Search

The generation of brine solutions from dense membrane (reverse osmosis, RO or nanofiltration, NF) water reclamation systems has been increasing worldwide, and the lack of cost effective disposal options is becoming a critical water resources management issue. In Singapore, NEWater is the product of a multiple barrier water reclamation process from secondary treated domestic effluent using MF/UF-RO and UV technologies. The RO brine (concentrates) accounts for more than 20% of the total flow treated. To increase the water recovery and treat the RO brine, a CDI based process with BAC as pretreatment was tested. The results show that ion concentrations in CDI product were low except SiO2 when compared with RO feed water. CDI product was passed through a RO and the RO permeate was of better quality including low SiO2 as compared to NEWater quality. It could be beneficial to use a dedicated RO operated at optimum conditions with better performance to recover the water. BAC was able to achieve 15-27% TOC removal of RO brine. CDI had been tested at a water recovery ranging from 71.6 to 92.3%. CDI based RO brine treatment could improve overall water recovery of NEWater production over 90%. It was found that calcium phosphate scaling and organic fouling was the major cause of CDI pressure increase. Ozone disinfection and sodium bisulfite dosing were able to reduce CDI fouling rate. For sustainable operation of CDI organic fouling control and effective organic fouling cleaning should be further studied.

Reverse osmosis (RO) reject recovery from the water reclamation process was demonstrated feasible using an integrated pretreatment scheme followed by the Capacitive Deionization (CDI) process. The RO reject had an average total dissolved solids (TDS) of 1276+/-166 mg/L. Water recovery of 85% with water quality comparable with the RO feed was achieved. Pretreatments using biological activated carbon (BAC) and BAC-ultrafiltration (UF) attained total organic carbon (TOC) removal efficiencies of 23.5+/-6.0% and 39.9+/-9.0%, respectively. Organics removal of RO reject was attributed to simultaneous adsorption and biodegradation in the BAC pretreatment, while further biodegradation in the submerged UF membrane tank provided additional organics removal. Membrane and CDI fouling was reduced by pH adjustment of the pretreated RO reject to approximately 6.5, which prolonged the CDI operation time by at least two times. The CDI process was able to achieve more than 88 and 87% TDS and ion removals, respectively, while PO(4)(3-) and TOC removals were at 52-81% and 50-63%, respectively.

Ozonation was used in this study to improve biodegradability of RO brine from water reclamation facilities. An ozone dosage ranging from 3 to 10 mg O(3)/L and contact times of 10 and 20 min in batch studies were found to increase the biodegradability (BOD(5)/TOC ratio) of the RO brine by 1.8-3.5 times. At the same time, total organic carbon (TOC) removal was in the range of 5.3-24.5%. The lab-scale ozone-biological activated carbon (BAC) at an ozone dosage of 6.0mg O(3)/L with 20-min contact time was able to achieve 3 times higher TOC removal compared to using BAC alone. Further processing with Capacitive Deionization (CDI) process was able to generate a product water with better water quality than the RO feed water, i.e., with more than 80% ions removal and a lower TOC concentration. The ozone-BAC pretreatment has the potential of reducing fouling in the CDI process.