Search

Objectives To investigate the effects of selection and group socialisation on support of human rights, moral reasoning and prejudice in police officers in Taiwan. Methods We used a longitudinal quasi-experimental design to track three cohorts of police officers (n = 585) and a comparison group of criminology undergraduates (n = 43). Results There were no statistically significant differences in measures of human rights, moral reasoning and prejudice between new police recruits and the control group. However, time in police education was associated with a statistically significant reduction in police officer support of human rights, moral reasoning and an increase in prejudice. In the control group, the reverse was true. Conclusions Exposure to police education in Taiwan resulted in police officers being significantly more prejudiced and significantly less adherent to the principles of human rights and moral reasoning. These results appear to be attributable to police socialisation rather than selection effects.

During differentiation, skeletal muscle develops mature multinucleated muscle fibers, which could contract to exert force on a substrate. Muscle dysfunction occurs progressively in patients with muscular dystrophy, leading to a loss of the ability to walk and eventually to death. The synthetic glucocorticoid dexamethasone (Dex) has been used therapeutically to treat muscular dystrophy by an inhibition of inflammation, followed by slowing muscle degeneration and stabilizing muscle strength. Here, in mice with muscle injury, we found that Dex significantly promotes muscle regeneration via promoting kinesin-1 motor activity. Nevertheless, how Dex promotes myogenesis through kinesin-1 motors remains unclear. We found that Dex directly increases kinesin-1 motor activity, which is required for the expression of a myogenic marker (muscle myosin heavy chain 1/2), and also for the process of myoblast fusion and the formation of polarized myotubes. Upon differentiation, kinesin-1 mediates the recruitment of integrin β1 onto microtubules allowing delivery of the protein into focal adhesions. Integrin β1-mediated focal adhesion signaling then guides myoblast fusion towards a polarized morphology. By imposing geometric constrains via micropatterns, we have proved that cell adhesion is able to rescue the defects caused by kinesin-1 inhibition during the process of myogenesis. These discoveries reveal a mechanism by which Dex is able to promote myogenesis, and lead us towards approaches that are more efficient in improving skeletal muscle regeneration.

Studies of electric effects in biological systems, from the historical experiments of Galvani 1 and the ground-breaking work on action potential2 to studies on limb regeneration3 or wound healing4, share the common feature of being concerned with transitory behavior and not addressing the question of homeostasis. Here using a novel microfluidic device, we study how the homeostasis of confluent epithelial tissues is modified when a trans-epithelial electric potential (TEPD) different from the natural one is imposed on an epithelial layer. We show that epithelial fate is dependent on TEPD of few Volts/cm similar to the endogenous one. When the field direction matches the natural one, we can restore a perfect confluence in an epithelial layer turned defective either by E-cadherin knock-out or by weakening cell-substrate adhesion; additionally, the tissue pushes on the substrate with kilo-Pascals stress, inducing active cell response such as death and differentiation. When the field is opposite, homeostasis is destroyed by the perturbation of junctional actin and cell shapes, and the formation of dynamical mounds5, while the tissue pulls with similar strengths. Most of these observations can be quantitatively explained by an electro-hydrodynamic theory involving local electro-osmotic flows. We expect this work to motivate further studies on long time effects of electromechanical pathways with important tissue engineering applications.

Tissue engineering scaffolds provide mechanical supports and microenvironment for cells to grow in the third dimensionality (3D). Inspired by the recent advance to fabricate monodisperse foam scaffold by self-assembly of monodisperse liquid foam created by the microfluidic method, we investigated the mechanical properties of an open-cell solid foam with pores packed in the face-centered cubic (FCC) structure. We first characterized the microstructural geometry of solid foam with different porosities made by the microfluidic technique. We then developed both analytical and finite element method (FEM) models based on the measured geometric features. We computed mechanical parameters such as the elastic modulus, Poisson's ratio, and the shear modulus. Finally, we performed mechanical measurements of FCC solid foam fabricated by a 3D printer. All experimental, analytical, and numerical results show good agreement, which validate the FEM models.

Summary Recently, many super-resolution technologies have been demonstrated, significantly affecting biological studies by observation of cellular structures down to nanometer precision. However, current super-resolution techniques mostly rely on wavefront engineering or wide-field imaging of signal blinking or fluctuation, and thus imaging depths are limited due to tissue scattering or aberration. Here we present a technique that is capable of imaging through an intact Drosophila brain with 20-nm lateral resolution at ∼200 μm depth. The spatial resolution is provided by molecular localization of a photoconvertible fluorescent protein Kaede, whose red form is found to exhibit blinking state. The deep-tissue observation is enabled by optical sectioning of spinning disk microscopy, as well as reduced scattering from optical clearing. Together these techniques are readily available for many biologists, providing three-dimensional resolution of densely entangled dendritic fibers in a complete Drosophila brain. The method paves the way toward whole-brain neural network studies and is applicable to other high-resolution bioimaging., Graphical Abstract, Highlights • Spatial resolution of 20 nm at ∼ 200 μm imaging depth (may be extended) • Super-resolution tracking of densely entangled neural fibers in an intact brain • All tools (FP, confocal, clearing, localization) are commercially available, Optical Imaging; Neuroscience; Techniques in Neuroscience

