Search

Semiconductor lasers play critical roles in many different systems, ranging from optical communications to absorption spectroscopy for environmental monitoring. Despite numerous applications, many semiconductor lasers have problems such as significant beam divergence and polarization instability. External optical elements like objective lenses and polarizers are usually needed to address these issues. This Review will discuss how these issues have recently been dealt with by instead integrating metasurfaces into semiconductor lasers. This necessitates the development of innovative fabrication methods; these will also be the topic of this Review. Metasurfaces can be integrated on the emitting facet of a laser. This can help select the lasing mode or can be used just to modify the output beam properties without affecting the modes. They can also be integrated monolithically with lasers through waveguides, or work in an external cavity configuration. These integrated devices provide novel optical functions, such as direct orbital angular momentum (OAM) mode generation, wavelength tuning and holographic pattern generation. We hope this Review will help extend the use of metasurface-integrated semiconductor lasers to scientific and industrial systems that employ lasers.

Intrinsic and extrinsic strains are leveraged to synthesise vanadium oxide complexes that undergo IMT near room temperature. The complexes are studied and used to modulate the IR radiation of a hot object as a proof-of-concept application.

The self-terminated, layered structure of van der Waals materials introduces fundamental advantages for infrared (IR) optoelectronic devices. These are mainly associated with the potential for low noise while maintaining high internal quantum efficiency when reducing IR absorber thicknesses. In this study, we introduce a new van der Waals material candidate, zirconium germanium telluride (ZrGeTe4), to a growing family of promising IR van der Waals materials. We find the bulk form ZrGeTe4 has an indirect band edge around ∼0.5 eV, in close agreement with previous theoretical predictions. This material is found to be stable up to 140 °C and shows minimal compositional variation even after >30 days storage in humid air. We demonstrate simple proof-of-concept broad spectrum photodetectors with responsivities above 0.1 AW-1 across both the visible and short-wave infrared wavelengths. This corresponds to a specific detectivity of ∼109 cm Hz1/2 W-1 at λ = 1.4 μm at room temperature. These devices show a linear photoresponse vs illumination intensity relationship over ∼4 orders of magnitude, and fast rise/fall times of ∼50 ns, also verified by a 3 dB roll-off frequency of 5.9 MHz. As the first demonstration of photodetection using ZrGeTe4, these characteristics measured on a simple proof-of-concept device show the exciting potential of the ZrGeTe4 for room temperature IR optoelectronic applications.

Room-temperature optoelectronic devices that operate at short-wavelength and mid-wavelength infrared ranges (one to eight micrometres) can be used for numerous applications1-5. To achieve the range of operating wavelengths needed for a given application, a combination of materials with different bandgaps (for example, superlattices or heterostructures)6,7 or variations in the composition of semiconductor alloys during growth8,9 are used. However, these materials are complex to fabricate, and the operating range is fixed after fabrication. Although wide-range, active and reversible tunability of the operating wavelengths in optoelectronic devices after fabrication is a highly desirable feature, no such platform has been yet developed. Here we demonstrate high-performance room-temperature infrared optoelectronics with actively variable spectra by presenting black phosphorus as an ideal candidate. Enabled by the highly strain-sensitive nature of its bandgap, which varies from 0.22 to 0.53 electronvolts, we show a continuous and reversible tuning of the operating wavelengths in light-emitting diodes and photodetectors composed of black phosphorus. Furthermore, we leverage this platform to demonstrate multiplexed nondispersive infrared gas sensing, whereby multiple gases (for example, carbon dioxide, methane and water vapour) are detected using a single light source. With its active spectral tunability while also retaining high performance, our work bridges a technological gap, presenting a potential way of meeting different requirements for emission and detection spectra in optoelectronic applications.

Black phosphorus (bP), a two-dimensional (2D) layered material, has shown great potential for infrared (IR) optoelectronics owing to the narrow and direct bandgap it exhibits when in multilayer form. However, its thinness and optical anisotropy lead to weak light absorption, which limits the performance of bP-based photodetectors. In this work, we explore plasmonic nanoantennas, optical cavities, and their hybrids that can be integrated with multilayer bP to enhance its light absorption. This is achieved by near-field light intensity enhancement and polarization conversion. In addition, we demonstrate that these nanostructures can boost the spontaneous emission from bP. Light absorption enhancements of up to 185 and 16 times are obtained for linearly polarized and unpolarized IR light, respectively, in comparison with a commonly used device architecture (bP on SiO2/Si). Moreover, IR light emission enhancements of up to 18 times are achieved. The optical nanostructures presented here can be exploited for enhancing the detectivity of photodetectors and electroluminescence efficiency of light-emitting diodes based on bP and other 2D materials.

