Search

Each year, millions to trillions of data points are generated to evaluate the response of chemicals and biologicals to human cells in vitro and in vivo using various technologies and endpoints. Despite the vast amount of data available, the development process has not become significantly more efficient in recent years. Given the increasing use of more complex physiological models, which are time-consuming and significantly more expensive, it is crucial to maximize the value of these valuable data through improved standardization., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Molecularly targeted cancer therapies substantially improve patient outcomes, although the durability of their effectiveness can be limited. Resistance to these therapies is often related to adaptive changes in the target oncoprotein which reduce binding affinity. The arsenal of targeted cancer therapies, moreover, lacks coverage of several notorious oncoproteins with challenging features for inhibitor development. Degraders are a relatively new therapeutic modality which deplete the target protein by hijacking the cellular protein destruction machinery. Degraders offer several advantages for cancer therapy including resiliency to acquired mutations in the target protein, enhanced selectivity, lower dosing requirements, and the potential to abrogate oncogenic transcription factors and scaffolding proteins. Herein, we review the development of proteolysis targeting chimeras (PROTACs) for selected cancer therapy targets and their reported biological activities. The medicinal chemistry of PROTAC design has been a challenging area of active research, but the recent advances in the field will usher in an era of rational degrader design., (© 2023. This is a U.S. Government work and not under copyright protection in the US; foreign copyright protection may apply.)

Nitrogen (N) fixation in cereals by root-associated bacteria is a promising solution for reducing use of chemical N fertilizers in agriculture. However, plant and bacterial responses are unpredictable across environments. We hypothesized that cereal responses to N-fixing bacteria are dynamic, depending on N supply and time. To quantify the dynamics, a gnotobiotic, fabricated ecosystem (EcoFAB) was adapted to analyse N mass balance, to image shoot and root growth, and to measure gene expression of Brachypodium distachyon inoculated with the N-fixing bacterium Herbaspirillum seropedicae. Phenotyping throughput of EcoFAB-N was 25-30 plants h-1 with open software and imaging systems. Herbaspirillum seropedicae inoculation of B. distachyon shifted root and shoot growth, nitrate versus ammonium uptake, and gene expression with time; directions and magnitude depended on N availability. Primary roots were longer and root hairs shorter regardless of N, with stronger changes at low N. At higher N, H. seropedicae provided 11% of the total plant N that came from sources other than the seed or the nutrient solution. The time-resolved phenotypic and molecular data point to distinct modes of action: at 5 mM NH4NO3 the benefit appears through N fixation, while at 0.5 mM NH4NO3 the mechanism appears to be plant physiological, with H. seropedicae promoting uptake of N from the root medium.Future work could fine-tune plant and root-associated microorganisms to growth and nutrient dynamics., (© The Author(s) 2022. Published by Oxford University Press on behalf of the Society for Experimental Biology.)

The vast majority of cancer patients receive DNA-damaging drugs or ionizing radiation (IR) during their course of treatment, yet the efficacy of these therapies is tempered by DNA repair and DNA damage response (DDR) pathways. Aberrations in DNA repair and the DDR are observed in many cancer subtypes and can promote de novo carcinogenesis, genomic instability, and ensuing resistance to current cancer therapy. Additionally, stalled or collapsed DNA replication forks present a unique challenge to the double-strand DNA break (DSB) repair system. Of the various inducible DNA lesions, DSBs are the most lethal and thus desirable in the setting of cancer treatment. In mammalian cells, DSBs are typically repaired by the error prone non-homologous end joining pathway (NHEJ) or the high-fidelity homology directed repair (HDR) pathway. Targeting DSB repair pathways using small molecular inhibitors offers a promising mechanism to synergize DNA-damaging drugs and IR while selective inhibition of the NHEJ pathway can induce synthetic lethality in HDR-deficient cancer subtypes. Selective inhibitors of the NHEJ pathway and alternative DSB-repair pathways may also see future use in precision genome editing to direct repair of resulting DSBs created by the HDR pathway. In this review, we highlight the recent advances in the development of inhibitors of the non-phosphatidylinositol 3-kinase-related kinases (non-PIKKs) members of the NHEJ, HDR and minor backup SSA and alt-NHEJ DSB-repair pathways. The inhibitors described within this review target the non-PIKKs mediators of DSB repair including Ku70/80, Artemis, DNA Ligase IV, XRCC4, MRN complex, RPA, RAD51, RAD52, ERCC1-XPF, helicases, and DNA polymerase θ. While the DDR PIKKs remain intensely pursued as therapeutic targets, small molecule inhibition of non-PIKKs represents an emerging opportunity in drug discovery that offers considerable potential to impact cancer treatment., Competing Interests: KSP is a Vice-President of Research and JJT is a cofounder and CSO of NERx Biosciences. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Kelm, Samarbakhsh, Pillai, VanderVere-Carozza, Aruri, Pandey, Pawelczak, Turchi and Gavande.)

Three-dimensional (3D) cell culture models are thought to mimic the physiological and pharmacological properties of tissues in vivo more accurately than two-dimensional cultures on plastic dishes. For the development of cancer therapies, 3D spheroid models are being created to reflect the complex histology and physiology of primary tumors with the hopes that drug responses will be more similar to and as predictive as those obtained in vivo. The effect of additional cell types in tumors, such as stromal cells, and the resulting heterotypic cell-cell crosstalk can be investigated in these heterotypic 3D cell cultures. Here, a high-throughput screening-compatible drug testing platform based on 3D multicellular spheroid models is described that enables the parallel assessment of toxicity on stromal cells and efficacy on cancer cells by drug candidates. These heterotypic microtissue tumor models incorporate NIH3T3 fibroblasts as stromal cells that are engineered with a reporter gene encoding secreted NanoLUC luciferase. By tracking the NanoLUC signal in the media over time, a time-related measurement of the cytotoxic effects of drugs on stromal cells over the cancer cells was possible, thus enabling the identification of a therapeutic window. An in vitro therapeutic index parameter is proposed to help distinguish and classify those compounds with broad cytotoxic effects versus those that are more selective at targeting cancer cells.

Inflammation is one of the factors that may increase the sensitivity of hepatic cells to acetaminophen (APAP) induced toxicity. To investigate the mechanisms, we exposed 3-dimensional (3D) Human Liver Microtissues, a co-culture of primary human hepatocytes (PHH) and Kupffer cells (KCs), to 0, 0.5 (low), 5 (median) and 10 mM (high dose) APAP for 24 h, with/without lipopolysaccharide (LPS). Microarray-technology was used to evaluate the transcriptome changes. In the presence of LPS, the median-dose of APAP is sufficient to inhibit the expression of respiratory chain- and antioxidant-related genes, suggesting the involvement of reactive oxygen species (ROS) and oxidative stress. Furthermore, the median- and high-dose of APAP inhibited the expression of Fc fragment receptor (FcγR)-coding genes, regardless of the presence of LPS. The toll-like receptor 4 (TLR4) expression, however, was continuously elevated after the LPS/APAP co-exposures, which may result in reduced KC-phagocytosis and unbalanced cytokine patterns. Compared to the treatment with LPS only, LPS/APAP co-exposures induced the production of interleukin (IL)-8, a pro-inflammatory cytokine, but suppressed the secretion of IL-6, a cytokine regulating hepatic regeneration, along with the increase in APAP dosages. In addition to the disrupted mitochondrial functions, the presence of LPS exacerbated APAP toxicity. These findings suggest that 3D Microtissues are a suitable model for the mechanistic exploration of inflammation-associated drug toxicity., (Copyright © 2019 The Author(s). Published by Elsevier B.V. All rights reserved.)

