Search

Bowman-Birk inhibitor is a protease inhibitor derived from soybeans that has demonstrated chemopreventive activity in a number of in vitro and animal systems. We conducted a 1-month phase IIa clinical trial of Bowman-Birk inhibitor concentrate (BBIC) in patients with oral leukoplakia. BBIC was administered to 32 subjects with oral leukoplakia for 1 month. We assessed toxicity and clinical and histological response of the lesions, and oral mucosal cell protease activity (PA) and serum micronutrient levels were measured. Clinical response was determined by measurement of pre- and posttreatment individual and total lesion areas and analysis of blinded clinical judgments of photographs. On the basis of prespecified response criteria, 31% of patients achieved a clinical response (two with complete and eight with partial responses). BBIC was nontoxic in doses up to 1066 chymotrypsin inhibitory units. The mean pretreatment total lesion area decreased from 615 to 438 mm2 after BBIC treatment (P < 0.004). A linear fit of the dose-response relationship between dose of BBIC and decrease in total lesion area was suggested (P < 0.08), and analysis of blinded clinical impression from lesion photographs confirmed this relationship (P < 0.01). Overall, at all doses tested, a 24.2% decrease in total lesion area was observed following treatment (sign rank = -142; P < 0.004). High pretreatment PA was associated with greater decreases in PA after BBIC administration (P < 0.02). BBIC demonstrated clinical activity after oral administration to patients with oral leukoplakia. These results indicate that BBIC should be investigated for chemopreventive activity in a randomized clinical trial.

The Bowman-Birk inhibitor (BBI) is a soybean-derived serine protease inhibitor and a potential cancer chemopreventive agent for humans. In this Phase I clinical trial, BBI concentrate was administered as a single oral dose to 24 subjects with oral leukoplakia. Pharmacokinetics of BBI was analyzed, and subjects were monitored clinically for toxic effects. Subjects received between 25 and 800 chymotrypsin inhibitor units (CIU) of the compound in a dose escalation trial. BBI was taken up rapidly, and a metabolic product of BBI was excreted in the urine within 24-48 h. No clinical or laboratory evidence of toxicity was observed in the study. Protease activity was also measured in buccal cells to evaluate usefulness as a biomarker. Single-dose BBI concentrate administered up to 800 CIU was well tolerated and appeared to be nontoxic. Further investigation in Phase II clinical trials is being done.

The present study was undertaken to determine whether the Bowman-Birk inhibitor (BBI) could prevent colon carcinogenesis in rats treated with dimethylhydrazine (DMH) and whether there were adverse side effects associated with treatment with BBI for cancer prevention. BBI was evaluated in the forms of purified BBI (PBBI) or an extract of soybeans enriched in BBI, termed BBI concentrate (BBIC). The results demonstrate that PBBI and BBIC reduced the incidence and frequency of tumors in DMH-treated rats compared with animals treated with DMH alone. Autoclaved BBIC, in which the protease inhibitor activity of BBI was destroyed, had a weak and statistically insignificant, suppressive effect on DMH-induced colon carcinogenesis in rats, suggesting that the protease inhibitor activity of BBI is likely to be responsible for the anticarcinogenic activity of BBIC. Soy molasses, which contains soy isoflavones, did not have an effect on colon cancer carcinogenesis in DMH-treated rats. Similar to results from previous studies (Nauss et al. JNCI 73, 915-924, 1984), the most aggressive, malignant colon adenocarcinomas developed within or in association with gut-associated lymphoid tissue aggregates. No adverse side effects on the pancreas or animal growth were observed in rats treated with PBBI or BBIC. These results demonstrate that PBBI and BBIC may be used to prevent colon cancer without significant adverse side effects. [ABSTRACT FROM AUTHOR]

The Bowman-Birk inhibitor (BBI) is a soybean-derived serine protease inhibitor with anticarcinogenic activities. BBI, in the form of BBI concentrate (BBIC), is currently being evaluated in clinical trials as a human cancer-preventive agent. In the present study, an enzyme-linked immunosorbent assay was used to measure BBI concentrations in serum samples collected from human subjects and animals treated with BBIC. The results demonstrate that the serum BBI concentration was higher than the baseline level for the patients after treatment with BBIC at 100-800 chymotrypsin-inhibitor units/day for 0.5, 1, 2, 4, and 6 mo. The increase in serum BBI concentration was also observed in dogs treated with BBIC at 100-1,000 mg/kg/day for 52 wk, and the increase was dose dependent. The results also indicate that anti-BBI antibodies were present in animals and the serum levels of anti-BBI antibodies increased significantly in mice treated with BBIC at 100-1,000 mg/kg/day for 15 and 26 wk. The increase in the serum level of anti-BBI antibodies in dogs treated with BBIC was not statistically significant, and no increase in the serum level of anti-BBI antibodies was observed in human subjects after BBIC treatment. These results suggest that orally ingested BBI is absorbed by human subjects and animals and that some animals develop antibodies to BBI in response to treatment with BBIC. [ABSTRACT FROM AUTHOR]

Objetivo: Evaluar los efectos de dos tipos de baño en cama: seco y tradicional, frente a la respuesta adaptativa en modo fisiológico de Roy en paciente crítico cardiovascular (pccv). Metodología: Estudio de diseño cuasi-experimental, de intervención con preprueba y posprueba, realizado en la Unidad de Cuidados Intensivos (uci) de la Clínica Medellín. El grupo experimental fue de 36 pacientes, a quienes se les realizó baño en cama seco; el grupo control fue de 36 pacientes, a quienes se les realizó baño en cama tradicional. Se utilizaron los estadísticos Wilcoxon, u de Mann Whitney y el Modelo de dos factores, con medidas repetidas en un factor. Resultados: Se encontró un efecto benéfico durante la realización del baño en cama en seco, puesto que los indicadores de tensión arterial y frecuencia respiratoria no presentaron respuestas inefectivas (p = 0,03 y p = 0,013, respectivamente). Por otra parte, las variables duración del baño y cuidados adicionales fueron satisfactorias en comparación con el baño en cama tradicional. Conclusiones: Los resultados permiten recomendar el uso del baño en cama en seco en paciente crítico cardiovascular (pccv), en virtud de los efectos benéficos que facilitan los procesos de adaptación, contribuyendo así a cualificar el cuidado de enfermería en este tipo de pacientes.