Metasurface-based holography presents opportunities for applications that include optical displays, data storage, and optical encryption. Holograms that control polarization are sometimes referred to as vectorial holograms. Most studies on this topic have concerned devices that display different images when illuminated with different polarization states. Fewer studies have demonstrated holographic images whose polarization varies spatially, i.e., as a function of the position within the image. Here, we experimentally demonstrate a vectorial hologram that produces an image with a spatially continuous distribution of polarization states, for the first time to our knowledge. An unlimited number of polarization states can be achieved within the image. Furthermore, the holographic image and its polarization map (polarization vs position in image) are independent. The same image can be thus encoded with different polarization maps. As far as we know, our approach is conceptually new. We anticipate that it could broaden the application scope of metasurface holography.

Numerous applications exist for chemical detection, ranging from the industrial production of chemicals to pharmaceutical manufacturing, environmental monitoring, and hazardous risk control. For many applications, infrared absorption spectroscopy is the favored technique, due to attributes that include short response time, high specificity, minimal drift, in situ operation, negligible sample disruption, and reliability. The workhorse instrument for infrared absorption is the Fourier transform infrared (FTIR) spectrometer. While such systems are suitable for many purposes, new applications would be enabled by small, lightweight, low power and low cost infrared microspectrometers. Here we perform a detailed study on a microspectrometer chemical classifier comprising an array of plasmonic mid-infrared spectral filters used with a photodetector array, whose outputs are analyzed by a machine learning algorithm. We conduct simulations (including noise), demonstrating the identification of six gas-phase and six liquid-phase chemicals. We study the performance of our method at detecting the concentration of acetylene.

Thin two-dimensional (2D) material absorbers have the potential to reduce volume-dependent thermal noise in infrared detectors. However, any reduction in noise must be balanced against lower absorption from the thin layer, which necessitates advanced optical architectures. Such architectures can be particularly effective for applications that require detection only within a specific narrow wavelength range. This study presents a Fabry-Perot cavity enhanced bP/MoS2 midwave infrared (MWIR) photodiode. This simple structure enables tunable narrow-band (down to 0.42 μm full width at half-maximum) photodetection in the 2-4 μm range by adjusting the thickness of the Fabry-Perot cavity resonator. This is achieved while maintaining room-temperature performance metrics comparable to previously reported 2D MWIR detectors. Zero bias specific detectivity and responsivity values of up to 1.7 × 109 cm Hz1/2 W-1 and 0.11 A W-1 at λ = 3.0 μm are measured with a response time of less than 3 ns. These results introduce a promising family of 2D detectors with applications in MWIR spectroscopy.

Chip-scale microspectrometers, operational across the visible to long-wave infrared spectral region will enable many remote sensing spectroscopy applications in a variety of fields including consumer electronics, process control in manufacturing, as well as environmental and agricultural monitoring. The low weight and small device footprint of such spectrometers could allow for integration into handheld, unattended vehicles or wearable-electronics based systems. This review will focus on recent developments in nanophotonic microspectrometer designs, which fall into two design categories: (i) planar filter-arrays used in conjunction with visible or IR detector arrays and (ii) microspectrometers using filter-free detector designs with tailored responsivities, where spectral filtering and photocurrent generation occur within the same nanostructure.

The mid-wave infrared (MWIR) wavelength range plays a central role in a variety of applications, including optical gas sensing, industrial process control, spectroscopy, and infrared (IR) countermeasures. Among the MWIR light sources, light-emitting diodes (LEDs) have the advantages of simple design, room-temperature operation, and low cost. Owing to the low Auger recombination at high carrier densities and direct bandgap of black phosphorus (bP), it can serve as a high quantum efficiency emitting layer in LEDs. In this work, we demonstrate bP-LEDs exhibiting high external quantum efficiencies and wall-plug efficiencies of up to 4.43 and 1.78%, respectively. This is achieved by integrating the device with an Al

We use a genetic algorithm to optimize six mid-infrared filters for a machine learning classifier that identifies chemicals from their infrared transmission. The model is tested by classifying 15 chemical classes via simulations with noise.