As we witness steady progress towards the development of robust, scalable, and reproducible 3D tissue models for preclinical drug testing, there is a need for systematic physiological and pharmacological validation and benchmarking. Ongoing and future studies should generate evidence as to whether 3D tissue models are more predictive, help reduce the risk of failure rate, and can be used for decision making in the drug discovery and development pipeline. Here, we discuss the importance of harmonizing the validation of these models based on throughput capacity and physiological complexity as a requirement to establish their true translational capacity. We also outline our strategy for a novel 3D-tailored holistic drug discovery concept rather than piecemeal integration of 3D models into the current process., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Three-Dimensional (3D) liver microtissues, specifically prepared from primary human hepatocytes (PHH) in coculture with nonparenchymal cells (NPCs), have been shown to be a valuable tool for in vitro toxicology. However, a lack of thorough characterization on a functional, transcriptomic, and proteomic level of such models during long-term cultivation is evident. By integrating multiple omics technologies, we provide in this study an in-depth long-term characterization of 3D microtissues composed of PHH from three different donors cocultured with primary NPCs. The 3D human liver microtissues (hLiMTs) exhibited stable adenosine triphosphate (ATP) content and albumin secretion over 5 weeks. Histological analysis indicated a healthy liver tissue with polarized expression of bile salt export pump (BSEP) and multidrug resistance protein 2 (MRP2) in a structure reminiscent of bile canaliculi. The 3D microtissues exhibited stable basal and inducible cytochrome P450 activities up to 5 weeks in culture. Analysis of 40,716 transcripts using RNA arrays revealed distinct similarities to native human liver gene expression. Long-term culture showed a stable phenotype up to 5 weeks, with differences in liver gene expression primarily attributed to individual donors. Proteomic profiling of 2200 unique proteins by label-free LC-MS/MS revealed a relatively stable protein expression where only 7.3% were up- or downregulated more than twofold from day 7 to 35 in culture. Taken together, these results suggest that hLiMTs represent a responsive and physiologically relevant in vitro liver model that maintains stable function over 5 weeks and is therefore well suited for repeated-dose toxicity testing., Competing Interests: S.M., K.R., J.M.K., and W.M. are employees of InSphero AG. V.M.L. and M.I.-S. are cofounders and owners of HepaPredict AB., (© Simon Messner et al., 2018; Published by Mary Ann Liebert, Inc.)

This work evaluated gene expression differences between a hanging-drop 3D NSCLC model and 2D cell cultures and their in-vivo relevance by comparison to patient-derived data from The Cancer Genome Atlas. Gene expression of 2D and 3D cultures for Colo699 and A549 were assessed using Affymetrix HuGene 1.0 ST gene chips. Biostatistical analyses tested for reproducibility, comparability and significant differences in gene expression profiles between cell lines, experiments and culture methods. The analyses revealed a high interassay correlation within specific culture systems proving a high validity. 979 genes were altered in A549 and 1106 in Colo699 cells due to 3D cultivation. The overlap of changed genes between the cell lines was small (149), but the involved pathways in the reactome and GO- analyses showed a high overlap with DNA methylation, cell cycle, SIRT1, PKN1 pathway, DNA repair and oxidative stress as well known cancer-associated representatives. Additional specific GSEA-analyses revealed changes in immunologic and endothelial cell proliferation pathways, whereas hypoxic, EMT and angiogenic pathways were downregulated. Gene enrichment analyses showed 3D-induced gene up-regulations in the cell lines 38 to be represented in in-vivo samples of NSCLC patients using data of The Cancer Genome Atlas. Thus, our 3D NSCLC model might provide a tool for early drug development and investigation of microenvironment-associated mechanisms. However, this work also highlights the need for further individualization and model adaption to address remaining challenges., Competing Interests: CONFLICTS OF INTEREST J. M. Kelm is the Chief Technology Officer, Co-Founder & Member of the Management Team of Insphero. All other authors have no conflicts of interest to state.

Drug-induced liver injury (DILI) continues to be a major source of clinical attrition, precautionary warnings, and post-market withdrawal of drugs. Accordingly, there is a need for more predictive tools to assess hepatotoxicity risk in drug discovery. Three-dimensional (3D) spheroid hepatic cultures have emerged as promising tools to assess mechanisms of hepatotoxicity, as they demonstrate enhanced liver phenotype, metabolic activity, and stability in culture not attainable with conventional two-dimensional hepatic models. Increased sensitivity of these models to drug-induced cytotoxicity has been demonstrated with relatively small panels of hepatotoxicants. However, a comprehensive evaluation of these models is lacking. Here, the predictive value of 3D human liver microtissues (hLiMT) to identify known hepatotoxicants using a panel of 110 drugs with and without clinical DILI has been assessed in comparison to plated two-dimensional primary human hepatocytes (PHH). Compounds were treated long-term (14 days) in hLiMT and acutely (2 days) in PHH to assess drug-induced cytotoxicity over an 8-point concentration range to generate IC 50 values. Regardless of comparing IC 50 values or exposure-corrected margin of safety values, hLiMT demonstrated increased sensitivity in identifying known hepatotoxicants than PHH, while specificity was consistent across both assays. In addition, hLiMT out performed PHH in correctly classifying hepatotoxicants from different pharmacological classes of molecules. The hLiMT demonstrated sufficient capability to warrant exploratory liver injury biomarker investigation (miR-122, HMGB1, α-GST) in the cell-culture media. Taken together, this study represents the most comprehensive evaluation of 3D spheroid hepatic cultures up to now and supports their utility for hepatotoxicity risk assessment in drug discovery.

The tumour microenvironment and tumour angiogenesis play a critical role in the development and therapy of many cancers, but in vitro models reflecting these circumstances are rare. In this study, we describe the development of a novel tri-culture model, using non-small cell lung cancer (NSCLC) cell lines (A549 and Colo699) in combination with a fibroblast cell line (SV 80) and two different endothelial cell lines in a hanging drop technology. Endothelial cells aggregated either in small colonies in Colo699 containing microtissues or in tube like structures mainly in the stromal compartment of microtissues containing A549. An up-regulation of hypoxia and vimentin, ASMA and a downregulation of E-cadherin were observed in co- and tri-cultures compared to monocultures. Furthermore, a morphological alteration of A549 tumour cells resembling "signet ring cells" was observed in tri-cultures. The secretion of proangiogenic growth factors like vascular endothelial growth factor (VEGF) was measured in supernatants. Inhibition of these proangiogenic factors by using antiangiogenic drugs (bevacizumab and nindetanib) led to a significant decrease in migration of endothelial cells into microtissues. We demonstrate that our method is a promising tool for the generation of multicellular tumour microtissues and reflects in vivo conditions closer than 2D cell culture.

