450 results on '"Kawada, Hiroyuki"'
Search Results
2. Evaluation of matrix crack growth in interlaminar toughened quasi-isotropic carbon-fiber reinforced plastic laminates up to the very-high cycle regime by ultrasonic fatigue testing
3. Catalytic combustion type optical fiber Bragg grating hydrogen gas sensor using platinum-loaded fumed silica powder
4. Experimental evaluation of mode I fracture toughness of dissimilar-material joints with thermal residual stresses
5. Recovery of carbon fiber from prepreg using nitric acid and evaluation of recycled CFRP
6. Influence of covalently-bound graphene oxide on the mechanical properties of carbon fiber composite materials
7. Stress and energy release rate analysis of cross-ply carbon fiber-reinforced plastic laminate with transverse cracks subjected to ultrasonic vibration using a variational approach
8. Very High-Cycle Fatigue Characteristics of Cross-Ply CFRP Laminates in Transverse Crack Initiation
9. Damage Mechanisms and Mechanical Properties of Directly Bonded CFRTP and Aluminium with Nano-Structured Surface
10. Effect of the interfacial nanostructure on the interlaminar fracture toughness and damage mechanisms of directly bonded carbon fiber reinforced thermoplastics and aluminum
11. Experimental measurement of mode-I fracture toughness of dissimilar material joints with thermal residual stresses
12. Evaluation of strength degradation behavior and fatigue life prediction of plain-woven carbon-fiber-reinforced plastic laminates immersed in seawater
13. Direct exfoliation of layered materials in low-boiling point solvents using weak acid salts
14. Very High-Cycle Fatigue Characteristics of Cross-Ply CFRP Laminates in Transverse Crack Initiation
15. Damage Mechanisms and Mechanical Properties of Directly Bonded CFRTP and Aluminium with Nano-Structured Surface
16. Influence of pulse current density on suppression of persistent slip band growth
17. Electropulsing suppresses extrusion growth in polycrystalline copper subjected to fatigue loading
18. Very high-cycle fatigue properties of 90° unidirectional CFRP laminates and evaluation of fatigue limits by free volume measurement using positron microscopy
19. Catalytic combustion type optical fiber Bragg grating hydrogen gas sensor using platinum-loaded fumed silica powder
20. Application of Ultrasonic Fatigue Test for Evaluation of Very High Cycle Fatigue Damage Growth in L-Shaped Quasi-Isotropic CFRP Laminates
21. Evaluation of mechanical properties of untwisted carbon nanotube yarn for application to composite materials
22. Evaluation of very high cycle fatigue properties for transverse crack initiation in cross‐ply carbon fiber‐reinforced plastic laminates
23. Quantitative evaluation of fatigue damage growth in CFRP laminates that changes due to applied stress level
24. Effect of ply angle misalignment on out-of-plane deformation of symmetrical cross-ply CFRP laminates: Accuracy of the ply angle alignment
25. High-cycle fatigue characteristics of quasi-isotropic CFRP laminates over 10 8 cycles (Initiation and propagation of delamination considering interaction with transverse cracks)
26. Post-synthesis treatment improves the electrical properties of dry-spun carbon nanotube yarns
27. Influence of covalently-bound graphene oxide on the mechanical properties of carbon fiber composite materials
28. Time-dependent out-of-plane deformation of UD-CFRP in humid environment
29. Transverse crack growth behavior considering free-edge effect in quasi-isotropic CFRP laminates under high-cycle fatigue loading
30. Dynamic tensile properties of carbon fiber composite based on thermoplastic epoxy resin loaded in matrix-dominant directions
31. Lifetime prediction of woven GFRP laminates under constant tensile loading in hydrothermal environment
32. Effect of interfacial nanostructure on mode mixity in directly bonded carbon fiber reinforced thermoplastic laminates and aluminum alloy considering thermal residual stress
33. Strain-rate dependence of the tensile strength of glass fibers
34. Simple method for obtaining viscoelastic parameters of polymeric materials by incorporating physical-aging effects
35. Swelling and viscoelastic properties of poly(vinyl alcohol) physical gels synthesized using sodium silicate
36. Stress analysis of laminates of carbon fiber reinforced plastics, containing transverse cracks, considering free-edge effect and residual thermal stress
37. A Numerical Simulation of Time-Dependent Interface Failure Under Shear and Compressive Loads in Single-Fiber Composites
38. Analysis of time-dependent deformation of a CFRP mirror under hot and humid conditions
39. Fatigue delamination growth characterization of a directly bonded carbon-fiber-reinforced thermoplastic laminates and aluminum alloys with surface nanostructure using DCB test
40. Long-Term Creep Rupture Prediction in Unidirectional Composites
41. An Elasto-Plastic Shear-Lag Model for Single Fiber Composite
42. Stress analysis of cracked cross-ply CFRP laminates subjected to ultrasonic vibrations by variational approach
43. FEM modeling of to simulate drop-weight fracture of CFRTP with elastomer dispersion layer
44. Effect of interfacial nanostructure on mode mixity in directly bonded carbon fiber reinforced thermoplastic laminates and aluminum alloy considering thermal residual stress
45. Effects of molecular weight of raw material and heat-treatment temperature on mechanical properties of dry-spun SiC fibers
46. Fatigue characteristics of quasi-isotropic CFRP laminates subjected to variable amplitude cyclic two-stage loading
47. Usefulness of an echo-contrast agent for assessment of coronary flow velocity and coronary flow velocity reserve in the left anterior descending coronary artery with transthoracic Doppler scan echocardiography
48. Effect of Interfacial Nanostructure on Mode Mixity in Directly Bonded Carbon Fiber Reinforced Thermoplastic Laminates and Aluminum Alloy With Thermal Stresses
49. Energy Absorption Mechanism of Thermoplastic Fiber-Reinforced Plastics under Impact Loading Using Split-Hopkinson Pressure-Bar Method
50. Effect of Nanostructured Surface on Strength and Fracture Morphology in Dissimilar Bonding of Aluminum Alloy and Carbon Fiber Reinforced Thermoplastics Laminate
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.