Se realizó un estudio descriptivo retrospectivo que evaluó el costo generado por la atención de los pacientes en una UCI de tipo mixto en un hospital universitario. El objetivo fue establecer de manera detallada cada uno de los recursos consumidos tomando la perspectiva del prestador de servicios. Se evaluó la historia clinica de todos los pacientes atendidos durante el período comprendido entre el 1 de octubre de 2003 y el 31 de octubre de 2004, asignándolos de acuerdo con el diagnóstico primario que justificó el ingreso a la unidad en cinco grupos que denominamos de diagnóstico, relacionados de la siguiente manera: 1) cardiovasculares médicos, 2) cardiovasculares quirúrgicos, 3) sepsis de manejo médico, 4) sepsis de manejo quirúrgico y 5) el trauma. Se determinó el consumo de recursos a partir de la factura de venta, pero el valor aplicado corresponde al precio de compra del insumo. Se incluyeron 190 pacientes de los cuales no fue posible completar la información financiera en 43, por lo que al final el tamaño de la muestra fue de 147. En nuestro estudio el mayor consumo de recursos se encontró en aquellos que ingresaron por sepsis y en todos los grupos los que tuvieron mayor peso fueron el pago del recurso humano y en segunda instancia la nutrición, comportamiento que sigue la tendencia descrita en artículos escritos en países con alto desarrollo tecnológico, a pesar de las diferencias claras en los sistemas de atención en salud. Conclusión: la distribución de los componentes de costos de atención en la UCI analizada concuerda con otros estudios extranjeros. El desarrollo en los sistemas de información y el conocimiento del costo detallado constituyen una herramienta indispensable para la toma de decisiones. Abreviaturas: UCI, unidad de cuidados intensivos; GDR, grupo de diagnóstico relacionado; APACHE II, Acute physiological and cronic health evaluation; DE, desviación estándar. EAPB, Empresas Administradoras de Planes de Beneficio.

Bowman-Birk inhibitor (BBI) is a soybean-derived anticarcinogenic protease inhibitor previously shown to potentiate cisplatin-induced cytoxicity in human lung and ovarian cancer cells. To further assess the potential of BBI as a sensitizing agent for cancer radiotherapy and chemotherapy, we evaluated the effects of BBI and a soybean concentrate enriched in BBI known as BBI concentrate (BBIC) on clonogenic survival and radiation- or cisplatin-induced cell killing in MCF7 human breast carcinoma cells, SCC61 and SQ20B human head and neck carcinoma cells, HeLa, HeLa-R1, and HeLa-R3 human cervical carcinoma cells, MCF10 nontumorigenic human epithelial cells, HTori-3 nontumorigenic human thyroid epithelial cells, and C3H10T1/2 mouse fibroblast cells. BBI and BBIC significantly suppressed the clonogenic survival of MCF7 and SCC61 cells. BBIC also suppressed the survival of SQ20B cells and enhanced radiation-induced cell killing in SCC61 and SQ20B cells and cisplatin-induced cell killing in HeLa, HeLa-R1, and HeLa-R3 cells. In contrast, BBI and/or BBIC did not enhance radiation-induced cell killing in MCF10 cells or cisplatin-induced cell killing in C3H10T1/2 cells. BBI did not significantly affect the survival of SQ20B cells or enhance radiation-induced cell killing in SCC61 and SQ20B cells. The clonogenic survivals of MCF10 and C3H10T1/2 cells were not adversely affected by treatment with BBI or BBIC. The clonogenic survival of HTori-3 cells was only moderately suppressed by treatment with BBIC at > or = 80 micrograms/ml. These results suggest that BBIC could be a useful agent for the potentiation of radiation- and cisplatin-mediated cancer treatment without significant adverse effects on surrounding normal tissues. [ABSTRACT FROM AUTHOR]

Controlling polymorphism, namely, the occurrence of multiple crystal forms for a given compound, is still an open technological challenge that needs to be addressed for the reliable manufacturing of crystalline functional materials. Here, we devised a series of 13 organic crystals engineered to embody molecular fragments undergoing specific nanoscale motion anticipated to drive cooperative order-disorder phase transitions. By combining polarized optical microscopy coupled with a heating/cooling stage, differential scanning calorimetry, X-ray diffraction, low-frequency Raman spectroscopy, and calculations (density functional theory and molecular dynamics), we proved the occurrence of cooperative transitions in all the crystalline systems, and we demonstrated how both the molecular structure and lattice dynamics play crucial roles in these peculiar solid-to-solid transformations. These results introduce an efficient strategy to design polymorphic molecular crystalline materials endowed with specific molecular-scale lattice and macroscopic dynamics.

Treating the amide acetanilide (N-phenylacetamide, C 8 H 9 NO) with aqueous strong acids allowed the structures of five hemi-protonated salt forms of acetanilide to be elucidated. N-(1-Hydroxyethylidene)anilinium chloride-N-phenylacetamide (1/1), [(C 8 H 9 NO) 2 H][Cl], and the bromide, [(C 8 H 9 NO) 2 H][Br], triiodide, [(C 8 H 9 NO) 2 H][I 3 ], tetrafluoroborate, [(C 8 H 9 NO) 2 H][BF 4 ], and diiodobromide hemi(diiodine), [(C 8 H 9 NO) 2 H][I 2 Br]·0.5I 2 , analogues all feature centrosymmetric dimeric units linked by O-H...O hydrogen bonds that extend into one-dimensional hydrogen-bonded chains through N-H...X interactions, where X is the halide atom of the anion. Protonation occurs at the amide O atom and results in systematic lengthening of the C=O bond and a corresponding shortening of the C-N bond. The size of these geometric changes is similar to those found for hemi-protonated paracetamol structures, but less than those in fully protonated paracetamol structures. The bond angles of the amide fragments are also found to change on protonation, but these angular changes are also influenced by conformation, namely, whether the amide group is coplanar with the phenyl ring or twisted out of plane., (open access.)