The complexity of the tumor microenvironment is difficult to mimic in vitro, particularly regarding tumor-host interactions. To enable better assessment of cancer immunotherapy agents in vitro, we developed a three-dimensional (3D) heterotypic spheroid model composed of tumor cells, fibroblasts, and immune cells. Drug targeting, efficient stimulation of immune cell infiltration, and specific elimination of tumor or fibroblast spheroid areas were demonstrated following treatment with a novel immunocytokine (interleukin-2 variant; IgG-IL2v) and tumor- or fibroblast-targeted T cell bispecific antibody (TCB). Following treatment with IgG-IL2v, activation of T cells, NK cells, and NKT cells was demonstrated by increased expression of the activation marker CD69 and enhanced cytokine secretion. The combination of TCBs with IgG-IL2v molecules was more effective than monotherapy, as shown by enhanced effects on immune cell infiltration; activation; increased cytokine secretion; and faster, more efficient elimination of targeted cells. This study demonstrates that the 3D heterotypic spheroid model provides a novel and versatile tool for in vitro evaluation of cancer immunotherapy agents and allows for assessment of additional aspects of the activity of cancer immunotherapy agents, including analysis of immune cell infiltration and drug targeting., Competing Interests: All authors except for Ramona Schlenker were salaried employees of Roche Glycart AG or InSphero AG when the work was performed. No other potential conflict of interest was reported. Ramona Schlenker has no conflict of interest to declare.

Background: The focus of the outlined work is the establishment of a three-dimensional lung model for various drug-screening applications., Methods: The non-small cell lung cancer (NSCLC) cell line Colo699 was cultivated as monolayer (2D) on plates for 5 days or as microtissues (3D) using a hanging-drop system for 5 and 10 days. Cells and microtissues were treated with afatinib (10-80 µM), cisplatin (100-800 µM) or vinorelbine (25-200 µM) for 24 or 48 hours (h). Cell proliferation and viability were analysed by intra-cellular adenosine triphosphate (ATP) and lactate dehydrogenase release (LDH) assays, annexin V/propidium iodide (PI) staining, and cell cycle determination. Microtissue morphology and size, as well as cell death were evaluated via phase contrast microscopy., Results: Our results demonstrate the valid determination of viability and cell death using established assays in the 3D system for drug testing. The comparison of ATP, LDH and cytometry data showed moderate (0.40) to very strong (0.99) correlations. Thereby, we observed partially significant differences in drug efficacy between microtissues and 2D cultures dependent from the applied treatment and read-out method. Altogether, microtissues developed resistance to cisplatin and vinorelbine; but remained more vulnerable to afatinib. These findings were confirmed with microscopy., Conclusion: In summary, we established an NSCLC 3D test system with multiple assays compatible for drug-testing applications of substances with different mechanisms of action. In addition, our data support the usage of microtissues as more accurate tools for drug-efficacy testing with the possibility of long-term cultivation and treatment.

Introduction: The interaction between the immune system and malignant diseases is a proven key target for cancer therapy. We describe an innovative 3D cell culture system comprising both immune and cancer cells to evaluate their interaction and immune cell infiltration to provide an innovative in vitro screening of immunomodulatory agents and biomarkers., Methods: 3D tumor microtissues were cultivated using a hanging drops system. Human non-small-cell lung cancer cell lines were incubated for 7 days to form microtissues. On day 5, peripheral blood mononuclear cells (PBMC) were added with or without interleukin-2 (IL-2) for 24 or 48h. Viability of cancer cells and the infiltrating PBMC subpopulations were investigated by flow cytometry. Aggregation of tumor cells and PBMC and the infiltration of the PBMC into the tumor microtissues were analyzed by immunohistochemistry. Quantification of infiltration was measured by applying the TissueFAXS system., Results: Immunohistochemistry revealed PBMC infiltration in all cell lines which increased under IL-2 stimulation. Analysis of infiltrating populations showed both lymphocyte subpopulations and monocytes within the tumor microtissues. In all three co-cultures, CD3+CD8+ and CD3+CD8+CD45R0+CD28+ lymphocytes were increased with IL-2, whereas CD3+CD8+CD45R0-CD28+ PBMCs were decreased with and without IL-2 stimulation., Conclusion: In summary, we present a novel cell culture system to study the interaction between cancer cells and immune cells in 3-dimensional microtissues. In addition, we report for the first time an in vitro infiltration assay based on 3D microtissues. This model has the potential to provide a tool for ex-vivo drug testing and biomarker screening of immunomodulatory agents., (Copyright © 2016 Elsevier GmbH. All rights reserved.)

A new generation of biomaterials focus on smart materials incorporating cells. Here, we describe a novel generation of synthetic nanofibrous implant functionalized with living microtissues for regenerative nanomedicine. The strategy designed here enhances the effectiveness of therapeutic implants compared to current approaches used in the clinic today based on single cells added to the implant.

Cardiomyocytes (CMs) are terminally differentiated cells in the adult heart, and ischemia and cardiotoxic compounds can lead to cell death and irreversible decline of cardiac function. As testing platforms, isolated organs and primary cells from rodents have been the standard in research and toxicology, but there is a need for better models that more faithfully recapitulate native human biology. Hence, a new in vitro model comprising the advantages of 3D cell culture and the availability of induced pluripotent stem cells (iPSCs) of human origin was developed and characterized. Human CMs derived from iPSCs were studied in standard 2D culture and as cardiac microtissues (MTs) formed in hanging drops. Two-dimensional cultures were examined using immunofluorescence microscopy and western blotting, while the cardiac MTs were subjected to immunofluorescence, contractility, and pharmacological investigations. iPSC-derived CMs in 2D culture showed well-formed myofibrils, cell-cell contacts positive for connexin-43, and other typical cardiac proteins. The cells reacted to prohypertrophic growth factors with a substantial increase in myofibrils and sarcomeric proteins. In hanging drop cultures, iPSC-derived CMs formed spheroidal MTs within 4 days, showing a homogeneous tissue structure with well-developed myofibrils extending throughout the whole spheroid without a necrotic core. MTs showed spontaneous contractions for more than 4 weeks that were recorded by optical motion tracking, sensitive to temperature and responsive to electrical pacing. Contractile pharmacology was tested with several agents known to modulate cardiac rate and viability. Calcium transients underlay the contractile activity and were also responsive to electrical stimulation, caffeine-induced Ca(2+) release, and extracellular calcium levels. A three-dimensional culture using iPSC-derived human CMs provides an organoid human-based cellular platform that is free of necrosis and recapitulates vital cardiac functionality, thereby providing a new and promising relevant model for the evaluation and development of new therapies and detection of cardiotoxicity.

