigue under a high repetition/low amplitude paradigm designed to test the effects of arm movement on the leads during activities such as walking, or under a low repetition/high amplitude paradigm designed to test the effects of more strenuous upper arm activities. The tests were performed on representative samples of the implantable lead system for human use. The specimens were fabricated using procedures equivalent to those that will be used during production of human-use implants. Electrical and visual inspections of all test specimens were performed before and after the testing procedures to assess lead integrity. Main results Measurements obtained before and after applying repetitive strain indicated that all test specimens retained electrical continuity and that electrical impedance remained well below pre-specified thresholds for detection of breakage. Visual inspection under a microscope at 10× magnification did not reveal any signs of damage to the wires or silicone sheathing at the stress riser points. Significance These results demonstrate that the branched lead of this implantable neural interface system has sufficient mechanical fatigue resistance to withstand strain profiles anticipated when the system is implanted in an arm. The novel test setups and paradigms may be useful in testing other lead systems.

Polymer-based longitudinal intrafascicular electrodes (polyLIFEs) were chronically implanted into the sciatic nerve of white New Zealand rabbits (n=8) for a period of 6 months (hereafter referred to as the long-term group). The impact of the implantation procedure, as observed 6 months post surgery, was evaluated in a sham-treated control group (n=9). The contralateral sciatic nerve served as the control for each animal. Nerve-fiber counts, fiber diameters, and myelin thickness were estimated at the level of the implant site, 1.5 cm proximally, and 1.5 cm distally for both nerves in sham-treated and long-term groups. Implantation of polyLIFEs had no significant effect on fiber counts, nerve-fiber diameter, or myelin thickness. A slight increase in connective tissue in the vicinity of the implant site was evident in the long-term group, including a thin but dense capsule immediately surrounding the implanted electrode.

Selective activation of muscle groups in the feline hindlimb by electrical stimulation of the ventral lumbo-sacral spinal cord was investigated. Spinal cord segments L5 to S1 were mapped using a penetrating tungsten needle electrode. Locations that produced isolated contraction of quadriceps, tibialis anterior or triceps surae/plantaris muscles when stimulated with a current of 40 /spl mu/A or less, and in which spread of activity to other muscles was not detected after increasing the stimulus to at least twice the threshold level, were defined as belonging to the target muscle's "activation pool." The quadriceps activation pool was found to extend from the beginning of L5 to the middle of L6. The tibialis anterior activation pool extended from the beginning of L6 to the middle of L7, and the triceps surae/plantaris activation pool extended from the caudal end of L6 to the beginning of S1. The three activation pools were located in Rexed motor lamina IX and their spatial organization was found to correspond well with that of the anatomically defined motor pools innervating the same muscles. The spatial and functional segregation of motor pools manifested at the spinal cord level can have direct applications in the areas of functional electrical stimulation and motor control.

A kinematic model of the human long finger and the six muscles that actuate it is presented. The model transforms finger pose into estimates of muscle excursions and fingertip location. The effects of abduction/adduction about the metacarpo-phalangeal joint are accounted for, as are the effects of flexion of the three finger joints. A set of parameters are provided which approximate kinematics of the segments and muscles of a cadaver finger over the range of finger poses humans normally assume.

We implanted polymer-based longitudinal intrafascicular electrodes (polyLIFEs) in feline dorsal rootlets acutely and for periods of two to six months to evaluate their electrical properties and biocompatibility. A total of 38 implanted electrodes were analyzed. Some 25 of the 38 electrodes were implanted with an insulative flexible polymer cuff, which was required for recording of afferent activity in situ. Electrode impedances remained stable for the duration of the experiments. The distributions of axons were measured at three levels of the implanted rootlets: the implant level, 1–2 mm proximal to the implant with respect to the cell body, and 1–2 mm distal to the implant with respect to the cell body. Similar measurements were made in five samples of fascicles neighboring an implant and six samples of control tissue from animals in which no implants were placed. The polyLIFEs demonstrated a high degree of biocompatibility, as no adverse effects on axon size were observed in either the implanted fascicle or neighboring neural tissue. However, the insulative cuffs were found to be a source of compression, resulting in necrosis of the neural tissue. © 1998 Biomedical Engineering Society.

