Search

Main conclusion: Cellulosic secondary walls evolved convergently in coralline red macroalgae, reinforcing tissues against wave-induced breakage, despite differences in cellulose abundance, microfibril orientation, and wall structure. Abstract: Cellulose-enriched secondary cell walls are the hallmark of woody vascular plants, which develop thickened walls to support upright growth and resist toppling in terrestrial environments. Here we investigate the striking presence and convergent evolution of cellulosic secondary walls in coralline red algae, which reinforce thalli against forces applied by crashing waves. Despite ostensible similarities to secondary wall synthesis in land plants, we note several structural and mechanical differences. In coralline red algae, secondary walls contain three-times more cellulose (~ 22% w/w) than primary walls (~ 8% w/w), and their presence nearly doubles the total thickness of cell walls (~ 1.2 µm thick). Field emission scanning electron microscopy revealed that cellulose bundles are cylindrical and lack any predominant orientation in both primary and secondary walls. His-tagged recombinant carbohydrate-binding module differentiated crystalline and amorphous cellulose in planta, noting elevated levels of crystalline cellulose in secondary walls. With the addition of secondary cell walls, Calliarthron genicular tissues become significantly stronger and tougher, yet remain remarkably extensible, more than doubling in length before breaking under tension. Thus, the development of secondary walls contributes to the strong-yet-flexible genicular tissues that enable coralline red algae to survive along wave-battered coastlines throughout the NE Pacific. This study provides an important evolutionary perspective on the development and biomechanical significance of secondary cell walls in a non-model, non-vascular plant. Fil: Martone, Patrick T.. University of British Columbia; Canadá Fil: Janot, Kyra. University of British Columbia; Canadá Fil: Fujita, Miki. University of British Columbia; Canadá Fil: Wasteneys, Geoffrey. University of British Columbia; Canadá Fil: Ruel, Katia. E.I. Link-Conseil; Francia Fil: Joseleau, Jean-Paul. E.I. Link-Conseil; Francia Fil: Estevez, Jose Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Instituto de Investigaciones Bioquímicas de Buenos Aires. Fundación Instituto Leloir. Instituto de Investigaciones Bioquímicas de Buenos Aires; Argentina. Universidad Andrés Bello; Chile

The preservative efficacy of organic biocidal products is strongly related to their capacity of penetration and retention within wood tissues. The specific detection of the pyrethroid insecticide cypermethrin is currently obtained after extraction followed by chemical analysis by chromatography techniques. However, visualizing the insecticide molecule within the wood structure requires specific probes together with microscopy techniques. Therefore, the aim of the present work was to prepare a polyclonal antibody directed against cypermethrin and to implement it on Pinus sylvestris wood samples treated with technical cypermethrin. The antibody was tested on cypermethrin-impregnated wood, and the specific recognition of the insecticide was visualized by transmission electron microscopy (TEM). The immunogold-TEM assay evidenced the capacity of the synthetic biocide active substance to penetrate in the wood. The depth of penetration was measured on sections taken at increasing distances from the coated surface of the wood. Under the present conditions of application, cypermethrin was shown to penetrate up to the 6- to 9-mm zone below the surface. Such results correlated with chemical analyses carried out by GC-ECD after extraction. In addition, the immuno-TEM investigation allowed visualizing, for the first time at the ultrastructure scale of resolution, that cypermethrin was able to diffuse within the secondary wood cell walls. The scarce labeling of the compound middle lamella shows that the chemical does not diffuse freely in this part of the cell walls. The results suggest that the adsorption within the cell walls is an essential factor for the retention of cypermethrin and for its permanence in treated wood products.

In the cell walls of higher plants, cellulose chains are present in crystalline microfibril, with an amorphous part at the surface, or present as amorphous material. To assess the distribution and relative occurrence of the two forms of cellulose in the inflorescence stem of Arabidopsis, we used two carbohydrate-binding modules, CBM3a and CBM28, specific for crystalline and amorphous cellulose, respectively, with immunogold detection in TEM. The binding of the two CBMs displayed specific patterns suggesting that the synthesis of cellulose leads to variable nanodomains of cellulose structures according to cell type. In developing cell walls, only CBM3a bound significantly to the incipient primary walls, indicating that at the onset of its deposition cellulose is in a crystalline structure. As the secondary wall develops, the labeling with both CBMs becomes more intense. The variation of the labeling pattern by CBM3a between transverse and longitudinal sections appeared related to microfibril orientation and differed between fibers and vessels. Although the two CBMs do not allow the description of the complete status of cellulose microstructures, they revealed the dynamics of the deposition of crystalline and amorphous forms of cellulose during wall formation and between cell types adapting cellulose microstructures to the cell function.

Due to the high potential of cellulose nanoparticles in composite materials and for both fundamental and technological considerations, we investigated the interaction between microfibrillar cellulose and fibers. The contribution to the paper properties of fines added to a pulp suspension was determined. The impact of various proportions of fines added to a softwood kraft pulp on the paper strength and how they affected porosity and density was evaluated. The respective effects of dried fines (dead fines), originating from paper or board degradation, and the newly formed secondary fines (fresh fines) generated during refining were examined. The nature of the bonding between the fines and the fibers versus physical retention was characterized in the pulp suspension. For the first time the respective parts in the interaction of hydrogen bonds and mechanical associations were demonstrated and quantified. The amount of H-bonded fresh fines exceeded that of dead fines by more than 30 %. The results revealed that, for both types, the amount of H-bonded fines reached a threshold, independently of the proportion of fines added to the fibers. Addition of fines significantly affected the porosity of papers, fresh fines decreasing porosity more readily than dead fines. All the results are convergent to indicate that fresh fines penetrate more evenly and more deeply into the fiber network and induce better bonding that produces a closure of the fiber mat structure. They also demonstrate that incorporating an optimal proportion of fresh cellulose fines in fiber networks can bring significant improvement to the final composite material.