Atomic force microscopy (AFM) is becoming an increasingly popular method for studying cell mechanics, however the existing analysis tools for determining the elastic modulus from indentation experiments are unable to quantitatively account for mechanical heterogeneity commonly found in biological samples. In this work, we numerically calculated force-indentation curves onto two-layered elastic materials using an analytic model. We found that the effect of the underlying substrate can be quantitatively predicted by the mismatch in elastic moduli and the homogeneous-case contact radius relative to the layer height for all tested probe geometries. The effect is analogous to one-dimensional Hookean springs in series and was phenomenologically modeled to obtain an approximate closed-form equation for the indentation force onto a two-layered elastic material which is accurate for up to two orders of magnitude mismatch in Young's modulus when the contact radius is less than the layer height. We performed finite element analysis simulations to verify the model and AFM microindentation experiments and macroindentation experiments to demonstrate its ability to deconvolute the Young's modulus of each layer. The model can be broadly used to quantify and serve as a guideline for designing and interpreting indentation experiments into mechanically heterogeneous samples.

Human mesenchymal stem cells (hMSCs) possess potential of bone formation and were proposed as ideal material against osteoporosis. Although interrogation of directing effect on lineage specification by physical cues has been proposed, how mechanical stimulation impacts intracellular viscoelasticity during osteogenesis remained enigmatic. Cyto-friendly 3D matrix was prepared with polyacrylamide and conjugated fibronectin. The hMSCs were injected with fluorescent beads and chemically-induced toward osteogenesis. The mechanical properties were assessed using video particle tracking microrheology. Inverted epifluorescence microscope was exploited to capture the Brownian trajectory of hMSCs. Mean square displacement was calculated and transformed into intracellular viscoelasticity. Two different stiffness of microspheres (12 kPa, 1 kPa) were established. A total of 45 cells were assessed. hMSCs possessed equivalent mechanical traits initially in the first week, while cells cultured in rigid matrix displayed significant elevation over elastic (G’) and viscous moduli (G”) on day 7 (p &lt, 0.01) and 14 (p &lt, 0.01). However, after two weeks, soft niches no longer stiffened hMSCs, whereas the effect by rigid substrates was consistently during the entire differentiation course. Stiffness of matrix impacted the viscoelasticity of hMSCs. Detailed recognition of how microenvironment impacts mechanical properties and differentiation of hMSCs will facilitate the advancement of tissue engineering and regenerative medicine.

Microwell arrays have emerged as three-dimensional substrates for cell culture due to their simplicity of fabrication and promise for high-throughput applications such as 3D cell-based assays for drug screening. To date, most microwells have had cylindrical geometries. Motivated by our previous findings that cells display 3D physiological characteristics when grown in the spherical micropores of monodisperse foam scaffolds (Lee et al 2013 Integr. Biol. 5 1447–55 and Lin et al 2011 Soft Matter 7 10010–6), here we engineered novel microwells shaped as spherical caps with obtuse polar angles, yielding narrow apertures. When used as bare substrates, these microwells were suitable for culturing cell spheroids; the narrow apertures sterically hindered unattached cultured cells from rolling out of microwells under agitation. When only the walls of the microwell were conjugated with extracellular matrix proteins, cells remained confined in the microwells. Epithelial cells proliferated and burst out of the aperture, and cell polarity was oriented based on the distribution of extracellular matrix proteins in the microwells. Surprisingly, single fibroblast cells in spherical wells of various diameters (40–100 μm) underwent cell-cycle arrest, while cells in circular cylindrical microwells continued to proliferate. Spatial confinement was not sufficient to cause cell-cycle arrest; however, confinement in a constant negative-curvature microenvironment led to cell-cycle arrest. Overall, these investigations demonstrate that this spherical microwell substrate constitutes a novel basic research tool for elucidating how cells respond to dimensionality and microenvironment with radii of curvature at the cellular length scale.