Rational development of more physiologic in vitro models includes the design of robust and flexible 3D-microtissue-based multi-tissue devices, which allow for tissue-tissue interactions. The developed device consists of multiple microchambers interconnected by microchannels. Pre-formed spherical microtissues are loaded into the microchambers and cultured under continuous perfusion. Gravity-driven flow is generated from on-chip reservoirs through automated chip-tilting without any need for additional tubing and external pumps. This tilting concept allows for operating up to 48 devices in parallel in order to test various drug concentrations with a sufficient number of replicates. For a proof of concept, rat liver and colorectal tumor microtissues were interconnected on the chip and cultured during 8 days in the presence of the pro-drug cyclophosphamide. Cyclophosphamide has a significant impact on tumor growth but only after bio-activation by the liver. This effect was only observed in the perfused and interconnected co-cultures of different microtissue types on-chip, whereas the discontinuous transfer of supernatant via pipetting from static liver microtissues that have been treated with cyclophosphamide did not significantly affect tumor growth. The results indicate the utility and multi-tissue functionality of this platform. The importance of continuous medium circulation and tissue interaction is highlighted., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Background: Radiation resistance presents a challenge to the effective treatment of cancer. If therapeutic compounds were capable of resensitizing resistant tumours then a concurrent chemo-radiation treatment could be used to overcome radiation resistance., Methods: We have developed a phenotypic assay to investigate the response of radiation resistant breast cancer cells grown in 3D-microtissue spheroids to combinations of radiation and established chemotherapeutic drugs. The effects were quantified by real time high content imaging of GFP detection area over 14 days. Ten established chemotherapeutic drugs were tested for their ability to enhance the effects of radiation., Results: Of ten analysed chemotherapeutics, vinblastine was the most effective compound, with docetaxel and doxorubicine being less effective in combination with radiation. To investigate the response in a model closer to the in vivo situation we investigated the response of heterotypic 3D microtissues containing both fibroblasts and breast cancer cells. Drug treatment of these heterotypic 3D cultures confirmed treatment with radiation plus vinblastine to be additive in causing breast cancer growth inhibition. We have validated the screen by comparing radiation sensitizing effects of known chemotherapeutic agents. In both monotypic and heterotypic models the concurrent treatment of vinblastine and radiation proved more effective inhibitors of mammary cancer cell growth. The effective concentration range of both vinblastine and radiation are within the range used in treatment, suggesting the 3D model will offer a highly relevant screen for novel compounds., Conclusions: For the first time comfortable 3D cell-based phenotypic assay is available, that allows high throughput screening of compounds with radiation therapy modulating capacity, opening the field to drug discovery.

Industrial sectors perform toxicological assessments of their potential products to ensure human safety and to fulfill regulatory requirements. These assessments often involve animal testing, but ethical, cost, and time concerns, together with a ban on it in specific sectors, make appropriate in vitro systems indispensable in toxicology. In this study, we summarize the outcome of an EPAA (European Partnership of Alternatives to Animal Testing)-organized workshop on the use of stem cell-derived (SCD) systems in toxicology, with a focus on industrial applications. SCD systems, in particular, induced pluripotent stem cell-derived, provide physiological cell culture systems of easy access and amenable to a variety of assays. They also present the opportunity to apply the vast repository of existing nonclinical data for the understanding of in vitro to in vivo translation. SCD systems from several toxicologically relevant tissues exist; they generally recapitulate many aspects of physiology and respond to toxicological and pharmacological interventions. However, focused research is necessary to accelerate implementation of SCD systems in an industrial setting and subsequent use of such systems by regulatory authorities. Research is required into the phenotypic characterization of the systems, since methods and protocols for generating terminally differentiated SCD cells are still lacking. Organotypical 3D culture systems in bioreactors and microscale tissue engineering technologies should be fostered, as they promote and maintain differentiation and support coculture systems. They need further development and validation for their successful implementation in toxicity testing in industry. Analytical measures also need to be implemented to enable compound exposure and metabolism measurements for in vitro to in vivo extrapolation. The future of SCD toxicological tests will combine advanced cell culture technologies and biokinetic measurements to support regulatory and research applications. However, scientific and technical hurdles must be overcome before SCD in vitro methods undergo appropriate validation and become accepted in the regulatory arena.

In this article, we present a microfluidic platform, compatible with conventional 96-well formats, that enables facile and parallelized culturing and testing of spherical microtissues in a standard incubator. The platform can accommodate multiple microtissues (up to 66) of different cell types, formed externally by using the hanging-drop method, and enables microtissue interconnection through microfluidic channels for continuous media perfusion or dosage of substances. The platform contains 11 separate channels, and each channel has six tissue compartments. Primary rat liver tissues were cultured over 8 days, and multiple tumor tissues (HCT116) were exposed to various concentrations of 5-fluorouracil for platform characterization., (© 2014 Society for Laboratory Automation and Screening.)

Osteosarcoma (OS) is the most common primary malignant bone tumour in children and adolescents. Therapy today includes surgical removal of the tumour and neoadjuvant and adjuvant chemotherapy. The 5-year survival rates for patients with localised disease are between 50 and 70%, but in patients with metastases the prognosis remains poor (∼ 20%). The aim of this study was the development of a biological relevant OS 3D microtissue model, which is suitable for drug development. Microtissues were formed by the hanging drop method with the established OS cell lines SaOS-2, HOS and MG-63, as well as with cells derived from osteoblastic and chondroblastic OS patient material. Histological characterisation of the microtissues with H/E- and Ki-67-(proliferation), as well as apoptosis staining (TUNEL) revealed the inherent histological heterogeneity of OS. Microtissues from SaOS-2 and HOS cell lines were exposed to doxorubicin, cisplatin, taurolidine, pemetrexed and taxol and the viability was assessed by the CellTiter-GLO(®) Luminescent Cell Viability Assay. The obtained IC50-values for 3D cultures were all higher (1.7 to >16,000-fold) when compared to corresponding cells grown in 2D monolayer culture, except for pemetrexed that was inactive in 2D and 3D cultures. Doxorubicin did not affect the viability of chondroblastic monolayer cultures whereas on 3D microtissues an IC50-value of 2.3 μM was obtained. The 3D microtissues reflect the tissue heterogeneity of OS and are potential suitable tools for drug development towards personalised medicine., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Background: The liver has a crucial role in metabolic homeostasis as well as being the principal detoxification centre of the body, removing xenobiotics and waste products which could potentially include some nanomaterials (NM). With the ever increasing public and occupational exposure associated with accumulative production of nanomaterials, there is an urgent need to consider the possibility of detrimental health consequences of engineered NM exposure. It has been shown that exposure via inhalation, intratracheal instillation or ingestion can result in NM translocation to the liver. Traditional in vitro or ex vivo hepatic nanotoxicology models are often limiting and/or troublesome (i.e. reduced metabolism enzymes, lacking important cell populations, unstable with very high variability, etc.)., Methods: In order to rectify these issues and for the very first time we have utilised a 3D human liver microtissue model to investigate the toxicological effects associated with a single or multiple exposure of a panel of engineered NMs (Ag, ZnO, MWCNT and a positively charged TiO₂)., Results: Here we demonstrate that the repeated exposure of the NMs is more damaging to the liver tissue as in comparison to a single exposure with the adverse effects more significant following treatment with the Ag and ZnO as compared with the TiO₂ and MWCNT NMs (in terms of cytotoxicity, cytokine secretion, lipid peroxidation and genotoxicity)., Conclusions: Overall, this study demonstrates that the human microtissue model utilised herein is an excellent candidate for replacement of traditional in vitro single cell hepatic models and further progression of liver nanotoxicology.