Tobacco plants expressing an antisense construct for a cationic peroxidase, which down-regulated lignin content at the presumed level of polymerisation, have been further analysed. T(1) plants were derived from a large-scale screen of T(0) mutant lines, previously published, which identified lines demonstrating consistent lignin down-regulation. Of these, line 1074 which had the most robust changes in lignin distribution through several generations was shown to have accompanying down-regulation of transcription of most lignin biosynthesis genes, except cinnamoyl-CoA reductase. The consistent 20% reduction in lignin was not accompanied by significant gross changes in vascular polysaccharide content and composition, despite a modest up-regulation of transcripts of genes involved in cellulose and hemicellulose synthesis. Morphologically, 1074 plants have under-developed xylem with both fibers and vessels having thin cell walls and limited secondary wall thickening with an abnormal S2 layer. However, they were not compromised in overall growth. Nevertheless, these and other lines showed improved potential industrial utility through a threefold increase in enzymic saccharification efficiency compared with wild-type (wt). Therefore, they were profiled for further un-intended effects of transgenesis that might compromise their value for industrial or biofuel processes. Other phenotypic changes included increased leaf thickness and bifurcation at the tip of the leaf. wt-Plants had smaller chloroplasts and higher stomatal numbers than mutants. Transgenic lines also showed a variable leaf pigment distribution with light-green areas that contained measurably less chlorophyll a, b, and carotenoids. Changes in epidermal pavement cells of mutant lines were also observed after exposure to various chemicals, while wt leaves retained their structural integrity. Despite these changes, the mutant plants grew and were viable indicating that lignification patterns can be manipulated considerably through targeting polymerisation without serious deleterious effects.

The involvement of the maize ZmMYB42 R2R3-MYB factor in the phenylpropanoid pathway and cell wall structure and composition was investigated by overexpression in Arabidopsis thaliana. ZmMYB42 down-regulates several genes of the lignin pathway and this effect reduces the lignin content in all lignified tissues. In addition, ZmMYB42 plants generate a lignin polymer with a decreased S to G ratio through the enrichment in H and G subunits and depletion in S subunits. This transcription factor also regulates other genes involved in the synthesis of sinapate esters and flavonoids. Furthermore, ZmMYB42 affects the cell wall structure and degradability, and its polysaccharide composition. Together, these results suggest that ZmMYB42 may be part of the regulatory network controlling the phenylpropanoid biosynthetic pathway., This work received financial support from the CONSOLIDER-INGENIO programme (CSD2007-00036) from the Spanish Ministerio de Ciencia e Innovación. F.M. Sonbol was financed by the European Project INCO-II (ICA4-CT-2000-30017), by the CRAG laboratory, and by the “Instituto de Cooperación con el Mundo Árabe, Agencia Española de Cooperación Internacional”. S. Fornale was financed by a post-doctoral grant from the “Generalitat de Catalunya” (2003PIV-A-00033) and by an I3P contract from the “Consejo Superior de Investigaciones Científicas”. D. Caparrós-Ruiz was financed by the Spanish “Ministerio de Educación y Ciencia” (“Ramón y Cajal” Program). This work was carried out within the framework of the “Xarxa de Referència de Biotecnologia” (XarBa) from the Autonomous Government of Catalonia.

† Background and Aims Plants growing in altered gravity conditions encounter changes in vascular development and cell wall deposition. The aim of this study was to investigate xylem anatomy and arrangement of cellulose microfibrils in vessel walls of different organs of soybean seedlings grown in Space. † Methods Seeds germinated and seedlings grew for 5 d in Space during the Foton-M2 mission. The environmental conditions, other than gravity, of the ground control repeated those experienced in orbit. The seedlings developed in space were compared with those of the control test on the basis of numerous anatomical and ultrastructural parameters such as number of veins, size and shape of vessel lumens, thickness of cell walls and deposition of cellulose microfibrils. † Key Results Observations made with light, fluorescence and transmission electron microscopy, together with the quantification of the structural features through digital image analysis, showed that the alterations due to microgravity do not occur at the same level in the various organs of soybean seedlings. The modifications induced by microgravity or by the indirect effect of space-flight conditions, became conspicuous only in developing vessels at the ultrastructural level. The results suggested that the orientation of microfibrils and their assembly in developing vessels are perturbed by microgravity at the beginning of wall deposition, while they are still able to orient and arrange in thicker and ordered structures at later stages of secondary wall deposition. † Conclusions The process of proper cell-wall building, although not prevented, is perturbed in Space at the early stage of development. This would explain the almost unaltered anatomy of mature structures, accompanied by a slower growth observed in seedlings grown in Space than on Earth.

Extractability and recovery of cellulose from cell walls influences many industrial processes and also the utilisation of biomass for energy purposes. The utility of genetic manipulation of lignin has proven potential for optimising such processes and is also advantageous for the environment. Hemicelluloses, particularly secondary wall xylans, also influence the extractability of cellulose. UDP-glucuronate decarboxylase produces UDP-xylose, the precursor for xylans and the effect of its down-regulation on cell wall structure and cellulose extractability in transgenic tobacco has been investigated. Since there are a number of potential UDP-glucuronate decarboxylase genes, a 490 bp sequence of high similarity between members of the family, was chosen for general alteration of the expression of the gene family. Sense and antisense transgenic lines were analysed for enzyme activity using a modified and optimised electrophoretic assay, for enzyme levels by western blotting and for secondary cell wall composition. Some of the down-regulated antisense plants showed high glucose to xylose ratios in xylem walls due to less xylose-containing polymers, while arabinose and uronic acid contents, which could also have been affected by any change in UDP-xylose provision, were unchanged. The overall morphology and stem lignin content of the modified lines remained little changed compared with wild-type. However, there were some changes in vascular organisation and reduction of xylans in the secondary walls was confirmed by immunocytochemistry. Pulping analysis showed a decreased pulp yield and a higher Kappa number in some lines compared with controls, indicating that they were less delignified, although the level of residual alkali was reduced. Such traits probably indicate that lignin was less available for removal in a reduced background of xylans. However, the viscosity was higher in most antisense lines, meaning that the cellulose was less broken-down during the pulping process. This is one of the first studies of a directed manipulation of hemicellulose content on cellulose extractability and shows both positive and negative outcomes.

In this chapter we concentrate on the structure of reaction wood and its functional properties. The fact that a lot more detailed information exists on tension wood rather than on compression wood, this is reflected in the amount of information in this chapter. During reaction wood formation major changes take place in the cell wall polymers and their distribution. For example, in a typical broadleaf tree G-layer almost pure cellulose is produced as a thick layer, while lignin is mainly present in the middle lamellae and primary cell walls. As reaction wood is formed in trees due to a new demand for strength, we have put some emphasis on the relations between structure and the imbued function of the newly formed polymeric structures. While our understanding of the signalling of reaction wood formation is still fragmentary, we have collected the existing information on this topic in Sects. 3.2.5 and 3.3.3.2.