Recently, many super-resolution technologies were demonstrated, significantly impacting biological studies by observation of cellular structures down to nanometer precision. However, current super-resolution techniques mostly rely on wavefront engineering or wide-field imaging of signal blinking/fluctuation, and thus imaging depth are limited due to tissue scattering/aberration. Here we present a technique that is capable to image through an intact Drosophila brain with 20 nm lateral resolution at ~200 μm depth. The spatial resolution is provided by molecular localization of a photoconvertible fluorescent protein Kaede, whose blinking state is reported for the first time. The deep-tissue observation is enabled by optical sectioning of spinning disk microscopy, as well as reduced scattering of optical clearing. Together these techniques are readily available for many biologists, providing three-dimensionally resolution of densely entangled dendritic fibers in a complete Drosophila brain. The method paves the way toward whole-brain neural network studies, and is applicable to other high-resolution bio-imaging.

In this paper we investigate the validity of the Hertz theory at very large deformations by performing rigid spherical indentation on soft, linearly elastic silicone substrates using nanoindentation tests and finite element method. We show that the theory significantly underestimates and overestimates the contact radius and maximum contact pressure, respectively, as the ratio of indenter displacement δ to the indenter radius R exceeds 0.1. However, the loading load–displacement relation still holds ( 10. Our results may provide practical guidelines to proper sample preparation and better interpretation of indentation data of elastic soft elastomers and gels.

Osteogenic potential of mesenchymal stromal cells (MSCs) is mechanosensitive. It’s affected by the mechanical properties of the cellular microenvironment, particularly its mechanical modulus. To explore the effect of mechanical modulus on osteogenesis in the third dimension (3D), this study used a novel polyacrylamide (PA) scaffold whose pores are monodisperse and spherical, the mechanical moduli of which can be tuned across a wide range. It was found that MSCs have similar proliferation rates in PA scaffolds independent of the matrix stiffness. The contractile force exerted by MSCs inside PA scaffolds was strong enough to deform the pores of scaffolds made of more compliant PAs (whose shear modulus, G scaffold ′ G scaffold ′ = 12 kPa) can withhold the contraction from MSCs. After osteogenic induction for 21 days, the expression profiles of marker genes showed that PA scaffolds of G scaffold ′ = 12 kPa promoted osteogenesis of MSCs. Confocal image analysis demonstrated that there are more F-actin cytoskeletons and bundled stress fibers at higher matrix moduli in 2D and 3D. Moreover, the 3D porous structure promotes osteogenesis of MSCs more than 2D flat substrates. Together, the differences of cellular behaviors when cultured in 2D and 3D systems are evident. The PA scaffolds developed in the present study can be used for further investigation into the mechanism of MSC mechanosensing in the 3D context. Statement of Significance Mechanical properties of the microenvironment affect cellular behaviors, such as matrix stiffness. Traditionally, cell biological investigations have mostly employed cells growing on 2D substrates. The 3D porous PA scaffolds with the same topological conformation and pore sizes but different stiffness generated in this study showed that the differences of cellular behaviors in 2D and 3D systems are evident. Our 3D scaffolds provide insights into tissue engineering when stem cells incorporated with 3D scaffolds and support the future studies of cellular mechanobiology as well as the elucidation the role mechanical factor plays on the physiology and fate determination of MSCs in the 3D context.

Cell migration is a critical process during development, tissue repair, and cancer metastasis. It requires complex processes of cell adhesion, cytoskeletal dynamics, and force generation. Lis1 plays an important role in the migration of neurons, fibroblasts and other cell types, and is essential for normal development of the cerebral cortex. Mutations in human LIS1 gene cause classical lissencephaly (smooth brain), resulting from defects in neuronal migration. However, how Lis1 may affect force generation in migrating cells is still not fully understood. Using traction force microscopy (TFM) with live cell imaging to measure cellular traction force in migrating NIH3T3 cells, we showed that Lis1 knockdown (KD) by RNA interference (RNAi) caused reductions in cell migration and traction force against the extracellular matrix (ECM). Immunostaining of cytoskeletal components in Lis1 KD cells showed disorganization of microtubules and actin filaments. Interestingly, focal adhesions at the cell periphery were significantly reduced. These results suggest that Lis1 is important for cellular traction force generation through the regulation of cytoskeleton organization and focal adhesion formation in migrating cells.

Matrix nanotopography plays an important role in regulating cell behaviors by providing spatial as well as mechanical cues for cells to sense. It has been proposed that nanoscale topography is possible to modulate the tensions which direct the formation of cytoskeleton and the organization of the membrane receptor within the cell, which in turn regulate intracellular mechanical and biochemical signaling. With current studies on this topic being performed mainly in 2D platforms, the question on how nanotopography can influence cell bahaviors in 3D environments has yet to be addressed. In this paper, we explored this question by placing cells in 3D hollow spherical polydimethylsiloxane scaffolds. After culturing rat embryonic fibroblast cells in two kinds of scaffold, one with smooth surface and the other with numerous nano-spikes, we observed that cells in the smooth scaffold have more anchoring sites and more focal adhesions than in the etched scaffold. Moreover, we found the presence of correlation between cortical actin, the important component for supporting cell attachment, and local cell geometry. MOE (Min. of Education, S’pore)