The goal of the study was to provide specifications for a stimulating electrode array to be implanted in the lumbosacral spinal cord as part of a functional neuromuscular stimulation (FNS) system for control of lower extremity muscles in paralyzed individuals. Dual channel stimulation of the quadriceps activation pool in the feline ventral lumbo-sacral spinal cord was performed to measure electrode interactions and to explore the effect of various stimulation paradigms on muscle fatigue. There was no measurable overlap in the populations of motor neurons activated from 2 different electrodes for spacings /spl ges/1 mm with currents below 100 /spl mu/A. However, a statistically significant increase in the population of activated fibers due to current summation was observed when stimuli /spl ges/70 /spl mu/A. were simultaneously presented through pairs of electrodes within 3 mm of each other. Fatigue effects were studied with 3 paradigms: (1) stimuli were delivered through a single electrode, (2) stimuli were delivered through 2 electrodes with the stimulus to the second electrode presented during the refractory period of fibers stimulated by the first electrode, and (3) stimuli were interleaved between the 2 electrodes such that the stimulus to 1 electrode was presented midway between stimuli to the other electrode, and the rate of stimulation through a single electrode was half that used in the first 2 paradigms. During channel refractory and single channel stimulation did not differ from each other in the rate at which the muscle fatigued, in both cases the force decayed to 30% of its initial level within 2 min of the initiation of the stimulation regime, whereas the force with interleaved stimulation was still above the initial force at this time due to strong potentiation. Based on these results and on and activation pool dimensions obtained in an earlier study, preliminary specifications are presented for an electrode array to be implanted in the human spinal cord for functional neuromuscular stimulation.

This paper describes a closed-loop functional neuromuscular stimulation system that uses afferent neural activity from muscle spindle fibers as feedback for controlling position of the ankle joint. Ankle extension against a load was effected by neural stimulation through a dual channel intrafascicular electrode of a fascicle of the tibial nerve that innervated the gastrocnemius muscle. Ankle joint angle was estimated from recordings of tibialis anterior and lateral gastrocnemius spindle fiber activity made with dual channel intrafascicular electrodes. Experiments were conducted in neurally intact anesthetized cats and in unanesthetized decerebrate cats to demonstrate the feasibility of this system. The system was able to reach and maintain a fixed target ankle position in the presence of a varying external moment ranging in magnitude between 7.3 and 22 N-cm opposing the action of the ankle extensor, as well as track a sinusoidal target ankle position up to a frequency of 1 Hz in the presence of a constant magnitude 22- or 37-N-cm external moment.

The limits of present electrode technology are being reached in current motor prostheses for restoring functional movement in paralyzed people. Improved devices require electrodes and stimulation methods that will activate muscles selectively and independently with less implanted hardware. A practical functional neuromuscular stimulation (FNS) system may need to employ extraneural, intraneural, epimysial, or intramuscular electrodes or a combination of these types. The limitations of current muscle electrodes and the anatomy of peripheral nerve innervation of muscle have pointed to stimulation of peripheral nerve trunks as a promising area for investigation. Attempts to use conventional (extraneural) peripheral nerve electrodes for selective activation of muscles in chronic applications have met with only limited success. Intraneural (intrafascicular) electrodes offer the advantages of greater selectivity and lower power requirements, but these may be offset by the difficulty of inserting delicate electrodes through the collagenous epineurium and perineurium while avoiding unacceptable amounts of trauma. Cuff electrodes require more power than intrafascicular ones but may provide more stable recruitment patterns over time, and the opportunity for retrieval and replacement. >

Trans-radial amputee subjects were implanted with intrafascicular electrodes in the stumps of the median and ulnar nerves. Electrical stimulation through these electrodes was used to provide sensations of touch and finger position referred to the amputated hand. Two subjects were asked to identify different objects as to size and stiffness by manipulating them with a myo-electric hand without visual or auditory cues. Both subjects were provided with information about contact force with the objects via tactile sensations referred to their phantom hands. One subject, who was provided with information about finger position in the prosthetic hand via a different tactile sensation referred to his phantom hand, was unable to correctly identify the objects. The other subject, who received information about finger position via a proprioceptive sensation referred to his phantom hand, correctly identified the objects at a level statistically significantly above chance performance.