Using tobacco transgenic lines altered in the monolignol biosynthetic pathway and which differ in their lignin profiles we have evaluated lignin deposition at the cellular and subcellular levels using several microanalytical techniques. Surprisingly, whereas a Cinnamoyl CoA reductase (CCR) down-regulated line with a strong decrease in lignin content exhibited an overall reduction in lignin deposition in the walls of the different xylem cell types, this reduction was selectively targeted to the fibers in a double transformant (down-regulated for both CCR and Cinnamyl alcohol dehydrogenase (CAD)) displaying a similar degree of global lignin content decrease. Fiber and vessel secondary walls of the transgenic tobacco line homozygous for the ccr antisense gene (CCR.H) down-regulated plants were dramatically destructured, particularly in the S2 sublayer, whereas the deposition of lignins in the S1 sublayer was not significantly modified. In contrast, cell wall organization was slightly altered in xylem cells of the double transformant. The relative distribution of non-condensed and condensed units in lignin, evaluated microscopically with specific antibodies, was differentially affected in the transgenics studied and, in a general way, a drop in non-condensed lignin units (β− 0–4 interunit linkages) was associated with a loss of cohesion and extensive disorganization of the secondary wall. These results demonstrate that lignification is tightly and independently regulated in individual cell types and cell wall sublayers. They also show that down-regulation of specific genes may induce targeted changes in lignin structure and in spatial deposition patterns of the polymer. (Resume d'auteur)

The action of an abiotic lignin oxidant and a diffusible xylanase on wheat straw was studied and characterized at the levels of the molecular structures by chemical analysis and of the cell wall ultrastructure by transmission electron microscopy. While distinct chemical changes in the target polymers were observed when each system was used separately, a combination of the two types of catalysts did not significantly increase either lignin oxidation or hemicellulose hydrolysis. Microscopic observations however revealed that the supramolecular organization of the cell wall polymers was significantly altered. This suggests that the abiotic Mn-oxalate complex and the xylanase cooperate in modifying the cell wall architecture, without noticeably enhancing the degradation of the constitutive polymers.

The subcellular localization of the phosphatidylglycerol/phosphatidylinositol transfer protein (PG/PI-TP) of Aspergillus oryzae was investigated using Western blot analysis of the cell protein extracts, a cellular membrane fractionation technique, and transmission electron microscopy. The PG/PI-TP, as detected by Western blot analysis with a specific immune serum, was found to be mainly cytoplasmic and partly associated with intracellular membranes. A fractionation experiment was conducted after homogenization of the filamentous fungus mycelium. The endoplasmic reticulum, Golgi-like vesicles, and the plasma membrane were separated by isopycnic ultracentrifugation on a sucrose gradient, and our data revealed that the immunodetected PG/PI-TP was only associated with the Golgi-like apparatus. All these results were documented by electron microscopy and indicate here for the first time that there exists a specific phospholipid transfer protein in a filamentous fungus that is localized in the cytoplasm and associated with Golgi-like vesicles.Key words: phospholipid transfer protein, subcellular fractionation, ultrastructural localization, filamentous fungus, Aspergillus oryzae.

Several xyloglucan polysaccharides were biotinylated through their galactosyl residues, by combination of partial galactose oxidation and biotinamidocaproylhydrazide coupling. They were shown to easily bind to avidin activated ELISA plates by specific recognition of plant lectins Ulex europeaus (UEA-I) and Ricinus communis agglutinin (RCA-I). Subsequent chemical reduction of aldehyde groups after biotinylation was shown to improve immobilisation. UEA-I bound to cell wall xyloglucan but not to tamarind seed xyloglucan, due to the lack of fucose in the latter. RCA-I bound to all xyloglucans we tested, however, a higher affinity was observed with seed xyloglucan, suggesting it specifically clusters with the polysaccharide. The usefulness of using biotinylated xyloglucans for antibodies characterization was investigated. 1. Presented at the XVIIIth International Carbohydrate Symposium, Milan, Italy, July 21-26, 1996.

Lignin is an integral constituent of the primary cell walls of the dark-grown maize (Zea mays L.) coleoptile, a juvenile organ that is still in the developmental state of rapid cell extension. Coleoptile lignin was characterized by (i) conversion to lignothiolglycolate derivative, (ii) isolation of polymeric fragments after alkaline hydrolysis, (iii) reactivity to antibodies against dehydrogenative polymers prepared from monolignols, and (iv) identification of thioacidolysis products typical of lignins. Substantial amounts of lignin could be solubilized from the coleoptile cell walls by mild alkali treatments. Thioacidolysis analyses of cell walls from coleoptiles and various mesocotyl tissues demonstrated the presence of guaiacyl-, syringyl- and (traces of)p-hydroxyphenyl units besidesp-coumaric and ferulic acids. There are tissue-specific differences in amount and composition of lignins from different parts of the maize seedling. Electron-microscopic immunogold labeling of epitopes recognized by a specific anti-guaiacyl/syringyl antibody demonstrated the presence of lignin in all cell walls of the 4-d-old coleoptile. The primary walls of parenchyma and epidermis were more weakly labeled than the secondary wall thickenings of tracheary elements. No label was found in middle lamellae and cell corners. Lignin epitopes appeared first in the tracheary elements on day 2 and in the parenchyma on day 3 after sowing. Incubation of coleoptile segments in H2O2 increased the amount of extractable lignin and the abundance of lignin epitopes in the parenchyma cell walls. Lignin deposition was temporally and spatially correlated with the appearance of epitopes for prolinerich proteins, but not for hydroxyproline-rich proteins, in the cell walls. The lignin content of coleoptiles was increased by irradiating the seedlings with white or farred light, correlated with the inhibition of elongation growth, while growth promotion by auxin had no effect. It is concluded that wall stiffness, and thus extension growth, of the coleoptile can be controlled by lignification of the primary cell walls. Primary-wall lignin may represent part of an extended polysaccharide-polyphenol network that limits the extensibility of the cell walls.

Two wheat straw pulps (Kraft pulp and Chemimechanical pulp (CMP)) were treated with a crude enzymatic extract containing mainly manganese dependent peroxidase. The extract was prepared from the culture supernatant of a hypersecretory strain of Phanerochaete chrysosporium. Enzymatic treatment was applied to an unbleached pulp suspension (2% w/v). Lactate buffer (pH4.5) was used to regulate the pH at the MnP optimum activity and to stabilize the diffusing oxidative agent (Mn 3+ ). The enzymatic treatment was applied for 4 hours only. so as to ensure compatibility with industrial processes. After this treatment, the kappa number of unbleached Kraft pulp was reduced by about 50% and the consumption of bleaching reagent was subsequently reduced to the same extent. As with unbleached CMP, the enzymatic treatment substantially enhanced the physical properties of the pulps. In all the cases studied. transmission electron microscopy showed that structural changes had occurred in the treated fibres as compared with untreated samples. The main modification appeared to be a superficial defibrillation, which was sometimes accompanied by extensive delamination depending upon the extent to which the straw had been destructured by previous chemical and mechanical treatments.