A tissue engineering chondrocytes/scaffold construct provides a promise to cartilage regeneration. The architecture of a scaffold such as interconnections, porosities, and pore sizes influences the fates of seeding cells including gene expression, survival, migration, proliferation, and differentiation thus may determine the success of this approach. Scaffolds of highly ordered and uniform structures are desirable to control cellular behaviors. In this study, a newly designed microfluidic device based on flow-focusing geometry was developed to fabricate gelatin scaffolds of ordered pores. In comparison with random foam scaffolds made by the conventional freeze-dried method, honeycomb-like scaffolds exhibit higher swelling ratio, porosity, and comparable compressive strength. In addition, chondrocytes grown in the honeycomb-like scaffolds had good cell viability, survival rate, glycosaminoglycans production, and a better proliferation than ones in freeze-dried scaffolds. Real-time PCR analysis showed that the mRNA expressions of aggrecan and collagen type II were up-regulated when chondrocytes cultured in honeycomb-like scaffolds rather than cells cultured as monolayer fashion. Oppositely, chondrocytes expressed collagen type II as monolayer culture when seeded in freeze-dried scaffolds. Histologic examinations revealed that cells produced proteoglycan and distributed uniformly in honeycomb-like scaffolds. Immunostaining showed protein expression of S-100 and collagen type II but negative for collagen type I and X, which represents the chondrocytes maintained normal phenotype. In conclusion, a highly ordered and honeycomb-like scaffold shows superior performance in cartilage tissue engineering. Biotechnol. Bioeng. 2014;111: 2338-2348. © 2014 Wiley Periodicals, Inc.

The inability to adequately vascularize tissues in vitro or in vivo is a major challenge in lung tissue engineering. A method that integrates stem cell research with 3D-scaffold engineering may provide a solution. We have successfully isolated mouse pulmonary stem/progenitor cells (mPSCs) by a two-step procedure and fabricated mPSC-compatible gelatin/microbubble-scaffolds using a 2-channel fluid jacket microfluidic device. We then integrated the cells and the scaffold to construct alveoli-like structures. The mPSCs expressed pro-angiogenic factors (e.g., b-FGF and VEGF) and induced angiogenesis in vitro in an endothelial cell tube formation assay. In addition, the mPSCs were able to proliferate along the inside of the scaffolds and differentiate into type-II and type-I pneumocytes The mPSC-seeded microbubble-scaffolds showed the potential for blood vessel formation in both a chick chorioallantoic membrane (CAM) assay and in experiments for subcutaneous implantation in severe combined immunodeficient (SCID) mice. Our results demonstrate that lung stem/progenitor cells together with gelatin microbubble-scaffolds promote angiogenesis as well as the differentiation of alveolar pneumocytes, resulting in an alveoli-like structure. These findings may help advance lung tissue engineering.

One of the major limitations of tissue-engineered cartilage is poor integration of chondrocytes and scaffold structures with recipient tissue. To overcome this limitation, an expandable scaffold with a honeycomb-like structure has been developed using microfluidic technology. In this study, we evaluated the performance of this expandable gelatin scaffold seeded with rabbit chondrocytes in vivo. The chondrocyte/scaffold constructs were implanted into regions of surgically introduced cylindrical osteochondral defects in rabbit femoral condyles. At 2, 4, and 6 months postsurgery, the implanted constructs were evaluated by gross and histological examinations. As expected, the osteochondral defects, which were untreated or transplanted with blank scaffolds, showed no signs of repair, whereas the defects transplanted with chondrocyte/scaffold constructs showed significant cartilage regeneration. Furthermore, the expandable scaffolds seeded with chondrocytes had more regenerated cartilage tissue and better integration with the recipient tissue than autologous chondrocyte implantation. Biomechanical tests revealed that the chondrocyte/scaffold group had the highest compressive strength among all groups at all three time points and endured a similar compressive force to normal cartilage after 6 months of implantation. Histological examinations revealed that the chondrocytes were distributed uniformly within the scaffolds, maintained a normal phenotype, and secreted functional components of the extracellular matrix. Histomorphometric assessment showed a remarkable total interface of up to 87% integration of the expandable scaffolds with the host tissue at 6 months postoperation. In conclusion, the expandable scaffolds improved chondrocyte/scaffold construct integration with the host tissue and were beneficial for cartilage repair.

