Search

In this investigation, new composites of cerium oxide were incorporated in the copper-based metal–organic framework using trimesic acid by the precipitation method. Synthesized Cu-MOF/CeO2 nanocomposite is characterized by numerous analytical methods to interpret their structure, morphology, and thermal behaviour. Surface micrograph analysis revealed that spherical particles and cerium oxide nanoparticles are embedded in the Cu-MOF matrix. The prepared nanocomposite shows a lesser onset potential and overpotential with a high current density (18.6 mA cm−2). The Cu-MOF/CeO2 composite exhibits a small Tafel slope of 54.6 mV dec-1 and suggests that the hydrogen evolution reaction follows the Heyrovsky mechanism. On the other hand, five different MOF/CeO2 nanocomposite concentrations were tested on a human osteosarcoma cell line (MG63). The 50% cell mortality was observed at 97.9 μg/ml and it proved less cytotoxicity effect with better biocompatibility. Thus, overall results showed that the nanocomposite as an efficient electrocatalyst towards hydrogen evolution reaction and targeted drug delivery applications.

The purpose of this research was to investigate the possible antibacterial, antifungal, antioxidant, and anticancer effects of nickel (Ni2+)-doped hydroxyapatite (HAp) nanoparticles (NPs) synthesized using the sol–gel approach. X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy (Raman), field-emission scanning electron microscopy (FESEM), and elemental analysis were used to characterize the Ni2+-doped HApNPs. X-ray diffraction investigation showed that the nanoscale structure of Ni2+-doped HApNPs was hexagonal, with an average crystallite size of 39.91 nm. Ni2+-doped HApNPs were found to be almost spherical in form and 40–50 nm in size, as determined by FESEM analysis. According to EDAX, the atomic percentages of Ca, O, P, and Ni were 20.93, 65.21, 13.32, and 0.55, respectively. Ni2+-doped HApNPs exhibited substantial antibacterial properties when tested in vitro against several pathogens, including Escherichia coli, Shigella flexneri, Klebsiella pneumoniae, Pseudomonas aeruginosa, and Staphylococcus aureus. Antibacterial activity, at 50 mg tested concentration, demonstrated superior effects on G-ve bacteria than G+ve pathogens. The antifungal activity of Oidium caricae, Aspergillus flavus, and A. niger revealed a zone of inhibition of 23, 11, and 5 mm, respectively. These actions rely on the organism’s cell wall structure, size, and shape. Incorporating Ni2+ into HApNPs allows them to function as powerful antioxidants. Ni2+-doped HApNPs had a good cytotoxic impact against the HeLa cell line, which improved with increasing concentration and was detected at a 68.81 µg/mL dosage. According to the findings of this study, the Ni2+-doped HApNPs are extremely promising biologically active candidates owing to their improved functional features.

The utilization of biopolymers incorporated with antimicrobial agents is extremely interesting in the development of environmentally friendly functional materials for food packaging and other applications. In this study, the effect of calcium oxide (CaO) on the morphological, mechanical, thermal, and hydrophilic properties as well as the antimicrobial activity of carboxymethyl chitosan (CMCH) bio-composite films was investigated. The CMCH was synthesized from shrimp chitosan through carboxymethylation, whereas the CaO was synthesized via a co-precipitation method with polyethylene glycol as a stabilizer. The CMCH-CaO bio-composite films were prepared by the addition of synthesized CaO into the synthesized CMCH using a facile solution casting method. As confirmed by XRD and SEM, the synthesized CaO has a cubic shape, with an average crystalline size of 25.84 nm. The synthesized CaO exhibited excellent antimicrobial activity against Escherichia coli ( E. coli ) and Staphylococcus aureus ( S. aureus ) (>99.9% R). The addition of CaO into CMCH improved the mechanical and hydrophobic properties of the CMCH-CaO films. However, it resulted in a slight decrease in thermal stability. Notably, the CMCH-CaO10% films exhibited exceptional antimicrobial activity against E. coli (98.8% R) and S. aureus (91.8% R). As a result, such bio-composite films can be applied as an active packaging material for fruit, vegetable, or meat products.