We perform gas sensing using an infrared metasurface microspectrometer. We train a machine learning classifier by subjecting the microspectrometer to four different gases. We demonstrate the detection of methyl-ethyl-ketone at the permissible exposure limit.

The remarkable advances in nanofabrication that have occurred over the last decade present opportunities for the realization of new types of holograms. In this work, for the first time to the best of our knowledge, a method for phase multicolor holograms based on nanohole arrays is described. The nanoholes are in an aluminum film that is interposed between the glass substrate and a silicon dioxide layer. The nanoholes serve as color filters for blue, green, and red wavelengths and provide the necessary phase distribution via the detour phase method. Our nanohole arrays are optimized to maximize the transmission efficiency of the red, green, and blue channels and to minimize the cross-talk between them. We design two multicolor holograms based on these filters and simulate their performance. The results show good fidelity to the desired holographic images. The proposed structure has the advantages of being very compact, of requiring only a simple fabrication method with one lithography step, and of employing materials (aluminum and silicon dioxide) that are compatible with standard CMOS technology.

Mid-wave and long-wave infrared (MWIR and LWIR) detection play vital roles in applications that include health care, remote sensing, and thermal imaging. However, detectors in this spectral range often require complex fabrication processes and/or cryogenic cooling and are typically expensive, which motivates the development of simple alternatives. Here, we demonstrate broadband (0.43-10 μm) room-temperature photodetection based on copper tetracyanoquinodimethane (CuTCNQ), a metal-organic semiconductor, synthesized via a facile wet-chemical reaction. The CuTCNQ crystals are simply drop-cast onto interdigitated electrode chips to realize photoconductors. The photoresponse is governed by a combination of interband (0.43-3.35 μm) and midgap (3.35-10 μm) transitions. The devices show response times (∼365 μs) that would be sufficient for many infrared applications (e.g., video rate imaging), with a frequency cutoff point of 1 kHz.

We use machine learning (simulated annealing) to design plasmonic nanoapertures that function as optical nanotweezers. The nanoapertures have irregular shapes that are chosen by our algorithm. We present electromagnetic simulations that show that these produce stronger field enhancements and extraction energies than nanoapertures comprising double nanoholes with the same gap geometry. We show that performance is further improved by etching one or more rings into the gold surrounding the nanoaperture. We provide a direct comparison between our design and work that is representative of the state of the art in plasmonic nanotweezers at the time of writing. Lastly, we provide experimental results that compare our algorithm-designed structure to a double nanohole design

The detection of light in the longwave infrared (LWIR) region is crucial for many applications such as environmental monitoring, thermal imaging and surveillance. Many commercial LWIR photodetectors involve complex fabrication processes, require cryogenic temperatures or exhibit slow photoresponse. Hence, there is a continuous pursuit of developing room-temperature, on-chip LWIR photodetectors, using simple fabrication processes [1] . Metal-organic charge transfer complexes typically have a narrow bandgap, which allows them to absorb LWIR wavelengths [2] . Here, we report room temperature LWIR photoresponse in one such charge transfer complex, ie. copper 7,7,8,8-tetracyano-2,3,5,6-tetraflouroquinodimethane (CuTCNQF 4 ), achieved via simple synthesis and fabrication processes.

Multicolor holograms have numerous applications, including in art, data storage, security, and advanced displays. In recent years, there has been much interest concerning multicolor holograms based on metasurfaces [1] . Wen et al [2] demonstrated multicolor holograms using dielectric nanoparticles, with the nanoparticle size defining its resonant wavelength and its position defining its phase via the detour phase concept [3] . While this approach worked, it required good control over nanoparticle size and shape, achieved using inductively coupled reactive ion etching (ICP-RIE). This motivates the development of multicolor metasurface holograms that are also based on detour phase, but using other nanostructure types. Here we show that arrays of nanoholes in aluminum films enable the realization of multicolor holograms. We design nanohole arrays that serve as color (i.e. red/green/blue) filters with high transmission and low cross-talk. We then design two multicolor holograms based on these filters and simulate their performance, demonstrating that they show good fidelity to the desired holographic images. Our device is based on aluminum and silicon dioxide, giving it the advantage of CMOS compatibility.