Matrix nanotopography plays an important role in regulating cell morphology by providing spatial as well as mechanical cues for cells to sense, and cortical actin and focal adhesions are important to maintain cell morphology and resist deformation. Most studies were based on 2D substrate, it still remains unclear about the influence of nanotopography on cell morphology in 3D environment.We proposed an effective method to fabricate hollow spherical PDMS scaffold whose topography could be determined by different etching of mold, the polystyrene microspheres. After culturing REF cells in two kinds of scaffold, one with smooth surface and the other one with numerous nano spikes, we found cells tend to attached more of its body to the smooth scaffold with more focal adhesions, while the cells in the etched scaffold with multiple nano spikes prefer to attach to less anchoring sites with reduced number of focal adhesions. Negative correlation was found between the absolute value of curvature and cortical actin intensity and high intensity actin were mostly concentrated in region Gaussian curvature close to 0, also highly-aligned stress fibers tend to be formed at such tube-like structure. Moreover, the major actin intensity and mean/Gaussian curvature distribution for cells in etched scaffold are concentrated in a smaller range with lower value, compared to the relative scattering major distribution for cells in unetched scaffold, meanwhile different parts of cell surface also exhibited specific range of surface curvature and actin intensity. Together, it suggests that 3D matrix topography would affect cell morphology as well as focal adhesions distribution, also there is close interplay between cell morphology and FAs, which together contribute to the regulation of actin distribution, and actin distribution would in turn influence cell morphology.

Tissue engineering for cartilage regeneration provides an alternative to surgery for degenerative osteoarthritis. Recently, a highly organized three-dimensional (3D) alginate scaffold was prepared using a microfluidic device; this scaffold is effective for chondrocyte culture in vitro. The performance of this scaffold was further demonstrated; an alginate scaffold seeded with porcine chondrocytes was implanted in the dorsal subcutaneous site of SCID mice. The recipients were sacrificed at 2, 4, and 6 weeks after transplantation. The grafted implants retrieved from the subcutaneous site were analyzed with histologic examinations. Real-time PCR was used to identify the gene expression patterns of the chondrocytes. The hematoxylin and eosin staining showed that the chondrocytes survived normally in SCID mice; cartilage-like structures were formed after 4 weeks implantation. Immunohistochemical staining revealed cells secreted type II collagen, produced glycosaminoglycans (proved by alcian blue stain), and maintained the expression of S-100. On the other hand, the cells were negative for type I and type X collagen staining. PCR showed that the mRNA expressions of aggrecan and type II collagen were up-regulated at weeks two and four, while type I and type X collagen were down-regulated during the study period. In summary, this highly organized 3D alginate scaffold provided a suitable environment and maintained functional phenotypes for chondrocytes in this animal study.

The spatial boundary condition (SBC) arising from the surrounding microenvironment imposes specific geometry and spatial constraints that affect organogenesis and tissue homeostasis. Mesenchymal stromal cells (MSCs) sensitively respond to alterations of mechanical cues generated from the SBC. However, mechanical cues provided by a three-dimensional (3D) environment are deprived in a reductionist 2D culture system. This study investigates how SBC affects osteogenic differentiation of MSCs using 3D scaffolds with monodispersed pores and homogenous spherical geometries. MSCs cultured under SBCs with diameters of 100 and 150 μm possessed the greatest capability of osteogenic differentiation. This phenomenon was strongly correlated with MSC morphology, organization of actin cytoskeleton and distribution of focal adhesion involving α2 and α5 integrins. Further silencing either α2 or α5 integrin significantly reduced the above mentioned mechanosensitivity, indicating that the α2 and α5 integrins as mechano-sensitive molecules mediate MSCs’ ability to provide enhanced osteogenic differentiation in response to different spherical SBCs. Taken together, the findings provide new insights regarding how MSCs respond to mechanical cues from the surrounding microenvironment in a spherical SBC and such biophysical stimuli should be taken into consideration in tissue engineering and regenerative medicine in conjunction with biochemical cues.

The merger of nanoscale building blocks with flexible and/or low cost substrates could enable the development of high-performance electronic and photonic devices with the potential to impact a broad spectrum of applications. Here we demonstrate that high-quality, single-crystal nanowires can be assembled onto inexpensive glass and flexible plastic substrates to create basic transistor and light-emitting diode devices. In our approach, the high-temperature synthesis of single-crystal nanowires is separated from ambient-temperature solution-based assembly to enable the fabrication of single-crystal-like devices on virtually any substrate. Silicon nanowire field-effect transistors were assembled on glass and plastic substrates and display device parameters rivaling those of single-crystal silicon and exceeding those of state-of-the-art amorphous silicon and organic transistors currently used for flexible electronics on plastic substrates. Nanowire transistor devices have been configured as low-threshold logi...