Cellulose from different species of bamboo ( Thyrsostachys siamesi Gamble, Dendrocalamus sericeus Munro (DSM), Bambusa logispatha , and Bambusa sp.) was converted to cellulose nanocrystals (CNCs) by a chemical-mechanical method. First, bamboo fibers were pre-treated (removal of lignin and hemicellulose) to obtain cellulose. Next, the cellulose was hydrolyzed with sulfuric acid using ultrasonication to obtain CNCs. The diameters of CNCs are in the range of 11-375 nm. The CNCs from DSM showed the highest yield and crystallinity, which was chosen in the film fabrication. The plasticized cassava starch-based films with various amounts (0-0.6 g) of CNCs (from DSM) were prepared and characterized. As the number of CNCs in cassava starch-based films increased, water solubility and the water vapor permeability of CNCs decreased. In addition, the atomic force microscope of the nanocomposite films showed that CNC particles were dispersed uniformly on the surface of cassava starch-based film at 0.2 and 0.4 g content. However, the number of CNCs at 0.6 g resulted in more CNC agglomeration in cassava starch-based films. The 0.4 g CNC in cassava starch-based film was found to have the highest tensile strength (4.2 MPa). Cassava starch-incorporated CNCs from bamboo film can be applied as a biodegradable packaging material.

Sulfur hexafluoride (SF 6 ) plasma at different pressures, powers, and times was used to treat Kraft paper (KP) to enhance its water resistance. The KP was treated with SF 6 plasma from 20-300 mTorr of pressure at powers from 25-75 Watts and treatment times from 1-30 min at 13.56 MHz. The prepared papers were characterized by contact angle measurement and water absorption. The selected optimum condition for the plasma-treated KP was 200 mTorr at 50 Watts for 5 min. Advancement with the change in treatment times (3, 5, and 7 min) on the physical and mechanical properties, water resistance, and morphology of KP with SF 6 plasma at 200 mTorr and 50 Watts was evaluated. The changes in the chemical compositions of the plasma-treated papers were analyzed with an XPS analysis. The treatment times of 0, 3, 5, and 7 min revealed fluorine/carbon (F/C) atomic concentration percentages at 0.00/72.70, 40.48/40.97, 40.18/37.95, and 45.72/39.48, respectively. The XPS spectra showed three newly raised peaks at 289.7~289.8, 291.5~291.7, and 293.4~293.6 eV in the 3, 5, and 7 min plasma-treated KPs belonging to the CF, CF 2 , and CF 3 moieties. The 5 min plasma-treated paper promoted a better interaction between the SF 6 plasma and the paper yielded by the F atoms. As the treatment time for the treated KPs increased, the contact angle, water absorption time, and Cobb test values increased. However, the thickness and tensile strength did not show remarkable changes. The SEM images revealed that, as the treatment time increased, the surface roughness of the plasma-treated KPs also increased, leading to improved water resistance properties. Overall, the SF 6 plasma treatment modified the surface at the nano-layer range, creating super-hydrophobicity surfaces.

Nowadays, infectious diseases persist as a global crisis by causing significant destruction to public health and the economic stability of countries worldwide. Especially bacterial infections remain a most severe concern due to the prevalence and emergence of multi-drug resistance (MDR) and limitations with existing therapeutic options. Antibacterial photodynamic therapy (APDT) is a potential therapeutic modality that involves the systematic administration of photosensitizers (PSs), light, and molecular oxygen (O 2 ) for coping with bacterial infections. Although the existing porphyrin and non-porphyrin PSs were effective in APDT, the poor solubility, limited efficacy against Gram-negative bacteria, and non-specific distribution hinder their clinical applications. Accordingly, to promote the efficiency of conventional PSs, various polymer-driven modification and functionalization strategies have been adopted to engineer multifunctional hybrid phototherapeutics. This review assesses recent advancements and state-of-the-art research in polymer-PSs hybrid materials developed for APDT applications. Further, the key research findings of the following aspects are considered in-depth with constructive discussions: i) PSs-integrated/functionalized polymeric composites through various molecular interactions; ii) PSs-deposited coatings on different substrates and devices to eliminate healthcare-associated infections; and iii) PSs-embedded films, scaffolds, and hydrogels for regenerative medicine applications., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2022 The Authors.)