While pulsed field gradient stimulated echo nuclear magnetic resonance (PFGSTE NMR) spectroscopy has found widespread use in the quantification of self-diffusivity for many NMR-active nuclei, extending this technique to uncommon nuclei with unfavorable NMR properties remains an active area of research. Potassium-39 ( 39 K) is an archetypical NMR nucleus exhibiting an unfavorable gyromagnetic ratio combined with a very low Larmor frequency. Despite these unfavorable properties, this work demonstrates that 39 K PFGSTE NMR experiments are possible in aqueous solutions of concentrated potassium nitrite. Analysis of the results indicates that 39 K NMR diffusometry is feasible when the nuclei exhibit spin-lattice and spin-spin relaxation coefficients on the order of 60-100 ms and 50-100 ms, respectively. The diffusivity of 39 K followed Arrhenius behavior, and comparative 23 Na, 7 Li, and 1 H PFGSTE NMR studies of equimolal sodium nitrite and lithium nitrite solutions led to correlations between the enthalpy of hydration with the activation energy governing self-diffusion of the cations and also of water. Realizing the feasibility of 39 K PFGSTE NMR spectroscopy has a widespread impact across energy sciences because potassium is a common alkali element in energy storage materials and other applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Inc.)

A new polymorph of the diuretic chloro-thia-zide, 6-chloro-1,1-dioxo-2 H -1,2,4-benzo-thia-zine-7-sulfonamide, C 7 H 6 ClN 3 O 4 S 2 , is described. Crystallized from basic aqueous solution, this monoclinic polymorph is found to be less thermodynamically favoured than the known triclinic polymorph and to feature only N-H⋯O type inter-molecular hydrogen bonds as opposed to the N-H⋯O and N-H⋯N type hydrogen bonds found in the P 1 form., (© Brydson and Kennedy 2024.)

Rubidium and cesium are the least studied naturally occurring s-block metals in organometallic chemistry but are in plentiful supply from a sustainability viewpoint as highlighted in the periodic table of natural elements published by the European Chemical Society. This underdevelopment reflects the phenomenal success of organometallic compounds of lithium, sodium, and potassium, but interest in heavier congeners has started to grow. Here, the synthesis and structures of rubidium and cesium bis(amido)alkyl magnesiates [(AM)MgN' 2 alkyl] ∞ , where N' is the simple heteroamide - N(SiMe 3 )(Dipp), and alkyl is n Bu or CH 2 SiMe 3 , are reported. More stable than their n Bu analogues, the reactivities of the CH 2 SiMe 3 magnesiates toward 1,4-cyclohexadiene are revealed. Though both reactions produce target hydrido-magnesiates [(AM)MgN' 2 H] 2 in crystalline form amenable to X-ray diffraction study, the cesium compound could only be formed in a trace quantity. These studies showed that the bulk of the - N(SiMe 3 )(Dipp) ligand was sufficient to restrict both compounds to dimeric structures. Bearing some resemblance to inverse crown complexes, each structure has [(AM)(N)(Mg)(N)] 2 ring cores but differ in having no AM-N bonds, instead Rb and Cs complete the rings by engaging in multihapto interactions with Dipp π-clouds. Moreover, their hydride ions occupy μ 3 -(AM) 2 Mg environments, compared to μ 2 -Mg 2 environments in inverse crowns., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Molecular heterobimetallic hydride complexes of lanthanide (Ln) and main-group (MG) metals exhibit chemical properties unique from their monometallic counterparts and are highly reactive species, making their synthesis and isolation challenging. Herein, molecular Ln/Al heterobimetallic trihydrides [Ln(Tp) 2 (μ-H) 2 Al(H)(N″)] [ 2-Ln ; Ln = Y, Sm, Dy, Yb; Tp = hydrotris(1-pyrazolyl)borate; N″ = N(SiMe 3 ) 2 ] have been synthesized by facile insertion of aminoalane [Me 3 N·AlH 3 ] into the Ln-N amide bonds of [Ln(Tp) 2 (N″)] ( 1-Ln ). Thus, this is a simple synthetic strategy to access a range of Ln/Al hydrides. Reactivity studies demonstrate that 2-Ln is a heterobimetallic hydride, with evidence for the cooperative nature of 2-Ln shown by the catalytic amine-borane dehydrocoupling under ambient conditions in contrast to its monomeric counterparts.

The Cu-catalyzed azide-alkyne cycloaddition (CuAAC) reaction is used as a ligation tool throughout chemical and biological sciences. Despite the pervasiveness of CuAAC, there is a need to develop more efficient methods to form 1,4-triazole ligated products with low loadings of Cu. In this paper, we disclose a mechanistic model for the ynamine-azide (3 + 2) cycloadditions catalyzed by copper(II) acetate. Using multinuclear nuclear magnetic resonance spectroscopy, electron paramagnetic resonance spectroscopy, and high-performance liquid chromatography analyses, a dual catalytic cycle is identified. First, the formation of a diyne species via Glaser-Hay coupling of a terminal ynamine forms a Cu(I) species competent to catalyze an ynamine-azide (3 + 2) cycloaddition. Second, the benzimidazole unit of the ynamine structure has multiple roles: assisting C-H activation, Cu coordination, and the formation of a postreaction resting state Cu complex after completion of the (3 + 2) cycloaddition. Finally, reactivation of the Cu resting state complex is shown by the addition of isotopically labeled ynamine and azide substrates to form a labeled 1,4-triazole product. This work provides a mechanistic basis for the use of mixed valency binuclear catalytic Cu species in conjunction with Cu-coordinating alkynes to afford superior reactivity in CuAAC reactions. Additionally, these data show how the CuAAC reaction kinetics can be modulated by changes to the alkyne substrate, which then has a predictable effect on the reaction mechanism.