Phenotypic heterogeneity of cancer cells, cell biological context, heterotypic crosstalk and the microenvironment are key determinants of the multistep process of tumor development. They sign responsible, to a significant extent, for the limited response and resistance of cancer cells to molecular-targeted therapies. Better functional knowledge of the complex intra- and intercellular signaling circuits underlying communication between the different cell types populating a tumor tissue and of the systemic and local factors that shape the tumor microenvironment is therefore imperative. Sophisticated 3D multicellular tumor spheroid (MCTS) systems provide an emerging tool to model the phenotypic and cellular heterogeneity as well as microenvironmental aspects of in vivo tumor growth. In this review we discuss the cellular, chemical and physical factors contributing to zonation and cellular crosstalk within tumor masses. On this basis, we further describe 3D cell culture technologies for growth of MCTS as advanced tools for exploring molecular tumor growth determinants and facilitating drug discovery efforts. We conclude with a synopsis on technological aspects for on-line analysis and post-processing of 3D MCTS models., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Introduction: We describe a novel 3D co-culture model using non-small cell lung cancer (NSCLC) cell lines in combination with lung fibroblasts. This model allows the investigation of tumour-stroma interactions and addresses the importance of having a more in vivo like cell culture model., Methods: Automation-compatible multi-well hanging drop microtiter plates were used for the production of 3D mono- and co-cultures. In these hanging drops the two NSCLC cell lines A549 and Colo699 were cultivated either alone or co-cultured with lung fibroblasts. The viability of tumour spheroids was confirmed after five and ten days by using Annexin V/Propidium Iodide staining for flow-cytometry. Tumour fibroblast spheroid formation was characterized by scanning electron microscope (SEM), semi-thin sections, fluorescence microscope and immunohistochemistry (IHC). In addition to conventional histology, protein expression of E-Cadherin, vimentin, Ki67, fibronectin, cytokeratin 7 and α-smooth muscle actin (α-SMA) was investigated by IHC., Results: Lower viability was observed in A549 monocultures compared to co-cultures, whereas Colo699 monocultures showed better viability compared to co-cultures. Ki67 expression varied significantly between mono- and co-cultures in both tumour cell lines. An increase of vimentin and decreased E-Cadherin expression could be detected during the course of the cultivation suggesting a transition to a more mesenchymal phenotype. Furthermore, the fibroblast cell line showed an expression of α-SMA only in co-culture with the cancer cell line A549, thereby indicating a mesenchymal to mesenchymal shift to an even more myofibroblast phenotype., Conclusion: We demonstrate that our method is a promising tool for the generation of tumour spheroid co-cultures. Furthermore, these spheroids allow the investigation of tumour-stroma interactions and a better reflection of in vivo conditions of cancer cells in their microenvironment. Our method holds potential to contribute to the development of anti-cancer agents and support the search for biomarkers.

Integrated approaches using different in vitro methods in combination with bioinformatics can (i) increase the success rate and speed of drug development; (ii) improve the accuracy of toxicological risk assessment; and (iii) increase our understanding of disease. Three-dimensional (3D) cell culture models are important building blocks of this strategy which has emerged during the last years. The majority of these models are organotypic, i.e., they aim to reproduce major functions of an organ or organ system. This implies in many cases that more than one cell type forms the 3D structure, and often matrix elements play an important role. This review summarizes the state of the art concerning commonalities of the different models. For instance, the theory of mass transport/metabolite exchange in 3D systems and the special analytical requirements for test endpoints in organotypic cultures are discussed in detail. In the next part, 3D model systems for selected organs--liver, lung, skin, brain--are presented and characterized in dedicated chapters. Also, 3D approaches to the modeling of tumors are presented and discussed. All chapters give a historical background, illustrate the large variety of approaches, and highlight up- and downsides as well as specific requirements. Moreover, they refer to the application in disease modeling, drug discovery and safety assessment. Finally, consensus recommendations indicate a roadmap for the successful implementation of 3D models in routine screening. It is expected that the use of such models will accelerate progress by reducing error rates and wrong predictions from compound testing.

Cancer cells in vivo are coordinately influenced by an interactive 3D microenvironment. However, identification of drug targets and initial target validations are usually performed in 2D cell culture systems. The opportunity to design 3D co-culture models that reflect, at least in part, these heterotypic interactions, when coupled with RNA interference, would enable investigations on the phenotypic impact of gene function in a model that more closely resembles tumor growth in vivo. Here we describe a high-throughput-compatible method to discover cancer gene functions in a co-culture 3D tumor microtissue model system composed of human DLD1 colon cancer cells together with murine fibroblasts. Strikingly, DLD1 cells in this model failed to expand upon siRNA-mediated depletion of Kif11/Eg5, a member of the mitotic kinesin-like motor protein family. In contrast, these cancer cells proved to be more resistant to Kif11/Eg5 depletion when grown as a 2D monolayer. These results suggest that growth of certain cancer cells in 3D versus 2D can unveil differential dependencies on specific genes for their survival. Moreover, they denote that the high-throughput-compatible, hanging drop technology-based 3D co-culture model will enable the discovery, characterization, and validation of gene functions in key biological and pathological processes.

This review encompasses the most important advances in liver functions and hepatotoxicity and analyzes which mechanisms can be studied in vitro. In a complex architecture of nested, zonated lobules, the liver consists of approximately 80 % hepatocytes and 20 % non-parenchymal cells, the latter being involved in a secondary phase that may dramatically aggravate the initial damage. Hepatotoxicity, as well as hepatic metabolism, is controlled by a set of nuclear receptors (including PXR, CAR, HNF-4α, FXR, LXR, SHP, VDR and PPAR) and signaling pathways. When isolating liver cells, some pathways are activated, e.g., the RAS/MEK/ERK pathway, whereas others are silenced (e.g. HNF-4α), resulting in up- and downregulation of hundreds of genes. An understanding of these changes is crucial for a correct interpretation of in vitro data. The possibilities and limitations of the most useful liver in vitro systems are summarized, including three-dimensional culture techniques, co-cultures with non-parenchymal cells, hepatospheres, precision cut liver slices and the isolated perfused liver. Also discussed is how closely hepatoma, stem cell and iPS cell-derived hepatocyte-like-cells resemble real hepatocytes. Finally, a summary is given of the state of the art of liver in vitro and mathematical modeling systems that are currently used in the pharmaceutical industry with an emphasis on drug metabolism, prediction of clearance, drug interaction, transporter studies and hepatotoxicity. One key message is that despite our enthusiasm for in vitro systems, we must never lose sight of the in vivo situation. Although hepatocytes have been isolated for decades, the hunt for relevant alternative systems has only just begun.

Current 2-dimensional hepatic model systems often fail to predict chemically induced hepatotoxicity due to the loss of a hepatocyte-specific phenotype in culture. For more predictive in vitro models, hepatocytes have to be maintained in a 3-dimensional environment that allows for polarization and cell-cell contacts. Preferably, the model will reflect an in vivo-like multi-cell type environment necessary for liver-like responses. Here, we report the characterization of a multi-cell type microtissue model, generated from primary human hepatocytes and liver-derived non-parenchymal cells. Liver microtissues were stable and functional for 5 weeks in culture enabling, for example, long-term toxicity testing of acetaminophen and diclofenac. In addition, Kupffer cells were responsive to inflammatory stimuli such as LPS demonstrating the possibility to detect inflammation-mediated toxicity as exemplified by the drug trovafloxacin. Herewith, we present a novel 3D liver model for routine testing in 96-well format capable of reducing the risk of unwanted toxic effects in the clinic.