Solvothermal synthesis was used to investigate the formation of zinc oxide (ZnO) nanoparticles (NPs). A series of ZnO NPs was synthesized with different relative ratios of didodecyldimethylammonium bromide (DDAB) and zinc nitrate (ZN). The variation in the molarity influenced the crystallinity, size, and morphology of the obtained ZnO NPs. X-ray diffraction, Fourier-transform infrared spectroscopy, field-emission scanning electron microscopy, high-resolution transmission electron microscopy, and zeta potential analysis were used to study the characteristic features of the ZnO NPs. The ZnO surface charge, size, and morphological structure were highly reliant on the concentrations of DDAB and ZN. With increasing relative ratio of DDAB to ZN, the particle size of ZnO NPs decreased and the surface charge increased to higher positive value. The ZnO NPs synthesized with cationic liquid DDAB presented enhanced performance in preventing the growth of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) strains. The antibacterial activity of ZnO NPs have direct contact with the microbial cell wall resulting in destruction of bacterial cell integrity, release of antimicrobial Zn 2+ ions, and induce cell death. This is due to the positively charged smaller ZnO NPs, prepared with DDAB cationic surfactant, effectively acting as an antimicrobial agent against food-borne pathogenic bacteria., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The development of a universal coating strategy for the construction of functional surfaces and modulation of surface properties is of great research interest. Tannic acid (TA) could serve as a sole precursor for the deposition of colorless coatings on substrate surfaces. However, the deposition of TA requires a high salt concentration (0.6 M), which may limit its practical application. Herein, primary amine moieties were introduced on the gallic acid groups in TA. The resultant amine-containing TA derivative (TAA) can self-polymerize under mild conditions (10 mM, Tris buffer), and form uniform and colorless coatings in a material-independent manner. In comparison with the TA coating under the same preparation conditions, the TAA coating exhibits an increased thickness as measured by ellipsometry. The TAA coating is adapted for secondary surface functionalization. The hydrophilic mPEG brushes can be grafted on the TAA coating to inhibit non-specific protein adsorption. A biotin probe can be immobilized on the TAA coating to promote specific binding with avidin. In addition, the TAA coating can be utilized for in situ reduction of silver ions to AgNPs. The resulting AgNP-loaded TAA coating can inhibit bacterial adhesion and prevent biofilm formation.

A series of PLA/ZnO bionanocomposite films were prepared by introducing positively surface charged zinc oxide nanoparticles (ZnO NPs) into biodegradable poly(lactic acid) (PLA) by the solvent casting method, and their physical properties and antibacterial activities were evaluated. The physical properties and antibacterial efficiencies of the bionanocomposite films were strongly dependent on the ZnO NPs content. The bionanocomposite films with over 3% ZnO NPs exhibited a rough surface, poor dispersion, hard agglomerates, and voids, leading to a reduction in the crystallinity and morphological defects. With the increasing ZnO NPs content, the thermal stability and barrier properties of the PLA/ZnO bionanocomposite films were decreased while their hydrophobicity increased. The bionanocomposite films showed appreciable antimicrobial activity against Staphylococcus aureus and Escherichia coli . Especially, the films with over 3% of ZnO NPs exhibited a complete growth inhibition of E. coli. The strong interactions between the positively charged surface ZnO NPs and negatively charged surface of the bacterial membrane led to the production of reactive oxygen species (ROS) and eventually bacterial cell death. Consequently, these PLA/ZnO bionanocomposite films can potentially be used as a food packaging material with excellent UV protective and antibacterial properties., Competing Interests: The authors declare no conflicts of interest.