The ultrastructural patterns characterizing wheat straw degradation by the ligninolytic fungi Phanerochaete chrysosporium and Trametes versicolor were studied. During fungal attack, the less lignified tissues were degraded first, whereas the xylematic and sclerenchymatic fibers underwent a delayed attack. In straw samples degraded by T. versicolor, partial delignification, defibrillation and swelling of cell walls, often causing separation between primary and secondary walls, were observed. By contrast, the formation of erosions and fissures, with minor lignin removal, characterized the attack to the cell wall by P. chrysosporium. At an advanced stage of decay, KMnO4 staining demonstrated abundant electron-dense material around hyphae and in the proximity of the cell-wall surface. In the case of P. chrysosporium, spherical black bodies were found in the erosions and fissures produced during fungal attack.

Pycnoporus cinnabarinus laccase and a chimeric laccase-CBM were applied in softwood kraft pulp biobleaching in the presence of 1-hydroxybenzotriazole (HBT). The presence of CBM could enhance the laccase biobleaching potential as a decrease in the enzymatic charge and chlorine dioxide consumption, as well as an increase in pulp brightness were observed. Laccase/HBT treatment could be improved by increasing oxygen pressure from 1 to 3bar and pulp consistency from 5% to 10%. Conversely, under the same conditions, no improvement of laccase-CBM/HBT treatment was observed, indicating a different behavior of both systems. However, laccase-CBM/HBT treatment led to a better preservation of pulp properties. This effect was probably due to fiber surface modifications involving the action of the CBM. Transmission electron microscopy examination of pulp fibers indicated a retention of laccase-CBM inside the pulp fibers due to CBM binding and an increased external microfibrillation of the fibers due to enzymatic treatments.

The transcriptional activator EgMYB2, which belongs to the large R2R3 MYB transcription factor family, plays a major role in the coordinated control of genes in the lignin biosynthetic pathway. Given that lignin genetic modification can lead to xylem alterations compromising vascular functionality, we characterised wood anatomical properties of two transgenic tobacco lines over-expressing EgMYB2, using light, fluorescence, confocal, transmission electron microscopy, immunocytochemical labelling and digital image analysis. Transgenic wood, compared with wild type, was characterised by both reduced frequency of larger vessels and lower vessel grouping; these traits are known to have physiological implications in terms of water transport efficiency and safety against embolism. Transgenic wood also appeared denser due to the occurrence of thicker cell walls and higher incidence of fibres than wild type. Increased lignin content was accompanied by a concomitant increase in cellulose and xylan, but no alterations in the usual distribution of guaiacyl and syringyl units in secondary cell walls were observed. Altogether, these results show that EgMYB2 is a master regulator controlling the synthesis of the three major polymers of the secondary cell wall and that its overexpression has significant influence on quantitative anatomical traits of wood which affect its functional properties.

Cinnamyl alcohol dehydrogenase (CAD) is a key enzyme involved in the last step of monolignol biosynthesis. The effect of CAD down-regulation on lignin production was investigated through a transgenic approach in maize. Transgenic CAD-RNAi plants show a different degree of enzymatic reduction depending on the analyzed tissue and show alterations in cell wall composition. Cell walls of CAD-RNAi stems contain a lignin polymer with a slight reduction in the S-to-G ratio without affecting the total lignin content. In addition, these cell walls accumulate higher levels of cellulose and arabinoxylans. In contrast, cell walls of CAD-RNAi midribs present a reduction in the total lignin content and of cell wall polysaccharides. In vitro degradability assays showed that, although to a different extent, the changes induced by the repression of CAD activity produced midribs and stems more degradable than wild-type plants. CAD-RNAi plants grown in the field presented a wild-type phenotype and produced higher amounts of dry biomass. Cellulosic bioethanol assays revealed that CAD-RNAi biomass produced higher levels of ethanol compared to wild-type, making CAD a good target to improve both the nutritional and energetic values of maize lignocellulosic biomass., This work was supported by the Spanish ‘Ministerio de Ciencia e Innovación’ (AGL2008–05157), the European Community (‘COPOL’ project: integrated control of polysaccharide and lignin biosynthesis to improve cellulose content and availability and fibre quality, QLK5-CT-2000–01493), and the CONSOLIDER-INGENIO program (CSD2007–00036). S.F. was financed by an I3P contract from the ‘Consejo Superior de Investigaciones Científicas’. D.C.-R. was initially financed by the Spanish ‘Ministerio de Educación y Ciencia’ (‘Ramón y Cajal’ Program). A.E. was financed by DGICYT (CGL2008–02470BOS) and Junta de Castilla y León (LE004A10-2). This work was carried out within the framework of the ‘Xarxa de Referència de Biotecnologia’ (XarBa) from the Autonomous Government of Catalonia.

Introduction Primary plant cell wall is synthesized around protoplast and its architecture is determined by a complex balance in the synthesis of several polysaccharides and glycoproteins which form an interwoven network organized around cellulose microfibrils [ 13. Therefore deposition and synthesis of cell-wall material must accompany cell progressive enlargement, and this necessitates a permanent rearrangement of the already deposited material and of the newly synthesized polymers. The chemical and biological nature of the rearrangements that occur within a given constituent polymer or between polymers, the site of their occurrence within the cell wall, and the physical, physiological and biochemical factors that control them, are still not clearly understood. Among the regulatory processes that control cell expansion, auxin-induced growth [2] involves a proton extrusion into the apoplast which may selectively activate wall-associated hydrolases with low pH optima [3]. Cleavage of hemicelluloses, especially xyloglucans (XGs), which are the predominant hemicelluloses in the primary wall of higher plants, has been observed in auxin-treated and acid-treated pea stems [4,5]. This degradation by wall-bound enzymes may have several consequences that serve cell-wall rearrangement. It may result in the breakage of XG interconnections between microfibrils [ 51, thus accounting for wall loosening, and it may at the same time result in the release of biologically active fragments with various lengths and structures. These biologically active oligosaccharides belong to the so-called oligosaccharins, which all possess signalling and regulatory activities [6].