The purpose of this study was to define the testing parameters that are most sensitive to sensory loss in carpal tunnel syndrome and then to track recovery of these sensations postoperatively. Two dozen patients underwent standard nerve decompression and were subsequently re-evaluated at six weeks, three months, and six months. The test battery included provocative maneuvers, light-touch threshold determined by manually applied monofilaments and skin indentation with the Automated Tactile Tester (ATT), manual two-point discrimination, manual high-frequency vibration and ATT low-frequency vibration, and ATT warmth detection. The most sensitive indicators of sensory abnormality were the ATT low-frequency vibration and skin indentation tests. Responses to all but these two tests returned to normal within two months postoperatively. The ATT indentation and vibration tests showed continual improvement over the study period, returning to nearly normal values by six months. Recommendations concerning the use of automated methods for testing sensory function are made in light of these findings.

The Automated Tacticle Tester (ATT) is a computer-controlled device designed to measure patients' cutaneous perception of touch, vibration, temperature, and pain. The ATT provides repeatable and precise control of the amplitude, rate of application, and duration of stimuli. Threshold values for skin indentation (touch), high- and low-frequency vibration, pinprick (sharpness), warmth, and two-point discrimination were obtained with the ATT from the fingers of 62 normal subjects. Manual monofilament and two-point discrimination tests were also performed on the same subjects. All the tests with the ATT, except pinprick, showed a statistically significant increase in threshold with age. There were no significant differences attributable to the hand or digit tested or the sex of the subject. These data were used to derive age-adjusted criteria for normal sensory function in the glabrous skin of the fingers. Thresholds were found to remain within normal limits when these subjects were retested at various time intervals. We conclude that the ATT provides repeatable and reliable measurements of sensory function in the skin and has potential application in the diagnosis and evaluation of compression and other peripheral neuropathies.

A visual prosthesis for the blind using electrical stimulation of the visual cortex will require the development of an array of electrodes. Passage of current through these electrodes is expected to create a visual image made up of a matrix of discrete phosphenes. The quality of the visual sense thus provided will be a function of many parameters, particularly the number of electrodes and their spacing. We are conducting a series of psychophysical experiments with a portable "phosphene" simulator to obtain estimates of suitable values for electrode number and spacing. The simulator consists of a small video camera and monitor worn by a normally sighted human subject. To simulate a discrete phosphene field, the monitor is masked by an opaque perforated film. The visual angle subtended by images from the masked monitor is 1.7 degrees or less, depending on the mask, and falls within the fovea of the subject. In the study presented here, we measured visual acuity as a function of the number of pixels and their spacing in the mask. Visual acuity was inversely proportional to pixel density, and trained subjects could achieve about 20/26 visual acuity with a 1024 pixel image. We conclude that 625 electrodes implanted in a 1 cm by 1 cm area near the foveal representation of the visual cortex should produce a phosphene image with a visual acuity of approximately 20/30. Such an acuity could provide useful restoration of functional vision for the profoundly blind.

Psychophysical and electrophysiological techniques were used to study the encoding and processing of information about the frequency content of vibrational stimuli applied to glabrous skin in humans and cats. Trained human subjects were asked to discriminate changes in stimulus frequency and harmonic content for pairs of mono- and diharmonic sinusoidal vibrations applied to the fingertips. These psychophysical tests supplied data on what information is available to the central nervous system about the frequency components of vibratory stimuli. Electrophysiological recordings from nerves innervating the glabrous skin of the paw in cats during presentation of the same stimuli used in the psychophysical study provided data on how the peripheral nervous system encodes information about the physical parameters of cutaneous vibratory stimuli. The two sets of data indicated that the subjects derived information about the frequency of vibrotactile stimuli from the mean interval between action potentials in afferent nerve fibers activated by the stimulus.

We have studied muscle recruitment with Teflon-insulated, 25 microns diameter, Pt-Ir intrafasicular electrodes implanted in nerves innervating the gastrocnemius and soleus muscles of cats. The purpose of this study was to measure the performance of these bipolar electrodes, which had been designed to optimize their ability to record unit activity from peripheral nerves, as stimulating electrodes. Recruitment curves identified the optimal stimulus configuration as a biphasic rectangular pulse, with an interphase separation of about 500 microseconds and a duration of about 50 microseconds. The current required for a half-maximal twitch contraction was on the order of 50 microA. Current and charge densities needed for stimulation were well below levels believed to be safe for the tissue and electrode materials involved. When the spinal reflex pathway was interrupted by crushing the nerve, the force produced by a given stimulus changed in some cases, but not in others, implying that the spinal reflex contribution was not the same in all the implants. We conclude that intrafascicular recording electrodes are also a potentially valuable technology for functional neuromuscular stimulation, and warrant further development.