Recently main group compounds have stepped into the territory of precious transition metal compounds with respect to utility in the homogeneous catalysis of fundamentally important organic transformations. Inspired by the need to promote more sustainability in chemistry because of their greater abundance in nature, this change of direction is surprising since main group metals generally do not possess the same breadth of reactivity as precious transition metals. Here, we introduce the dihydropyridylsodium compound, Na-1,2-tBu-DH(DMAP), and its monomeric variant [Na-1,2-tBu-DH(DMAP)]·Me 6 TREN, and demonstrate their effectiveness in transfer hydrogenation catalysis of the representative alkene 1,1-diphenylethylene to the alkane 1,1-diphenylethane using 1,4-cyclohexadiene as hydrogen source [DMAP = 4-dimethylaminopyridine; Me 6 TREN = tris(N,N-dimethyl-2-aminoethyl)amine]. Sodium is appealing because of its high abundance in the earth's crust and oceans, but organosodium compounds have been rarely used in homogeneous catalysis. The success of the dihydropyridylsodium compounds can be attributed to their high solubility and reactivity in organic solvents., (© 2024. The Author(s).)

The C-aryl-tetrahydropyran motif is prevalent in nature in a number of natural products with biological activity; however, this challenging architecture still requires novel synthetic approaches. We demonstrate the application of a stereoselective Heck redox-relay strategy for the synthesis of functionalized 2,6- trans -tetrahydropyrans in excellent selectivity in a single step from an enantiopure dihydropyranyl alcohol, proceeding through a novel exo -cyclic migration. The strategy has also been applied to the total synthesis of a trans -epimer of the natural product centrolobine in excellent yield and stereoselectivity.

A widely utilised class of ligands in synthesis and catalysis, β-diketiminate (BDI) or NacNac compounds were initially considered innocent in the sense that they remained intact in all their applications. That changed when the γ-C-H unit of their NCCCN backbone was found to engage in reactions with electrophiles. Here, we show that this special reactivity can be used advantageously to prepare tripodal modifications of the common NacNac ligand derived from 2,6-diisopropylphenyl-β-methyldiketimine [NacNacH (Me, Dipp)]. Lithiation to give NacNacLi, followed by reactions with isocyanates, isothiocyanates and a carbodiimide, have afforded a series of tripodal NacNac variants having N,N,N,O; N,N,N,S; or N,N,N,N potential dentation sites, many of which have been crystallographically characterised. Distinct ligating modes of these new ligands have been elucidated through the crystal structures of their lithiated derivatives., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Tethered N-heterocyclic carbenes (NHCs) are an emerging class of ligand, as they feature all the desirable aspects of NHCs (ease of synthesis, high tunabilty) but also enable metal-ligand cooperativity when combined with Lewis acidic metal centres due to the donor-acceptor nature of the complexes formed. Herein we report a simple ethoxy-tethered NHC for the stabilisation of Al(III) hydrides, resulting in the unexpected formation of a bicyclic N-heterocyclic aminal (1). Compound 1 behaves as a metal hydride, capable of reducing benzophenone and carbodiimide to yield compounds 2 and 3, respectively. Furthermore, we show that 1 behaves as an efficient catalyst in the dehydrocoupling of amine-boranes due to the hemi-labile nature of the supporting ligand., (© 2023 The Authors. Chemistry - An Asian Journal published by Wiley-VCH GmbH.)

The structures of five ammonium salt forms of monosulfonated azo dyes, derivatives of 4-(2-phenyldiazen-1-yl)benzenesulfonate, with the general formula [NH 4 ][O 3 S(C 6 H 4 )NN(C 6 H 3 )RR']·XH 2 O [R = OH, NH 2 or N(C 2 H 4 OH) 2 ; R' = H or OH] are presented. All form simple layered structures with alternating hydrophobic (organic) and hydrophilic (cation, solvent and polar groups) layers. To assess for isostructural behaviour of the ammonium cation with M + ions, the packing of these structures is compared with literature examples. To aid this comparison, the corresponding structures of four potassium salt forms of the monosulfonated azo dyes are also presented herein. Of the five ammonium salts it is found that three have isostructural equivalents. In two cases this equivalent is a potassium salt form and in one case it is a rubidium salt form. The isostructurality of ion packing and of unit-cell symmetry and dimensions tolerates cases where the ammonium ions form somewhat different interaction types with coformer species than do the potassium or rubidium ions. No sodium salt forms are found to be isostructural with any ammonium equivalent. However, similarities in the anion packing within a single hydrophobic layer are found for a group that consists of the ammonium and rubidium salt forms of one azo anion species and the sodium and silver salt forms of a different azo species., (open access.)