Observations by electron microscopy of the micromorphological alterations caused in wood by fungal strains in which the cellulase system had been repressed or inhibited showed a substantial destruction of the cellulose network. The question thus arises which agents, other than enzymes, could be responsible for the modification of polysaccharides during fungal attack. Among the small diffusible agents possibly involved, activated oxygen species generated from hydrogen peroxide have been suggested. In particular the powerful oxidizing hydroxyl radical (· OH), which can be generated by reductive cleavage of H 2 O 2 or by reduction of oxygen, has been reported to take part in degradation of lignin by white- and brown-rot fungi. Manganic ions which are generated by manganese-dependent peroxidase (MnP) represent another diffusible oxidizing agent. To investigate whether these agents, produced by lignin-degrading enzymes, could also participate in wood polysaccharide degradation, the action of hydroxyl radicals and of some Mn(III)-organic acid complexes on carbohydrate and polysaccharide model compounds and also on wood and pulps, was studied. The action of ·OH, generated by the iron-catalyzed Fenton's reagent, on the glucuronoxylan from birch wood resulted in an extensive degradation of the hemicellulose (about 50% loss of carbohydrate after 180 min). A study of the degraded products suggests that internal cleavage occurs in the xylan chain accompanied by sugar ring degradation, the latter becoming predominant on the soluble oligomeric products. In a parallel study, the susceptibility of carbohydrates to oxidation by manganic ions showed that monosaccharide degradation occurred rapidly in strongly acidic medium. The mechanism which was studied with a Mn(III)-pyrophosphate complex, involves, as an initial step, the oxidative cleavage of C 1 with the formation of a lower carbohydrate, and then proceeds by a recurrent series of oxidations. However, the reaction seems to be controlled by the formation of a Mn(III)-pyrophosphate complex with the sugar, which prevents further oxidation. The two oxidizing agents were applied to birch wood wafers. The hydroxyl radicals had only a relatively weak degradative action on the cell walls. However, when the radicals were generated in situ, the extent of degradation as visualized by electron microscopy, gave images comparable to those obtained on fungal-degraded wood. Samples treated with manganic pyrophosphate and manganic organic acid complexes also showed typical degradation indicating that lignin was primarily degraded and also that hemi-celluloses had also been partly damaged.

During screening of basidiomycetes for wheat straw delignification, considerable lignin degradation with a limited attack to cellulose was attained with Pleurotus eryngii. Straw solid-state fermentation (SSF) was optimized, and the enzymatic mechanisms for lignin degradation were investigated. No lignin peroxidase was detected under liquid or SSF conditions, but high laccase and aryl-alcohol oxidase levels were found. The latter enzyme has been fully characterized in PI. eryngii and it seems to be involved in a cyclic redox system for H202 generation from aromatic compounds. Results obtained using homoveratric acid suggest that Pleurotus laccase could be involved in degradation of phenolic and non-phenolic lignin moieties. Histological and ultrastructural studies provided some general morphological characteristics of the fungal attack on wheat straw. Whereas a simultaneous degradation pattern was observed in straw treated with Phanerochaete chrysosporium, PI. eryngii caused partial degradation of middle lamella and separation of individual sclerenchymatic fibers. When these straw samples were subjected to refining tests, energy saving after biological treatment was the highest in the case of straw treated with PI. eryngii, which also produced the lowest substrate loss. From these results, a correlation between preferential removal of lignin, separation of sclerenchymatic fibers and pulping properties was provided during fungal treatment of wheat straw.

Premise Although many highly successful weed species use a ballistic seed dispersal mechanism, little is known about the mechanics of this process. Bittercress (Cardamine hirsuta) siliques are morphologically similar to Arabidopsis siliques, but they can project their seeds up to 5 m, while Arabidopsis seeds are dispersed by gravity. Comparison of these species should enable us to determine which structures might be responsible for ballistic seed dispersal. Methods Sections of Arabidopsis and bittercress siliques were immunolabeled with antibodies raised against a variety of polysaccharide epitopes. Results In bittercress, the second endocarp layer (enB) of the valve had strongly asymmetrical cell wall thickenings, whereas the analogous cells in Arabidopsis were reinforced symmetrically and to a lesser extent. Additionally, an accumulation of mucilaginous pectins was found between the first and second endocarp (enA and enB) layers in the bittercress valve that was not present in Arabidopsis. However, in both species, highly de-esterified homogalacturonan was lost in the dehiscence zone (at the carpel/replum interface) as the siliques matured, thus allowing for separation of the valve at maturity. Conclusions Ballistic seed dispersal in bittercress may involve the contraction of the outer pericarp tissue against the highly asymmetrically thickened enB cells, which are hypothesized to bend in one direction preferentially. The stress generated by the differential drying of the inner and outer layers of the valve is released suddenly as the adhesion between the cells of the dehiscence zone is lost, leading to a rapid coiling of the valve and dispersal of the seeds.

During cell wall formation and degradation, it is possible to detect cellulose microfibrils assembled into thicker and thinner lamellar structures, respectively, following inverse parallel patterns. The aim of this study was to analyse such patterns of microfibril aggregation and cell wall delamination. The thickness of microfibrils and lamellae was measured on digital images of both growing and degrading cell walls viewed by means of transmission electron microscopy. To objectively detect, measure and classify microfibrils and lamellae into thickness classes, a method based on the application of computerized image analysis combined with graphical and statistical methods was developed. The method allowed common classes of microfibrils and lamellae in cell walls to be identified from different origins. During both the formation and degradation of cell walls, a preferential formation of structures with specific thickness was evidenced. The results obtained with the developed method allowed objective analysis of patterns of microfibril aggregation and evidenced a trend of doubling/halving lamellar structures, during cell wall formation/degradation in materials from different origin and which have undergone different treatments.

International audience; A cinnamoyl-CoA reductase 1 knockout mutant in Arabidopsis thaliana was investigated for the consequences of lignin synthesis perturbation on the assembly of the cell walls. The mutant displayed a dwarf phenotype and a strong collapse of its xylem vessels corresponding to lower lignin content and a loss of lignin units of the noncondensed type. Transmission electron microscopy revealed that the transformation considerably impaired the capacity of interfascicular fibers and vascular bundles to complete the assembly of cellulose microfibrils in the S(2) layer, the S(1) layer remaining unaltered. Such disorder in cellulose was correlated with X-ray diffraction showing altered organization. Semi-quantitative immunolabeling of lignins showed that the patterns of distribution were differentially affected in interfascicular fibers and vascular bundles, pointing to the importance of noncondensed lignin structures for the assembly of a coherent secondary wall. The use of laser capture microdissection combined with the microanalysis of lignins and polysaccharides allowed these polymers to be characterized into specific cell types. Wild-type A. thaliana displayed a two-fold higher syringyl to guaiacyl ratio in interfascicular fibers compared with vascular bundles, whereas this difference was less marked in the cinnamoyl-CoA reductase 1 knockout mutant.

Summary Lignified cell walls are widely considered to be key innovations in the evolution of terrestrial plants from aquatic ancestors some 475 million years ago [1–3]. Lignins, complex aromatic heteropolymers, stiffen and fortify secondary cell walls within xylem tissues, creating a dense matrix that binds cellulose microfibrils [4] and crosslinks other wall components [5], thereby preventing the collapse of conductive vessels, lending biomechanical support to stems, and allowing plants to adopt an erect-growth habit in air. Although "lignin-like" compounds have been identified in primitive green algae [6, 7], the presence of true lignins in nonvascular organisms, such as aquatic algae, has not been confirmed [2, 3, 8, 9]. Here, we report the discovery of secondary walls and lignin within cells of the intertidal red alga Calliarthron cheilosporioides . Until now, such developmentally specialized cell walls have been described only in vascular plants. The finding of secondary walls and lignin in red algae raises many questions about the convergent or deeply conserved evolutionary history of these traits, given that red algae and vascular plants probably diverged more than 1 billion years ago.