A biodegradable tube consisting of alternating laminae of aldehyde and heat-treated collagen and fibrin was tested as a nerve repair device. Tubes placed around intact nerves for 3 weeks showed a high degree of biocompatibility as evidenced by the absence of reactive or toxic alterations of epineurium contacting the implant and the presence of normal perineurial and endoneurial components. Tubes used to bridge a 5 mm gap in the rat tibial nerve showed good vascularization of the collagen laminae, a well-confined nerve regenerate, and advanced resorption of the fibrin component at 3 months. One year after being used to bridge 5-12 mm gaps in the cat radial and saphenous nerves, the tubes were replaced by well-vascularized connective tissue which surrounded a dense nerve regenerate. However, inadequate stabilization of the implants by the small anchoring sutures apparently caused some of the repairs to fail. In sum, the implants appear to promote regeneration of axons across a nerve gap by providing an oriented, well-vascularized physical substrate for neurite outgrowth.

Nerve stimulation typically employs charge-balanced current injection with a delay between the cathodal and anodal phases. Typically these waveforms are produced using a microprocessor. However, once appropriate stimulus parameters are chosen, they tend to remain fixed within an application, making computational power unnecessary. In such cases, it would be advantageous to replace the microprocessor with integrated circuitry and hardware controls for maintaining fixed pulse parameters. We describe here an architecture that generates controllable charge-balanced pulses but requires no computer processing components. The circuitry has been engineered such that minimum size and power consumption can be achieved when fabricated into an IC chip, making it ideal for many long term, portable nerve stimulation devices and applications.

Background Earlier observations in our lab had indicated that large, time-varying magnetic fields could elicit action potentials that travel in only one direction in at least some of the myelinated axons in peripheral nerves. The objective of this study was to collect quantitative evidence for magnetically induced unidirectional action potentials in peripheral nerves of human subjects. A magnetic coil was maneuvered to a location on the upper arm where physical effects consistent with the creation of unidirectional action potentials were observed. Electromyographic (EMG) and somatosensory evoked potential (SEP) recordings were then made from a total of 20 subjects during stimulation with the magnetic coil. Results The relative amplitudes of the EMG and SEP signals changed oppositely when the current direction in the magnetic coil was reversed. This effect was consistent with current direction in the coil relative to the arm for all subjects. Conclusion A differential evocation of motor and sensory fibers was demonstrated and indicates that it may be possible to induce unidirectional action potentials in myelinated peripheral nerve fibers with magnetic stimulation.

The ability to noninvasively and reversibly block conduction in peripheral nerves would have several clinical applications. As an initial step in this direction, we investigated the possibility of magnetically generating and differentially blocking activity in mammalian peripheral nerve fibers in vitro. Compound action potentials at each end of individual explanted phrenic nerves were recorded in response to currents induced at the midpoint of the nerve with an externally placed magnetic coil. Current in the coil was then reversed and the recordings repeated. In all cases, the area under the compound action potential on the virtual anode side of the magnetic stimulus was reduced (mean of 18.2 +/- 8.8%) in comparison to the area on the virtual cathode side. This indicates that peripheral nerve activity can be differentially induced by magnetic stimulation. Extension of this effect to the point of generating unidirectional action potentials in vivo may prove clinically useful in a number of contexts, such as reducing contractures secondary to spasticity and generating magnetically induced anesthesia in limbs. Further investigations of this effect seem warranted.

The effects of spinal cord injuries are likely to be ameliorated with the help of functional electrical stimulation of the spinal cord, a technique that may benefit from a new style of electrode: the cylindrical multielectrode. This paper describes the specifications for, fabrication techniques for, and in vitro evaluation of cylindrical multielectrodes. Four tip shapes were tested to determine which shape required the lowest peak force and would, therefore, be expected to minimize dimpling during implantation. The impedance of the electrode interface was monitored for changes due to insertion as well as repetitive delivery of current pulses. The charge delivery capacity was determined by testing with safe (/spl ges/0.6 mC/cm/sup 2/) and damaging levels (/spl ges/0.8 mC/cm/sup 2/) of charge density. The results of these tests suggest that this electrode design could be used to stimulate neurons in the ventral horn of the spinal cord.