We have incorporated nematic liquid crystal into periodic, polymer host structures templated from self-assembled colloids. Using these composite materials, we demonstrate the first electrically switchable three-dimensional Bragg diffraction. The switchable beam deflection is potentially useful for non-mechanical beam steering and optical beam splitting devices. We compare the electro-optic response of our templated liquid-crystal/polymer composites with conventional polymer-dispersed liquid crystals (PDLCs). Our data reveal a qualitatively different and faster response for liquid crystal distributed within a connected cavity network, as compared to isolated liquid-crystal droplets within a polymer matrix.

We developed a microfluidic device to culture cellular spheroids of controlled sizes and suitable for live cell imaging by selective plane illumination microscopy (SPIM). We cocultured human umbilical vein endothelial cells (HUVECs) within the spheroids formed by hepatocellular carcinoma cells, and studied the distributions of the HUVECs over time. We observed that the migration of HUVECs depended on the size of spheroids. In the spheroids of ∼200 μm diameters, HUVECs migrated outwards to the edges within 48 h; while in the spheroids of ∼250 μm diameters, there was no outward migration of the HUVECs up to 72 h. In addition, we studied the effects of pro-angiogenic factors, namely, vascular endothelial growth factor (VEGF) and fibroblast growth factor (β-FGF), on the migration of HUVECs in the carcinoma cell spheroid. The outward migration of HUVECs in 200 μm spheroids was hindered by the treatment with VEGF and β-FGF. Moreover, some of the HUVECs formed hollow lumen within 72 h under VEGF and β-FGF treatment. The combination of SPIM and microfluidic devices gives high resolution in both spatial and temporal domains. The observation of HUVECs in spheroids provides us insight on tumor vascularization, an ideal disease model for drug screening and fundamental studies.

A tissue engineering chondrocytes/scaffold construct provides a promise to cartilage regeneration. The architecture of a scaffold such as interconnections, porosities, and pore sizes influences the fates of seeding cells including gene expression, survival, migration, proliferation, and differentiation thus may determine the success of this approach. Scaffolds of highly ordered and uniform structures are desirable to control cellular behaviors. In this study, a newly designed microfluidic device based on flow-focusing geometry was developed to fabricate gelatin scaffolds of ordered pores. In comparison with random foam scaffolds made by the conventional freeze-dried method, honeycomb-like scaffolds exhibit higher swelling ratio, porosity, and comparable compressive strength. In addition, chondrocytes grown in the honeycomb-like scaffolds had good cell viability, survival rate, glycosaminoglycans production, and a better proliferation than ones in freeze-dried scaffolds. Real-time PCR analysis showed that the mRNA expressions of aggrecan and collagen type II were up-regulated when chondrocytes cultured in honeycomb-like scaffolds rather than cells cultured as monolayer fashion. Oppositely, chondrocytes expressed collagen type II as monolayer culture when seeded in freeze-dried scaffolds. Histologic examinations revealed that cells produced proteoglycan and distributed uniformly in honeycomb-like scaffolds. Immunostaining showed protein expression of S-100 and collagen type II but negative for collagen type I and X, which represents the chondrocytes maintained normal phenotype. In conclusion, a highly ordered and honeycomb-like scaffold shows superior performance in cartilage tissue engineering. Biotechnol. Bioeng. 2014;111: 2338-2348. © 2014 Wiley Periodicals, Inc.

In this paper we present fundamental studies elucidating the role of entropy in parti- cle suspensions. We focus on systems composed of large colloidal particles along with a second, usually smaller species such as a particle or polymer. We describe direct measurements of these interactions in suspension, and we systematically show how these forces can be used to control the self-assembly of colloidal particles. The paper provides a unified review of the experiments from our laboratory, and in a few cases touches on very recent results. Entropic forces between macromolecules in suspension are sometimes produced by the addition of other constituents to the background solvent. These added con- stituents are often other (usually smaller) particles, rods or polymers. The resulting entropic forces influence suspension stability, and are of considerable importance in a wide variety of practical materials ranging from frozen desserts to paints to motor oils to living cells. During the last few years we have been studying entropic effects in suspension. We have quantified these forces by direct measurement in a variety of complex fluids, we have identified some novel manifestations of these entropic phe- nomena, and we have used these effects to control the self-assembly of particles. In this paper we provide a unified review of the experiments from our laboratory, and in a few cases touch on very recent results. The starting point of our exposition naturally begins with mixtures of large- and small-diameter hard spheres. Hard-sphere colloids lack attractive and long-range interactions, which typically compete with entropic effects to produce ordered phases. Nonetheless, as Asakura & Oosawa (1958) first noted, in mixtures of different-sized spherical particles, an ordered arrangement of large spheres can increase the total entropy of the system by increasing the entropy of the small spheres. This phe- nomenon is depicted in figure 1. Because the centre of mass of the small sphere