15 pages, 9 figures.-- PMID: 18316315[PubMed].-- Supporting information available at: http://jxb.oxfordjournals.org/content/59/4/875/suppl/DC1, Xyloglucan endotransglucosylase/hydrolases (XTHs; EC 2.4.1.207 and/or EC 3.2.1.151) are enzymes involved in the modification of cell wall structure by cleaving and, often, also re-joining xyloglucan molecules in primary plant cell walls. Using a pool of antibodies raised against an enriched cell wall protein fraction, a new XTH cDNA in maize, ZmXTH1, has been isolated from a cDNA expression library obtained from the elongation zone of the maize root. The predicted protein has a putative N-terminal signal peptide and possesses the typical domains of this enzyme family, such as a catalytic domain that is homologous to that of Bacillus macerans beta-glucanase, a putative N-glycosylation motif, and four cysteine residues in the central and C terminal regions of the ZmXTH1 protein. Phylogenetic analysis of ZmXTH1 reveals that it belongs to subgroup 4, so far only reported from Poaceae monocot species. ZmXTH1 has been expressed in Pichia pastoris (a methylotrophic yeast) and the recombinant enzyme showed xyloglucan endotransglucosylase but not xyloglucan endohydrolase activity, representing the first enzyme belonging to subgroup 4 characterized in maize so far. Expression data indicate that ZmXTH1 is expressed in elongating tissues, modulated by culture conditions, and induced by gibberellins. Transient expression assays in onion cells reveal that ZmXTH1 is directed to the cell wall, although weakly bound. Finally, Arabidopsis thaliana plants expressing ZmXTH1 show slightly increased xyloglucan endohydrolase activity and alterations in the cell wall structure and composition., This work was funded by the Spanish ‘Ministerio de Ciencia y Tecnología’ (BIO2001-1140). VG was financed by a pre-doctoral grant from the ‘Generalitat de Catalunya’ (2003-FI00090). In addition, VG was funded by two grants from the Generalitat de Catalunya (2005-BE00104 and 2006-BE00668) for her work performed at Professor Fry's and Dr Ruel's laboratories. SF was financed by a post-doctoral grant from the ‘Generalitat de Catalunya’ (2003PIV-A-00033) and by an I3P contract from the ‘Consejo Superior de Investigaciones Científicas’. DC-R was financed by the Spanish ‘Ministerio de Educacion y Ciencia’ (‘Ramon y Cajal’ Program). This work was carried out within the framework of the ‘Xarxa de Referència en Biotecnologia’ from the ‘Generalitat de Catalunya’. SCF was funded by the UK Biotechnology and Biological Sciences Research Council. We are indebted to Dr Castresana (IBMB-CSIC) for his advice on the phylogenetic analyses, Dr Capellades for her technical support and the sequencing, and the greenhouse teams of IBMB-CSIC.

In view of tracing the fate of cellulose fine elements added to a suspension of cellulose fibers, a novel method for specific labeling of polysaccharides in a composite material was developed. The purpose was to visualize a given cellulose material within a cellulose mixture. The method consists of generating aldehyde groups in the chain by mild periodic acid oxidation followed by biotinylation of the carbonyls. Once added to the composite, the biotinylated molecules are labeled with streptavidin conjugated to a fluorescent probe for confocal microscopy, or streptavidin-gold for electron microscopy observations. In the present work, the fate of fresh fines (never-dried) and dead fines (dried) when they were added to a purified suspension of fibers was followed by observation of the labeling in confocal and electron microscopy. The differential mode of interaction of fresh fines and dead fines with the fibers was correlated to the mechanical characteristics measured on the corresponding papers. The versatility of the new labeling method and its possible generalization to other polysaccharides incorporated to a polysaccharide or nonpolysaccharide material should be of potential interest for the study of composite microstructure.

Background Cellulose Binding Domains (CBD) were conjugated with fluorescein isothiocyanate (FITC). The surface concentration of the Binding Domains adsorbed on cellulose fibres was determined by fluorescence image analysis. Results For a CBD-FITC concentration of 60 mg/L, a coating fraction of 78% and 110% was estimated for Portucel and Whatman fibres, respectively. For a saturating CBD concentration, using Whatman CF11 fibres, a surface concentration of 25.2 × 10-13 mol/mm2 was estimated, the equivalent to 4 protein monolayers. This result does not imply the existence of several adsorbed protein layers. Conclusion It was verified that CBDs were able to penetrate the fibres, according to confocal microscopy and TEM-immunolabelling analysis. The surface concentration of adsorbed CBDs was greater on amorphous fibres (phosphoric acid swollen) than on more crystalline ones (Whatman CF11 and Sigmacell 20)., Fundação para a Ciência e a Tecnologia (FCT) - SFRH/BD/6934/2001.

International audience; Cinnamoyl-CoA reductase 1 (CCR1, gene At1g15950) is the main CCR isoform implied in the constitutive lignification of Arabidopsis thaliana. In this work, we have identified and characterized two new knockout mutants for CCR1. Both have a dwarf phenotype and a delayed senescence. At complete maturity, their inflorescence stems display a 25–35% decreased lignin level, some alterations in lignin structure with a higher frequency of resistant interunit bonds and a higher content in cell wall-bound ferulic esters. Ferulic acid-coniferyl alcohol ether dimers were found for the first time in dicot cell walls and in similar levels in wild-type and mutant plants. The expression of CCR2, a CCR gene usually involved in plant defense, was increased in the mutants and could account for the biosynthesis of lignins in the CCR1-knockout plants. Mutant plantlets have three to four-times less sinapoyl malate (SM) than controls and accumulate some feruloyl malate. The same compositional changes occurred in the rosette leaves of greenhouse-grown plants. By contrast and relative to the control, their stems accumulated unusually high levels of both SM and feruloyl malate as well as more kaempferol glycosides. These findings suggest that, in their hypolignified stems, the mutant plants would avoid the feruloyl-CoA accumulation by its redirection to cell wall-bound ferulate esters, to feruloyl malate and to SM. The formation of feruloyl malate to an extent far exceeding the levels reported so far indicates that ferulic acid is a potential substrate for the enzymes involved in SM biosynthesis and emphasizes the remarkable plasticity of Arabidopsis phenylpropanoid metabolism