The synthesis of multivariate metal-organic frameworks (MOFs) is a well-known method for increasing the complexity of porous frameworks. In these materials, the structural differences of the ligands used in the synthesis are sufficiently subtle that they can each occupy the same site in the framework. However, multivariate or ligand scrambling approaches are rarely used in the synthesis of porous metal-organic polyhedra (MOPs) - the molecular equivalent of MOFs - despite the potential to retain a unique intrinsic pore from the individual cage while varying the extrinsic porosity of the material. Herein we directly synthesise scrambled cages across two families of lantern-type MOPs and find contrasting effects on their gas sorption properties. In one family, the scrambling approach sees a gradual increase in the BET surface area with the maximum and minimum uptakes associated with the two pure homoleptic cages. In the other, the scrambled materials display improved surface areas with respect to both of the original, homoleptic cages. Through analysis of the gas sorption isotherms, we attribute this effect to the balance of micro- and mesoporosity within the materials, which varies as a result of the scrambling approach. The gas uptake of the materials presented here underscores the tunability of cages that springs from their combination of intrinsic, extrinsic, micro- and meso-porosities., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Light alkali metal (Li, Na, K) amides have a long history of synthetic utility, but heavier (Rb, Cs) congeners have barely been studied. This study reveals remarkable structurally complex outcomes of reacting AM(HMDS) (AM = Rb, Cs; HMDS = hexamethyldisilazide) with benzaldehyde and acetophenone. Though complicated, reactions give a diversity of eye-catching isolated products, an enolate with a hexagonal prismatic network, two dienolates with distinct extended ladder motifs, and two β-imino-alkoxides comprising zig-zag chains of metal-oxygen bonds in infinite cages.

Three distinct routes are reported to the soluble, dihydridoaluminate compounds, AM[Al(NON Dipp )(H) 2 ] (AM=Li, Na, K, Rb, Cs; [NON Dipp ] 2- =[O(SiMe 2 NDipp) 2 ] 2- ; Dipp=2,6-iPr 2 C 6 H 3 ) starting from the alkali metal aluminyls, AM[Al(NON Dipp )]. Direct H 2 hydrogenation of the heavier analogues (AM=Rb, Cs) produced the first examples of structurally characterized rubidium and caesium dihydridoaluminates, although harsh conditions were required for complete conversion. Using 1,4-cyclohexadiene (1,4-CHD) as an alternative hydrogen source in transfer hydrogenation reactions provided a lower energy pathway to the full series of products for AM=Li-Cs. A further moderation in conditions was noted for the thermal decomposition of the (silyl)(hydrido)aluminates, AM[Al(NON Dipp )(H)(SiH 2 Ph)]. Probing the reaction of Cs[Al(NON Dipp )] with 1,4-CHD provided access to a novel inverse sandwich complex, [{Cs(Et 2 O)} 2 {Al(NON Dipp )(H)} 2 (C 6 H 6 )], containing the 1,4-dialuminated [C 6 H 6 ] 2- dianion and representing the first time that an intermediate in the commonly utilized oxidation process of 1,4-CHD to benzene has been trapped. The synthetic utility of the newly installed Al-H bonds has been demonstrated by their ability to reduce CO 2 under mild conditions to form the bis-formate AM[Al(NON Dipp )(O 2 CH) 2 ] compounds, which exhibit a diverse series of eyecatching bimetallacyclic structures., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

The structures of four salt forms of dopamine are reported. These are dopamine [2-(3,4-dihydroxyphenyl)ethan-1-aminium] benzoate, C 8 H 12 NO 2 + ·C 7 H 5 O 2 - , I, dopamine 4-nitrobenzoate, C 8 H 12 NO 2 + ·C 7 H 4 NO 4 - , II, dopamine ethanedisulfonate, 2C 8 H 12 NO 2 + ·C 2 H 4 O 6 S 2 2- , III, and dopamine 4-hydroxybenzenesulfonate monohydrate, C 8 H 12 NO 2 + ·C 6 H 5 O 4 S - ·H 2 O, IV. In all four structures, the dopamine cation adopts an extended conformation. Intermolecular interaction motifs that are common in the salt forms of tyramine can be found in related dopamine structures, but hydrogen bonding in the dopamine structures appear to be more variable and less predictable than for tyramine. Packing analysis discovered three dopamine-containing groups of structures that can be described as isostructural with regards to the cation positions. Two of these groups contain both dopamine and tyramine species, and one of these is also highly variable in other ways too, containing anhydrous and hydrated forms, different anion types and ionized and neutral phenylethylamine species. As such, the group illustrates that packing behaviour can be robust and similar even where intermolecular interactions such as hydrogen bonds are very different., (open access.)

Palladium salts and complexes were tested separately and in the presence of added ligands as potential sources of aryl radicals in ground-state coupling reactions of aryl halide with arenes under basic conditions (KO t Bu). Our recently developed assay for aryl radicals was employed to test for aryl radicals. In this assay, aryl radicals derived from the test substrate, 1-iodo-2,6-dimethylbenzene 7 , undergo base-promoted homolytic aromatic substitution (BHAS) with benzene to produce 2,6-dimethylbiphenyl 8 and biphenyl 9 in an approximately 1:4 ratio as well as m -xylene 10. The biphenyl arises from a diagnostic radical transfer reaction with the solvent benzene. Using substrate 7 with a range of Pd sources as potential initiators led to formation of 8 , 9 , and 10 in varying amounts. However, when any one of a range of diphosphinoferrocenes (e.g., dppf or dippf) or BINAP or the monophosphine, diphenylphosphinoferrocene, was added as a ligand to Pd(OAc) 2 , the ratio of [2,6-dimethylbiphenyl 8 : biphenyl 9 ] moved decisively to that expected from the BHAS (radical) pathway. Further studies were conducted with dppf. When dppf was added to each of the other Pd sources, the ratio of coupled products was also diverted to that expected for radical BHAS chemistry. Deuterium isotope studies and radical trap experiments provide strong additional support for the involvement of aryl radicals. Accordingly, under these ground-state conditions, palladium sources, in the presence of defined ligands, convert aryl iodides to aryl radicals. A rationale is proposed for these observations.