Living autologous tissue engineered vascular-grafts (TEVGs) with growth-capacity may overcome the limitations of contemporary artificial-prostheses. However, the multi-step in vitro production of TEVGs requires extensive ex vivo cell-manipulations with unknown effects on functionality and quality of TEVGs due to an accelerated biological age of the cells. Here, the impact of biological cell-age and tissue-remodeling capacity of TEVGs in relation to their clinical long-term functionality are investigated. TEVGs were implanted as pulmonary-artery (PA) replacements in juvenile sheep and followed for up to 240 weeks (∼4.5years). Telomere length and telomerase activity were compared amongst TEVGs and adjacent native tissue. Telomerase-activity of in vitro expanded autologous vascular-cells prior to seeding was <5% as compared to a leukemic cell line, indicating biological-aging associated with decreasing telomere-length with each cellular-doubling. Up to 100 weeks, the cells in the TEVGs had consistently shorter telomeres compared to the native counterpart, whereas no significant differences were detectable at 240 weeks. Computed tomography (CT) analysis demonstrated physiological wall-pressures, shear-stresses, and flow-pattern comparable to the native PA. There were no signs of degeneration detectable and continuous native-analogous growth was confirmed by vessel-volumetry. TEVGs exhibit a higher biological age compared to their native counterparts. However, despite of this tissue engineering technology related accelerated biological-aging, growth-capacity and long-term functionality was not compromised. To the contrary, extensive in-vivo remodeling processes with substantial endogenous cellular turnover appears to result in "TEVG rejuvenation" and excellent clinical performance. As these large-animal results can be extrapolated to approximately 20 human years, this study suggests long-term clinical-safety of cardiovascular in vitro tissue engineering and may contribute to safety-criteria as to first-in-man clinical-trials., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Current implantation formats to deliver bone marrow-derived mesenchymal stem cells (MSCs) to the site of myocardial injury resulted only in limited cell retention and integration. As an alternative concept to single cell transplantation, we investigated the fate of cell tracker-labeled syngenic rat MSC microtissue implants, injected into the scar area in a chronic rat myocardial infarction model. Analysis of the explants after 2 and 7 days revealed substantial amounts of the cell tracker within the infarct region. However, the signal was associated with the extracellular matrix rather than with viable implanted cells. Following these results, we systematically evaluated the behavior of MSCs derived from mouse, rat, and human origin in the microtissue format in vitro. We found that MSC-composed microtissues of all three species displayed highly elevated levels of apoptotic activity and cell death. This effect could be attenuated by initiating osteogenic differentiation during the tissue formation process. We conclude that MSCs used for tissue regeneration undergo apoptosis in their new environment unless they get appropriate signals for differentiation that permit sustained survival. These findings may explain the limited cellular regeneration potential in current MSC-based clinical trials and may change therapeutic strategies away from pure, unmodulated cell delivery concepts.

Several alternative methods to replace animal experiments have been accepted by legal bodies. An even larger number of tests are under development or already in use for non-regulatory applications or for the generation of information stored in proprietary knowledge bases. The next step for the use of the different in vitro methods is their combination into integrated testing strategies (ITS) to get closer to the overall goal of predictive "in vitro-based risk evaluation processes." We introduce here a conceptual framework as the basis for future ITS and their use for risk evaluation without animal experiments. The framework allows incorporation of both individual tests and already integrated approaches. Illustrative examples for elements to be incorporated are drawn from the session "Innovative technologies" at the 8th World Congress on Alternatives and Animal Use in the Life Sciences, held in Montreal, 2011. For instance, LUHMES cells (conditionally immortalized human neurons) were presented as an example for a 2D cell system. The novel 3D platform developed by InSphero was chosen as an example for the design and use of scaffold-free, organotypic microtissues. The identification of critical pathways of toxicity (PoT) may be facilitated by approaches exemplified by the MatTek 3D model for human epithelial tissues with engineered toxicological reporter functions. The important role of in silico methods and of modeling based on various pre-existing data is demonstrated by Altamira's comprehensive approach to predicting a molecule's potential for skin irritancy. A final example demonstrates how natural variation in human genetics may be overcome using data analytic (pattern recognition) techniques borrowed from computer science and statistics. The overall hazard and risk assessment strategy integrating these different examples has been compiled in a graphical work flow.

Although the relevance of three-dimensional (3-D) culture has been recognized for years and exploited at an academic level, its translation to industrial applications has been slow. The development of reliable high-throughput technologies is clearly a prerequisite for the industrial implementation of 3-D models. In this study the robustness of spherical microtissue production and drug testing in a 96-well hanging-drop multiwell plate format was assessed on a standard 96-well channel robotic platform. Microtissue models derived from six different cell lines were produced and characterized according to their growth profile and morphology displaying high-density tissue-like reformation and growth over at least 15 days. The colon cancer cell line HCT116 was chosen as a model to assess microtissue-based assay reproducibility. Within three individual production batches the size variations of the produced microtissues were below 5%. Reliability of the microtissue-based assay was tested using two reference compounds, staurosporine and chlorambucil. In four independent drug testings the calculated IC(50) values were benchmarked against 2-D multiwell testings displaying similar consistency. The technology presented here for the automated production of a variety of microtissues for efficacy testing in a standard 96-well format will aid the implementation of more organotypic models at an early time point in the drug discovery process., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Current scientific attempts to generate in vitro tissue-engineered living blood vessels (TEBVs) show substantial limitations, thereby preventing routine clinical use. In the present report, we describe a novel biotechnology concept to create living small diameter TEBV based exclusively on microtissue self-assembly (living cellular re-aggregates). A novel bioreactor was designed to assemble microtissues in a vascular shape and apply pulsatile flow and circumferential mechanical stimulation. Microtissues composed of human artery-derived fibroblasts (HAFs) and endothelial cells (HUVECs) were accumulated and cultured for 7 and 14 days under pulsatile flow/mechanical stimulation or static culture conditions with a diameter of 3mm and a wall thickness of 1mm. The resulting vessels were analyzed by immunohistochemistry for extracellular matrix (ECM) and cell phenotype (von Willebrand factor, alpha-SMA, Ki67, VEGF). Self-assembled microtissues composed of fibroblasts displayed significantly accelerated ECM formation compared to monolayer cell sheets. Accumulation of vessel-like tissue occurred within 14 days under both, static and flow/mechanical stimulation conditions. A layered tissue formation was observed only in the dynamic group, as indicated by luminal aligned alpha-SMA positive fibroblasts. We could demonstrate that self-assembled cell-based microtissues can be used to generate small diameter TEBV. The significant enhancement of ECM expression and maturation, together with the pre-vascularization capacity makes this approach highly attractive in terms of generating functional small diameter TEBV devoid of any foreign material., (Copyright (c) 2010 Elsevier B.V. All rights reserved.)

The development of cell-based therapies for diseased tissues is one of the most promising research directions in regenerative medicine. Cell-delivery methods are an essential part of cell therapy concepts. Therapies with the potential to become clinical routine will only be possible if these methods ensure efficient engraftment and therapeutically-relevant number of cells survive. Here we provide an overview of three different scaffold-free cell-delivery concepts: (i) single cell delivery, (ii) cell sheet engineering and (iii) microtissue technology., (2010 Elsevier B.V. All rights reserved.)