Miniaturized spectrometers are advantageous for many applications and can be achieved by what we term the filter-array detector-array (FADA) approach. In this method, each element of an optical filter array filters the light that is transmitted to the matching element of a photodetector array. By providing the outputs of the photodetector array and the filter transmission functions to a reconstruction algorithm, the spectrum of the light illuminating the FADA device can be estimated. Here, we experimentally demonstrate an array of 101 band-pass transmission filters that span the mid- to long-wave infrared (6.2 to 14.2 μm). Each filter comprises a sub-wavelength array of coaxial apertures in a gold film. As a proof-of-principle demonstration of the FADA approach, we use a Fourier transform infrared (FTIR) microscope to record the optical power transmitted through each filter. We provide this information, along with the transmission spectra of the filters, to a recursive least squares (RLS) algorithm that estimates the incident spectrum. We reconstruct the spectrum of the infrared light source of our FTIR and the transmission spectra of three polymer-type materials: polyethylene, cellophane and polyvinyl chloride. Reconstructed spectra are in very good agreement with those obtained via direct measurement by our FTIR system.

Long-wave infrared (LWIR) photodetection is of high technological importance, having a wide range of applications that include thermal imaging and spectroscopy. Two-dimensional (2D) noble-transition-metal dichalcogenides, platinum diselenide (PtSe2) in particular, have recently shown great promise for infrared detection. However, previous studies have mainly focused on wavelengths up to the short-wave infrared region. In this work, we demonstrate LWIR photodetectors based on multilayer PtSe2. In addition, we present an optical cavity substrate that enhances the light-matter interaction in 2D materials and thus their photodetection performance in the LWIR spectral region. The PtSe2 photoconductors fabricated on the TiO2/Au optical cavity substrate exhibit responsivities up to 54 mA/W to LWIR illumination at a wavelength of 8.35 μm. Moreover, these devices show a fast photoresponse with a time constant of 54 ns to white light illumination. The findings of this study reveal the potential of multilayer PtSe2 for fast and broadband photodetection from visible to LWIR wavelengths.

Infrared radiation is by nature characterized by low photon energy and thus usually detected by semiconductor materials with small band gaps. These materials are usually produced by epitaxial growth processes. These achieve high performance but often at high cost. This motivates the development of alternative materials. Here, we aim to harness recent breakthroughs in nano-optics and in two dimensional materials to realize photodetectors that are scalable, low cost and with good performance. We report our results with materials that include PtSe2, Cu TCNQ, bP/MoS2, SeTe, and graphene. We furthermore report on filter array – detector array (FADA) microspectrometers.

Multicolor holography can faithfully record the color, depth, parallax, and other properties of scenes and has thus found numerous applications, for example, in optical document security, nonvolatile data storage, and virtual or augmented reality systems. Nanophotonic metasurfaces present multiple degrees of freedom to manipulate the properties of optical fields at visible wavelengths. These in turn provide opportunities for metasurface-based multicolor holography. We describe recent developments in multicolor metasurface holograms. These are categorized based on their color-separating mechanisms rather than their structural properties, such as whether they are plasmonic or dielectric. We hope this review will provide readers with new insights and thus help extend applications of metasurface-based multicolor holography to other fields.

We demonstrate a microspectrometer comprising plasmonic filters integrated with an infrared camera. Blackbody light illuminates the material being studied, with transmitted light collected by the microspectrometer. The latter uses machine learning to identify the material.

We experimentally demonstrate a nanostructured silicon microspectrometer chip that consists of 144 pixels, each comprising an array of vertical waveguides of subwavelength period. We show that both broad- and narrow-band visible spectra can be reconstructed.

We present a silicon-based Pancharatnam-Berry (PB) phase metasurface hologram that produces a triple-helix solenoid tractor beam from a Gaussian input beam. Our metasurface has a >90% diffraction efficiency and >75% transmission.