The composition and ultrastructural arrangement of cell wall polymers in wood fibres have determining influence on the properties of wood derived materials. It is therefore important to improve our understanding of the relationship between fibres organisation, the modifications induced by pulping treatments, and the resulting paper sheet mechanical properties. The different treatments to which fibres are subjected during the manufacturing of pulps and papers induce morphological and micro-structural alterations due to the removal of wall constituents and of microfibrillar elements. The impact of pulping processes on fibres was investigated at the ultrastructural scale of transmission electron microscopy. Particular attention was given to the effects of beating in refiners at various intensities on the ultrastructure of fibres. The most characteristic effects consisted of delaminations, microfibril disorganisation, and even fractures, of varying importance depending on the intensity of the mechanical refining. The consequences of internal alterations and surface modifications of the fibres were examined in relation to the paper sheet mechanical properties. Correlations between the type of alteration observed in the fibres and its possible impact on a given paper mechanical property are suggested. With similar approaches, the effects of drying and recycling were studied.

Cinnamoyl-CoA reductase (CCR) catalyzes the penultimate step in monolignol biosynthesis. We show that downregulation of CCR in transgenic poplar (Populus tremula × Populus alba) was associated with up to 50% reduced lignin content and an orange-brown, often patchy, coloration of the outer xylem. Thioacidolysis, nuclear magnetic resonance (NMR), immunocytochemistry of lignin epitopes, and oligolignol profiling indicated that lignin was relatively more reduced in syringyl than in guaiacyl units. The cohesion of the walls was affected, particularly at sites that are generally richer in syringyl units in wild-type poplar. Ferulic acid was incorporated into the lignin via ether bonds, as evidenced independently by thioacidolysis and by NMR. A synthetic lignin incorporating ferulic acid had a red-brown coloration, suggesting that the xylem coloration was due to the presence of ferulic acid during lignification. Elevated ferulic acid levels were also observed in the form of esters. Transcript and metabolite profiling were used as comprehensive phenotyping tools to investigate how CCR downregulation impacted metabolism and the biosynthesis of other cell wall polymers. Both methods suggested reduced biosynthesis and increased breakdown or remodeling of noncellulosic cell wall polymers, which was further supported by Fourier transform infrared spectroscopy and wet chemistry analysis. The reduced levels of lignin and hemicellulose were associated with an increased proportion of cellulose. Furthermore, the transcript and metabolite profiling data pointed toward a stress response induced by the altered cell wall structure. Finally, chemical pulping of wood derived from 5-year-old, field-grown transgenic lines revealed improved pulping characteristics, but growth was affected in all transgenic lines tested.

International audience; In adaptation to their function the walls of plant cell display tissue-specific variations of composition according to their developmental stage, cell type and stress of various origin. It is therefore important to obtain a precise analytical data describing the cell wall composition with respect to these different factors. In the present work, laser capture microdissection (LCM) was used for isolating different tissues from the stem of Urtica dioica L. at a semi-preparative scale. The technique was associated for the first time to a one-pot sequential cell wall preparation and hydrolysis for the carbohydrate analysis of each cell type. The results demonstrate that the combination of LCM and micro-analytical methods can provide individual cell type composition and should improve our knowledge of the biochemical diversity of cell walls in plants. This approach will be of potential interest for the understanding of the effects of stress or genetic engineering on the composition of the cell walls.

The macromolecular organization of the secondary wall of the cells from tree xylem is in large part responsible for the mechanical and physiological properties of wood. Modeling secondary walls of wood is difficult because information about their macromolecular architecture at the ultrastructural scale is missing. Numerous microscopic studies have provided views of the lignocellulosic composite material, but nanoscale distribution of the polymers and their interaction in muro is still not clearly understood. The intimate macromolecular organization of cell walls is defined during their differentiation. It is at the stage of wall thickening corresponding to secondary wall development that the topochemical organization and the interactions between cellulose, hemicelluloses and lignin are established. Using the conjunction of the high resolution of transmission electron microscopy (TEM) and the specificity of immunological probes directed against the main cell wall polymers, we investigated the deposition of hemicelluloses and lignins from the early stage of cambium differentiation to the mature fiber and vessel walls in growing model plants of Arabidopsis thaliana and poplar. TEM examination of differentiating cells as well as various wood and wood –derived materials and genetic plant mutants brought multiple evidence of the lamellar sub-organization of the secondary walls. Immuno-gold labeling showed that two structurally different xylan types were deposited at different stages in the wall thickening. Similarly two different types of lignin molecules were shown to be differentially polymerized at different steps of the building of the wall, lignin molecules of the condensed type being first deposited at the earliest stage of secondary thickening before the non-condensed types. This process may be modified in response to environmental factors, as in tension wood. The spatio-temporal relationships occurring between hemicelluloses, lignin and cellulose microfibrils (CMFs) during the secondary wall development suggest that xylans with less substituted chains would be more directly interacting with CMFs than those with higher substitution patterns. It also suggests that lignin molecules of the non-condensed type have a function in bringing cohesion between the lamellae of CMFs. A model of wall assembly during secondary thickening is proposed.

Transmission electron microscopy was used to investigate the ultrastructure of recycled pulp fibers originating from a household collection plant and intended for the production of packaging paper. Three recovered paper grades and recycling processes, including pulping, screening, cleaning and refining, were assessed with emphasis on surface and internal fibrillation as well as xylan localization. Results showed a large heterogeneity with respect to fiber ultrastructure within and between the grades. Screening and cleaning steps had no detectable effects, but refining clearly increased cell-wall delamination and surface fibrillation. Immunolabeling of xylans showed that they were distributed rather evenly across the cell walls. They were also present on fines. Two different mechanisms for fiber delamination and surface fibrillation were found, one which implies that internal and external fibrillation take place simultaneously across the cell wall, and another which implies successive peeling of layers or sub-layers from the outside towards the inside. It is suggested that recycled fibers of chemical pulp origin undergo the former mechanism and recycled fibers that contain lignin binding the cell wall matrix give rise to the latter peeling mechanism. Because several recycled fibers were severely delaminated and almost fractured, we suggest that to produce a good packaging paper, it is important that recycled pulp should contain a significant proportion of fibers with high intrinsic strength.

With a view to visualizing the ultrastructural distribution of syringyl lignins in secondary plant cell walls, a polyclonal antibody raised from a synthetic DHP polymer consisting only of syringyl propane units was prepared. To test the reactivity of the antiserum, a mini-dot-blot immunoassay reducing the amounts of substrates and antiserum was developed. A characteristic attribute of the S-antiserum appears to be its specific recognition of sequences of three or more consecutive syringyl units. On ultra-thin sections of model plants of Arabidopsis thaliana, Populus and tobacco, the antiserum allowed us to demonstrate a higher concentration of syringyl epitopes in fibres than in vessels. Variations in the distribution pattern of these epitopes between the three plants examined suggest that the synthesis of syringyl lignins in angiosperms depends on the species. To cite this article: J.-P. Joseleau et al., C. R. Biologies 327 (2004).