Evidence indicates that user acceptance of modern artificial limbs by amputees would be significantly enhanced by a system that provides appropriate, graded, distally referred sensations of touch and joint movement, and that the functionality of limb prostheses would be improved by a more natural control mechanism. We have recently demonstrated that it is possible to implant electrodes within individual fascicles of peripheral nerve stumps in amputees, that stimulation through these electrodes can produce graded, discrete sensations of touch or movement referred to the amputee's phantom hand, and that recordings of motor neuron activity associated with attempted movements of the phantom limb through these electrodes can be used as graded control signals. We report here that this approach allows amputees to both judge and set grip force and joint position in an artificial arm, in the absence of visual input, thus providing a substrate for better integration of the artificial limb into the amputee's body image. We believe this to be the first demonstration of direct neural feedback from and direct neural control of an artificial arm in amputees.

We are proposing to build a visual prosthesis based upon electrical stimulation of the visual cortex via an array of penetrating electrodes. To establish design specifications for the prosthesis we have conducted psychophysical experiments with a portable phosphene simulator. The simulator consists of a small video camera and monitor masked with an array of 63.5 pm diameter pinholes. The visual fizld of the monitor covers 1.7 degrees and falls within the fovea of the subject. The total number of phosphenes, their spacing, and the field magnification ratio can be varied. Subjects can achieve about 20130 visual acuity with a 1024 pixel image. Visual acuity is approximately an inverse linear function of pixel density.

Our Department of Bioengineering has instituted a pilot program aimed at helping a select group of highly qualified students obtain both bachelor's and master's degrees in an accelerated timeframe - approximately four years from the beginning of their university studies. A key element of this program is the introduction of the students to research in their second year of studies via a directed and closely supervised cohort mechanism. These students also come to the university with substantial AP credit and spend two summers fulfilling some general education requirements of the university. Our first three years with the program have shown positive results, with most students on track in both academics and research. There have been some challenges, however, with regard to tight scheduling, leaves for religious missions, and continued student stipend funding.

This paper reviews behavioral, physiological, anatomical, and ecological aspects of sound and vibration detection by decapod crustaceans. Our intent is to demonstrate that despite very limited work in this area in the past 20 years, evidence suggests that at least some decapod crustaceans are able to detect and use sounds in ways that parallel detection and processing mechanisms in aquatic and terrestrial vertebrates. Some aquatic decapod crustaceans produce sounds, and many are able to detect substrate vibration at sensitivities sufficient to tell of the proximity of mates, competitors, or predators. Some semi-terrestrial crabs produce and use sounds for communication. These species detect acoustic stimuli as either air- or substrate-borne energies, socially interact in acoustic "choruses," and probably use "calls" to attract mates.

Purpose It is not known whether motor and sensory pathways associated with a missing or denervated limb remain functionally intact over periods of many months or years after amputation or chronic peripheral nerve transection injury. We examined the extent to which activity on chronically severed motor nerve fibers could be controlled by human amputees and whether distally referred tactile and proprioceptive sensations could be induced by stimulation of sensory axons in the nerve stumps. Methods Amputees undergoing elective stump procedures were invited to participate in this study. Longitudinal intrafascicular electrodes were threaded percutaneously and implanted in severed nerves of human amputees. The electrodes were interfaced to an amplifier and stimulator system controlled by a laptop computer. Electrophysiologic tests were conducted for 2 consecutive days after recovery from the surgery. Results It was possible to record volitional motor nerve activity uniquely associated with missing limb movements. Electrical stimulation through the implanted electrodes elicited discrete, unitary, graded sensations of touch, joint movement, and position, referring to the missing limb. Conclusions These findings indicate that both central and peripheral motor and somatosensory pathways retain significant residual connectivity and function for many years after limb amputation. This implies that peripheral nerve interfaces could be used to provide amputees with prosthetic limbs that have more natural feel and control than is possible with current myoelectric and body-powered control systems.

In response to the need for providing advanced engineering education in a shorter time period than is currently possible by traditional curricula, we have created an Accelerated Dual Degree program in biomedical engineering. The purpose of this pilot program is to attract the brightest students, get them involved in a research project at an early stage, and provide them with an intensive four-year educational program built around a cohort environment. Upon completion of the program, the students will receive a BS degree in biomedical engineering and an MS degree in bioengineering.