Traditionally, cell biological investigations have mostly employed cells growing on flat, two-dimensional, hard substrates, which are of questionable utility in mimicking microenvironments in vivo. We engineered a novel scaffold to achieve cell culture in the third dimension (3D), where fibroblasts lose the strong dorsal–ventral asymmetry in the distribution of cytoskeletal and adhesion components that is induced by growth on flat substrates. The design principle of our new 3D substrate was inspired by recent advances in engineering cellular microenvironments in which rigidity and the patterning of adhesion ligands were tuned on two-dimensional substrates; the engineered substrates enable independent control over biochemical and mechanical factors to elucidate how mechanical cues affect cellular behaviours. The 3D substrates consisted of polyacrylamide scaffolds of highly ordered, uniform pores coated with extracellular matrix proteins. We characterized important parameters for fabrication and the mechanical properties of polyacrylamide scaffolds. We then grew individual fibroblasts in the identical pores of the polyacrylamide scaffolds, examining cellular morphological, actin cytoskeletal, and adhesion properties. We found that fibroblasts sense the local rigidity of the scaffold, and exhibit a 3D distribution of actin cytoskeleton and adhesions that became more pronounced as the pore size was reduced. In small pores, we observed that elongated adhesions can exist without attachment to any solid support. Taken together, our results show that the use of negatively curved surfaces is a simple method to induce cell adhesions in 3D, opening up new degrees of freedom to explore cellular behaviours.

We demonstrate that square two-dimensional grating templates can drive the growth of three-dimensional, face-centered-cubic (fcc) colloidal crystals by convective assembly. The square symmetry [i.e., (100) planes parallel to the substrate] of the underlying template was transferred to the colloidal crystal and maintained throughout its growth of ∼50 layers. We characterized crystals grown on flat and on templated substrates using electron microscopy and small-angle x-ray scattering (SAXS). SAXS measurements of the templated samples clearly show fourfold diffraction patterns that arise from fcc domains without stacking faults.

Osteoarthritis is a degenerative disease and frequently involves the knee, hip and phalangeal joints. Current treatments used in small cartilage defects including multiple drilling, abrasion arthroplasty, mosaicplasty, and autogenous chondrocyte transplantation, however, there are problems needed to be solved. The standard treatment for severe osteoarthritis is total joint arthroplasty. The disadvantages of this surgery are the possibility of implant loosening. Therefore, tissue engineering for cartilage regeneration has become a promising topic. We have developed a new method to produce a highly organized single polymer (alginate) scaffold using microfluidic device. Scanning electron microscope and confocal fluoroscope examinations showed that the scaffold has a regular interconnected porous structure in the scale of 250 μm and high porosity. The scaffold is effective in chondrocyte culture; the cell viability test (WST-1 assay), cell toxicity (lactate dehydrogenase assay), cell survival rate, extracellular matrix production (glycosaminoglycans contents), cell proliferation (DNA quantification), and gene expression (real-time PCR) all revealed good results for chondrocyte culture. The chondrocytes can maintain normal phenotypes, highly express aggrecan and type II collagen, and secrete a great deal of extracellular matrix when seeded in the alginate scaffold. This study demonstrated that a highly organized alginate scaffold can be prepared with an economical microfluidic device, and this scaffold is effective in cartilage tissue engineering.

A new type of polymer-assisted self-assembly of nanospheres at a water-air interface was uncovered. By adding merely 1-3 ppm of polyethylene oxide in the water, the polystyrene nanospheres, applicable to diameters ranging from 100 nm to 1 μm, were found to gradually move closer to each other and eventually form a close-packed structure confirmed from its diffraction pattern. As it turns out, polyethylene oxides are adsorbed onto the surface of polystyrene nanospheres, giving rise to the effective screening of coulomb repulsive force between nanospheres followed by the onset of polymer-bridging effect as demonstrated from the strong suppression of Brownian motion. The resulting monolayer of close-packed polymer/nanospheres hybrid at the water-air interface with area size more than 1 cm(2) are robust and can be transferred to a substrate of any kind without serious breaking due to surface tension tearing. Our finding may provide a further extension to the scope of nanosphere lithography technique.

In this paper, we demonstrate for the first time the technique to using microfluidics to fabricate tissue engineering scaffolds with uniform pore sizes. We investigate both the bubble generation of the microfluidic device and the application of foam as a tissue engineering scaffold. Our microfluidic device consists of two concentric tapered channels, which are made by micropipettes. Nitrogen gas and aqueous alginate solution with Pluronic((R)) F127 surfactant are pumped through the inner and the outer channels, respectively. We observe rich dynamic patterns of bubbles encapsulated in the liquid droplets. The size of the bubble depends linearly on the gas pressure and inversely on the liquid flow rate. In addition, monodisperse bubbles self-assemble into crystalline structures. The liquid crystalline foams are further processed into open-cell solid foams. The novel foam gel was used as a scaffold to culture chondrocytes.