Because cardiomyocytes lose their ability to divide after birth, any subsequent cell loss or dysfunction results in pathologic cardiac rhythm initiation or impulse conduction. Strategies to restore and control the electrophysiological activity of the heart may, therefore, greatly affect the regeneration of cardiac tissue functionality. Using lentivirus-derived particles to regulate the bone morphogenetic protein-2 (BMP-2) gene expression in a pristinamycin- or gaseous acetaldehyde-inducible manner, we demonstrated the adjustment of cardiomyocyte electrophysiological characteristics. Complementary metal oxide semiconductor-based high-density microelectrode arrays (HD-MEAs) were used to monitor the electrophysiological activity of neonatal rat cardiomyocytes (NRCs) cultured as monolayers (NRCml) or as microtissues (NRCmt). NRCmt more closely resembled heart tissue physiology than did NRCml and could be conveniently monitored using HD-MEAs because of their ability to detect low-signal events and to sub-select the region of interest, namely, areas where the microtissues were placed. Cardiomyocyte-forming microtissues, transduced using lentiviral vectors encoding BMP-2, were capable of restoring myocardial microtissue electrical activity. We also engineered NRCmt to functionally couple within a cardiomyocyte monolayer, thus showing pacemaker-like activity upon local regulation of transgenic BMP-2 expression. The controlled expression of therapeutic transgenes represents a crucial advance for clinical interventions and gene-function analysis.

Differentiation and transdifferentiation strategies have a large role in the manipulation of cells in replacing dysfunctional cells and tissues. We developed adipose-like microtissues using gravity-enforced self-assembly of monodispersed human primary preadipocytes to determine their transdifferentiation capacity to form bone-like tissues. Using lentivirus-derived particles to induce ectopic bone morphogenetic protein (BMP)-2 and delta FBJ murine osteosarcoma viral oncogene homolog B (DeltaFosB) gene expression, we demonstrated a time-dependent induction of osteoblast-specific genes and properties such as calcium deposits, bone-like extracellular matrix (ECM), and matrix mineralization. DeltaFosB was able to trigger partial Pref-1-mediated de-differentiation of adipocytes, which also retained their adipocytic cell phenotype. Osteoblast-specific structures could be co-localized in the ECM of lipid-containing cells analyzed using immunofluorescence and transmission electron microscopy when BMP-2 and DeltaFosB were co-expressed, suggesting that differentiated adipocytes are able to transdifferentiate into osteoblasts via a transient hybrid adipocyte-preadipocyte-osteoblast cell phenotype. Microtissues transgenic for BMP-2 and DeltaFosB expression were able to reproduce bone matrix, which occurs to a lesser extent in conventional two-dimensional (2D) cultures but is known to play a decisive role in the development and function of bone in vivo. This demonstrates that ECM-inclusive studies are essential for future characterization assays. Therefore, 3D cultures provide a superior ex vivo system for the improved characterization of phenotypical and functional alterations resulting from interventions directed toward differentiation processes. Precise control of transdifferentiation of adipocytes into osteoblasts in a 3D culture mimicking in vivo tissue conditions as closely as possible will foster important advances in regenerative medicine and tissue engineering.

Mammalian reporter proteins are essential for gene-function analysis, drugscreening initiatives and as model product proteins for biopharmaceutical manufacturing. Bacillus subtilis can maintain its metabolism by secreting Xylanase A (XynA), which converts xylan into shorter xylose oligosaccharides. XynA is a family 11 xylanase monospecific for D-xylose containing substrates. Mammalian cells transgenic for constitutive expression of wild-type xynA showed substantial secretion of this prokaryotic enzyme. Deletion analysis confirmed that a prokaryotic signal sequence encoded within the first 81 nucleotides was compatible with the secretory pathway of mammalian cells. Codon optimization combined with elimination of the prokaryotic signal sequence resulted in an exclusively intracellular mammalian Xylanase A variant (InXy) while replacement by an immunoglobulin-derived secretion signal created an optimal secreted Xylanase A derivative (SeXy). A variety of chromogenic and fluorescence-based assays adapted for use with mammalian cells detected InXy and SeXy with high sensitivity and showed that both reporter proteins resisted repeated freeze/thaw cycles, remained active over wide temperature and pH ranges, were extremely stable in human serum stored at room temperature and could independently be quantified in samples also containing other prominent reporter proteins such as the human placental alkaline phosphatase (SEAP) and the Bacillus stearothermophilus-derived secreted alpha-amylase (SAMY). Glycoprofiling revealed that SeXy produced in mammalian cells was N- glycosylated at four different sites, mutation of which resulted in impaired secretion. SeXy was successfully expressed in a variety of mammalian cell lines and primary cells following transient transfection and transduction with adeno-associated virus particles (AAV) engineered for constitutive SeXy expression. Intramuscular injection of transgenic AAVs into mice showed significant SeXy levels in the bloodstream. InXy and SeXy are highly sensitive, compact and robust reporter proteins, fully compatible with pre-existing marker genes and can be assayed in high-throughput formats using very small sample volumes., (Copyright 2007 Wiley Periodicals, Inc.)

Receptor-activity-modifying protein (RAMP) 1 is an accessory protein of the G protein-coupled calcitonin receptor-like receptor (CLR). The CLR/RAMP1 heterodimer defines a receptor for the potent vasodilatory calcitonin gene-related peptide. A wider tissue distribution of RAMP1, as compared to that of the CLR, is consistent with additional biological functions. Here, glutathione S-transferase (GST) pull-down, coimmunoprecipitation and yeast two-hybrid experiments identified beta-tubulin as a novel RAMP1-interacting protein. GST pull-down experiments indicated interactions between the N- and C-terminal domains of RAMP1 and beta-tubulin. Yeast two-hybrid experiments confirmed the interaction between the N-terminal region of RAMP1 and beta-tubulin. Interestingly, alpha-tubulin was co-extracted with beta-tubulin in pull-down experiments and immunoprecipitation of RAMP1 coprecipitated alpha- and beta-tubulin. Confocal microscopy indicated colocalization of RAMP1 and tubulin predominantly in axon-like processes of neuronal differentiated human SH-SY5Y neuroblastoma cells. In conclusion, the findings point to biological roles of RAMP1 beyond its established interaction with G protein-coupled receptors.

Vascularization is one of the most central processes enabling multicellular life. Owing to the complexity of vascularization regulatory networks, minor control imbalances often have severe pathologic consequences ranging from ischemic diseases to cancer. Tissue engineers are immediately confronted with vascularization as artificial tissues of a clinically relevant size require a vascular system to ensure vital physiologic logistics throughout the entire tissue and to enable rapid connection to the host vasculature following implantation. Using human umbilical vein endothelial cells (HUVECs) coated onto a human aortic fibroblast (HAF) core microtissue generated by gravity-enforced self-assembly in hanging drops, we created a tissue-culture system for studying capillary network formation. We provide comprehensive technical insight into the design and analysis of prototype vascularization in multicell-type-based microtissues. Detailed understanding of generic processes managing capillary formation in human tissue culture may foster advances in the development of clinical tissue implants.

Heart valve replacement represents the most common surgical therapy for end-stage valvular heart diseases. A major drawback all contemporary heart valve replacements have in common is the lack of growth, repair, and remodeling capabilities. To overcome these limitations, the emerging field of tissue engineering is focusing on the in vitro generation of functional, living heart valve replacements. The basic approach uses starter matrices of either decellularized xenogeneic or biopolymeric materials configured in the shape of the heart valve and subsequent cell seeding. Moreover, in vitro strategies using mechanical loading in bioreactor systems have been developed to improve tissue maturation. This chapter gives a short overview of the current concepts and provides detailed methods for in vitro heart valve tissue engineering.