Mg-doped zinc oxide (Zn 1-x Mg x O, where x = 0.000, 0.001, 0.003, 0.005, and 0.010 M) nanoparticles (MgZnO NPs) were synthesized via a co-precipitation method and subjected to various analyses for application as functional additives in food packaging. The MgZnO NPs were successfully formed at approximately 360 °C and showed an increase in the optical band gap with respect to the increase in the concentration of Mg doping. The X-ray diffraction and scanning electron microscopy analyses of MgZnO NPs confirmed the formation of hexagonal wurtzite structure and rod-like morphology. X-ray photoelectron spectra revealed that the Mg (1s) peaks centered at 1303.35 and 1303.38 eV were ascribed to the presence of Mg 2+ replacing Zn 2+ . Transmission electron microscopy images showed rod shapes with the length of 208-650nm and width of 84-142 nm. Various concentrations of synthesized MgZnO NPs were investigated against a gram-negative (Escherichia coli - DH5α) bacterial strain under light and dark conditions. Among the studied samples, 0.010 M MgZnO NPs of concentration 3 mg/mL showed the best antibacterial activity under the light condition. MgZnO NPs revealed uneven ridges on the outer surface, which promote the diffusion ability of Zn 2+ and increased production of reactive oxygen species, and consequently lead to bacterial lysis. Furthermore, this study demonstrates excellent feasibility for the application of MgZnO NPs as fillers with good antibacterial activity, especially in antimicrobial food packaging applications., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In the present work, we report the synthesis of chitosan:starch‑silver nanoparticle (Cht:St-AgNPs) coated papers for antimicrobial packaging applications. The starch-assisted synthesized St-AgNPs are spherical in shape with an average particle size of 7 nm. Chitosan was mixed into the synthesized St-AgNPs solution with different ratios of 9:1, 8:2, 7:3, and 5:5 by weight. Further, the influence of different ratios of Cht:St-AgNPs on the various paper properties such as mechanical properties, water and oil resistance, and antimicrobial activities was investigated. It was observed that the properties of the coated papers were strongly dependent on the composition of Cht:St-AgNPs. The Cht:St-AgNPs-coated paper prepared with the ratio of 9:1 showed excellent mechanical properties and good resistance properties against water and oil. The Cht:St-AgNPs coated papers showed a remarkable enhancement in mechanical strength, oil and water resistance, and antibacterial and antifungal activity, which can make them a potential candidate for functional antimicrobial packaging applications., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Background: ST-246® is an antiviral, orally bioavailable small molecule in clinical development for treatment of orthopoxvirus infections. An intravenous (i.v.) formulation may be required for some hospitalized patients who are unable to take oral medication. An i.v. formulation has been evaluated in three species previously used in evaluation of both efficacy and toxicology of the oral formulation., Methodology/principal Findings: The pharmacokinetics of ST-246 after i.v. infusions in mice, rabbits and nonhuman primates (NHP) were compared to those obtained after oral administration. Ten minute i.v. infusions of ST-246 at doses of 3, 10, 30, and 75 mg/kg in mice produced peak plasma concentrations ranging from 16.9 to 238 µg/mL. Elimination appeared predominately first-order and exposure dose-proportional up to 30 mg/kg. Short i.v. infusions (5 to 15 minutes) in rabbits resulted in rapid distribution followed by slower elimination. Intravenous infusions in NHP were conducted at doses of 1 to 30 mg/kg. The length of single infusions in NHP ranged from 4 to 6 hours. The pharmacokinetics and tolerability for the two highest doses were evaluated when administered as two equivalent 4 hour infusions initiated 12 hours apart. Terminal elimination half-lives in all species for oral and i.v. infusions were similar. Dose-limiting central nervous system effects were identified in all three species and appeared related to high C(max) plasma concentrations. These effects were eliminated using slower i.v. infusions., Conclusions/significance: Pharmacokinetic profiles after i.v. infusion compared to those observed after oral administration demonstrated the necessity of longer i.v. infusions to (1) mimic the plasma exposure observed after oral administration and (2) avoid C(max) associated toxicity. Shorter infusions at higher doses in NHP resulted in decreased clearance, suggesting saturated distribution or elimination. Elimination half-lives in all species were similar between oral and i.v. administration. The administration of ST-246 was well tolerated as a slow i.v. infusion.