Mid-infrared (MIR) spectroscopy has numerous industrial applications and is usually performed with Fourier-transform infrared (FTIR) spectrometers. While these work well for many purposes, there is currently much interest in alternative approaches that are smaller and lighter, i.e., MIR microspectrometers. Here we investigate all-dielectric metasurfaces as spectral filters for MIR microspectrometers. Two metasurface types are studied. For the first, we design, fabricate, and test a metasurface with a narrow and angularly tunable transmission stop band. We use it to reconstruct the transmission spectra of various materials. The second metasurface, investigated theoretically, possesses narrow passband features via symmetry-protected bound states in the continuum.

Biomolecule sensing plays an important role in both fundamental biological studies and medical diagnostic applications. Infrared (IR) spectroscopy presents opportunities for sensing biomolecules as it allows their fingerprints to be determined by directly measuring their absorption spectra. However, the detection of biomolecules at low concentrations is difficult with conventional IR spectroscopy due to signal-to-noise considerations. This has led to recent interest on the use of nanostructured surfaces to boost the signals from biomolecules in a method termed surface enhanced infrared spectroscopy. So far, efforts have largely involved the use of metallic nanoantennas (which produce large field enhancement) or graphene nanostructures (which produce strong field confinement and provide electrical tunability). Here, we propose a nanostructured surface that combines the large field enhancement of metallic nanoantennas with the strong field confinement and electrical tunability of graphene plasmons. Our device consists of an array of plasmonic nanoantennas and graphene nanoslits on a resonant substrate. We perform systematic electromagnetic simulations to quantify the sensing performance of the proposed device and show that it outperforms designs in which only plasmons from metallic nanoantennas or plasmons from graphene are utilized. These investigations consider the model system of a representative protein-goat anti-mouse immunoglobulin G (IgG) – in monolayer or sub-monolayer form. Our findings provide guidance for future biosensors for the sensitive quantification and identification of biomolecules.

In recent years there has been much interest concerning the development of modulators in the mid- to long-wave infrared, based on emerging materials such as graphene. These have been frequently pursued for optical communications, though also for other specialized applications such as infrared scene projectors. Here we investigate a new application for graphene modulators in the mid- to long-wave infrared. We demonstrate, for the first time, computational spectroscopy in the mid- to long-wave infrared using a graphene-based metasurface modulator. Furthermore, our metasurface device operates at low gate voltage. To demonstrate computational spectroscopy, we provide our algorithm with the measured reflection spectra of the modulator at different gate voltages. We also provide it with the measured reflected light power as a function of the gate voltage. The algorithm then estimates the input spectrum. We show that the reconstructed spectrum is in good agreement with that measured directly by a Fourier transform infrared spectrometer, with a normalized mean-absolute-error (NMAE) of 0.021.

Metal films are often used in optoelectronic devices as mirrors and/or electrical contacts. In many such devices, however, the π-phase shift of the electric field that occurs upon reflection from a perfect electric conductor (for which a metal mirror is a reasonable approximation) is undesirable. This is because it results in the total electric field being zero at the mirror surface, which is unfavorable if one wishes for example to enhance absorption by a material placed there. This has motivated the development of structures that reflect light with zero phase shift, as these lead to the electric field having an anti-node (rather than node) at the surface. These structures have been denoted by a variety of terms, including magnetic mirrors, magnetic conductors, and high impedance surfaces. In this work, we experimentally demonstrate a long-wave infrared device that we term a magnetic mirror. It comprises an array of amorphous silicon cuboids on a gold film. Our measurements demonstrate a phase shift of zero and a high reflectance (of ∼90%) at a wavelength of 8.4 µm. We present the results of a multipole analysis that provides insight into the physical mechanism. Lastly, we investigate the use of our structure in a photodetector application by performing simulations of the optical absorption by monolayer graphene placed on the cuboids.

Semiconducting absorbers in high-performance short-wave infrared (SWIR) photodetectors and imaging sensor arrays are dominated by single-crystalline germanium and III-V semiconductors. However, these materials require complex growth and device fabrication procedures. Here, thermally evaporated Se

We demonstrate a spectrometer that uses a smaityhone to image the speckle pattern produced by a multimode optical fiber. A smarjihone-based algorithm uses the measured pattern and a calibration library to determine the input spectnrm.