Oxalate is a common metabolite produced by almost all plant-pathogenic fungi. The degradation of cell wall from poplar chips and poplar sawdust by oxalate is reviewed here. Oxalate treatments decrease slightly the amount of sugars constituting hemicelluloses, but only in fibres and not in sawdust or wood chips. The examination of the cell wall ultrastructure of wood chips by transmission electron microscopy (TEM) after polysaccharide staining showed a characteristic fading of the staining of the S1/S2 and S2/S3 transition areas, supporting the idea that reactivity and organization of polysaccharides had changed after the oxalate treatments. Finally, all these changes enhanced the ability of the wood chips to be defibrated by a thermomechanical (TMP) process, as well as the further refining of the pulps. Looking at the fiber surface, it became apparent that fracture areas during the TMP pulping had moved toward the S2 layer, explaining why defibrating and refining occurred more easily, with less energy input in the process. To cite this article: V. Meyer-Pinson et al., C. R. Biologies 327 (2004).

International audience; Hardwood trees are able to reorient their axes owing to tension wood differentiation. Tension wood is characterised by important ultrastructural modifications, such as the occurrence in a number of species, of an extra secondary wall layer, named gelatinous layer or G-layer, mainly constituted of cellulose microfibrils oriented nearly parallel to the fibre axis. This G-layer appears directly involved in the definition of tension wood mechanical properties. This review gathers the data available in the literature about lignification during tension wood formation. Potential roles for lignin in tension wood formation are inferred from biochemical, anatomical and mechanical studies, from the hypotheses proposed to describe tension wood function and from data coming from new research areas such as functional genomics.

The occurrence of lignin in the additional gelatinous (G-) layer that differentiates in the secondary wall of hardwoods during tension wood formation has long been debated. In the present work, the ultrastructural distribution of lignin in the cell walls of normal and tension wood fibres from poplar (Populus deltoides Bartr. ex Marshall) was investigated by transmission electron microscopy using cryo-fixation-freeze-substitution in association with immunogold probes directed against typical structural motifs of lignin. The specificity of the immunological probes for condensed and non-condensed guaiacyl and syringyl interunit linkages of lignin, and their high sensitivity, allowed detection of lignin epitopes of definite chemical structures in the G-layer of tension wood fibres. Semi-quantitative distribution of the corresponding epitopes revealed the abundance of syringyl units in the G-layer. Predominating non-condensed lignin sub-structures appeared to be embedded in the crystalline cellulose matrix prevailing in the G-layer. The endwise mode of polymerization that is known to lead to these types of lignin structures appears consistent with such an organized cellulose environment. Immunochemical labelling provides the first visualization in planta of lignin structures within the G-layer of tension wood. The patterns of distribution of syringyl epitopes indicate that syringyl lignin is deposited more intensely in the later phase of fibre secondary wall assembly. The data also illustrate that syringyl lignin synthesis in tension wood fibres is under specific spatial and temporal regulation targeted differentially throughout cell wall layers.

Cinnamoyl CoA reductase (CCR; EC 1.2.1.44) is the first enzyme specific to the biosynthetic pathway leading to monolignols. Arabidopsis thaliana (L.) Heynh. plants transformed with a vector containing a full-length AtCCR1 cDNA in an antisense orientation were obtained and characterized. The most severely down-regulated homozygous plants showed drastic alterations to their phenotypical features. These plants had a 50% decrease in lignin content accompanied by changes in lignin composition and structure, with incorporation of ferulic acid into the cell wall. Microscopic analyses coupled with immunolabelling revealed a decrease in lignin deposition in normally lignified tissues and a dramatic loosening of the secondary cell wall of interfascicular fibers and vessels. Evaluation of in vitro digestibility demonstrated an increase in the enzymatic degradability of these transgenic lines. In addition, culture conditions were shown to play a substantial role in lignin level and structure in the wild type and in the effects of AtCCR1 repression efficiency.

Inhibition of specific lignin biosynthetic steps by antisense strategy has previously been shown to alter lignin content and/or structure. In this work, homozygous tobacco (Nicotiana tabacum) lines transformed with cinnamoyl-coenzyme A reductase (CCR) or caffeic acid/5-hydroxy ferulic acid-O-methyltransferase I (COMT I) antisense sequences have been crossed and enzyme activities, lignin synthesis, and cell wall structure of the progeny have been analyzed. In single transformed parents, CCR inhibition did not affect COMT I expression, whereas marked increases in CCR activity were observed in COMT I antisense plants, suggesting potential cross talk between some genes of the pathway. In the progeny, both CCR and COMT I activities were shown to be markedly decreased due to the simultaneous repression of the two genes. In these double transformants, the lignin profiles were dependent on the relative extent of down-regulation of each individual enzyme. For the siblings issued from a strongly repressed antisense CCR parent, the lignin patterns mimicked the patterns obtained in single transformants with a reduced CCR activity. In contrast, the specific lignin profile of COMT I repression could not be detected in double transformed siblings. By transmission electron microscopy some cell wall loosening was detected in the antisense CCR parent but not in the antisense COMT I parent. In double transformants, immunolabeling of non-condensed guaiacyl-syringyl units was weaker and revealed changes in epitope distribution that specifically affected vessels. Our results more widely highlight the impact of culture conditions on phenotypes and gene expression of transformed plants.

Morphology, wood structure and cell wall composition of 35S-rolC transgenic hybrid aspen (P. tremula×tremuloides) were compared with non-transformed control trees. The transgenics are characterised by stunted growth, altered physiological parameters and light green leaves of reduced size. Histometric measurements revealed thinner fibre walls as compared to the controls. UV microspectrophotometry of individual wall layers did not reveal distinctive differences in the lignification of xylem cells, but in the extremely thin-walled fibres of the transgenics the secondary walls were less lignified as revealed by KMnO4 staining in transmission electron microscopy. In the transgenics the formation of xylem cells was delayed and the differentiation zone reduced to only a few rows. Immunocytochemical analyses revealed the deposition of lignins in less differentiated xylem cells as compared to the controls. The first labelling of condensed lignin appeared in cell corners and of non-condensed lignin in secondary walls near cell corners during the deposition of S1 polysaccharides. Because of alterations in the formation and differentiation of xylem cells, 35S-rolC transgenic aspen may be useful for studies on molecular factors controlling the differentiation continuum.