Cationic alkaline-earth complexes attract interest for their enhanced Lewis acidity and reactivity compared with their neutral counterparts. Synthetic protocols to these complexes generally utilize expensive specialized reagents in reactions generating multiple by-products. We have studied a simple ligand transfer approach to these complexes using (NacNac)MgR and ER 3 (NacNac = β-diketiminate anion; E = group 13 element; R = aryl/amido anion) which demonstrates high atom economy, opening up the ability to target these species in a more sustainable manner. The success of this methodology is dependent on the identity of the group 13 element with the heavier elements facilitating faster ligand exchange. Furthermore, while this reaction is successful with aromatic ligands such as phenyl and pyrrolyl, the secondary amide piperidide (pip) fails to transfer, which we attribute to the stronger 3-centre-4-electron dimerization interaction of Al 2 (pip) 6 .

Chiral molecules are known to behave as spin filters due to the chiral induced spin selectivity (CISS) effect. Chirality can be implemented in molecular semiconductors in order to study the role of the CISS effect in charge transport and to find new materials for spintronic applications. In this study, the design and synthesis of a new class of enantiopure chiral organic semiconductors based on the well-known dinaphtho[2,3-b:2,3-f]thieno[3,2-b]thiophene (DNTT) core functionalized with chiral alkyl side chains is presented. When introduced in an organic field-effect transistor (OFET) with magnetic contacts, the two enantiomers, (R)-DNTT and (S)-DNTT, show an opposite behavior with respect to the relative direction of the magnetization of the contacts, oriented by an external magnetic field. Each enantiomer displays an unexpectedly high magnetoresistance over one preferred orientation of the spin current injected from the magnetic contacts. The result is the first reported OFET in which the current can be switched on and off upon inversion of the direction of the applied external magnetic field. This work contributes to the general understanding of the CISS effect and opens new avenues for the introduction of organic materials in spintronic devices., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Catalytic reduction of a representative set of imines, both aldimines and ketimines, to amines has been studied using transfer hydrogenation from 1,4-dicyclohexadiene. Unusually, this has been achieved using s-block pre-catalysts, namely 1-metallo-2-tert-butyl-1,2-dihydropyridines, 2-tBuC 5 H 5 NM, M(tBuDHP), where M=Li-Cs. Reactions have been monitored in C 6 D 6 and tetrahydrofuran-d 8 (THF-d 8 ). A definite trend is observed in catalyst efficiency with the heavier alkali metal tBuDHPs outperforming the lighter congeners. In general, Cs(tBuDHP) is the optimal pre-catalyst with, in the best cases, reactions producing quantitative yields of amines in minutes at room temperature using 5 mol % catalyst. Supporting the experimental study, Density Functional Theory (DFT) calculations have also been carried out which reveal that Cs has a pathway with a significantly lower rate determining step than the Li congener. In the postulated initiation pathways DHP can act as either a base or as a surrogate hydride., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Exploiting bimetallic cooperation alkali-metal manganate (II) complexes can efficiently promote oxidative homocoupling of terminal alkynes furnishing an array of conjugated 1,3-diynes. The influence of the alkali-metal on these C-C bond forming processes has been studied by preparing and structurally characterizing the alkali-metal tetra(alkyl) manganates [(TMEDA) 2 Na 2 Mn(CH 2 SiMe 3 ) 4 ] and [(PMDETA) 2 K 2 Mn(CH 2 SiMe 3 ) 4 ]. Reactivity studies using phenylacetylene as a model substrate have revealed that for the homocoupling to take place initial metalation of the alkyne is required. In this regard, the lack of basicity of neutral Mn(CH 2 SiMe 3 ) 2 precludes the formation of the diyne. Contrastingly, the tetra(alkyl) alkali-metal manganates behave as polybasic reagents, being able to easily deprotonate phenylacetylene yielding [{(THF) 4 Na 2 Mn(C≡CPh) 4 } ∞ ] and [(THF) 4 Li 2 Mn(C≡CPh) 4 ]. Controlled exposure of [{(THF) 4 Na 2 Mn(C≡CPh) 4 } ∞ ] and [(THF) 4 Li 2 Mn(C≡CPh) 4 ] to dry air confirmed their intermediary in formation of 1,4-diphenyl-1,3-butadiyne in excellent yields. While the Na/Mn(II) partnership proved to be the most efficient in stoichiometric transformations, under catalytic regimes, the combination of MC≡CAr (M= Li, Na) and MnCl 2 (6 mol %) only works for lithium, most likely due to the degradation of alkynylsodiums under the aerobic reaction conditions., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Three new ligands containing a bicyclo[2.2.2]oct-7-ene-2,3,5,6-tetracarboxydiimide unit have been used to assemble lantern-type metal-organic cages with the general formula [Cu 4 L 4 ]. Functionalisation of the backbone of the ligands leads to distinct crystal packing motifs between the three cages, as observed with single-crystal X-ray diffraction. The three cages vary in their gas sorption behaviour, and the capacity of the materials for CO 2 is found to depend on the activation conditions: softer activation conditions lead to superior uptake, and one of the cages displays the highest BET surface area found for lantern-type cages so far., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

We report for the first time the crystal structure of an O-substituted diketopyrrolopyrrole and further evaluate computationally the ability of this higher-dimensionality system to act as a charge transfer mediator in optoelectronic devices., Competing Interests: The authors declare no competing financial interest., (© 2023 American Chemical Society.)