We demonstrate room-temperature photodetectors at wavelengths from visible (450 nm, 532 nm) to near- (850 nm), short-wave (1550 nm), mid-wave $(4.5 \mu m)$ and long-wave $(8.35 \mu m)$ infrared. These are based on drop-cast Cu TCNQ crystals. © 2019 The Author(s)

We experimentally demonstrate the algorithmic reconstruction of the infrared transmission spectrum of a polymer using a zero-contrast waveguide-grating metasurface as a filter. By changing the metasurface angle, a variety of filter functions are obtained. © 2020 The Author(s)

We design a plasmonic filter array for a filter array-detector array microspectrometer. We perform numerical experiments, including noise, that predict that this configuration would enable the identification of various materials via their infrared fingerprints.

We demonstrate long wave infrared photodetectors based on the transition metal dichalcogenide platinum diselenide (PtSe2) in its bulk form for the first time to our knowledge. Fabricated devices show sub-millisecond response times.

We experimentally demonstrate vertical-cavity surface-emitting lasers (VCSEL) with integrated plasmonic and dielectric metasurfaces. The metasurfaces shape the polarization of the laser emission from the VCSELs and also enable them to serve as polarization-dependent photodetectors.

The ability to optically trap nanoscale particles in a reliable and noninvasive manner is emerging as an important capability for nanoscience. Different techniques have been introduced, including plasmonic nanostructures. Nano-optical tweezers based on plasmonics face the problem of Joule heating, however, due to high losses in metals. Here we experimentally demonstrate the optical trapping and transport of nanoparticles using a nonplasmonic approach, namely, a silicon nanoantenna. We trap polystyrene nanoparticles with diameters of 20 and 100 nm and use fluorescence microscopy to track their positions as a function of time. We show that multiple nanoparticles can be trapped simultaneously with a single nanoantenna. We show that the infrared trapping laser beam also produces fluorescent emission from trapped nanoparticles via two-photon excitation. We present simulations of the nanoantenna that predict enhanced optical forces with insignificant heat generation. Our work demonstrates that silicon nanoanten...

The responsivity spectrum of a photodetector is one of its key specifications. It ultimately originates from the combination of the absorption spectrum of the photosensitive region and the internal quantum efficiency. Many applications of photodetectors would benefit from an improved ability to tailor the responsivity spectrum. This is particularly true for color and multispectral imaging. The absorption spectrum of a bulk (unstructured) semiconductor is fixed however, being determined by its complex refractive index. Here, we review recent work that demonstrates that the absorption spectrum of a photodetector can be controlled via waveguide resonances in semiconductor nanowires. We discuss the physical interpretation for this phenomenon. We review work in which p-i-n photodiodes were incorporated into vertically oriented silicon nanowires, and then used for color imaging. We review work in which tandem-style photodetectors were demonstrated, with a p-i-n silicon nanowire photodiode formed above an n-i-p planar silicon photodiode. We review work in which narrowband photodetection across the visible-to-infrared was demonstrated using germanium nanowires. Finally, we describe related work in which silicon nanowires have been explored for other applications, namely solar cells.

We experimentally demonstrate nanostructured silicon photodetectors which consist of subwavelength arrays of verticallyoriented waveguides etched into a P-I-N photodiode. Our device combines both spectral-filtering and photocurrentgeneration in one all-Si structure. We show that absorption and responsivity spectra of these nanophotonic devices can be tuned by appropriate geometric design.

Spectroscopy is a cornerstone in the field of optics. Conventional spectrometers generally require two elements. The first provides wavelength selectivity, for example, diffraction grating or Michelson interferometer. The second is a detector (or detector array). Many applications would benefit from very small and lightweight spectrometers. This motivates us to investigate what may be regarded as an ultimate level of miniaturization for a spectrometer, in which it consists solely of a detector array. We demonstrate a chip containing 24 pixels, each comprising a silicon nanowire (Si NW) array photodetector formed above a planar photodetector. The NWs are structurally colored, enabling us to engineer the responsivity spectra of all photodetectors in the chip. Each pixel thus combines wavelength selectivity and photodetection functions. We demonstrate the use of our chip to reconstruct the spectrum of an unknown light source impinging upon it. This is achieved by an algorithm that takes as its inputs the measured photocurrents from the pixels and a library of their responsivity spectra.