Cell-based therapies and tissue engineering initiatives are gathering clinical momentum for next-generation treatment of tissue deficiencies. By using gravity-enforced self-assembly of monodispersed primary cells, we have produced adult and neonatal rat cardiomyocyte-based myocardial microtissues that could optionally be vascularized following coating with human umbilical vein endothelial cells (HUVECs). Within myocardial microtissues, individual cardiomyocytes showed native-like cell shape and structure, and established electrochemical coupling via intercalated disks. This resulted in the coordinated beating of microtissues, which was recorded by means of a multi-electrode complementary metal-oxide-semiconductor microchip. Myocardial microtissues (microm3 scale), coated with HUVECs and cast in a custom-shaped agarose mold, assembled to coherent macrotissues (mm3 scale), characterized by an extensive capillary network with typical vessel ultrastructures. Following implantation into chicken embryos, myocardial microtissues recruited the embryo's capillaries to functionally vascularize the rat-derived tissue implant. Similarly, transplantation of rat myocardial microtissues into the pericardium of adult rats resulted in time-dependent integration of myocardial microtissues and co-alignment of implanted and host cardiomyocytes within 7 days. Myocardial microtissues and custom-shaped macrotissues produced by cellular self-assembly exemplify the potential of artificial tissue implants for regenerative medicine.

Tissue engineering strategies are gathering clinical momentum in regenerative medicine and are expected to provide excellent opportunities for therapy for difficult-to-treat human pathologies. Being aware of the requirement to produce larger artificial tissue implants for clinical applications, we used microtissues, produced using gravity-enforced self-assembly of monodispersed primary cells, as minimal tissue units to generate scaffold-free vascularized artificial macrotissues in custom-shaped agarose molds. Mouse myoblast, pig and human articular-derived chondrocytes, and human myofibroblast (HMF)-composed microtissues (microm3 scale) were amalgamated to form coherent macrotissue patches (mm3 scale) of a desired shape. Macrotissues, assembled from the human umbilical vein endothelial cell (HUVEC)-coated HMF microtissues, developed a vascular system, which functionally connected to the chicken embryo's vasculature after implantation. The design of scaffold-free vascularized macrotissues is a first step toward the scale-up and production of artificial tissue implants for future tissue engineering initiatives.

The straightforward production and dose-controlled administration of protein therapeutics remain major challenges for the biopharmaceutical manufacturing and gene therapy communities. Transgenes linked to HIV-1-derived vpr and pol-based protease cleavage (PC) sequences were co-produced as chimeric fusion proteins in a lentivirus production setting, encapsidated and processed to fusion peptide-free native protein in pseudotyped lentivirions for intracellular delivery and therapeutic action in target cells. Devoid of viral genome sequences, protein-transducing nanoparticles (PTNs) enabled transient and dose-dependent delivery of therapeutic proteins at functional quantities into a variety of mammalian cells in the absence of host chromosome modifications. PTNs delivering Manihot esculenta linamarase into rodent or human, tumor cell lines and spheroids mediated hydrolysis of the innocuous natural prodrug linamarin to cyanide and resulted in efficient cell killing. Following linamarin injection into nude mice, linamarase-transducing nanoparticles impacted solid tumor development through the bystander effect of cyanide.

A precise understanding of processes managing heterologous protein production in vitro and in vivo is essential for the manufacture of sophisticated biopharmaceuticals as well as for future gene therapy and tissue engineering initiatives. Capitalizing on the gravity-enforced self-assembly of monodispersed cells into coherent (multicellular) microtissues we studied heterologous protein production of microtissues and monolayers derived from cell lines and primary cells engineered/transduced for (i) constitutive, (ii) proliferation-controlled, (iii) macrolide-, or (iv) gas-inducible expression of the human placental secreted alkaline phosphatase (SEAP) and of the Bacillus stearothermophilus-derived secreted alpha-amylase (SAMY). Specific productivity of cells assembled in microtissues was up to 20-fold higher than isogenic monolayer cultures. Diffusion across microtissues could be further increased by HUVEC-mediated vascularization. As well as higher specific protein productivities, microtissues were also more efficient than monolayer cultures in assembling transgenic lentiviral particles. Our results showed that mammalian cells embedded in a tissue-like three-dimensional (3D) microenvironment exhibit increased production capacity. This observation should be considered for gene therapy and tissue engineering scenarios as well as for biopharmaceutical manufacturing.

Unraveling intra- and inter-cellular signaling networks managing cell-fate control, coordinating complex differentiation regulatory circuits and shaping tissues and organs in living systems remain major challenges in the post-genomic era. Resting on the laurels of past-century monolayer culture technologies, the cell culture community has only recently begun to appreciate the potential of three-dimensional mammalian cell culture systems to reveal the full scope of mechanisms orchestrating the tissue-like cell quorum in space and time. Capitalizing on gravity-enforced self-assembly of monodispersed primary embryonic mouse cells in hanging drops, we designed and characterized a three-dimensional cell culture model for ganglion-like structures. Within 24h, a mixture of mouse embryonic fibroblasts (MEF) and cells, derived from the dorsal root ganglion (DRG) (sensory neurons and Schwann cells) grown in hanging drops, assembled to coherent spherical microtissues characterized by a MEF feeder core and a peripheral layer of DRG-derived cells. In a time-dependent manner, sensory neurons formed a polar ganglion-like cap structure, which coordinated guided axonal outgrowth and innervation of the distal pole of the MEF feeder spheroid. Schwann cells, present in embryonic DRG isolates, tended to align along axonal structures and myelinate them in an in vivo-like manner. Whenever cultivation exceeded 10 days, DRG:MEF-based microtissues disintegrated due to an as yet unknown mechanism. Using a transgenic MEF feeder spheroid, engineered for gaseous acetaldehyde-inducible interferon-beta (ifn-beta) production by cotransduction of retro-/ lenti-viral particles, a short 6-h ifn-beta induction was sufficient to rescue the integrity of DRG:MEF spheroids and enable long-term cultivation of these microtissues. In hanging drops, such microtissues fused to higher-order macrotissue-like structures, which may pave the way for sophisticated bottom-up tissue engineering strategies. DRG:MEF-based artificial micro- and macrotissue design demonstrated accurate key morphological aspects of ganglions and exemplified the potential of self-assembled scaffold-free multicellular micro-/macrotissues to provide new insight into organogenesis.

Owing to its dual impact on tissue engineering (neovascularization of tissue implants) and cancer treatment (prevention of tumor-induced vascularization), management and elucidation of vascularization phenomena remain clinical priorities. Using a variety of primary human cells and (neoplastic) cell lines assembled in microtissues by gravity-enforced self-aggregation in hanging drops we (i) studied size and age-dependent VEGF production of microtissues in comparison to isogenic monolayer cultures, (ii) characterized the self-organization and VEGF-production potential of mixed-cell spheroids, (iii) analyzed VEGF-dependent capillary formation of human umbilical vein endothelial cells (HUVECs) cells coated onto several human primary cell spheroids, and (iv) profiled endostatin action on vascularization in human microtissues. Precise understanding of vascularization in human microtissues may foster advances in clinical tissue implant engineering, tumor treatment, as well as drug discovery and drug-function analysis.