Purpose: The purpose of the studies described in this mini review article was to identify nontoxic compounds that could prevent or suppress the radiation induced malignant transformation of cells and be useful as human cancer preventive agents., Conclusions: (1) Many different types of potential anticarcinogenic substances were evaluated initially for their abilities to prevent or suppress radiation induced malignant transformation in vitro, and certain anticarcinogenic protease inhibitors (APIs) were observed to be the most powerful anticarcinogenic agents at suppressing this surrogate endpoint biomarker of radiation carcinogenesis. (2) Within the category of APIs, those that inhibited the activity of chymotrypsin were effective at far lower molar concentrations than other APIs. The soybean-derived protease inhibitor known as the Bowman-Birk inhibitor (BBI) is a particularly powerful chymotrypsin inhibitor that is able to prevent radiation induced transformation in vitro (at concentrations down to nanomolar levels) as well as radiation induced carcinogenesis in vivo without toxicity. (3) There were many other unusual characteristics of APIs that led to the selection of one of these APIs, BBI, as the most appropriate compound for us to develop as a human cancer preventive agent. As one example, the APIs have an irreversible effect on carcinogenesis, while the effects are reversible for most anticarcinogenic agents when they are removed from carcinogenesis assay systems. (4) Numerous studies were performed in attempts to determine the potential mechanisms by which the APIs could prevent or suppress radiation induced carcinogenesis in in vitro and in vivo systems, and the results of these studies are described in this review article. The APIs and the proteases which interact with them appear to play important roles in radiation carcinogenesis. (5) Preparations for human trials using BBI began decades ago. The cost of preparing purified BBI was far too high to consider performing human trials with this agent, so BBI Concentrate (BBIC), a soybean extract enriched in BBI, was developed for the specific purpose of performing human trials with BBI. BBIC achieved Investigational New Drug (IND) Status with the Food and Drug Administration in April,1992, and human BBIC trials began at that time. (6) Several human trials were performed using BBIC and they indicated many potentially beneficial health effects produced by BBIC administration to people in various forms (e.g. tablets). 7) It is hypothesized that BBI takes the place of α-1-antichymotrypsin, an important regulatory compound in the human body, and helps to maintain homeostasis.

We report the oxidative addition of phenylsilane to the complete series of alkali metal ( AM ) aluminyls [ AM {Al(NON Dipp )}] 2 ( AM = Li, Na, K, Rb, and Cs). Crystalline products ( 1-AM ) have been isolated as ether or THF adducts, [ AM (L) n ][Al(NON Dipp )(H)(SiH 2 Ph)] ( AM = Li, Na, K, Rb, L = Et 2 O, n = 1; AM = Cs, L = THF, n = 2). Further to this series, the novel rubidium rubidiate, [{Rb(THF) 4 } 2 (Rb{Al(NON Dipp )(H)(SiH 2 Ph)} 2 )] + [Rb{Al(NON Dipp )(H)(SiH 2 Ph)} 2 ] - , was isolated during an attempted recrystallization of Rb[Al(NON Dipp )(H)(SiH 2 Ph)] from a hexane/THF mixture. Structural and spectroscopic characterizations of the series 1-AM confirm the presence of μ-hydrides that bridge the aluminum and alkali metals ( AM ), with multiple stabilizing AM ···π(arene) interactions to either the Dipp- or Ph-substituents. These products form a complete series of soluble, alkali metal (hydrido) aluminates that present a platform for further reactivity studies.

The lattice dynamics of organic semiconductors has a significant role in determining their electronic and mechanical properties. A common technique to control these macroscopic properties is to chemically modify the molecular structure. These modifications are known to change the molecular packing, but their effect on the lattice dynamics is relatively unexplored. Therefore, we investigate how chemical modifications to a core [1]benzothieno[3,2- b ]benzothiophene (BTBT) semiconducting crystal affect the evolution of the crystal structural dynamics with temperature. Our study combines temperature-dependent polarization-orientation (PO) low-frequency Raman measurements with first-principles calculations and single-crystal X-ray diffraction measurements. We show that chemical modifications can indeed suppress specific expressions of vibrational anharmonicity in the lattice dynamics. Specifically, we detect in BTBT a gradual change in the PO Raman response with temperature, indicating a unique anharmonic expression. This anharmonic expression is suppressed in all examined chemically modified crystals (ditBu-BTBT and diC8-BTBT, diPh-BTBT, and DNTT). In addition, we observe solid-solid phase transitions in the alkyl-modified BTBTs. Our findings indicate that π-conjugated chemical modifications are the most effective in suppressing these anharmonic effects., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

As shown by X-ray crystallography, crystals of 3β-acetoxy-16,17-seco-17,20-dioxopregn-5-ene-16-nitrile are dimorphic. The regioselectivity of the Norrish-Yang type II photocyclization under visible light of this steroidal 1,2-diketone, which bears primary, secondary, and tertiary nonequivalent abstractable γ-hydrogens, dramatically increases in the crystalline state of both polymorphs. X-ray crystallography and molecular mechanics calculations reveal crystal structure-solid state photochemistry relationships.

Rare examples of heavier alkali metal manganates [{(AM)Mn(CH 2 SiMe 3 )(N 'Ar ) 2 } ∞ ] (AM=K, Rb, or Cs) [N 'Ar =N(SiMe 3 )(Dipp), where Dipp=2,6-iPr 2 -C 6 H 3 ] have been synthesised with the Rb and Cs examples crystallographically characterised. These heaviest manganates crystallise as polymeric zig-zag chains propagated by AM⋅⋅⋅π-arene interactions. Key to their preparation is to avoid Lewis base donor solvents. In contrast, using multidentate nitrogen donors encourages ligand scrambling leading to redistribution of these bimetallic manganate compounds into their corresponding homometallic species as witnessed for the complete Li - Cs series. Adding to the few known crystallographically characterised unsolvated and solvated rubidium and caesium s-block metal amides, six new derivatives ([{AM(N 'Ar )} ∞ ], [{AM(N 'Ar )⋅TMEDA} ∞ ], and [{AM(N 'Ar )⋅PMDETA} ∞ ] where AM=Rb or Cs) have been structurally authenticated. Utilising monodentate diethyl ether as a donor, it was also possible to isolate and crystallographically characterise sodium manganate [(Et 2 O) 2 Na( n Bu)Mn[(N 'Ar ) 2 ], a monomeric, dinuclear structure prevented from aggregating by two blocking ether ligands bound to sodium., (© 2022 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