The authors implanted 11 polymer-based intrafascicular electrodes into the peroneal and/or tibial branches of the right sciatic nerve in 8 New Zealand white rabbits for a period of 6 months where the contralateral limb served as the control. The fiber diameter distributions, myelin thickness, and axon counts were measured at the level of the implant, 1.5 cm proximally, and 1.5 cm distally. PolyLIFEs caused no significant effect on axon counts or diameter, but induced slight demyelination distal to the implant. Encapsulation of the implants was also minimal.

Intrafascicular electrodes have been implanted in peripheral nerves of cats and have recorded neural activity from a small population of nerve fibers for as long as six months, suggesting that these electrodes can be used on a chronic basis to acquire information about limb position, muscle force and skin contact. Preliminary results suggest that the activity of a small population of nerve fibers can be reliably monitored on a long-term basis using intrafascicular electrodes. They appear to cause little or no permanent damage and so may be suitable for use in an functional neuromuscular stimulation feedback system. >

Threshold level, sinusoidal stimuli are used to elicit phase-locked activity from cutaneous mechanoreceptors selectively, for the purpose of evaluating single-unit activity in multiunit peripheral nerve recordings. Each receptor is characterized by its response to a range of mechanical stimuli and by the size and location of its receptive field. This information is used to determine the number and type of units present in multiunit recordings made with chronically implanted electrodes and to follow the presence of the units in the recordings over time. This approach can be used with any type of composite neural recording in which units can be selectively activated and classified. >

The authors are exploring alternatives to Pt/Ir wire for constructing ultra-flexible neural intrafascicular electrodes suitable for chronic implantation. In this study the authors measured the flexural properties of several kinds of fine metal wires and conducting polymer fibers. The fibers were made either of intrinsically conductive polymers (polyaniline, polythiophene) or good mechanical polymers (nylon, Kevlar). The latter were made conductive through sputter coating with a thin layer of platinum. While the fiber flexibility (moment required for a 7.5/spl deg/ deflection) of the nylon and Kevlar fibers ranged from 10-35 /spl mu/g-cm, some 50 to 150 times less stiff than Pt/Ir wire, their tensile strengths were approximately equal to that of Pt/Ir wire. Polymer fibers represent promising materials for ultra-flexible nerve electrodes. >

Describes a closed loop control system that uses afferent neural activity from muscle spindle fibers as feedback for controlling ankle position. The gastrocnemius muscle was stimulated through a dual channel intrafascicular electrode implanted in a fascicle of the tibial nerve. Dual channel intrafascicular electrodes were also used to record spindle fiber activity from the tibialis anterior and the lateral gastrocnemius muscles to estimate ankle joint angle. Experiments were conducted in neurally intact anesthetized cats and in unanesthetized decerebrate cats to demonstrate the feasibility of this control scheme. >

Uses a biomechanical model of the human long finger to determine whether the extrinsic muscles are better suited for estimating the finger's joint angles or for estimating the location of the finger tip. We found that two of the extrinsic muscles together could provide sufficient information to directly determine the location of the finger tip relative to the metacarpophalangeal (MCP) joint, without having to determine any of the finger's joint angles. We also found that for some finger positions the extrinsic muscles provide ambiguous information about the finger's joint angles. These results suggest that the biomechanics of the finger and the extrinsic muscles lend themselves more readily to a determination of finger tip location than to a determination of joint angles. In light of these results, it seems possible that human proprioception in the hand may reflect a sense of finger tip location, not joint angles.

Polymer-based longitudinal intrafascicular electrodes (polyLIFEs) were chronically implanted into the sciatic nerve of white New Zealand rabbits (n=8) for a period of 6 months (hereafter referred to as the long-term group). The impact of the implantation procedure, as observed 6 months post surgery, was evaluated in a sham-treated control group (n=9). The contralateral sciatic nerve served as the control for each animal. Nerve-fiber counts, fiber diameters, and myelin thickness were estimated at the level of the implant site, 1.5 cm proximally, and 1.5 cm distally for both nerves in sham-treated and long-term groups. Implantation of polyLIFEs had no significant effect on fiber counts, nerve-fiber diameter, or myelin thickness. A slight increase in connective tissue in the vicinity of the implant site was evident in the long-term group, including a thin but dense capsule immediately surrounding the implanted electrode.