We study the packing of colloidal microspheres mixed with polymers in oil-in-water emulsion droplets by evaporation. The addition of polymers produces non-unique configurations of final clusters when the number of particles N inside the droplet is larger than 4. The cluster configurations are classified into three categories based on symmetry. Stablized colloidal clusters of spherical packings are observed. Our observations on packing process suggest the mechanisms which cause different and nonunique structures. The osmotic pressure and the interparticle interaction due to polymers changes the force balance between microspheres and result in different structures.

Development of miniaturized devices that enable rapid and direct analysis of the specific binding of small molecules to proteins could be of substantial importance to the discovery of and screening for new drug molecules. Here, we report highly sensitive and label-free direct electrical detection of small-molecule inhibitors of ATP binding to Abl by using silicon nanowire field-effect transistor devices. Abl, which is a protein tyrosine kinase whose constitutive activity is responsible for chronic myelogenous leukemia, was covalently linked to the surfaces of silicon nanowires within microfluidic channels to create active electrical devices. Concentration-dependent binding of ATP and concentration-dependent inhibition of ATP binding by the competitive small-molecule antagonist STI-571 (Gleevec) were assessed by monitoring the nanowire conductance. In addition, concentration-dependent inhibition of ATP binding was examined for four additional small molecules, including reported and previously unreported inhibitors. These studies demonstrate that the silicon nanowire devices can readily and rapidly distinguish the affinities of distinct small-molecule inhibitors and, thus, could serve as a technology platform for drug discovery.

We explore magnetic-field-induced ordering and microphase separation of aqueous ferrofluid and of aqueous mixtures of ferrofluid with nonmagnetic latex spheres. The ferrofluid is a surfactant stabilized aqueous suspension of magnetite $({\mathrm{Fe}}_{3}{\mathrm{O}}_{4})$ particles with average diameter 20 nm (including the $\ensuremath{\sim}2.5\ensuremath{-}\mathrm{nm}$ thick surfactant layer); the nonmagnetic latex spheres are charge stabilized polymethylmethacrylate (PMMA) particles with diameters of 42 nm, 108 nm, and 220 nm. In the presence of a uniform magnetic field, needlelike ferrofluid droplets formed that eventually grew to sample-traversing columns at fields of $\ensuremath{\sim}600\mathrm{G};$ the two-dimensional structure of these columns was, however, glassy rather than hexagonal. In higher fields, $\ensuremath{\sim}1000\mathrm{G},$ the columns stretched and coalesced into sheetlike striped liquids, but a true lamellar phase was not observed. The addition of nonmagnetic latex spheres to the ferrofluid suspension lowered substantially the critical field for the formation of columns, and induced lamellar (stripe) phases at relatively low applied fields. Image analysis was used to determine the spatial correlation functions, the average needle or column spacing, and the average lamellae spacing of these samples as a function of latex sphere size and concentration.

We compute the entropic interactions between two colloidal spheres immersed in a dilute suspension of semi-flexible rods. Our model treats the semi-flexible rod as a bent rod at fixed angle, set by the rod contour and persistence lengths. The entropic forces arising from this additional rotational degree of freedom are captured quantitatively by the model, and account for observations at short range in a recent experiment. Global fits to the interaction potential data suggest the persistence length of fd-virus is about two to three times smaller than the commonly used value of $2.2 \mu {m}$., Comment: 4 pages, 5 figures, submitted to PRE rapid communications

We report optical switching studies on nematic liquid crystal incorporated into structures based on self-assembled colloids. We compare the electro-optic responses of liquid crystal imbibed into colloid-templated polymers, liquid crystal imbibed in the interstitial space of colloid crystals, and conventional polymer-dispersed liquid crystals. We characterize the Bragg diffraction of our templated liquid-crystal/polymer composites as a function of electric field and measure switching times. The response of liquid crystal in connected networks differs qualitatively from that of liquid crystal in isolated cavities.

We report direct measurements of entropic interactions of colloidal spheres in suspensions of rodlike fd bacteriophage. We investigate the influence of sphere size, rod concentration, and ionic strength on these interactions. Although the results compare favorably with a recent calculation, small discrepancies reveal entropic effects due to rod flexibility. At high salt concentrations, the potential turns repulsive as a result of viral adsorption on the spheres and viral bridging between the spheres.

We investigate the self-assembly of colloidal spheres on periodically patterned templates. The surface potentials and the surface phases are induced entropically by the presence of dissolved, nonadsorbing polymers. A rich variety of two-dimensional fluidlike and solidlike phases was observed to form on template potentials with both one- and two-dimensional symmetry. The same methodology was then used to nucleate an oriented single fcc crystal more than 30 layers thick. The general approach provides a new route for directed self-assembly of novel mesoscopic structures.