A series of group 1 hydrocarbon-soluble donor free aluminates [AM( t BuDHP)(TMP)Al( i Bu) 2 ] (AM=Li, Na, K, Rb) have been synthesised by combining an alkali metal dihydropyridyl unit [(2- t BuC 5 H 5 N)AM)] containing a surrogate hydride (sp 3 C-H) with [( i Bu) 2 Al(TMP)]. These aluminates have been characterised by X-ray crystallography and NMR spectroscopy. While the lithium aluminate forms a monomer, the heavier alkali metal aluminates exist as polymeric chains propagated by non-covalent interactions between the alkali metal cations and the alkyldihydropyridyl units. Solvates [(THF)Li( t BuDHP)(TMP)Al( i Bu) 2 ] and [(TMEDA)Na( t BuDHP)(TMP)Al( i Bu) 2 ] have also been crystallographically characterised. Theoretical calculations show how the dispersion forces tend to increase on moving from Li to Rb, as opposed to the electrostatic forces of stabilization, which are orders of magnitude more significant. Having unique structural features, these bimetallic compounds can be considered as starting points for exploring unique reactivity trends as alkali-metal-aluminium hydride surrog[ATES]., (© 2022 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Introduction of adamantane moieties on diamondoids such as adamantane, 2-azaadamantane or diamantane by amide formation and reduction to the corresponding amine was performed in a straightforward and easy way by amidation under Schotten-Baumann conditions and reduction with BH 3  ⋅ THF. The obtained amides and amines were studied in terms of structural properties towards the perspective of transformation into nanodiamonds. Crystal structure and dynamic NMR experiments of the most crowded amide obtained gave structural insights into the effect of bulkiness and steric strain on out-of-planarity of amide bonds (16.0°) and the kinetics and thermodynamics of amide bond rotation (ΔG ≠ 298K =11.5-13.3 kcal ⋅ mol -1 )., (© 2022 The Authors. Published by Wiley-VCH GmbH.)

Many molecular crystals (approximately one third) grow as twisted, helicoidal ribbons from the melt, and this preponderance is even higher in restricted classes of materials, for instance, charge-transfer complexes. Previously, twisted crystallites of such complexes present an increase in carrier mobilities. Here, the effect of twisting on charge mobility is better analyzed for a monocomponent organic semiconductor, 2,5-bis(3-dodecyl-2-thienyl)-thiazolo[5,4-d]thiazole (BDT), that forms twisted crystals with varied helicoidal pitches and makes possible a correlation of twist strength with carrier mobility. Films are analyzed by X-ray scattering and Mueller matrix polarimetry to characterize the microscale organization of the polycrystalline ensembles. Carrier mobilities of organic field-effect transistors are five times higher when the crystals are grown with the smallest pitches (most twisted), compared to those with the largest pitches, along the fiber elongation direction. A tenfold increase is observed along the perpendicular direction. Simulation of electrical potential based on scanning electron microscopy images and density functional theory suggests that the twisting-enhanced mobility is mainly controlled by the fiber organization in the film. A greater number of tightly packed twisted fibers separated by numerous smaller gaps permit better charge transport over the film surface compared to fewer big crystallites separated by larger gaps., (© 2022 Wiley-VCH GmbH.)

The charge transport of crystalline organic semiconductors is limited by dynamic disorder that tends to localize charges. It is the main hurdle to overcome in order to significantly increase charge carrier mobility. An innovative design that combines a chemical structure based on sulfur-rich thienoacene with a solid-state herringbone (HB) packing is proposed and the synthesis, physicochemical characterization, and charge transport properties of two new thienoacenes bearing a central tetrathienyl core fused with two external naphthyl rings: naphtho[2,3-b]thieno-[2''',3''':4'',5'']thieno[2″,3″:4',5']thieno[3',2'-b]naphtho[2,3-b]thiophene (DN4T) and naphtho[1,2-b]thieno-[2''',3''':4'',5'']thieno[2'',3'':4',5']thieno[3',2'-b]naphtho[1,2-b]thiophene are presented. Both compounds crystallize with a HB pattern structure and present transfer integrals ranging from 33 to 99 meV (for the former) within the HB plane of charge transport. Molecular dynamics simulations point toward an efficient resilience of the transfer integrals to the intermolecular sliding motion commonly responsible for strong variations of the electronic coupling in the crystal. Best device performances are reached with DN4T with hole mobility up to μ = 2.1 cm 2 V -1 s -1 in polycrystalline organic field effect transistors, showing the effectiveness of the electronic coupling enabled by the new aromatic core. These promising results pave the way to the design of high-performing materials based on this new thienoacene, notably through the introduction of alkyl side-chains., (© 2022 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Combining a bulky bis(amide) and a reactive one-coordinate TMP (2,2,6,6-tetramethylpiperidide) ligand, a new mixed K/Zn heteroleptic base has been developed for regioselective zincation of fluoroarenes. This special ligand set allows for trapping and structural authentication of the first intermediates of direct Zn-H exchange of fluoroarenes obtained via deprotonative metallation, providing mechanistic insights of the processes involved.

We report here the application of silyl enol ether moieties as efficient alkene coupling partners within cobalt-mediated intramolecular Pauson-Khand reactions. This cyclization strategy delivers synthetically valuable oxygenated cyclopentenone products in yields of ≤93% from both ketone- and aldehyde-derived silyl enol ethers, incorporates both terminal and internal alkyne partners, and delivers a variety of decorated systems, including more complex tricyclic structures. Facile removal of the silyl protecting group reveals oxygenated sites for potential further elaboration.

A modular approach to prepare tri- and tetracyclic carbazoles by a sequential [3 + 2]heteroannulation is described. First, optimization of Pd-catalyzed Buchwald-Hartwig amination followed by C/N-arylation in a one-pot process is established. Second, mechanistic analyses identified the origins of chemo- and regioselective sequential control of both bond-forming steps. Finally, the substrate scope is demonstrated by the preparation of a range of tri- and tetracyclic carbazoles, including expedient access to several natural products and anti-cancer agents.